{"id":"CVE-2026-17052","aliases":["EUVD-2026-84054","GHSA-8qw6-x76h-8mpc"],"status":"published","title":"Missing user-pointer validation in tgpio_pin_read_ts_ec syscall handler allows arbitrary supervisor-memory write from userspace","description":"The Time-aware GPIO syscall verification handler z_vrfy_tgpio_pin_read_ts_ec() in drivers/timeaware_gpio/timeaware_gpio_handlers.c validated only the port device object and passed the caller-supplied timestamp and event_count output pointers to the driver without a K_SYSCALL_MEMORY_WRITE() check. The other handlers in the same file (z_vrfy_tgpio_port_get_time(), z_vrfy_tgpio_port_get_cycles_per_second()) already performed that check, so the omission left one syscall unguarded.\n\ntgpio_pin_read_ts_ec() is declared __syscall, so with CONFIG_USERSPACE=y an unprivileged user-mode thread that has been granted access to the TGPIO device object can invoke it with arbitrary pointer values. tgpio_intel_read_ts_ec() in drivers/timeaware_gpio/timeaware_gpio_intel.c bounds-checks only the pin index and then unconditionally performs timestamp = ... and event_count = ..., executing two 8-byte stores in supervisor mode at addresses chosen by the user-mode caller.\n\nThe result is a write-what-where primitive that crosses the userspace/kernel boundary: the target address is fully attacker-chosen and the stored values are the hardware time-capture and event-counter register contents. Corrupting kernel data structures this way can escalate the calling thread to supervisor privilege or crash the system; the device-object permission required is a narrow capability that is not intended to confer any kernel-memory access. The fix adds the two missing K_SYSCALL_MEMORY_WRITE() validations before the driver call.\n\nExposure is narrow in practice. Only builds with CONFIG_USERSPACE=y and CONFIG_TIMEAWARE_GPIO=y compile the affected file, and from v3.6.0 onward the file additionally referenced a relocated header (\u003czephyr/syscall_handler.h\u003e) and removed Z_SYSCALL_* macros, so such a configuration failed to build until those were repaired after v4.4.0. Downstream trees that locally corrected that breakage, and v3.5.0 builds where it did not exist, are the exposed population.","severity":{"version":"3.1","score":7.8,"vector":"CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H","level":"high","assessor":"cna","from":"cve"},"epss":{"day":"2026-11-11","score":0.00165,"percentile":0.05799,"model":"v2026.06.15"},"facts":{"in_kev":false,"known_exploited":false,"public_exploit":false,"fix_available":false},"cwes":["CWE-787"],"published":"2026-09-21T18:35:30Z","modified":"2026-11-04T05:00:19Z","products":[{"vendor":"zephyrproject","product":"zephyr"},{"vendor":"zephyrproject-rtos","product":"zephyr"}],"references":[{"url":"https://github.com/zephyrproject-rtos/zephyr/commit/26264fffc17c2174319394ffa274af3f6efdc221","tags":["patch","fix"]},{"url":"https://github.com/zephyrproject-rtos/zephyr/security/advisories/GHSA-8qw6-x76h-8mpc","tags":["advisory"]},{"url":"https://github.com/CVEProject/cvelistV5/tree/main/cves/2026/17xxx/CVE-2026-17052.json","tags":["advisory"]},{"url":"https://nvd.nist.gov/vuln/detail/CVE-2026-17052","tags":["advisory"]},{"url":"https://github.com/zephyrproject-rtos/zephyr","tags":["package"]}],"sources":{"cve":[{"id":"CVE-2026-17052","title":"Missing user-pointer validation in tgpio_pin_read_ts_ec syscall handler allows arbitrary supervisor-memory write from userspace","description":"The Time-aware GPIO syscall verification handler z_vrfy_tgpio_pin_read_ts_ec() in drivers/timeaware_gpio/timeaware_gpio_handlers.c validated only the port device object and passed the caller-supplied timestamp and event_count output pointers to the driver without a K_SYSCALL_MEMORY_WRITE() check. The other handlers in the same file (z_vrfy_tgpio_port_get_time(), z_vrfy_tgpio_port_get_cycles_per_second()) already performed that check, so the omission left one syscall unguarded.\n\ntgpio_pin_read_ts_ec() is declared __syscall, so with CONFIG_USERSPACE=y an unprivileged user-mode thread that has been granted access to the TGPIO device object can invoke it with arbitrary pointer values. tgpio_intel_read_ts_ec() in drivers/timeaware_gpio/timeaware_gpio_intel.c bounds-checks only the pin index and then unconditionally performs timestamp = ... and event_count = ..., executing two 8-byte stores in supervisor mode at addresses chosen by the user-mode caller.\n\nThe result is a write-what-where primitive that crosses the userspace/kernel boundary: the target address is fully attacker-chosen and the stored values are the hardware time-capture and event-counter register contents. Corrupting kernel data structures this way can escalate the calling thread to supervisor privilege or crash the system; the device-object permission required is a narrow capability that is not intended to confer any kernel-memory access. The fix adds the two missing K_SYSCALL_MEMORY_WRITE() validations before the driver call.\n\nExposure is narrow in practice. Only builds with CONFIG_USERSPACE=y and CONFIG_TIMEAWARE_GPIO=y compile the affected file, and from v3.6.0 onward the file additionally referenced a relocated header (\u003czephyr/syscall_handler.h\u003e) and removed Z_SYSCALL_* macros, so such a configuration failed to build until those were repaired after v4.4.0. Downstream trees that locally corrected that breakage, and v3.5.0 builds where it did not exist, are the exposed population.","status":"published","published":"2026-09-21T18:35:30.081Z","modified":"2026-11-04T05:00:19.648Z","cvss":[{"version":"3.1","score":7.8,"vector":"CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H","level":"high","assessor":"cna"}],"cwes":["CWE-787"],"updated_at":"2026-11-04T05:21:48.223566Z"}],"euvd":[{"id":"EUVD-2026-84054","description":"The Time-aware GPIO syscall verification handler z_vrfy_tgpio_pin_read_ts_ec() in drivers/timeaware_gpio/timeaware_gpio_handlers.c validated only the port device object and passed the caller-supplied timestamp and event_count output pointers to the driver without a K_SYSCALL_MEMORY_WRITE() check. The other handlers in the same file (z_vrfy_tgpio_port_get_time(), z_vrfy_tgpio_port_get_cycles_per_second()) already performed that check, so the omission left one syscall unguarded.\n\ntgpio_pin_read_ts_ec() is declared __syscall, so with CONFIG_USERSPACE=y an unprivileged user-mode thread that has been granted access to the TGPIO device object can invoke it with arbitrary pointer values. tgpio_intel_read_ts_ec() in drivers/timeaware_gpio/timeaware_gpio_intel.c bounds-checks only the pin index and then unconditionally performs timestamp = ... and event_count = ..., executing two 8-byte stores in supervisor mode at addresses chosen by the user-mode caller.\n\nThe result is a write-what-where primitive that crosses the userspace/kernel boundary: the target address is fully attacker-chosen and the stored values are the hardware time-capture and event-counter register contents. Corrupting kernel data structures this way can escalate the calling thread to supervisor privilege or crash the system; the device-object permission required is a narrow capability that is not intended to confer any kernel-memory access. The fix adds the two missing K_SYSCALL_MEMORY_WRITE() validations before the driver call.\n\nExposure is narrow in practice. Only builds with CONFIG_USERSPACE=y and CONFIG_TIMEAWARE_GPIO=y compile the affected file, and from v3.6.0 onward the file additionally referenced a relocated header (\u003czephyr/syscall_handler.h\u003e) and removed Z_SYSCALL_* macros, so such a configuration failed to build until those were repaired after v4.4.0. Downstream trees that locally corrected that breakage, and v3.5.0 builds where it did not exist, are the exposed population.","status":"published","published":"2026-09-21T18:35:30Z","modified":"2026-11-04T05:00:19Z","cvss":[{"version":"3.1","score":7.8,"vector":"CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H","level":"high"}],"updated_at":"2026-11-04T07:00:56.720215Z"}],"nvd":[{"id":"CVE-2026-17052","description":"The Time-aware GPIO syscall verification handler z_vrfy_tgpio_pin_read_ts_ec() in drivers/timeaware_gpio/timeaware_gpio_handlers.c validated only the port device object and passed the caller-supplied timestamp and event_count output pointers to the driver without a K_SYSCALL_MEMORY_WRITE() check. The other handlers in the same file (z_vrfy_tgpio_port_get_time(), z_vrfy_tgpio_port_get_cycles_per_second()) already performed that check, so the omission left one syscall unguarded.\n\ntgpio_pin_read_ts_ec() is declared __syscall, so with CONFIG_USERSPACE=y an unprivileged user-mode thread that has been granted access to the TGPIO device object can invoke it with arbitrary pointer values. tgpio_intel_read_ts_ec() in drivers/timeaware_gpio/timeaware_gpio_intel.c bounds-checks only the pin index and then unconditionally performs timestamp = ... and event_count = ..., executing two 8-byte stores in supervisor mode at addresses chosen by the user-mode caller.\n\nThe result is a write-what-where primitive that crosses the userspace/kernel boundary: the target address is fully attacker-chosen and the stored values are the hardware time-capture and event-counter register contents. Corrupting kernel data structures this way can escalate the calling thread to supervisor privilege or crash the system; the device-object permission required is a narrow capability that is not intended to confer any kernel-memory access. The fix adds the two missing K_SYSCALL_MEMORY_WRITE() validations before the driver call.\n\nExposure is narrow in practice. Only builds with CONFIG_USERSPACE=y and CONFIG_TIMEAWARE_GPIO=y compile the affected file, and from v3.6.0 onward the file additionally referenced a relocated header (\u003czephyr/syscall_handler.h\u003e) and removed Z_SYSCALL_* macros, so such a configuration failed to build until those were repaired after v4.4.0. Downstream trees that locally corrected that breakage, and v3.5.0 builds where it did not exist, are the exposed population.","status":"published","published":"2026-09-21T19:17:04.08Z","modified":"2026-11-04T05:18:45.737Z","cvss":[{"version":"3.1","score":7.8,"vector":"CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H","level":"high","assessor":"secondary"}],"cwes":["CWE-787"],"updated_at":"2026-11-04T06:53:22.975398Z"}],"osv":[{"id":"CVE-2026-17052","title":"Missing user-pointer validation in tgpio_pin_read_ts_ec syscall handler allows arbitrary supervisor-memory write from userspace","description":"The Time-aware GPIO syscall verification handler z_vrfy_tgpio_pin_read_ts_ec() in drivers/timeaware_gpio/timeaware_gpio_handlers.c validated only the port device object and passed the caller-supplied timestamp and event_count output pointers to the driver without a K_SYSCALL_MEMORY_WRITE() check. The other handlers in the same file (z_vrfy_tgpio_port_get_time(), z_vrfy_tgpio_port_get_cycles_per_second()) already performed that check, so the omission left one syscall unguarded.\n\ntgpio_pin_read_ts_ec() is declared __syscall, so with CONFIG_USERSPACE=y an unprivileged user-mode thread that has been granted access to the TGPIO device object can invoke it with arbitrary pointer values. tgpio_intel_read_ts_ec() in drivers/timeaware_gpio/timeaware_gpio_intel.c bounds-checks only the pin index and then unconditionally performs timestamp = ... and event_count = ..., executing two 8-byte stores in supervisor mode at addresses chosen by the user-mode caller.\n\nThe result is a write-what-where primitive that crosses the userspace/kernel boundary: the target address is fully attacker-chosen and the stored values are the hardware time-capture and event-counter register contents. Corrupting kernel data structures this way can escalate the calling thread to supervisor privilege or crash the system; the device-object permission required is a narrow capability that is not intended to confer any kernel-memory access. The fix adds the two missing K_SYSCALL_MEMORY_WRITE() validations before the driver call.\n\nExposure is narrow in practice. Only builds with CONFIG_USERSPACE=y and CONFIG_TIMEAWARE_GPIO=y compile the affected file, and from v3.6.0 onward the file additionally referenced a relocated header (\u003czephyr/syscall_handler.h\u003e) and removed Z_SYSCALL_* macros, so such a configuration failed to build until those were repaired after v4.4.0. Downstream trees that locally corrected that breakage, and v3.5.0 builds where it did not exist, are the exposed population.","status":"published","published":"2026-09-21T18:35:30.081Z","modified":"2026-11-05T03:31:26.803852832Z","cvss":[{"version":"3.1","score":7.8,"vector":"CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H","level":"high"}],"cwes":["CWE-787"],"updated_at":"2026-11-05T07:12:28.867005Z"}]}}