{"id":"CVE-2026-19737","aliases":["EUVD-2026-97105","GHSA-5g9q-h8wq-rrf3"],"status":"published","title":"NULL pointer dereference in the ESP32 I2S driver when triggering an unsupported direction","description":"i2s_esp32_trigger_check() in drivers/i2s/i2s_esp32.c validates the requested direction only for I2S_DIR_BOTH. The I2S_DIR_RX and I2S_DIR_TX branches read dev_cfg-\u003erx.data-\u003econfigured / dev_cfg-\u003etx.data-\u003econfigured without first checking the stream pointers. The device instantiation macro I2S_ESP32_STREAM_INIT() sets both .conf and .data to NULL for a direction the devicetree does not describe, so on an instance that wires only one direction — the normal shape for audio output or a worldsemi,ws2812-i2s LED strip — the other direction dereferences a NULL pointer instead of returning an error.\n\ni2s_trigger() is a Zephyr syscall, and z_vrfy_i2s_trigger() in drivers/i2s/i2s_handlers.c validates only the device object and the presence of the trigger API pointer; the dir argument is passed to the driver unvalidated. On a build with CONFIG_USERSPACE enabled, a user-mode thread that has been granted the I2S device can issue a single i2s_trigger() call naming the unwired direction and cause a load from address 0 in kernel mode. Among the Espressif parts that carry this driver, userspace is available in-tree only on RISC-V SoCs with CONFIG_RISCV_PMP, and v4.4.0 is the first release where that is buildable: the ESP32-C6 HPCORE selects RISCV_PMP when it is not built for MCUboot. ESP32-C5 in v4.4.x carries the same PMP-region and userspace linker support but does not select RISCV_PMP by default. Espressif Xtensa targets do not support Zephyr userspace, and in a non-userspace build the bad direction can only come from in-kernel application code.\n\nThe impact is limited to availability: the access is a read at offset 0 of the missing stream structure, so there is no attacker-controlled offset, no write primitive and no information disclosure. With the default fatal-error handler the resulting exception halts the system, giving an unprivileged user-mode thread a system-wide denial of service. The fix adds the same pointer check the I2S_DIR_BOTH branch already performed and returns -ENOSYS for a direction the instance does not implement; the driver's other entry points (i2s_esp32_config_check(), i2s_esp32_config_get(), i2s_esp32_read(), i2s_esp32_write()) already guarded the pointers, and a static audit found no equivalent unguarded path.\n\nThe driver defect is older than the affected range. The unguarded dereference is present from v4.2.0 (reached through i2s_esp32_trigger_stream(), whose if (stream) guard tests the address of a struct member and is never false) and takes its present i2s_esp32_trigger_check() form in v4.3.0. No in-tree Espressif configuration before v4.4.0 can run a user-mode thread, so in v4.2.x and v4.3.x the direction argument can only come from trusted kernel code. Those releases carry the bug but are not listed as affected; the fix has also been merged to v4.3-branch as hardening.","severity":{"version":"3.1","score":5.5,"vector":"CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H","level":"medium","assessor":"cna","from":"cve"},"epss":{"day":"2026-11-11","score":0.001,"percentile":0.00839,"model":"v2026.06.15"},"facts":{"in_kev":false,"known_exploited":false,"public_exploit":false,"fix_available":false},"cwes":["CWE-476"],"published":"2026-10-11T17:15:01Z","modified":"2026-11-04T10:47:19Z","products":[{"vendor":"zephyrproject","product":"zephyr"},{"vendor":"zephyrproject-rtos","product":"zephyr"}],"references":[{"url":"https://github.com/zephyrproject-rtos/zephyr/commit/0d82dbbe72f154de32cc45021a9f59d9a737246b","tags":["patch","fix"]},{"url":"https://github.com/zephyrproject-rtos/zephyr/security/advisories/GHSA-5g9q-h8wq-rrf3","tags":["advisory"]},{"url":"https://github.com/CVEProject/cvelistV5/tree/main/cves/2026/19xxx/CVE-2026-19737.json","tags":["advisory"]},{"url":"https://nvd.nist.gov/vuln/detail/CVE-2026-19737","tags":["advisory"]},{"url":"https://github.com/zephyrproject-rtos/zephyr","tags":["package"]}],"sources":{"cve":[{"id":"CVE-2026-19737","title":"NULL pointer dereference in the ESP32 I2S driver when triggering an unsupported direction","description":"i2s_esp32_trigger_check() in drivers/i2s/i2s_esp32.c validates the requested direction only for I2S_DIR_BOTH. The I2S_DIR_RX and I2S_DIR_TX branches read dev_cfg-\u003erx.data-\u003econfigured / dev_cfg-\u003etx.data-\u003econfigured without first checking the stream pointers. The device instantiation macro I2S_ESP32_STREAM_INIT() sets both .conf and .data to NULL for a direction the devicetree does not describe, so on an instance that wires only one direction — the normal shape for audio output or a worldsemi,ws2812-i2s LED strip — the other direction dereferences a NULL pointer instead of returning an error.\n\ni2s_trigger() is a Zephyr syscall, and z_vrfy_i2s_trigger() in drivers/i2s/i2s_handlers.c validates only the device object and the presence of the trigger API pointer; the dir argument is passed to the driver unvalidated. On a build with CONFIG_USERSPACE enabled, a user-mode thread that has been granted the I2S device can issue a single i2s_trigger() call naming the unwired direction and cause a load from address 0 in kernel mode. Among the Espressif parts that carry this driver, userspace is available in-tree only on RISC-V SoCs with CONFIG_RISCV_PMP, and v4.4.0 is the first release where that is buildable: the ESP32-C6 HPCORE selects RISCV_PMP when it is not built for MCUboot. ESP32-C5 in v4.4.x carries the same PMP-region and userspace linker support but does not select RISCV_PMP by default. Espressif Xtensa targets do not support Zephyr userspace, and in a non-userspace build the bad direction can only come from in-kernel application code.\n\nThe impact is limited to availability: the access is a read at offset 0 of the missing stream structure, so there is no attacker-controlled offset, no write primitive and no information disclosure. With the default fatal-error handler the resulting exception halts the system, giving an unprivileged user-mode thread a system-wide denial of service. The fix adds the same pointer check the I2S_DIR_BOTH branch already performed and returns -ENOSYS for a direction the instance does not implement; the driver's other entry points (i2s_esp32_config_check(), i2s_esp32_config_get(), i2s_esp32_read(), i2s_esp32_write()) already guarded the pointers, and a static audit found no equivalent unguarded path.\n\nThe driver defect is older than the affected range. The unguarded dereference is present from v4.2.0 (reached through i2s_esp32_trigger_stream(), whose if (stream) guard tests the address of a struct member and is never false) and takes its present i2s_esp32_trigger_check() form in v4.3.0. No in-tree Espressif configuration before v4.4.0 can run a user-mode thread, so in v4.2.x and v4.3.x the direction argument can only come from trusted kernel code. Those releases carry the bug but are not listed as affected; the fix has also been merged to v4.3-branch as hardening.","status":"published","published":"2026-10-11T17:15:01.878Z","modified":"2026-10-16T15:46:16.4Z","cvss":[{"version":"3.1","score":5.5,"vector":"CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H","level":"medium","assessor":"cna"}],"cwes":["CWE-476"],"updated_at":"2026-11-02T13:47:17.512524Z"}],"euvd":[{"id":"EUVD-2026-97105","description":"i2s_esp32_trigger_check() in drivers/i2s/i2s_esp32.c validates the requested direction only for I2S_DIR_BOTH. The I2S_DIR_RX and I2S_DIR_TX branches read dev_cfg-\u003erx.data-\u003econfigured / dev_cfg-\u003etx.data-\u003econfigured without first checking the stream pointers. The device instantiation macro I2S_ESP32_STREAM_INIT() sets both .conf and .data to NULL for a direction the devicetree does not describe, so on an instance that wires only one direction — the normal shape for audio output or a worldsemi,ws2812-i2s LED strip — the other direction dereferences a NULL pointer instead of returning an error.\n\ni2s_trigger() is a Zephyr syscall, and z_vrfy_i2s_trigger() in drivers/i2s/i2s_handlers.c validates only the device object and the presence of the trigger API pointer; the dir argument is passed to the driver unvalidated. On a build with CONFIG_USERSPACE enabled, a user-mode thread that has been granted the I2S device can issue a single i2s_trigger() call naming the unwired direction and cause a load from address 0 in kernel mode. Among the Espressif parts that carry this driver, userspace is available in-tree only on RISC-V SoCs with CONFIG_RISCV_PMP, and v4.4.0 is the first release where that is buildable: the ESP32-C6 HPCORE selects RISCV_PMP when it is not built for MCUboot. ESP32-C5 in v4.4.x carries the same PMP-region and userspace linker support but does not select RISCV_PMP by default. Espressif Xtensa targets do not support Zephyr userspace, and in a non-userspace build the bad direction can only come from in-kernel application code.\n\nThe impact is limited to availability: the access is a read at offset 0 of the missing stream structure, so there is no attacker-controlled offset, no write primitive and no information disclosure. With the default fatal-error handler the resulting exception halts the system, giving an unprivileged user-mode thread a system-wide denial of service. The fix adds the same pointer check the I2S_DIR_BOTH branch already performed and returns -ENOSYS for a direction the instance does not implement; the driver's other entry points (i2s_esp32_config_check(), i2s_esp32_config_get(), i2s_esp32_read(), i2s_esp32_write()) already guarded the pointers, and a static audit found no equivalent unguarded path.\n\nThe driver defect is older than the affected range. The unguarded dereference is present from v4.2.0 (reached through i2s_esp32_trigger_stream(), whose if (stream) guard tests the address of a struct member and is never false) and takes its present i2s_esp32_trigger_check() form in v4.3.0. No in-tree Espressif configuration before v4.4.0 can run a user-mode thread, so in v4.2.x and v4.3.x the direction argument can only come from trusted kernel code. Those releases carry the bug but are not listed as affected; the fix has also been merged to v4.3-branch as hardening.","status":"published","published":"2026-10-11T17:15:01Z","modified":"2026-10-16T15:46:16Z","cvss":[{"version":"3.1","score":5.5,"vector":"CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H","level":"medium"}],"updated_at":"2026-11-02T17:00:05.229655Z"}],"nvd":[{"id":"CVE-2026-19737","description":"i2s_esp32_trigger_check() in drivers/i2s/i2s_esp32.c validates the requested direction only for I2S_DIR_BOTH. The I2S_DIR_RX and I2S_DIR_TX branches read dev_cfg-\u003erx.data-\u003econfigured / dev_cfg-\u003etx.data-\u003econfigured without first checking the stream pointers. The device instantiation macro I2S_ESP32_STREAM_INIT() sets both .conf and .data to NULL for a direction the devicetree does not describe, so on an instance that wires only one direction — the normal shape for audio output or a worldsemi,ws2812-i2s LED strip — the other direction dereferences a NULL pointer instead of returning an error.\n\ni2s_trigger() is a Zephyr syscall, and z_vrfy_i2s_trigger() in drivers/i2s/i2s_handlers.c validates only the device object and the presence of the trigger API pointer; the dir argument is passed to the driver unvalidated. On a build with CONFIG_USERSPACE enabled, a user-mode thread that has been granted the I2S device can issue a single i2s_trigger() call naming the unwired direction and cause a load from address 0 in kernel mode. Among the Espressif parts that carry this driver, userspace is available in-tree only on RISC-V SoCs with CONFIG_RISCV_PMP, and v4.4.0 is the first release where that is buildable: the ESP32-C6 HPCORE selects RISCV_PMP when it is not built for MCUboot. ESP32-C5 in v4.4.x carries the same PMP-region and userspace linker support but does not select RISCV_PMP by default. Espressif Xtensa targets do not support Zephyr userspace, and in a non-userspace build the bad direction can only come from in-kernel application code.\n\nThe impact is limited to availability: the access is a read at offset 0 of the missing stream structure, so there is no attacker-controlled offset, no write primitive and no information disclosure. With the default fatal-error handler the resulting exception halts the system, giving an unprivileged user-mode thread a system-wide denial of service. The fix adds the same pointer check the I2S_DIR_BOTH branch already performed and returns -ENOSYS for a direction the instance does not implement; the driver's other entry points (i2s_esp32_config_check(), i2s_esp32_config_get(), i2s_esp32_read(), i2s_esp32_write()) already guarded the pointers, and a static audit found no equivalent unguarded path.\n\nThe driver defect is older than the affected range. The unguarded dereference is present from v4.2.0 (reached through i2s_esp32_trigger_stream(), whose if (stream) guard tests the address of a struct member and is never false) and takes its present i2s_esp32_trigger_check() form in v4.3.0. No in-tree Espressif configuration before v4.4.0 can run a user-mode thread, so in v4.2.x and v4.3.x the direction argument can only come from trusted kernel code. Those releases carry the bug but are not listed as affected; the fix has also been merged to v4.3-branch as hardening.","status":"published","published":"2026-10-11T18:16:58.93Z","modified":"2026-10-16T16:17:05.303Z","cvss":[{"version":"3.1","score":5.5,"vector":"CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H","level":"medium","assessor":"secondary"}],"cwes":["CWE-476"],"updated_at":"2026-11-02T14:12:56.310333Z"}],"osv":[{"id":"CVE-2026-19737","title":"NULL pointer dereference in the ESP32 I2S driver when triggering an unsupported direction","description":"i2s_esp32_trigger_check() in drivers/i2s/i2s_esp32.c validates the requested direction only for I2S_DIR_BOTH. The I2S_DIR_RX and I2S_DIR_TX branches read dev_cfg-\u003erx.data-\u003econfigured / dev_cfg-\u003etx.data-\u003econfigured without first checking the stream pointers. The device instantiation macro I2S_ESP32_STREAM_INIT() sets both .conf and .data to NULL for a direction the devicetree does not describe, so on an instance that wires only one direction — the normal shape for audio output or a worldsemi,ws2812-i2s LED strip — the other direction dereferences a NULL pointer instead of returning an error.\n\ni2s_trigger() is a Zephyr syscall, and z_vrfy_i2s_trigger() in drivers/i2s/i2s_handlers.c validates only the device object and the presence of the trigger API pointer; the dir argument is passed to the driver unvalidated. On a build with CONFIG_USERSPACE enabled, a user-mode thread that has been granted the I2S device can issue a single i2s_trigger() call naming the unwired direction and cause a load from address 0 in kernel mode. Among the Espressif parts that carry this driver, userspace is available in-tree only on RISC-V SoCs with CONFIG_RISCV_PMP, and v4.4.0 is the first release where that is buildable: the ESP32-C6 HPCORE selects RISCV_PMP when it is not built for MCUboot. ESP32-C5 in v4.4.x carries the same PMP-region and userspace linker support but does not select RISCV_PMP by default. Espressif Xtensa targets do not support Zephyr userspace, and in a non-userspace build the bad direction can only come from in-kernel application code.\n\nThe impact is limited to availability: the access is a read at offset 0 of the missing stream structure, so there is no attacker-controlled offset, no write primitive and no information disclosure. With the default fatal-error handler the resulting exception halts the system, giving an unprivileged user-mode thread a system-wide denial of service. The fix adds the same pointer check the I2S_DIR_BOTH branch already performed and returns -ENOSYS for a direction the instance does not implement; the driver's other entry points (i2s_esp32_config_check(), i2s_esp32_config_get(), i2s_esp32_read(), i2s_esp32_write()) already guarded the pointers, and a static audit found no equivalent unguarded path.\n\nThe driver defect is older than the affected range. The unguarded dereference is present from v4.2.0 (reached through i2s_esp32_trigger_stream(), whose if (stream) guard tests the address of a struct member and is never false) and takes its present i2s_esp32_trigger_check() form in v4.3.0. No in-tree Espressif configuration before v4.4.0 can run a user-mode thread, so in v4.2.x and v4.3.x the direction argument can only come from trusted kernel code. Those releases carry the bug but are not listed as affected; the fix has also been merged to v4.3-branch as hardening.","status":"published","published":"2026-10-11T17:15:01.878Z","modified":"2026-11-11T13:20:22.961117574Z","cvss":[{"version":"3.1","score":5.5,"vector":"CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H","level":"medium"}],"cwes":["CWE-476"],"updated_at":"2026-11-11T03:22:00.901153Z"}]}}