{"id":"CVE-2026-90834","aliases":["EUVD-2026-123039"],"status":"published","title":"UART wide-data syscall verifiers check the 8-bit driver op, allowing a user-mode thread to trigger a NULL function-pointer call in kernel mode","description":"The user-mode syscall verifiers for the 16-bit (\"wide data\") UART API in drivers/serial/uart_handlers.c validated the wrong driver operation. z_vrfy_uart_poll_out_u16(), z_vrfy_uart_tx_u16() and z_vrfy_uart_rx_enable_u16() each ran K_SYSCALL_DRIVER_UART() against the 8-bit op (poll_out, tx, rx_enable) rather than the 16-bit op that the corresponding implementation dereferences (poll_out_u16, tx_u16, rx_enable_u16). z_impl_uart_poll_out_u16(), z_impl_uart_tx_u16() and z_impl_uart_rx_enable_u16() in include/zephyr/drivers/uart/uart_internal.h call their op unconditionally, with no NULL guard of their own, because the verifier is supposed to have established that the op exists.\n\nCONFIG_UART_WIDE_DATA is an application-selectable option that no driver selects, and only a handful of the serial drivers in the tree implement any _u16 operation; every other driver leaves those struct uart_driver_api members NULL while still providing the 8-bit ops the old check inspected. In a build with CONFIG_USERSPACE and CONFIG_UART_WIDE_DATA (plus CONFIG_UART_ASYNC_API for the uart_tx_u16() and uart_rx_enable_u16() variants), an unprivileged user-mode thread that legitimately holds access to such a UART device object can invoke the _u16 syscall: the object, permission and op checks all pass, and the kernel-side implementation then performs an indirect call through a NULL function pointer while running at supervisor privilege.\n\nThe result is a CPU exception taken in kernel context instead of the intended K_OOPS or -ENOSYS return. With the default k_sys_fatal_error_handler() this halts the system (or warm-reboots it under CONFIG_RESET_ON_FATAL_ERROR), so a thread confined by the userspace sandbox can deny service to the whole device — a capability the user-mode privilege boundary is specifically meant to withhold. The call target is a fixed NULL, so there is no attacker-controlled code execution and no memory disclosure; the separate K_SYSCALL_MEMORY_ARRAY_READ()/K_SYSCALL_MEMORY_ARRAY_WRITE() bounds checks on the caller's buffer were and remain correct. The fix points each verifier at the matching _u16 op, using a plain K_SYSCALL_OBJ() object check where the op does not exist or where the implementation already tests it for NULL.","severity":{"version":"3.1","score":5.5,"vector":"CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H","level":"medium","assessor":"cna","from":"cve"},"facts":{"in_kev":false,"known_exploited":false,"public_exploit":false,"fix_available":false},"cwes":["CWE-476"],"published":"2026-11-10T22:07:45Z","modified":"2026-11-10T22:07:45Z","products":[{"vendor":"zephyrproject","product":"zephyr"},{"vendor":"zephyrproject-rtos","product":"zephyr"}],"references":[{"url":"https://github.com/zephyrproject-rtos/zephyr/commit/3c13bfd3d3ccdceeb51b884fed5a8d2a49475484","tags":["patch"]},{"url":"https://github.com/zephyrproject-rtos/zephyr/security/advisories/GHSA-xvwx-ww79-r346"}],"sources":{"cve":[{"id":"CVE-2026-90834","title":"UART wide-data syscall verifiers check the 8-bit driver op, allowing a user-mode thread to trigger a NULL function-pointer call in kernel mode","description":"The user-mode syscall verifiers for the 16-bit (\"wide data\") UART API in drivers/serial/uart_handlers.c validated the wrong driver operation. z_vrfy_uart_poll_out_u16(), z_vrfy_uart_tx_u16() and z_vrfy_uart_rx_enable_u16() each ran K_SYSCALL_DRIVER_UART() against the 8-bit op (poll_out, tx, rx_enable) rather than the 16-bit op that the corresponding implementation dereferences (poll_out_u16, tx_u16, rx_enable_u16). z_impl_uart_poll_out_u16(), z_impl_uart_tx_u16() and z_impl_uart_rx_enable_u16() in include/zephyr/drivers/uart/uart_internal.h call their op unconditionally, with no NULL guard of their own, because the verifier is supposed to have established that the op exists.\n\nCONFIG_UART_WIDE_DATA is an application-selectable option that no driver selects, and only a handful of the serial drivers in the tree implement any _u16 operation; every other driver leaves those struct uart_driver_api members NULL while still providing the 8-bit ops the old check inspected. In a build with CONFIG_USERSPACE and CONFIG_UART_WIDE_DATA (plus CONFIG_UART_ASYNC_API for the uart_tx_u16() and uart_rx_enable_u16() variants), an unprivileged user-mode thread that legitimately holds access to such a UART device object can invoke the _u16 syscall: the object, permission and op checks all pass, and the kernel-side implementation then performs an indirect call through a NULL function pointer while running at supervisor privilege.\n\nThe result is a CPU exception taken in kernel context instead of the intended K_OOPS or -ENOSYS return. With the default k_sys_fatal_error_handler() this halts the system (or warm-reboots it under CONFIG_RESET_ON_FATAL_ERROR), so a thread confined by the userspace sandbox can deny service to the whole device — a capability the user-mode privilege boundary is specifically meant to withhold. The call target is a fixed NULL, so there is no attacker-controlled code execution and no memory disclosure; the separate K_SYSCALL_MEMORY_ARRAY_READ()/K_SYSCALL_MEMORY_ARRAY_WRITE() bounds checks on the caller's buffer were and remain correct. The fix points each verifier at the matching _u16 op, using a plain K_SYSCALL_OBJ() object check where the op does not exist or where the implementation already tests it for NULL.","status":"published","published":"2026-11-10T22:07:45.167Z","modified":"2026-11-10T22:07:45.167Z","cvss":[{"version":"3.1","score":5.5,"vector":"CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H","level":"medium","assessor":"cna"}],"cwes":["CWE-476"],"updated_at":"2026-11-10T23:49:31.970756Z"}],"euvd":[{"id":"EUVD-2026-123039","description":"The user-mode syscall verifiers for the 16-bit (\"wide data\") UART API in drivers/serial/uart_handlers.c validated the wrong driver operation. z_vrfy_uart_poll_out_u16(), z_vrfy_uart_tx_u16() and z_vrfy_uart_rx_enable_u16() each ran K_SYSCALL_DRIVER_UART() against the 8-bit op (poll_out, tx, rx_enable) rather than the 16-bit op that the corresponding implementation dereferences (poll_out_u16, tx_u16, rx_enable_u16). z_impl_uart_poll_out_u16(), z_impl_uart_tx_u16() and z_impl_uart_rx_enable_u16() in include/zephyr/drivers/uart/uart_internal.h call their op unconditionally, with no NULL guard of their own, because the verifier is supposed to have established that the op exists.\n\nCONFIG_UART_WIDE_DATA is an application-selectable option that no driver selects, and only a handful of the serial drivers in the tree implement any _u16 operation; every other driver leaves those struct uart_driver_api members NULL while still providing the 8-bit ops the old check inspected. In a build with CONFIG_USERSPACE and CONFIG_UART_WIDE_DATA (plus CONFIG_UART_ASYNC_API for the uart_tx_u16() and uart_rx_enable_u16() variants), an unprivileged user-mode thread that legitimately holds access to such a UART device object can invoke the _u16 syscall: the object, permission and op checks all pass, and the kernel-side implementation then performs an indirect call through a NULL function pointer while running at supervisor privilege.\n\nThe result is a CPU exception taken in kernel context instead of the intended K_OOPS or -ENOSYS return. With the default k_sys_fatal_error_handler() this halts the system (or warm-reboots it under CONFIG_RESET_ON_FATAL_ERROR), so a thread confined by the userspace sandbox can deny service to the whole device — a capability the user-mode privilege boundary is specifically meant to withhold. The call target is a fixed NULL, so there is no attacker-controlled code execution and no memory disclosure; the separate K_SYSCALL_MEMORY_ARRAY_READ()/K_SYSCALL_MEMORY_ARRAY_WRITE() bounds checks on the caller's buffer were and remain correct. The fix points each verifier at the matching _u16 op, using a plain K_SYSCALL_OBJ() object check where the op does not exist or where the implementation already tests it for NULL.","status":"published","published":"2026-11-10T22:07:45Z","modified":"2026-11-10T22:07:45Z","cvss":[{"version":"3.1","score":5.5,"vector":"CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H","level":"medium"}],"updated_at":"2026-11-10T23:24:16.163953Z"}],"nvd":[{"id":"CVE-2026-90834","description":"The user-mode syscall verifiers for the 16-bit (\"wide data\") UART API in drivers/serial/uart_handlers.c validated the wrong driver operation. z_vrfy_uart_poll_out_u16(), z_vrfy_uart_tx_u16() and z_vrfy_uart_rx_enable_u16() each ran K_SYSCALL_DRIVER_UART() against the 8-bit op (poll_out, tx, rx_enable) rather than the 16-bit op that the corresponding implementation dereferences (poll_out_u16, tx_u16, rx_enable_u16). z_impl_uart_poll_out_u16(), z_impl_uart_tx_u16() and z_impl_uart_rx_enable_u16() in include/zephyr/drivers/uart/uart_internal.h call their op unconditionally, with no NULL guard of their own, because the verifier is supposed to have established that the op exists.\n\nCONFIG_UART_WIDE_DATA is an application-selectable option that no driver selects, and only a handful of the serial drivers in the tree implement any _u16 operation; every other driver leaves those struct uart_driver_api members NULL while still providing the 8-bit ops the old check inspected. In a build with CONFIG_USERSPACE and CONFIG_UART_WIDE_DATA (plus CONFIG_UART_ASYNC_API for the uart_tx_u16() and uart_rx_enable_u16() variants), an unprivileged user-mode thread that legitimately holds access to such a UART device object can invoke the _u16 syscall: the object, permission and op checks all pass, and the kernel-side implementation then performs an indirect call through a NULL function pointer while running at supervisor privilege.\n\nThe result is a CPU exception taken in kernel context instead of the intended K_OOPS or -ENOSYS return. With the default k_sys_fatal_error_handler() this halts the system (or warm-reboots it under CONFIG_RESET_ON_FATAL_ERROR), so a thread confined by the userspace sandbox can deny service to the whole device — a capability the user-mode privilege boundary is specifically meant to withhold. The call target is a fixed NULL, so there is no attacker-controlled code execution and no memory disclosure; the separate K_SYSCALL_MEMORY_ARRAY_READ()/K_SYSCALL_MEMORY_ARRAY_WRITE() bounds checks on the caller's buffer were and remain correct. The fix points each verifier at the matching _u16 op, using a plain K_SYSCALL_OBJ() object check where the op does not exist or where the implementation already tests it for NULL.","status":"published","published":"2026-11-10T22:21:14.46Z","modified":"2026-11-10T22:21:14.57Z","cvss":[{"version":"3.1","score":5.5,"vector":"CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H","level":"medium","assessor":"secondary"}],"cwes":["CWE-476"],"updated_at":"2026-11-11T00:21:54.825455Z"}]}}