CVE-2015-7976

The ntpq saveconfig command in NTP 4.1.2, 4.2.x before 4.2.8p6, 4.3, 4.3.25, 4.3.70, and 4.3.77 does not properly filter special characters, which allows attackers to cause unspecified impact via a crafted filename.

These are all security issues fixed in the ntp-4.2.8p9-1.1 package on the GA media of openSUSE Tumbleweed.

ntp was updated to version 4.2.8p6 to fix 12 security issues.

These security issues were fixed:

• CVE-2015-8158: Fixed potential infinite loop in ntpq (bsc#962966).
• CVE-2015-8138: Zero Origin Timestamp Bypass (bsc#963002).
• CVE-2015-7979: Off-path Denial of Service (DoS) attack on authenticated broadcast mode (bsc#962784).
• CVE-2015-7978: Stack exhaustion in recursive traversal of restriction list (bsc#963000).
• CVE-2015-7977: reslist NULL pointer dereference (bsc#962970).
• CVE-2015-7976: ntpq saveconfig command allows dangerous characters in filenames (bsc#962802).
• CVE-2015-7975: nextvar() missing length check (bsc#962988).
• CVE-2015-7974: Skeleton Key: Missing key check allows impersonation between authenticated peers (bsc#962960).
• CVE-2015-7973: Replay attack on authenticated broadcast mode (bsc#962995).
• CVE-2015-8140: ntpq vulnerable to replay attacks (bsc#962994).
• CVE-2015-8139: Origin Leak: ntpq and ntpdc, disclose origin (bsc#962997).
• CVE-2015-5300: MITM attacker could have forced ntpd to make a step larger than the panic threshold (bsc#951629).

These non-security issues were fixed:

• fate#320758 bsc#975981: Enable compile-time support for MS-SNTP (--enable-ntp-signd). This replaces the w32 patches in 4.2.4 that added the authreg directive.
• bsc#962318: Call /usr/sbin/sntp with full path to synchronize in start-ntpd. When run as cron job, /usr/sbin/ is not in the path, which caused the synchronization to fail.
• bsc#782060: Speedup ntpq.
• bsc#916617: Add /var/db/ntp-kod.
• bsc#956773: Add ntp-ENOBUFS.patch to limit a warning that might happen quite a lot on loaded systems.
• bsc#951559,bsc#975496: Fix the TZ offset output of sntp during DST.
• Add ntp-fork.patch and build with threads disabled to allow name resolution even when running chrooted.
• bsc#784760: Remove local clock from default configuration

ntp was updated to version 4.2.8p6 to fix 12 security issues.

Also yast2-ntp-client was updated to match some sntp syntax changes. (bsc#937837)

These security issues were fixed:

• CVE-2015-8158: Fixed potential infinite loop in ntpq (bsc#962966).
• CVE-2015-8138: Zero Origin Timestamp Bypass (bsc#963002).
• CVE-2015-7979: Off-path Denial of Service (DoS) attack on authenticated broadcast mode (bsc#962784).
• CVE-2015-7978: Stack exhaustion in recursive traversal of restriction list (bsc#963000).
• CVE-2015-7977: reslist NULL pointer dereference (bsc#962970).
• CVE-2015-7976: ntpq saveconfig command allows dangerous characters in filenames (bsc#962802).
• CVE-2015-7975: nextvar() missing length check (bsc#962988).
• CVE-2015-7974: Skeleton Key: Missing key check allows impersonation between authenticated peers (bsc#962960).
• CVE-2015-7973: Replay attack on authenticated broadcast mode (bsc#962995).
• CVE-2015-8140: ntpq vulnerable to replay attacks (bsc#962994).
• CVE-2015-8139: Origin Leak: ntpq and ntpdc, disclose origin (bsc#962997).
• CVE-2015-5300: MITM attacker could have forced ntpd to make a step larger than the panic threshold (bsc#951629).

These non-security issues were fixed:

• fate#320758 bsc#975981: Enable compile-time support for MS-SNTP (--enable-ntp-signd). This replaces the w32 patches in 4.2.4 that added the authreg directive.
• bsc#962318: Call /usr/sbin/sntp with full path to synchronize in start-ntpd. When run as cron job, /usr/sbin/ is not in the path, which caused the synchronization to fail.
• bsc#782060: Speedup ntpq.
• bsc#916617: Add /var/db/ntp-kod.
• bsc#956773: Add ntp-ENOBUFS.patch to limit a warning that might happen quite a lot on loaded systems.
• bsc#951559,bsc#975496: Fix the TZ offset output of sntp during DST.
• Add ntp-fork.patch and build with threads disabled to allow name resolution even when running chrooted.

ntp was updated to version 4.2.8p6 to fix 28 security issues.

Major functional changes:

• The 'sntp' commandline tool changed its option handling in a major way, some options have been renamed or dropped.
• 'controlkey 1' is added during update to ntp.conf to allow sntp to work.
• The local clock is being disabled during update.
• ntpd is no longer running chrooted.

Other functional changes:

• ntp-signd is installed.
• 'enable mode7' can be added to the configuration to allow ntdpc to work as compatibility mode option.
• 'kod' was removed from the default restrictions.
• SHA1 keys are used by default instead of MD5 keys.

Also yast2-ntp-client was updated to match some sntp syntax changes. (bsc#937837)

These security issues were fixed:

• CVE-2015-8158: Fixed potential infinite loop in ntpq (bsc#962966).
• CVE-2015-8138: Zero Origin Timestamp Bypass (bsc#963002).
• CVE-2015-7979: Off-path Denial of Service (DoS) attack on authenticated broadcast mode (bsc#962784).
• CVE-2015-7978: Stack exhaustion in recursive traversal of restriction list (bsc#963000).
• CVE-2015-7977: reslist NULL pointer dereference (bsc#962970).
• CVE-2015-7976: ntpq saveconfig command allows dangerous characters in filenames (bsc#962802).
• CVE-2015-7975: nextvar() missing length check (bsc#962988).
• CVE-2015-7974: Skeleton Key: Missing key check allows impersonation between authenticated peers (bsc#962960).
• CVE-2015-7973: Replay attack on authenticated broadcast mode (bsc#962995).
• CVE-2015-8140: ntpq vulnerable to replay attacks (bsc#962994).
• CVE-2015-8139: Origin Leak: ntpq and ntpdc, disclose origin (bsc#962997).
• CVE-2015-5300: MITM attacker could have forced ntpd to make a step larger than the panic threshold (bsc#951629).
• CVE-2015-7871: NAK to the Future: Symmetric association authentication bypass via crypto-NAK (bsc#951608).
• CVE-2015-7855: decodenetnum() will ASSERT botch instead of returning FAIL on some bogus values (bsc#951608).
• CVE-2015-7854: Password Length Memory Corruption Vulnerability (bsc#951608).
• CVE-2015-7853: Invalid length data provided by a custom refclock driver could cause a buffer overflow (bsc#951608).
• CVE-2015-7852: ntpq atoascii() Memory Corruption Vulnerability (bsc#951608).
• CVE-2015-7851: saveconfig Directory Traversal Vulnerability (bsc#951608).
• CVE-2015-7850: remote config logfile-keyfile (bsc#951608).
• CVE-2015-7849: trusted key use-after-free (bsc#951608).
• CVE-2015-7848: mode 7 loop counter underrun (bsc#951608).
• CVE-2015-7701: Slow memory leak in CRYPTO_ASSOC (bsc#951608).
• CVE-2015-7703: configuration directives 'pidfile' and 'driftfile' should only be allowed locally (bsc#951608).
• CVE-2015-7704, CVE-2015-7705: Clients that receive a KoD should validate the origin timestamp field (bsc#951608).
• CVE-2015-7691, CVE-2015-7692, CVE-2015-7702: Incomplete autokey data packet length checks (bsc#951608).

These non-security issues were fixed:

• fate#320758 bsc#975981: Enable compile-time support for MS-SNTP (--enable-ntp-signd). This replaces the w32 patches in 4.2.4 that added the authreg directive.
• bsc#962318: Call /usr/sbin/sntp with full path to synchronize in start-ntpd. When run as cron job, /usr/sbin/ is not in the path, which caused the synchronization to fail.
• bsc#782060: Speedup ntpq.
• bsc#916617: Add /var/db/ntp-kod.
• bsc#956773: Add ntp-ENOBUFS.patch to limit a warning that might happen quite a lot on loaded systems.
• bsc#951559,bsc#975496: Fix the TZ offset output of sntp during DST.
• Add ntp-fork.patch and build with threads disabled to allow name resolution even when running chrooted.
• Add a controlkey line to /etc/ntp.conf if one does not already exist to allow runtime configuuration via ntpq.
• bsc#946386: Temporarily disable memlock to avoid problems due to high memory usage during name resolution.
• bsc#905885: Use SHA1 instead of MD5 for symmetric keys.
• Improve runtime configuration:
  • Read keytype from ntp.conf
  • Don't write ntp keys to syslog. -…

This network time protocol server ntp was updated to 4.2.8p6 to fix the following issues:

Also yast2-ntp-client was updated to match some sntp syntax changes. (bsc#937837)

Major functional changes:

• The 'sntp' commandline tool changed its option handling in a major way.
• 'controlkey 1' is added during update to ntp.conf to allow sntp to work.
• The local clock is being disabled during update.
• ntpd is no longer running chrooted.

Other functional changes:

• ntp-signd is installed.
• 'enable mode7' can be added to the configuration to allow ntdpc to work as compatibility mode option.
• 'kod' was removed from the default restrictions.
• SHA1 keys are used by default instead of MD5 keys.

These security issues were fixed:

• CVE-2015-5219: An endless loop due to incorrect precision to double conversion (bsc#943216).
• CVE-2015-8158: Fixed potential infinite loop in ntpq (bsc#962966).
• CVE-2015-8138: Zero Origin Timestamp Bypass (bsc#963002).
• CVE-2015-7979: Off-path Denial of Service (DoS) attack on authenticated broadcast mode (bsc#962784).
• CVE-2015-7978: Stack exhaustion in recursive traversal of restriction list (bsc#963000).
• CVE-2015-7977: reslist NULL pointer dereference (bsc#962970).
• CVE-2015-7976: ntpq saveconfig command allows dangerous characters in filenames (bsc#962802).
• CVE-2015-7975: nextvar() missing length check (bsc#962988).
• CVE-2015-7974: Skeleton Key: Missing key check allows impersonation between authenticated peers (bsc#962960).
• CVE-2015-7973: Replay attack on authenticated broadcast mode (bsc#962995).
• CVE-2015-8140: ntpq vulnerable to replay attacks (bsc#962994).
• CVE-2015-8139: Origin Leak: ntpq and ntpdc, disclose origin (bsc#962997).
• CVE-2015-5300: MITM attacker could have forced ntpd to make a step larger than the panic threshold (bsc#951629).
• CVE-2015-7871: NAK to the Future: Symmetric association authentication bypass via crypto-NAK (bsc#951608).
• CVE-2015-7855: decodenetnum() will ASSERT botch instead of returning FAIL on some bogus values (bsc#951608).
• CVE-2015-7854: Password Length Memory Corruption Vulnerability (bsc#951608).
• CVE-2015-7853: Invalid length data provided by a custom refclock driver could cause a buffer overflow (bsc#951608).
• CVE-2015-7852: ntpq atoascii() Memory Corruption Vulnerability (bsc#951608).
• CVE-2015-7851: saveconfig Directory Traversal Vulnerability (bsc#951608).
• CVE-2015-7850: remote config logfile-keyfile (bsc#951608).
• CVE-2015-7849: trusted key use-after-free (bsc#951608).
• CVE-2015-7848: mode 7 loop counter underrun (bsc#951608).
• CVE-2015-7701: Slow memory leak in CRYPTO_ASSOC (bsc#951608).
• CVE-2015-7703: configuration directives 'pidfile' and 'driftfile' should only be allowed locally (bsc#951608).
• CVE-2015-7704, CVE-2015-7705: Clients that receive a KoD should validate the origin timestamp field (bsc#951608).
• CVE-2015-7691, CVE-2015-7692, CVE-2015-7702: Incomplete autokey data packet length checks (bsc#951608).

These non-security issues were fixed:

• fate#320758 bsc#975981: Enable compile-time support for MS-SNTP (--enable-ntp-signd). This replaces the w32 patches in 4.2.4 that added the authreg directive.
• bsc#962318: Call /usr/sbin/sntp with full path to synchronize in start-ntpd. When run as cron job, /usr/sbin/ is not in the path, which caused the synchronization to fail.
• bsc#782060: Speedup ntpq.
• bsc#916617: Add /var/db/ntp-kod.
• bsc#956773: Add ntp-ENOBUFS.patch to limit a warning that might happen quite a lot on loaded systems.
• bsc#951559,bsc#975496: Fix the TZ offset output of sntp during DST.
• Add ntp-fork.patch and build with threads disabled to allow name resolution even when running chrooted.
• Add a controlkey line to /etc/ntp.conf if one does not already exist to allow runtime configuuration via ntpq.
• bsc#946386: Temporarily disable memlock to avoid problems due to high memory usage during name resolution.
• bsc#905885: Use SHA1 instead of MD5 for symmetric keys.
• Improve runtime…

Aanchal Malhotra discovered that NTP incorrectly handled authenticated broadcast mode. A remote attacker could use this issue to perform a replay attack. (CVE-2015-7973)

Matt Street discovered that NTP incorrectly verified peer associations of symmetric keys. A remote attacker could use this issue to perform an impersonation attack. (CVE-2015-7974)

Jonathan Gardner discovered that the NTP ntpq utility incorrectly handled memory. An attacker could possibly use this issue to cause ntpq to crash, resulting in a denial of service. This issue only affected Ubuntu 16.04 LTS. (CVE-2015-7975)

Jonathan Gardner discovered that the NTP ntpq utility incorrectly handled dangerous characters in filenames. An attacker could possibly use this issue to overwrite arbitrary files. (CVE-2015-7976)

Stephen Gray discovered that NTP incorrectly handled large restrict lists. An attacker could use this issue to cause NTP to crash, resulting in a denial of service. (CVE-2015-7977, CVE-2015-7978)

Aanchal Malhotra discovered that NTP incorrectly handled authenticated broadcast mode. A remote attacker could use this issue to cause NTP to crash, resulting in a denial of service. (CVE-2015-7979)

Jonathan Gardner discovered that NTP incorrectly handled origin timestamp checks. A remote attacker could use this issue to spoof peer servers. (CVE-2015-8138)

Jonathan Gardner discovered that the NTP ntpq utility did not properly handle certain incorrect values. An attacker could possibly use this issue to cause ntpq to hang, resulting in a denial of service. (CVE-2015-8158)

It was discovered that the NTP cronjob incorrectly cleaned up the statistics directory. A local attacker could possibly use this to escalate privileges. (CVE-2016-0727)

Stephen Gray and Matthew Van Gundy discovered that NTP incorrectly validated crypto-NAKs. A remote attacker could possibly use this issue to prevent clients from synchronizing. (CVE-2016-1547)

Miroslav Lichvar and Jonathan Gardner discovered that NTP incorrectly handled switching to interleaved symmetric mode. A remote attacker could possibly use this issue to prevent clients from synchronizing. (CVE-2016-1548)

Matthew Van Gundy, Stephen Gray and Loganaden Velvindron discovered that NTP incorrectly handled message authentication. A remote attacker could possibly use this issue to recover the message digest key. (CVE-2016-1550)

Yihan Lian discovered that NTP incorrectly handled duplicate IPs on unconfig directives. An authenticated remote attacker could possibly use this issue to cause NTP to crash, resulting in a denial of service. (CVE-2016-2516)

Yihan Lian discovered that NTP incorrectly handled certail peer associations. A remote attacker could possibly use this issue to cause NTP to crash, resulting in a denial of service. (CVE-2016-2518)

Jakub Prokes discovered that NTP incorrectly handled certain spoofed packets. A remote attacker could possibly use this issue to cause a denial of service. (CVE-2016-4954)

Miroslav Lichvar discovered that NTP incorrectly handled certain packets when autokey is enabled. A remote attacker could possibly use this issue to cause a denial of service. (CVE-2016-4955)

Miroslav Lichvar discovered that NTP incorrectly handled certain spoofed broadcast packets. A remote attacker could possibly use this issue to cause a denial of service. (CVE-2016-4956)

In the default installation, attackers would be isolated by the NTP AppArmor profile.