CVE-2015-8140

The ntpq protocol in NTP before 4.2.8p7 allows remote attackers to conduct replay attacks by sniffing the network.

ntp was updated to version 4.2.8p6 to fix 12 security issues.

These security issues were fixed:

• CVE-2015-8158: Fixed potential infinite loop in ntpq (bsc#962966).
• CVE-2015-8138: Zero Origin Timestamp Bypass (bsc#963002).
• CVE-2015-7979: Off-path Denial of Service (DoS) attack on authenticated broadcast mode (bsc#962784).
• CVE-2015-7978: Stack exhaustion in recursive traversal of restriction list (bsc#963000).
• CVE-2015-7977: reslist NULL pointer dereference (bsc#962970).
• CVE-2015-7976: ntpq saveconfig command allows dangerous characters in filenames (bsc#962802).
• CVE-2015-7975: nextvar() missing length check (bsc#962988).
• CVE-2015-7974: Skeleton Key: Missing key check allows impersonation between authenticated peers (bsc#962960).
• CVE-2015-7973: Replay attack on authenticated broadcast mode (bsc#962995).
• CVE-2015-8140: ntpq vulnerable to replay attacks (bsc#962994).
• CVE-2015-8139: Origin Leak: ntpq and ntpdc, disclose origin (bsc#962997).
• CVE-2015-5300: MITM attacker could have forced ntpd to make a step larger than the panic threshold (bsc#951629).

These non-security issues were fixed:

• fate#320758 bsc#975981: Enable compile-time support for MS-SNTP (--enable-ntp-signd). This replaces the w32 patches in 4.2.4 that added the authreg directive.
• bsc#962318: Call /usr/sbin/sntp with full path to synchronize in start-ntpd. When run as cron job, /usr/sbin/ is not in the path, which caused the synchronization to fail.
• bsc#782060: Speedup ntpq.
• bsc#916617: Add /var/db/ntp-kod.
• bsc#956773: Add ntp-ENOBUFS.patch to limit a warning that might happen quite a lot on loaded systems.
• bsc#951559,bsc#975496: Fix the TZ offset output of sntp during DST.
• Add ntp-fork.patch and build with threads disabled to allow name resolution even when running chrooted.
• bsc#784760: Remove local clock from default configuration

ntp was updated to version 4.2.8p6 to fix 12 security issues.

Also yast2-ntp-client was updated to match some sntp syntax changes. (bsc#937837)

These security issues were fixed:

• CVE-2015-8158: Fixed potential infinite loop in ntpq (bsc#962966).
• CVE-2015-8138: Zero Origin Timestamp Bypass (bsc#963002).
• CVE-2015-7979: Off-path Denial of Service (DoS) attack on authenticated broadcast mode (bsc#962784).
• CVE-2015-7978: Stack exhaustion in recursive traversal of restriction list (bsc#963000).
• CVE-2015-7977: reslist NULL pointer dereference (bsc#962970).
• CVE-2015-7976: ntpq saveconfig command allows dangerous characters in filenames (bsc#962802).
• CVE-2015-7975: nextvar() missing length check (bsc#962988).
• CVE-2015-7974: Skeleton Key: Missing key check allows impersonation between authenticated peers (bsc#962960).
• CVE-2015-7973: Replay attack on authenticated broadcast mode (bsc#962995).
• CVE-2015-8140: ntpq vulnerable to replay attacks (bsc#962994).
• CVE-2015-8139: Origin Leak: ntpq and ntpdc, disclose origin (bsc#962997).
• CVE-2015-5300: MITM attacker could have forced ntpd to make a step larger than the panic threshold (bsc#951629).

These non-security issues were fixed:

• fate#320758 bsc#975981: Enable compile-time support for MS-SNTP (--enable-ntp-signd). This replaces the w32 patches in 4.2.4 that added the authreg directive.
• bsc#962318: Call /usr/sbin/sntp with full path to synchronize in start-ntpd. When run as cron job, /usr/sbin/ is not in the path, which caused the synchronization to fail.
• bsc#782060: Speedup ntpq.
• bsc#916617: Add /var/db/ntp-kod.
• bsc#956773: Add ntp-ENOBUFS.patch to limit a warning that might happen quite a lot on loaded systems.
• bsc#951559,bsc#975496: Fix the TZ offset output of sntp during DST.
• Add ntp-fork.patch and build with threads disabled to allow name resolution even when running chrooted.

ntp was updated to version 4.2.8p6 to fix 28 security issues.

Major functional changes:

• The 'sntp' commandline tool changed its option handling in a major way, some options have been renamed or dropped.
• 'controlkey 1' is added during update to ntp.conf to allow sntp to work.
• The local clock is being disabled during update.
• ntpd is no longer running chrooted.

Other functional changes:

• ntp-signd is installed.
• 'enable mode7' can be added to the configuration to allow ntdpc to work as compatibility mode option.
• 'kod' was removed from the default restrictions.
• SHA1 keys are used by default instead of MD5 keys.

Also yast2-ntp-client was updated to match some sntp syntax changes. (bsc#937837)

These security issues were fixed:

• CVE-2015-8158: Fixed potential infinite loop in ntpq (bsc#962966).
• CVE-2015-8138: Zero Origin Timestamp Bypass (bsc#963002).
• CVE-2015-7979: Off-path Denial of Service (DoS) attack on authenticated broadcast mode (bsc#962784).
• CVE-2015-7978: Stack exhaustion in recursive traversal of restriction list (bsc#963000).
• CVE-2015-7977: reslist NULL pointer dereference (bsc#962970).
• CVE-2015-7976: ntpq saveconfig command allows dangerous characters in filenames (bsc#962802).
• CVE-2015-7975: nextvar() missing length check (bsc#962988).
• CVE-2015-7974: Skeleton Key: Missing key check allows impersonation between authenticated peers (bsc#962960).
• CVE-2015-7973: Replay attack on authenticated broadcast mode (bsc#962995).
• CVE-2015-8140: ntpq vulnerable to replay attacks (bsc#962994).
• CVE-2015-8139: Origin Leak: ntpq and ntpdc, disclose origin (bsc#962997).
• CVE-2015-5300: MITM attacker could have forced ntpd to make a step larger than the panic threshold (bsc#951629).
• CVE-2015-7871: NAK to the Future: Symmetric association authentication bypass via crypto-NAK (bsc#951608).
• CVE-2015-7855: decodenetnum() will ASSERT botch instead of returning FAIL on some bogus values (bsc#951608).
• CVE-2015-7854: Password Length Memory Corruption Vulnerability (bsc#951608).
• CVE-2015-7853: Invalid length data provided by a custom refclock driver could cause a buffer overflow (bsc#951608).
• CVE-2015-7852: ntpq atoascii() Memory Corruption Vulnerability (bsc#951608).
• CVE-2015-7851: saveconfig Directory Traversal Vulnerability (bsc#951608).
• CVE-2015-7850: remote config logfile-keyfile (bsc#951608).
• CVE-2015-7849: trusted key use-after-free (bsc#951608).
• CVE-2015-7848: mode 7 loop counter underrun (bsc#951608).
• CVE-2015-7701: Slow memory leak in CRYPTO_ASSOC (bsc#951608).
• CVE-2015-7703: configuration directives 'pidfile' and 'driftfile' should only be allowed locally (bsc#951608).
• CVE-2015-7704, CVE-2015-7705: Clients that receive a KoD should validate the origin timestamp field (bsc#951608).
• CVE-2015-7691, CVE-2015-7692, CVE-2015-7702: Incomplete autokey data packet length checks (bsc#951608).

These non-security issues were fixed:

• fate#320758 bsc#975981: Enable compile-time support for MS-SNTP (--enable-ntp-signd). This replaces the w32 patches in 4.2.4 that added the authreg directive.
• bsc#962318: Call /usr/sbin/sntp with full path to synchronize in start-ntpd. When run as cron job, /usr/sbin/ is not in the path, which caused the synchronization to fail.
• bsc#782060: Speedup ntpq.
• bsc#916617: Add /var/db/ntp-kod.
• bsc#956773: Add ntp-ENOBUFS.patch to limit a warning that might happen quite a lot on loaded systems.
• bsc#951559,bsc#975496: Fix the TZ offset output of sntp during DST.
• Add ntp-fork.patch and build with threads disabled to allow name resolution even when running chrooted.
• Add a controlkey line to /etc/ntp.conf if one does not already exist to allow runtime configuuration via ntpq.
• bsc#946386: Temporarily disable memlock to avoid problems due to high memory usage during name resolution.
• bsc#905885: Use SHA1 instead of MD5 for symmetric keys.
• Improve runtime configuration:
  • Read keytype from ntp.conf
  • Don't write ntp keys to syslog. -…

This network time protocol server ntp was updated to 4.2.8p6 to fix the following issues:

Also yast2-ntp-client was updated to match some sntp syntax changes. (bsc#937837)

Major functional changes:

• The 'sntp' commandline tool changed its option handling in a major way.
• 'controlkey 1' is added during update to ntp.conf to allow sntp to work.
• The local clock is being disabled during update.
• ntpd is no longer running chrooted.

Other functional changes:

• ntp-signd is installed.
• 'enable mode7' can be added to the configuration to allow ntdpc to work as compatibility mode option.
• 'kod' was removed from the default restrictions.
• SHA1 keys are used by default instead of MD5 keys.

These security issues were fixed:

• CVE-2015-5219: An endless loop due to incorrect precision to double conversion (bsc#943216).
• CVE-2015-8158: Fixed potential infinite loop in ntpq (bsc#962966).
• CVE-2015-8138: Zero Origin Timestamp Bypass (bsc#963002).
• CVE-2015-7979: Off-path Denial of Service (DoS) attack on authenticated broadcast mode (bsc#962784).
• CVE-2015-7978: Stack exhaustion in recursive traversal of restriction list (bsc#963000).
• CVE-2015-7977: reslist NULL pointer dereference (bsc#962970).
• CVE-2015-7976: ntpq saveconfig command allows dangerous characters in filenames (bsc#962802).
• CVE-2015-7975: nextvar() missing length check (bsc#962988).
• CVE-2015-7974: Skeleton Key: Missing key check allows impersonation between authenticated peers (bsc#962960).
• CVE-2015-7973: Replay attack on authenticated broadcast mode (bsc#962995).
• CVE-2015-8140: ntpq vulnerable to replay attacks (bsc#962994).
• CVE-2015-8139: Origin Leak: ntpq and ntpdc, disclose origin (bsc#962997).
• CVE-2015-5300: MITM attacker could have forced ntpd to make a step larger than the panic threshold (bsc#951629).
• CVE-2015-7871: NAK to the Future: Symmetric association authentication bypass via crypto-NAK (bsc#951608).
• CVE-2015-7855: decodenetnum() will ASSERT botch instead of returning FAIL on some bogus values (bsc#951608).
• CVE-2015-7854: Password Length Memory Corruption Vulnerability (bsc#951608).
• CVE-2015-7853: Invalid length data provided by a custom refclock driver could cause a buffer overflow (bsc#951608).
• CVE-2015-7852: ntpq atoascii() Memory Corruption Vulnerability (bsc#951608).
• CVE-2015-7851: saveconfig Directory Traversal Vulnerability (bsc#951608).
• CVE-2015-7850: remote config logfile-keyfile (bsc#951608).
• CVE-2015-7849: trusted key use-after-free (bsc#951608).
• CVE-2015-7848: mode 7 loop counter underrun (bsc#951608).
• CVE-2015-7701: Slow memory leak in CRYPTO_ASSOC (bsc#951608).
• CVE-2015-7703: configuration directives 'pidfile' and 'driftfile' should only be allowed locally (bsc#951608).
• CVE-2015-7704, CVE-2015-7705: Clients that receive a KoD should validate the origin timestamp field (bsc#951608).
• CVE-2015-7691, CVE-2015-7692, CVE-2015-7702: Incomplete autokey data packet length checks (bsc#951608).

These non-security issues were fixed:

• fate#320758 bsc#975981: Enable compile-time support for MS-SNTP (--enable-ntp-signd). This replaces the w32 patches in 4.2.4 that added the authreg directive.
• bsc#962318: Call /usr/sbin/sntp with full path to synchronize in start-ntpd. When run as cron job, /usr/sbin/ is not in the path, which caused the synchronization to fail.
• bsc#782060: Speedup ntpq.
• bsc#916617: Add /var/db/ntp-kod.
• bsc#956773: Add ntp-ENOBUFS.patch to limit a warning that might happen quite a lot on loaded systems.
• bsc#951559,bsc#975496: Fix the TZ offset output of sntp during DST.
• Add ntp-fork.patch and build with threads disabled to allow name resolution even when running chrooted.
• Add a controlkey line to /etc/ntp.conf if one does not already exist to allow runtime configuuration via ntpq.
• bsc#946386: Temporarily disable memlock to avoid problems due to high memory usage during name resolution.
• bsc#905885: Use SHA1 instead of MD5 for symmetric keys.
• Improve runtime…

This update for ntp fixes the following issues:

• Simplify ntpd's search for its own executable to prevent AppArmor warnings (bsc#956365).

Security issues fixed (update to 4.2.8p9):

• CVE-2016-9311, CVE-2016-9310, bsc#1011377: Mode 6 unauthenticated trap information disclosure and DDoS vector.
• CVE-2016-7427, bsc#1011390: Broadcast Mode Replay Prevention DoS.
• CVE-2016-7428, bsc#1011417: Broadcast Mode Poll Interval Enforcement DoS.
• CVE-2016-7431, bsc#1011395: Regression: 010-origin: Zero Origin Timestamp Bypass.
• CVE-2016-7434, bsc#1011398: Null pointer dereference in _IO_str_init_static_internal().
• CVE-2016-7429, bsc#1011404: Interface selection attack.
• CVE-2016-7426, bsc#1011406: Client rate limiting and server responses.
• CVE-2016-7433, bsc#1011411: Reboot sync calculation problem.
• CVE-2015-5219: An endless loop due to incorrect precision to double conversion (bsc#943216).
• CVE-2015-8140: ntpq vulnerable to replay attacks.
• CVE-2015-8139: Origin Leak: ntpq and ntpdc, disclose origin.
• CVE-2015-5219: An endless loop due to incorrect precision to double conversion (bsc#943216).

Non-security issues fixed:

• Fix a spurious error message.
• Other bugfixes, see /usr/share/doc/packages/ntp/ChangeLog.
• Fix a regression in 'trap' (bsc#981252).
• Reduce the number of netlink groups to listen on for changes to the local network setup (bsc#992606).
• Fix segfault in 'sntp -a' (bsc#1009434).
• Silence an OpenSSL version warning (bsc#992038).
• Make the resolver task change user and group IDs to the same values as the main task. (bsc#988028)

This update for ntp fixes the following issues:

ntp was updated to 4.2.8p9.

Security issues fixed:

• CVE-2016-9311, CVE-2016-9310, bsc#1011377: Mode 6 unauthenticated trap information disclosure and DDoS vector.
• CVE-2016-7427, bsc#1011390: Broadcast Mode Replay Prevention DoS.
• CVE-2016-7428, bsc#1011417: Broadcast Mode Poll Interval Enforcement DoS.
• CVE-2016-7431, bsc#1011395: Regression: 010-origin: Zero Origin Timestamp Bypass.
• CVE-2016-7434, bsc#1011398: Null pointer dereference in _IO_str_init_static_internal().
• CVE-2016-7429, bsc#1011404: Interface selection attack.
• CVE-2016-7426, bsc#1011406: Client rate limiting and server responses.
• CVE-2016-7433, bsc#1011411: Reboot sync calculation problem.
• CVE-2015-8140: ntpq vulnerable to replay attacks.
• CVE-2015-8139: Origin Leak: ntpq and ntpdc, disclose origin.
• CVE-2015-5219: An endless loop due to incorrect precision to double conversion (bsc#943216).

Non-security issues fixed:

• Fix a spurious error message.
• Other bugfixes, see /usr/share/doc/packages/ntp/ChangeLog.
• Fix a regression in 'trap' (bsc#981252).
• Reduce the number of netlink groups to listen on for changes to the local network setup (bsc#992606).
• Fix segfault in 'sntp -a' (bsc#1009434).
• Silence an OpenSSL version warning (bsc#992038).
• Make the resolver task change user and group IDs to the same values as the main task. (bsc#988028)
• Simplify ntpd's search for its own executable to prevent AppArmor warnings (bsc#956365).