CVE-2018-8781

The udl_fb_mmap function in drivers/gpu/drm/udl/udl_fb.c at the Linux kernel version 3.4 and up to and including 4.15 has an integer-overflow vulnerability allowing local users with access to the udldrmfb driver to obtain full read and write permissions on kernel physical pages, resulting in a code execution in kernel space.

The SUSE Linux Enterprise 12 SP2 LTSS kernel was updated to 4.4.121 to receive various security and bugfixes.

The following security bugs were fixed:

• CVE-2018-8781: The udl_fb_mmap function in drivers/gpu/drm/udl/udl_fb.c had an integer-overflow vulnerability that allowed local users with access to the udldrmfb driver to obtain full read and write permissions on kernel physical pages, resulting in a code execution in kernel space (bnc#1090643).
• CVE-2018-10124: The kill_something_info function in kernel/signal.c might have allowed local users to cause a denial of service via an INT_MIN argument (bnc#1089752).
• CVE-2018-10087: The kernel_wait4 function in kernel/exit.c might have allowed local users to cause a denial of service by triggering an attempted use of the -INT_MIN value (bnc#1089608).
• CVE-2017-18257: The __get_data_block function in fs/f2fs/data.c in the Linux kernel allowed local users to cause a denial of service (integer overflow and loop) via crafted use of the open and fallocate system calls with an FS_IOC_FIEMAP ioctl. (bnc#1088241)
• CVE-2018-8822: Incorrect buffer length handling in the ncp_read_kernel function in fs/ncpfs/ncplib_kernel.c could be exploited by malicious NCPFS servers to crash the kernel or execute code (bnc#1086162).
• CVE-2018-8043: The unimac_mdio_probe function in drivers/net/phy/mdio-bcm-unimac.c did not validate certain resource availability, which allowed local users to cause a denial of service (NULL pointer dereference) (bnc#1084829).
• CVE-2018-7740: The resv_map_release function in mm/hugetlb.c allowed local users to cause a denial of service (BUG) via a crafted application that made mmap system calls and has a large pgoff argument to the remap_file_pages system call (bnc#1084353).
• CVE-2018-1087: And an unprivileged KVM guest user could use this flaw to potentially escalate their privileges inside a guest. (bsc#1087088)
• CVE-2018-8897: An unprivileged system user could use incorrect set up interrupt stacks to crash the Linux kernel resulting in DoS issue. (bsc#1087088)

The following non-security bugs were fixed:

• alsa: hda/realtek - Fix speaker no sound after system resume (bsc#1031717).
• alsa: hda: Add a power_save blacklist (bnc#1012382).
• alsa: usb-audio: Add a quirck for B&W PX headphones (bnc#1012382).
• arm: dts: LogicPD Torpedo: Fix I2C1 pinmux (bnc#1012382).
• arm: mvebu: Fix broken PL310_ERRATA_753970 selects (bnc#1012382).
• kvm: mmu: Fix overlap between public and private memslots (bnc#1012382).
• Partial revert 'e1000e: Avoid receiver overrun interrupt bursts' (bsc#1075428).
• Revert 'e1000e: Separate signaling for link check/link up' (bsc#1075428).
• Revert 'led: core: Fix brightness setting when setting delay_off=0' (bnc#1012382).
• Revert 'watchdog: hpwdt: Remove legacy NMI sourcing (bsc#1085185).' This reverts commit 5d4a2355a2a1c2ec6fdf9d18b68ca0a04ff73c70.
• bpf, x64: implement retpoline for tail call (bnc#1012382).
• bridge: check brport attr show in brport_show (bnc#1012382).
• btrfs: Only check first key for committed tree blocks (bsc#1084721).
• btrfs: Validate child tree block's level and first key (bsc#1084721).
• btrfs: preserve i_mode if __btrfs_set_acl() fails (bnc#1012382).
• ch9200: use skb_cow_head() to deal with cloned skbs (bsc#1088684).
• cpufreq: s3c24xx: Fix broken s3c_cpufreq_init() (bnc#1012382).
• dcache: Add cond_resched in shrink_dentry_list (bsc#1086194).
• dm io: fix duplicate bio completion due to missing ref count (bnc#1012382).
• drm/i915/cmdparser: Do not check past the cmd length (bsc#1031717).
• drm/i915/psr: Check for the specific AUX_FRAME_SYNC cap bit (bsc#1031717).
• e1000e: Avoid missed interrupts following ICR read (bsc#1075428).
• e1000e: Avoid receiver overrun interrupt bursts (bsc#1075428).
• e1000e: Fix check_for_link return value with autoneg off (bsc#1075428).
• e1000e: Fix link check race condition (bsc#1075428).
• e1000e: Fix queue interrupt re-raising in Other interrupt (bsc#1075428).
• e1000e: Remove…

The SUSE Linux Enterprise 12 SP2 LTSS kernel was updated to 4.4.121 to receive various security and bugfixes.

The following security bugs were fixed:

• CVE-2018-8781: The udl_fb_mmap function in drivers/gpu/drm/udl/udl_fb.c had an integer-overflow vulnerability that allowed local users with access to the udldrmfb driver to obtain full read and write permissions on kernel physical pages, resulting in a code execution in kernel space (bnc#1090643).
• CVE-2018-10124: The kill_something_info function in kernel/signal.c might have allowed local users to cause a denial of service via an INT_MIN argument (bnc#1089752).
• CVE-2018-10087: The kernel_wait4 function in kernel/exit.c might have allowed local users to cause a denial of service by triggering an attempted use of the -INT_MIN value (bnc#1089608).
• CVE-2017-18257: The __get_data_block function in fs/f2fs/data.c in the Linux kernel allowed local users to cause a denial of service (integer overflow and loop) via crafted use of the open and fallocate system calls with an FS_IOC_FIEMAP ioctl. (bnc#1088241)
• CVE-2018-8822: Incorrect buffer length handling in the ncp_read_kernel function in fs/ncpfs/ncplib_kernel.c could be exploited by malicious NCPFS servers to crash the kernel or execute code (bnc#1086162).
• CVE-2018-8043: The unimac_mdio_probe function in drivers/net/phy/mdio-bcm-unimac.c did not validate certain resource availability, which allowed local users to cause a denial of service (NULL pointer dereference) (bnc#1084829).
• CVE-2018-7740: The resv_map_release function in mm/hugetlb.c allowed local users to cause a denial of service (BUG) via a crafted application that made mmap system calls and has a large pgoff argument to the remap_file_pages system call (bnc#1084353).
• CVE-2018-1087: And an unprivileged KVM guest user could use this flaw to potentially escalate their privileges inside a guest. (bsc#1087088)
• CVE-2018-8897: An unprivileged system user could use incorrect set up interrupt stacks to crash the Linux kernel resulting in DoS issue. (bsc#1087088)

The following non-security bugs were fixed:

• alsa: hda/realtek - Fix speaker no sound after system resume (bsc#1031717).
• alsa: hda: Add a power_save blacklist (bnc#1012382).
• alsa: usb-audio: Add a quirck for B&W PX headphones (bnc#1012382).
• arm: dts: LogicPD Torpedo: Fix I2C1 pinmux (bnc#1012382).
• arm: mvebu: Fix broken PL310_ERRATA_753970 selects (bnc#1012382).
• kvm: mmu: Fix overlap between public and private memslots (bnc#1012382).
• Partial revert 'e1000e: Avoid receiver overrun interrupt bursts' (bsc#1075428).
• Revert 'e1000e: Separate signaling for link check/link up' (bsc#1075428).
• Revert 'led: core: Fix brightness setting when setting delay_off=0' (bnc#1012382).
• Revert 'watchdog: hpwdt: Remove legacy NMI sourcing (bsc#1085185).' This reverts commit 5d4a2355a2a1c2ec6fdf9d18b68ca0a04ff73c70.
• bpf, x64: implement retpoline for tail call (bnc#1012382).
• bridge: check brport attr show in brport_show (bnc#1012382).
• btrfs: Only check first key for committed tree blocks (bsc#1084721).
• btrfs: Validate child tree block's level and first key (bsc#1084721).
• btrfs: preserve i_mode if __btrfs_set_acl() fails (bnc#1012382).
• ch9200: use skb_cow_head() to deal with cloned skbs (bsc#1088684).
• cpufreq: s3c24xx: Fix broken s3c_cpufreq_init() (bnc#1012382).
• dcache: Add cond_resched in shrink_dentry_list (bsc#1086194).
• dm io: fix duplicate bio completion due to missing ref count (bnc#1012382).
• drm/i915/cmdparser: Do not check past the cmd length (bsc#1031717).
• drm/i915/psr: Check for the specific AUX_FRAME_SYNC cap bit (bsc#1031717).
• e1000e: Avoid missed interrupts following ICR read (bsc#1075428).
• e1000e: Avoid receiver overrun interrupt bursts (bsc#1075428).
• e1000e: Fix check_for_link return value with autoneg off (bsc#1075428).
• e1000e: Fix link check race condition (bsc#1075428).
• e1000e: Fix queue interrupt re-raising in Other interrupt (bsc#1075428).
• e1000e: Remove…

The SUSE Linux Enterprise 12 SP1 LTSS kernel was updated to receive various security and bugfixes.

The following security bugs were fixed:

• CVE-2018-1087: And an unprivileged KVM guest user could use this flaw to potentially escalate their privileges inside a guest. (bsc#1087088)
• CVE-2018-8897: An unprivileged system user could use incorrect set up interrupt stacks to crash the Linux kernel resulting in DoS issue. (bsc#1087088)
• CVE-2018-8781: The udl_fb_mmap function in drivers/gpu/drm/udl/udl_fb.c had an integer-overflow vulnerability allowing local users with access to the udldrmfb driver to obtain full read and write permissions on kernel physical pages, resulting in a code execution in kernel space (bnc#1090643).
• CVE-2018-10124: The kill_something_info function in kernel/signal.c might allow local users to cause a denial of service via an INT_MIN argument (bnc#1089752).
• CVE-2018-10087: The kernel_wait4 function in kernel/exit.c in might allow local users to cause a denial of service by triggering an attempted use of the -INT_MIN value (bnc#1089608).
• CVE-2018-7757: Memory leak in the sas_smp_get_phy_events function in drivers/scsi/libsas/sas_expander.c allowed local users to cause a denial of service (memory consumption) via many read accesses to files in the /sys/class/sas_phy directory, as demonstrated by the /sys/class/sas_phy/phy-1:0:12/invalid_dword_count file (bnc#1084536).
• CVE-2017-13220: An elevation of privilege vulnerability in the Upstream kernel bluez was fixed. (bnc#1076537).
• CVE-2017-11089: A buffer overread is observed in nl80211_set_station when user space application sends attribute NL80211_ATTR_LOCAL_MESH_POWER_MODE with data of size less than 4 bytes (bnc#1088261).
• CVE-2017-0861: Use-after-free vulnerability in the snd_pcm_info function in the ALSA subsystem allowed attackers to gain privileges via unspecified vectors (bnc#1088260).
• CVE-2018-8822: Incorrect buffer length handling in the ncp_read_kernel function in fs/ncpfs/ncplib_kernel.c could be exploited by malicious NCPFS servers to crash the kernel or execute code (bnc#1086162).
• CVE-2017-18203: The dm_get_from_kobject function in drivers/md/dm.c allowed local users to cause a denial of service (BUG) by leveraging a race condition with __dm_destroy during creation and removal of DM devices (bnc#1083242).

The following non-security bugs were fixed:

• Integrate fixes resulting from bsc#1088147 More info in the respective commit messages.
• kabi: x86/kaiser: properly align trampoline stack (bsc#1087260).
• dcache: Add cond_resched in shrink_dentry_list (bsc#1086194).
• kGraft: fix small race in reversion code (bsc#1083125).
• kabi/severities: Ignore kgr_shadow_* kABI changes
• kvm/x86: fix icebp instruction handling (bsc#1087088).
• livepatch: Allow to call a custom callback when freeing shadow variables (bsc#1082299 fate#313296).
• livepatch: Initialize shadow variables safely by a custom callback (bsc#1082299 fate#313296).
• usbnet: Fix a race between usbnet_stop() and the BH (bsc#1083275).
• x86/entry/64: Do not use IST entry for #BP stack (bsc#1087088).
• x86/espfix: Fix return stack in do_double_fault() (bsc#1085279).
• x86/kaiser: properly align trampoline stack (bsc#1087260).
• x86/retpoline: do not perform thunk calls in ring3 vsyscall code (bsc#1085331).

The SUSE Linux Enterprise 12 GA LTSS kernel was updated to receive various security and bugfixes.

The following security bugs were fixed:

• CVE-2018-1087: And an unprivileged KVM guest user could use this flaw to potentially escalate their privileges inside a guest. (bsc#1087088)
• CVE-2018-8897: An unprivileged system user could use incorrect set up interrupt stacks to crash the Linux kernel resulting in DoS issue. (bsc#1087088)
• CVE-2018-8781: The udl_fb_mmap function in drivers/gpu/drm/udl/udl_fb.c had an integer-overflow vulnerability allowing local users with access to the udldrmfb driver to obtain full read and write permissions on kernel physical pages, resulting in a code execution in kernel space (bnc#1090643).
• CVE-2018-10124: The kill_something_info function in kernel/signal.c might allow local users to cause a denial of service via an INT_MIN argument (bnc#1089752).
• CVE-2018-10087: The kernel_wait4 function in kernel/exit.c might allow local users to cause a denial of service by triggering an attempted use of the -INT_MIN value (bnc#1089608).
• CVE-2018-7757: Memory leak in the sas_smp_get_phy_events function in drivers/scsi/libsas/sas_expander.c allowed local users to cause a denial of service (memory consumption) via many read accesses to files in the /sys/class/sas_phy directory, as demonstrated by the /sys/class/sas_phy/phy-1:0:12/invalid_dword_count file (bnc#1084536 1087209).
• CVE-2017-13220: An elevation of privilege vulnerability in the Upstream kernel bluez was fixed. (bnc#1076537).
• CVE-2017-11089: A buffer overread was observed in nl80211_set_station when user space application sends attribute NL80211_ATTR_LOCAL_MESH_POWER_MODE with data of size less than 4 bytes (bnc#1088261).
• CVE-2017-0861: Use-after-free vulnerability in the snd_pcm_info function in the ALSA subsystem allowed attackers to gain privileges via unspecified vectors (bnc#1088260).
• CVE-2018-8822: Incorrect buffer length handling in the ncp_read_kernel function in fs/ncpfs/ncplib_kernel.c could be exploited by malicious NCPFS servers to crash the kernel or execute code (bnc#1086162).
• CVE-2017-18203: The dm_get_from_kobject function in drivers/md/dm.c allow local users to cause a denial of service (BUG) by leveraging a race condition with __dm_destroy during creation and removal of DM devices (bnc#1083242).

The following non-security bugs were fixed:

• Integrate fixes resulting from bsc#1088147 More info in the respective commit messages.
• KABI: x86/kaiser: properly align trampoline stack (bsc#1087260).
• kGraft: fix small race in reversion code (bsc#1083125).
• kabi/severities: Ignore kgr_shadow_* kABI changes
• kvm/x86: fix icebp instruction handling (bsc#1087088).
• livepatch: Allow to call a custom callback when freeing shadow variables (bsc#1082299 fate#313296).
• livepatch: Initialize shadow variables safely by a custom callback (bsc#1082299 fate#313296).
• x86/entry/64: Do not use IST entry for #BP stack (bsc#1087088).
• x86/kaiser: properly align trampoline stack (bsc#1087260).
• x86/retpoline: do not perform thunk calls in ring3 vsyscall code (bsc#1085331).

The SUSE Linux Enterprise 12 SP3 kernel was updated to 4.4.131 to receive various security and bugfixes.

The following security bugs were fixed:

• CVE-2018-3639: Information leaks using 'Memory Disambiguation' feature in modern CPUs were mitigated, aka 'Spectre Variant 4' (bnc#1087082).

  A new boot commandline option was introduced, 'spec_store_bypass_disable', which can have following values:

  • auto: Kernel detects whether your CPU model contains an implementation of Speculative Store Bypass and picks the most appropriate mitigation.
  • on: disable Speculative Store Bypass
  • off: enable Speculative Store Bypass
  • prctl: Control Speculative Store Bypass per thread via prctl. Speculative Store Bypass is enabled for a process by default. The state of the control is inherited on fork.
  • seccomp: Same as 'prctl' above, but all seccomp threads will disable SSB unless they explicitly opt out.

  The default is 'seccomp', meaning programs need explicit opt-in into the mitigation.

  Status can be queried via the /sys/devices/system/cpu/vulnerabilities/spec_store_bypass file, containing:

  • 'Vulnerable'
  • 'Mitigation: Speculative Store Bypass disabled'
  • 'Mitigation: Speculative Store Bypass disabled via prctl'
  • 'Mitigation: Speculative Store Bypass disabled via prctl and seccomp'

• CVE-2018-8781: The udl_fb_mmap function in drivers/gpu/drm/udl/udl_fb.c had an integer-overflow vulnerability allowing local users with access to the udldrmfb driver to obtain full read and write permissions on kernel physical pages, resulting in a code execution in kernel space (bnc#1090643).

• CVE-2018-10124: The kill_something_info function in kernel/signal.c might have allowed local users to cause a denial of service via an INT_MIN argument (bnc#1089752).

• CVE-2018-10087: The kernel_wait4 function in kernel/exit.c might have allowed local users to cause a denial of service by triggering an attempted use of the -INT_MIN value (bnc#1089608).

• CVE-2018-1000199: An address corruption flaw was discovered while modifying a h/w breakpoint via 'modify_user_hw_breakpoint' routine, an unprivileged user/process could use this flaw to crash the system kernel resulting in DoS OR to potentially escalate privileges on a the system. (bsc#1089895)

• CVE-2018-1130: The Linux kernel was vulnerable to a null pointer dereference in dccp_write_xmit() function in net/dccp/output.c in that allowed a local user to cause a denial of service by a number of certain crafted system calls (bnc#1092904).

• CVE-2018-5803: An error in the _sctp_make_chunk() function when handling SCTP, packet length could have been exploited by a malicious local user to cause a kernel crash and a DoS. (bnc#1083900).

• CVE-2018-1065: The netfilter subsystem mishandled the case of a rule blob that contains a jump but lacks a user-defined chain, which allowed local users to cause a denial of service (NULL pointer dereference) by leveraging the CAP_NET_RAW or CAP_NET_ADMIN capability, related to arpt_do_table in net/ipv4/netfilter/arp_tables.c, ipt_do_table in net/ipv4/netfilter/ip_tables.c, and ip6t_do_table in net/ipv6/netfilter/ip6_tables.c (bnc#1083650 1091925).

• CVE-2018-7492: A NULL pointer dereference was found in the net/rds/rdma.c __rds_rdma_map() function allowing local attackers to cause a system panic and a denial-of-service, related to RDS_GET_MR and RDS_GET_MR_FOR_DEST (bnc#1082962).

The following non-security bugs were fixed:

• acpica: Disassembler: Abort on an invalid/unknown AML opcode (bnc#1012382).
• acpica: Events: Add runtime stub support for event APIs (bnc#1012382).
• acpi / hotplug / PCI: Check presence of slot itself in get_slot_status() (bnc#1012382).
• acpi, PCI, irq: remove redundant check for null string pointer (bnc#1012382).
• acpi / scan: Send change uevent with offine environmental data (bsc#1082485).
• acpi / video: Add quirk to force acpi-video backlight on Samsung…

This update for the Linux Kernel 4.4.74-92_29 fixes several issues.

The following security issues were fixed:

• CVE-2017-13166: An elevation of privilege vulnerability in the kernel v4l2 video driver was fixed. (bsc#1085447).
• CVE-2018-8897: A statement in the System Programming Guide of the Intel 64 and IA-32 Architectures Software Developer's Manual (SDM) was mishandled in the development of some or all operating-system kernels, resulting in unexpected behavior for #DB exceptions that are deferred by MOV SS or POP SS, as demonstrated by (for example) privilege escalation in Windows, macOS, some Xen configurations, or FreeBSD, or a Linux kernel crash. The MOV to SS and POP SS instructions inhibit interrupts (including NMIs), data breakpoints, and single step trap exceptions until the instruction boundary following the next instruction (SDM Vol. 3A; section 6.8.3). (The inhibited data breakpoints are those on memory accessed by the MOV to SS or POP to SS instruction itself.) Note that debug exceptions are not inhibited by the interrupt enable (EFLAGS.IF) system flag (SDM Vol. 3A; section 2.3). If the instruction following the MOV to SS or POP to SS instruction is an instruction like SYSCALL, SYSENTER, INT 3, etc. that transfers control to the operating system at CPL < 3, the debug exception is delivered after the transfer to CPL < 3 is complete. OS kernels may not expect this order of events and may therefore experience unexpected behavior when it occurs (bsc#1090368).
• CVE-2018-8781: The udl_fb_mmap function in drivers/gpu/drm/udl/udl_fb.c had an integer-overflow vulnerability allowing local users with access to the udldrmfb driver to obtain full read and write permissions on kernel physical pages, resulting in a code execution in kernel space (bsc#1090646).
• bsc#1083125: Fixed kgraft: small race in reversion code
• CVE-2018-1087: kernel KVM was vulnerable to a flaw in the way the Linux kernel's KVM hypervisor handled exceptions delivered after a stack switch operation via Mov SS or Pop SS instructions. During the stack switch operation, the processor did not deliver interrupts and exceptions, rather they are delivered once the first instruction after the stack switch is executed. An unprivileged KVM guest user could use this flaw to crash the guest or, potentially, escalate their privileges in the guest (bsc#1090869) before

This update for the Linux Kernel 3.12.74-60_64_45 fixes several issues.

The following security issues were fixed:

• CVE-2017-13166: An elevation of privilege vulnerability in the kernel v4l2 video driver was fixed. (bsc#1085447).
• CVE-2018-8897: A statement in the System Programming Guide of the Intel 64 and IA-32 Architectures Software Developer's Manual (SDM) was mishandled in the development of some or all operating-system kernels, resulting in unexpected behavior for #DB exceptions that are deferred by MOV SS or POP SS, as demonstrated by (for example) privilege escalation in Windows, macOS, some Xen configurations, or FreeBSD, or a Linux kernel crash. The MOV to SS and POP SS instructions inhibit interrupts (including NMIs), data breakpoints, and single step trap exceptions until the instruction boundary following the next instruction (SDM Vol. 3A; section 6.8.3). (The inhibited data breakpoints are those on memory accessed by the MOV to SS or POP to SS instruction itself.) Note that debug exceptions are not inhibited by the interrupt enable (EFLAGS.IF) system flag (SDM Vol. 3A; section 2.3). If the instruction following the MOV to SS or POP to SS instruction is an instruction like SYSCALL, SYSENTER, INT 3, etc. that transfers control to the operating system at CPL < 3, the debug exception is delivered after the transfer to CPL < 3 is complete. OS kernels may not expect this order of events and may therefore experience unexpected behavior when it occurs (bsc#1090368).
• CVE-2018-8781: The udl_fb_mmap function in drivers/gpu/drm/udl/udl_fb.c had an integer-overflow vulnerability allowing local users with access to the udldrmfb driver to obtain full read and write permissions on kernel physical pages, resulting in a code execution in kernel space (bsc#1090646).
• bsc#1083125: Fixed kgraft: small race in reversion code

This update for the Linux Kernel 3.12.74-60_64_69 fixes several issues.

The following security issues were fixed:

• CVE-2017-13166: An elevation of privilege vulnerability in the kernel v4l2 video driver was fixed. (bsc#1085447).
• CVE-2018-8897: A statement in the System Programming Guide of the Intel 64 and IA-32 Architectures Software Developer's Manual (SDM) was mishandled in the development of some or all operating-system kernels, resulting in unexpected behavior for #DB exceptions that are deferred by MOV SS or POP SS, as demonstrated by (for example) privilege escalation in Windows, macOS, some Xen configurations, or FreeBSD, or a Linux kernel crash. The MOV to SS and POP SS instructions inhibit interrupts (including NMIs), data breakpoints, and single step trap exceptions until the instruction boundary following the next instruction (SDM Vol. 3A; section 6.8.3). (The inhibited data breakpoints are those on memory accessed by the MOV to SS or POP to SS instruction itself.) Note that debug exceptions are not inhibited by the interrupt enable (EFLAGS.IF) system flag (SDM Vol. 3A; section 2.3). If the instruction following the MOV to SS or POP to SS instruction is an instruction like SYSCALL, SYSENTER, INT 3, etc. that transfers control to the operating system at CPL < 3, the debug exception is delivered after the transfer to CPL < 3 is complete. OS kernels may not expect this order of events and may therefore experience unexpected behavior when it occurs (bsc#1090368).
• CVE-2018-8781: The udl_fb_mmap function in drivers/gpu/drm/udl/udl_fb.c had an integer-overflow vulnerability allowing local users with access to the udldrmfb driver to obtain full read and write permissions on kernel physical pages, resulting in a code execution in kernel space (bsc#1090646).
• bsc#1083125: Fixed kgraft: small race in reversion code

This update for the Linux Kernel 4.4.103-92_56 fixes several issues.

The following security issues were fixed:

• CVE-2017-13166: An elevation of privilege vulnerability in the kernel v4l2 video driver was fixed. (bsc#1085447).
• CVE-2018-8897: A statement in the System Programming Guide of the Intel 64 and IA-32 Architectures Software Developer's Manual (SDM) was mishandled in the development of some or all operating-system kernels, resulting in unexpected behavior for #DB exceptions that are deferred by MOV SS or POP SS, as demonstrated by (for example) privilege escalation in Windows, macOS, some Xen configurations, or FreeBSD, or a Linux kernel crash. The MOV to SS and POP SS instructions inhibit interrupts (including NMIs), data breakpoints, and single step trap exceptions until the instruction boundary following the next instruction (SDM Vol. 3A; section 6.8.3). (The inhibited data breakpoints are those on memory accessed by the MOV to SS or POP to SS instruction itself.) Note that debug exceptions are not inhibited by the interrupt enable (EFLAGS.IF) system flag (SDM Vol. 3A; section 2.3). If the instruction following the MOV to SS or POP to SS instruction is an instruction like SYSCALL, SYSENTER, INT 3, etc. that transfers control to the operating system at CPL < 3, the debug exception is delivered after the transfer to CPL < 3 is complete. OS kernels may not expect this order of events and may therefore experience unexpected behavior when it occurs (bsc#1090368).
• CVE-2018-8781: The udl_fb_mmap function in drivers/gpu/drm/udl/udl_fb.c had an integer-overflow vulnerability allowing local users with access to the udldrmfb driver to obtain full read and write permissions on kernel physical pages, resulting in a code execution in kernel space (bsc#1090646).
• bsc#1083125: Fixed kgraft: small race in reversion code
• CVE-2018-1087: kernel KVM was vulnerable to a flaw in the way the Linux kernel's KVM hypervisor handled exceptions delivered after a stack switch operation via Mov SS or Pop SS instructions. During the stack switch operation, the processor did not deliver interrupts and exceptions, rather they are delivered once the first instruction after the stack switch is executed. An unprivileged KVM guest user could use this flaw to crash the guest or, potentially, escalate their privileges in the guest (bsc#1090869) before

This update for the Linux Kernel 4.4.114-92_67 fixes several issues.

The following security issues were fixed:

• CVE-2017-13166: An elevation of privilege vulnerability in the kernel v4l2 video driver was fixed. (bsc#1085447).
• CVE-2018-8897: A statement in the System Programming Guide of the Intel 64 and IA-32 Architectures Software Developer's Manual (SDM) was mishandled in the development of some or all operating-system kernels, resulting in unexpected behavior for #DB exceptions that are deferred by MOV SS or POP SS, as demonstrated by (for example) privilege escalation in Windows, macOS, some Xen configurations, or FreeBSD, or a Linux kernel crash. The MOV to SS and POP SS instructions inhibit interrupts (including NMIs), data breakpoints, and single step trap exceptions until the instruction boundary following the next instruction (SDM Vol. 3A; section 6.8.3). (The inhibited data breakpoints are those on memory accessed by the MOV to SS or POP to SS instruction itself.) Note that debug exceptions are not inhibited by the interrupt enable (EFLAGS.IF) system flag (SDM Vol. 3A; section 2.3). If the instruction following the MOV to SS or POP to SS instruction is an instruction like SYSCALL, SYSENTER, INT 3, etc. that transfers control to the operating system at CPL < 3, the debug exception is delivered after the transfer to CPL < 3 is complete. OS kernels may not expect this order of events and may therefore experience unexpected behavior when it occurs (bsc#1090368).
• CVE-2018-8781: The udl_fb_mmap function in drivers/gpu/drm/udl/udl_fb.c had an integer-overflow vulnerability allowing local users with access to the udldrmfb driver to obtain full read and write permissions on kernel physical pages, resulting in a code execution in kernel space (bsc#1090646).
• bsc#1083125: Fixed kgraft: small race in reversion code
• CVE-2018-1087: kernel KVM was vulnerable to a flaw in the way the Linux kernel's KVM hypervisor handled exceptions delivered after a stack switch operation via Mov SS or Pop SS instructions. During the stack switch operation, the processor did not deliver interrupts and exceptions, rather they are delivered once the first instruction after the stack switch is executed. An unprivileged KVM guest user could use this flaw to crash the guest or, potentially, escalate their privileges in the guest (bsc#1090869) before

This update for the Linux Kernel 3.12.61-52_106 fixes several issues.

The following security issues were fixed:

• CVE-2017-13166: An elevation of privilege vulnerability in the kernel v4l2 video driver was fixed. (bsc#1085447).
• CVE-2018-8897: A statement in the System Programming Guide of the Intel 64 and IA-32 Architectures Software Developer's Manual (SDM) was mishandled in the development of some or all operating-system kernels, resulting in unexpected behavior for #DB exceptions that are deferred by MOV SS or POP SS, as demonstrated by (for example) privilege escalation in Windows, macOS, some Xen configurations, or FreeBSD, or a Linux kernel crash. The MOV to SS and POP SS instructions inhibit interrupts (including NMIs), data breakpoints, and single step trap exceptions until the instruction boundary following the next instruction (SDM Vol. 3A; section 6.8.3). (The inhibited data breakpoints are those on memory accessed by the MOV to SS or POP to SS instruction itself.) Note that debug exceptions are not inhibited by the interrupt enable (EFLAGS.IF) system flag (SDM Vol. 3A; section 2.3). If the instruction following the MOV to SS or POP to SS instruction is an instruction like SYSCALL, SYSENTER, INT 3, etc. that transfers control to the operating system at CPL < 3, the debug exception is delivered after the transfer to CPL < 3 is complete. OS kernels may not expect this order of events and may therefore experience unexpected behavior when it occurs (bsc#1090368).
• CVE-2018-8781: The udl_fb_mmap function in drivers/gpu/drm/udl/udl_fb.c had an integer-overflow vulnerability allowing local users with access to the udldrmfb driver to obtain full read and write permissions on kernel physical pages, resulting in a code execution in kernel space (bsc#1090646).
• bsc#1083125: Fixed kgraft: small race in reversion code

This update for the Linux Kernel 3.12.74-60_64_85 fixes several issues.

The following security issues were fixed:

• CVE-2018-8897: A statement in the System Programming Guide of the Intel 64 and IA-32 Architectures Software Developer's Manual (SDM) was mishandled in the development of some or all operating-system kernels, resulting in unexpected behavior for #DB exceptions that are deferred by MOV SS or POP SS, as demonstrated by (for example) privilege escalation in Windows, macOS, some Xen configurations, or FreeBSD, or a Linux kernel crash. The MOV to SS and POP SS instructions inhibit interrupts (including NMIs), data breakpoints, and single step trap exceptions until the instruction boundary following the next instruction (SDM Vol. 3A; section 6.8.3). (The inhibited data breakpoints are those on memory accessed by the MOV to SS or POP to SS instruction itself.) Note that debug exceptions are not inhibited by the interrupt enable (EFLAGS.IF) system flag (SDM Vol. 3A; section 2.3). If the instruction following the MOV to SS or POP to SS instruction is an instruction like SYSCALL, SYSENTER, INT 3, etc. that transfers control to the operating system at CPL < 3, the debug exception is delivered after the transfer to CPL < 3 is complete. OS kernels may not expect this order of events and may therefore experience unexpected behavior when it occurs (bsc#1090368).
• CVE-2018-8781: The udl_fb_mmap function in drivers/gpu/drm/udl/udl_fb.c had an integer-overflow vulnerability allowing local users with access to the udldrmfb driver to obtain full read and write permissions on kernel physical pages, resulting in a code execution in kernel space (bsc#1090646).
• bsc#1083125: Fixed kgraft: small race in reversion code

This update for the Linux Kernel 3.12.74-60_64_48 fixes several issues.

The following security issues were fixed:

• CVE-2017-13166: An elevation of privilege vulnerability in the kernel v4l2 video driver was fixed. (bsc#1085447).
• CVE-2018-8897: A statement in the System Programming Guide of the Intel 64 and IA-32 Architectures Software Developer's Manual (SDM) was mishandled in the development of some or all operating-system kernels, resulting in unexpected behavior for #DB exceptions that are deferred by MOV SS or POP SS, as demonstrated by (for example) privilege escalation in Windows, macOS, some Xen configurations, or FreeBSD, or a Linux kernel crash. The MOV to SS and POP SS instructions inhibit interrupts (including NMIs), data breakpoints, and single step trap exceptions until the instruction boundary following the next instruction (SDM Vol. 3A; section 6.8.3). (The inhibited data breakpoints are those on memory accessed by the MOV to SS or POP to SS instruction itself.) Note that debug exceptions are not inhibited by the interrupt enable (EFLAGS.IF) system flag (SDM Vol. 3A; section 2.3). If the instruction following the MOV to SS or POP to SS instruction is an instruction like SYSCALL, SYSENTER, INT 3, etc. that transfers control to the operating system at CPL < 3, the debug exception is delivered after the transfer to CPL < 3 is complete. OS kernels may not expect this order of events and may therefore experience unexpected behavior when it occurs (bsc#1090368).
• CVE-2018-8781: The udl_fb_mmap function in drivers/gpu/drm/udl/udl_fb.c had an integer-overflow vulnerability allowing local users with access to the udldrmfb driver to obtain full read and write permissions on kernel physical pages, resulting in a code execution in kernel space (bsc#1090646).
• bsc#1083125: Fixed kgraft: small race in reversion code

This update for the Linux Kernel 4.4.90-92_50 fixes several issues.

The following security issues were fixed:

• CVE-2017-13166: An elevation of privilege vulnerability in the kernel v4l2 video driver was fixed. (bsc#1085447).
• CVE-2018-8897: A statement in the System Programming Guide of the Intel 64 and IA-32 Architectures Software Developer's Manual (SDM) was mishandled in the development of some or all operating-system kernels, resulting in unexpected behavior for #DB exceptions that are deferred by MOV SS or POP SS, as demonstrated by (for example) privilege escalation in Windows, macOS, some Xen configurations, or FreeBSD, or a Linux kernel crash. The MOV to SS and POP SS instructions inhibit interrupts (including NMIs), data breakpoints, and single step trap exceptions until the instruction boundary following the next instruction (SDM Vol. 3A; section 6.8.3). (The inhibited data breakpoints are those on memory accessed by the MOV to SS or POP to SS instruction itself.) Note that debug exceptions are not inhibited by the interrupt enable (EFLAGS.IF) system flag (SDM Vol. 3A; section 2.3). If the instruction following the MOV to SS or POP to SS instruction is an instruction like SYSCALL, SYSENTER, INT 3, etc. that transfers control to the operating system at CPL < 3, the debug exception is delivered after the transfer to CPL < 3 is complete. OS kernels may not expect this order of events and may therefore experience unexpected behavior when it occurs (bsc#1090368).
• CVE-2018-8781: The udl_fb_mmap function in drivers/gpu/drm/udl/udl_fb.c had an integer-overflow vulnerability allowing local users with access to the udldrmfb driver to obtain full read and write permissions on kernel physical pages, resulting in a code execution in kernel space (bsc#1090646).
• bsc#1083125: Fixed kgraft: small race in reversion code
• CVE-2018-1087: kernel KVM was vulnerable to a flaw in the way the Linux kernel's KVM hypervisor handled exceptions delivered after a stack switch operation via Mov SS or Pop SS instructions. During the stack switch operation, the processor did not deliver interrupts and exceptions, rather they are delivered once the first instruction after the stack switch is executed. An unprivileged KVM guest user could use this flaw to crash the guest or, potentially, escalate their privileges in the guest (bsc#1090869) before

This update for the Linux Kernel 3.12.61-52_80 fixes several issues.

The following security issues were fixed:

• CVE-2017-13166: An elevation of privilege vulnerability in the kernel v4l2 video driver was fixed. (bsc#1085447).
• CVE-2018-8897: A statement in the System Programming Guide of the Intel 64 and IA-32 Architectures Software Developer's Manual (SDM) was mishandled in the development of some or all operating-system kernels, resulting in unexpected behavior for #DB exceptions that are deferred by MOV SS or POP SS, as demonstrated by (for example) privilege escalation in Windows, macOS, some Xen configurations, or FreeBSD, or a Linux kernel crash. The MOV to SS and POP SS instructions inhibit interrupts (including NMIs), data breakpoints, and single step trap exceptions until the instruction boundary following the next instruction (SDM Vol. 3A; section 6.8.3). (The inhibited data breakpoints are those on memory accessed by the MOV to SS or POP to SS instruction itself.) Note that debug exceptions are not inhibited by the interrupt enable (EFLAGS.IF) system flag (SDM Vol. 3A; section 2.3). If the instruction following the MOV to SS or POP to SS instruction is an instruction like SYSCALL, SYSENTER, INT 3, etc. that transfers control to the operating system at CPL < 3, the debug exception is delivered after the transfer to CPL < 3 is complete. OS kernels may not expect this order of events and may therefore experience unexpected behavior when it occurs (bsc#1090368).
• CVE-2018-8781: The udl_fb_mmap function in drivers/gpu/drm/udl/udl_fb.c had an integer-overflow vulnerability allowing local users with access to the udldrmfb driver to obtain full read and write permissions on kernel physical pages, resulting in a code execution in kernel space (bsc#1090646).
• bsc#1083125: Fixed kgraft: small race in reversion code

This update for the Linux Kernel 4.4.103-92_53 fixes several issues.

The following security issues were fixed:

• CVE-2017-13166: An elevation of privilege vulnerability in the kernel v4l2 video driver was fixed. (bsc#1085447).
• CVE-2018-8897: A statement in the System Programming Guide of the Intel 64 and IA-32 Architectures Software Developer's Manual (SDM) was mishandled in the development of some or all operating-system kernels, resulting in unexpected behavior for #DB exceptions that are deferred by MOV SS or POP SS, as demonstrated by (for example) privilege escalation in Windows, macOS, some Xen configurations, or FreeBSD, or a Linux kernel crash. The MOV to SS and POP SS instructions inhibit interrupts (including NMIs), data breakpoints, and single step trap exceptions until the instruction boundary following the next instruction (SDM Vol. 3A; section 6.8.3). (The inhibited data breakpoints are those on memory accessed by the MOV to SS or POP to SS instruction itself.) Note that debug exceptions are not inhibited by the interrupt enable (EFLAGS.IF) system flag (SDM Vol. 3A; section 2.3). If the instruction following the MOV to SS or POP to SS instruction is an instruction like SYSCALL, SYSENTER, INT 3, etc. that transfers control to the operating system at CPL < 3, the debug exception is delivered after the transfer to CPL < 3 is complete. OS kernels may not expect this order of events and may therefore experience unexpected behavior when it occurs (bsc#1090368).
• CVE-2018-8781: The udl_fb_mmap function in drivers/gpu/drm/udl/udl_fb.c had an integer-overflow vulnerability allowing local users with access to the udldrmfb driver to obtain full read and write permissions on kernel physical pages, resulting in a code execution in kernel space (bsc#1090646).
• bsc#1083125: Fixed kgraft: small race in reversion code
• CVE-2018-1087: kernel KVM was vulnerable to a flaw in the way the Linux kernel's KVM hypervisor handled exceptions delivered after a stack switch operation via Mov SS or Pop SS instructions. During the stack switch operation, the processor did not deliver interrupts and exceptions, rather they are delivered once the first instruction after the stack switch is executed. An unprivileged KVM guest user could use this flaw to crash the guest or, potentially, escalate their privileges in the guest (bsc#1090869) before

This update for the Linux Kernel 3.12.74-60_64_63 fixes several issues.

The following security issues were fixed:

• CVE-2017-13166: An elevation of privilege vulnerability in the kernel v4l2 video driver was fixed. (bsc#1085447).
• CVE-2018-8897: A statement in the System Programming Guide of the Intel 64 and IA-32 Architectures Software Developer's Manual (SDM) was mishandled in the development of some or all operating-system kernels, resulting in unexpected behavior for #DB exceptions that are deferred by MOV SS or POP SS, as demonstrated by (for example) privilege escalation in Windows, macOS, some Xen configurations, or FreeBSD, or a Linux kernel crash. The MOV to SS and POP SS instructions inhibit interrupts (including NMIs), data breakpoints, and single step trap exceptions until the instruction boundary following the next instruction (SDM Vol. 3A; section 6.8.3). (The inhibited data breakpoints are those on memory accessed by the MOV to SS or POP to SS instruction itself.) Note that debug exceptions are not inhibited by the interrupt enable (EFLAGS.IF) system flag (SDM Vol. 3A; section 2.3). If the instruction following the MOV to SS or POP to SS instruction is an instruction like SYSCALL, SYSENTER, INT 3, etc. that transfers control to the operating system at CPL < 3, the debug exception is delivered after the transfer to CPL < 3 is complete. OS kernels may not expect this order of events and may therefore experience unexpected behavior when it occurs (bsc#1090368).
• CVE-2018-8781: The udl_fb_mmap function in drivers/gpu/drm/udl/udl_fb.c had an integer-overflow vulnerability allowing local users with access to the udldrmfb driver to obtain full read and write permissions on kernel physical pages, resulting in a code execution in kernel space (bsc#1090646).
• bsc#1083125: Fixed kgraft: small race in reversion code

This update for the Linux Kernel 3.12.61-52_89 fixes several issues.

The following security issues were fixed:

• CVE-2017-13166: An elevation of privilege vulnerability in the kernel v4l2 video driver was fixed. (bsc#1085447).
• CVE-2018-8897: A statement in the System Programming Guide of the Intel 64 and IA-32 Architectures Software Developer's Manual (SDM) was mishandled in the development of some or all operating-system kernels, resulting in unexpected behavior for #DB exceptions that are deferred by MOV SS or POP SS, as demonstrated by (for example) privilege escalation in Windows, macOS, some Xen configurations, or FreeBSD, or a Linux kernel crash. The MOV to SS and POP SS instructions inhibit interrupts (including NMIs), data breakpoints, and single step trap exceptions until the instruction boundary following the next instruction (SDM Vol. 3A; section 6.8.3). (The inhibited data breakpoints are those on memory accessed by the MOV to SS or POP to SS instruction itself.) Note that debug exceptions are not inhibited by the interrupt enable (EFLAGS.IF) system flag (SDM Vol. 3A; section 2.3). If the instruction following the MOV to SS or POP to SS instruction is an instruction like SYSCALL, SYSENTER, INT 3, etc. that transfers control to the operating system at CPL < 3, the debug exception is delivered after the transfer to CPL < 3 is complete. OS kernels may not expect this order of events and may therefore experience unexpected behavior when it occurs (bsc#1090368).
• CVE-2018-8781: The udl_fb_mmap function in drivers/gpu/drm/udl/udl_fb.c had an integer-overflow vulnerability allowing local users with access to the udldrmfb driver to obtain full read and write permissions on kernel physical pages, resulting in a code execution in kernel space (bsc#1090646).
• bsc#1083125: Fixed kgraft: small race in reversion code

This update for the Linux Kernel 3.12.74-60_64_40 fixes several issues.

The following security issues were fixed:

• CVE-2017-13166: An elevation of privilege vulnerability in the kernel v4l2 video driver was fixed. (bsc#1085447).
• CVE-2018-8897: A statement in the System Programming Guide of the Intel 64 and IA-32 Architectures Software Developer's Manual (SDM) was mishandled in the development of some or all operating-system kernels, resulting in unexpected behavior for #DB exceptions that are deferred by MOV SS or POP SS, as demonstrated by (for example) privilege escalation in Windows, macOS, some Xen configurations, or FreeBSD, or a Linux kernel crash. The MOV to SS and POP SS instructions inhibit interrupts (including NMIs), data breakpoints, and single step trap exceptions until the instruction boundary following the next instruction (SDM Vol. 3A; section 6.8.3). (The inhibited data breakpoints are those on memory accessed by the MOV to SS or POP to SS instruction itself.) Note that debug exceptions are not inhibited by the interrupt enable (EFLAGS.IF) system flag (SDM Vol. 3A; section 2.3). If the instruction following the MOV to SS or POP to SS instruction is an instruction like SYSCALL, SYSENTER, INT 3, etc. that transfers control to the operating system at CPL < 3, the debug exception is delivered after the transfer to CPL < 3 is complete. OS kernels may not expect this order of events and may therefore experience unexpected behavior when it occurs (bsc#1090368).
• CVE-2018-8781: The udl_fb_mmap function in drivers/gpu/drm/udl/udl_fb.c had an integer-overflow vulnerability allowing local users with access to the udldrmfb driver to obtain full read and write permissions on kernel physical pages, resulting in a code execution in kernel space (bsc#1090646).
• bsc#1083125: Fixed kgraft: small race in reversion code

This update for the Linux Kernel 4.4.59-92_20 fixes several issues.

The following security issues were fixed:

• CVE-2017-13166: An elevation of privilege vulnerability in the kernel v4l2 video driver was fixed. (bsc#1085447).
• CVE-2018-8897: A statement in the System Programming Guide of the Intel 64 and IA-32 Architectures Software Developer's Manual (SDM) was mishandled in the development of some or all operating-system kernels, resulting in unexpected behavior for #DB exceptions that are deferred by MOV SS or POP SS, as demonstrated by (for example) privilege escalation in Windows, macOS, some Xen configurations, or FreeBSD, or a Linux kernel crash. The MOV to SS and POP SS instructions inhibit interrupts (including NMIs), data breakpoints, and single step trap exceptions until the instruction boundary following the next instruction (SDM Vol. 3A; section 6.8.3). (The inhibited data breakpoints are those on memory accessed by the MOV to SS or POP to SS instruction itself.) Note that debug exceptions are not inhibited by the interrupt enable (EFLAGS.IF) system flag (SDM Vol. 3A; section 2.3). If the instruction following the MOV to SS or POP to SS instruction is an instruction like SYSCALL, SYSENTER, INT 3, etc. that transfers control to the operating system at CPL < 3, the debug exception is delivered after the transfer to CPL < 3 is complete. OS kernels may not expect this order of events and may therefore experience unexpected behavior when it occurs (bsc#1090368).
• CVE-2018-8781: The udl_fb_mmap function in drivers/gpu/drm/udl/udl_fb.c had an integer-overflow vulnerability allowing local users with access to the udldrmfb driver to obtain full read and write permissions on kernel physical pages, resulting in a code execution in kernel space (bsc#1090646).
• bsc#1083125: Fixed kgraft: small race in reversion code
• CVE-2018-1087: kernel KVM was vulnerable to a flaw in the way the Linux kernel's KVM hypervisor handled exceptions delivered after a stack switch operation via Mov SS or Pop SS instructions. During the stack switch operation, the processor did not deliver interrupts and exceptions, rather they are delivered once the first instruction after the stack switch is executed. An unprivileged KVM guest user could use this flaw to crash the guest or, potentially, escalate their privileges in the guest (bsc#1090869) before

This update for the Linux Kernel 4.4.120-92_70 fixes several issues.

The following security issues were fixed:

• CVE-2018-8897: A statement in the System Programming Guide of the Intel 64 and IA-32 Architectures Software Developer's Manual (SDM) was mishandled in the development of some or all operating-system kernels, resulting in unexpected behavior for #DB exceptions that are deferred by MOV SS or POP SS, as demonstrated by (for example) privilege escalation in Windows, macOS, some Xen configurations, or FreeBSD, or a Linux kernel crash. The MOV to SS and POP SS instructions inhibit interrupts (including NMIs), data breakpoints, and single step trap exceptions until the instruction boundary following the next instruction (SDM Vol. 3A; section 6.8.3). (The inhibited data breakpoints are those on memory accessed by the MOV to SS or POP to SS instruction itself.) Note that debug exceptions are not inhibited by the interrupt enable (EFLAGS.IF) system flag (SDM Vol. 3A; section 2.3). If the instruction following the MOV to SS or POP to SS instruction is an instruction like SYSCALL, SYSENTER, INT 3, etc. that transfers control to the operating system at CPL < 3, the debug exception is delivered after the transfer to CPL < 3 is complete. OS kernels may not expect this order of events and may therefore experience unexpected behavior when it occurs (bsc#1090368).
• CVE-2018-8781: The udl_fb_mmap function in drivers/gpu/drm/udl/udl_fb.c had an integer-overflow vulnerability allowing local users with access to the udldrmfb driver to obtain full read and write permissions on kernel physical pages, resulting in a code execution in kernel space (bsc#1090646).
• bsc#1083125: Fixed kgraft: small race in reversion code
• CVE-2018-1087: kernel KVM was vulnerable to a flaw in the way the Linux kernel's KVM hypervisor handled exceptions delivered after a stack switch operation via Mov SS or Pop SS instructions. During the stack switch operation, the processor did not deliver interrupts and exceptions, rather they are delivered once the first instruction after the stack switch is executed. An unprivileged KVM guest user could use this flaw to crash the guest or, potentially, escalate their privileges in the guest (bsc#1090869) before

This update for the Linux Kernel 4.4.74-92_32 fixes several issues.

The following security issues were fixed:

• CVE-2017-13166: An elevation of privilege vulnerability in the kernel v4l2 video driver was fixed. (bsc#1085447).
• CVE-2018-8897: A statement in the System Programming Guide of the Intel 64 and IA-32 Architectures Software Developer's Manual (SDM) was mishandled in the development of some or all operating-system kernels, resulting in unexpected behavior for #DB exceptions that are deferred by MOV SS or POP SS, as demonstrated by (for example) privilege escalation in Windows, macOS, some Xen configurations, or FreeBSD, or a Linux kernel crash. The MOV to SS and POP SS instructions inhibit interrupts (including NMIs), data breakpoints, and single step trap exceptions until the instruction boundary following the next instruction (SDM Vol. 3A; section 6.8.3). (The inhibited data breakpoints are those on memory accessed by the MOV to SS or POP to SS instruction itself.) Note that debug exceptions are not inhibited by the interrupt enable (EFLAGS.IF) system flag (SDM Vol. 3A; section 2.3). If the instruction following the MOV to SS or POP to SS instruction is an instruction like SYSCALL, SYSENTER, INT 3, etc. that transfers control to the operating system at CPL < 3, the debug exception is delivered after the transfer to CPL < 3 is complete. OS kernels may not expect this order of events and may therefore experience unexpected behavior when it occurs (bsc#1090368).
• CVE-2018-8781: The udl_fb_mmap function in drivers/gpu/drm/udl/udl_fb.c had an integer-overflow vulnerability allowing local users with access to the udldrmfb driver to obtain full read and write permissions on kernel physical pages, resulting in a code execution in kernel space (bsc#1090646).
• bsc#1083125: Fixed kgraft: small race in reversion code
• CVE-2018-1087: kernel KVM was vulnerable to a flaw in the way the Linux kernel's KVM hypervisor handled exceptions delivered after a stack switch operation via Mov SS or Pop SS instructions. During the stack switch operation, the processor did not deliver interrupts and exceptions, rather they are delivered once the first instruction after the stack switch is executed. An unprivileged KVM guest user could use this flaw to crash the guest or, potentially, escalate their privileges in the guest (bsc#1090869) before

This update for the Linux Kernel 3.12.61-52_122 fixes several issues.

The following security issues were fixed:

• CVE-2017-13166: An elevation of privilege vulnerability in the kernel v4l2 video driver was fixed. (bsc#1085447).
• CVE-2018-8897: A statement in the System Programming Guide of the Intel 64 and IA-32 Architectures Software Developer's Manual (SDM) was mishandled in the development of some or all operating-system kernels, resulting in unexpected behavior for #DB exceptions that are deferred by MOV SS or POP SS, as demonstrated by (for example) privilege escalation in Windows, macOS, some Xen configurations, or FreeBSD, or a Linux kernel crash. The MOV to SS and POP SS instructions inhibit interrupts (including NMIs), data breakpoints, and single step trap exceptions until the instruction boundary following the next instruction (SDM Vol. 3A; section 6.8.3). (The inhibited data breakpoints are those on memory accessed by the MOV to SS or POP to SS instruction itself.) Note that debug exceptions are not inhibited by the interrupt enable (EFLAGS.IF) system flag (SDM Vol. 3A; section 2.3). If the instruction following the MOV to SS or POP to SS instruction is an instruction like SYSCALL, SYSENTER, INT 3, etc. that transfers control to the operating system at CPL < 3, the debug exception is delivered after the transfer to CPL < 3 is complete. OS kernels may not expect this order of events and may therefore experience unexpected behavior when it occurs (bsc#1090368).
• CVE-2018-8781: The udl_fb_mmap function in drivers/gpu/drm/udl/udl_fb.c had an integer-overflow vulnerability allowing local users with access to the udldrmfb driver to obtain full read and write permissions on kernel physical pages, resulting in a code execution in kernel space (bsc#1090646).
• bsc#1083125: Fixed kgraft: small race in reversion code

This update for the Linux Kernel 3.12.74-60_64_82 fixes several issues.

The following security issues were fixed:

• CVE-2017-13166: An elevation of privilege vulnerability in the kernel v4l2 video driver was fixed. (bsc#1085447).
• CVE-2018-8897: A statement in the System Programming Guide of the Intel 64 and IA-32 Architectures Software Developer's Manual (SDM) was mishandled in the development of some or all operating-system kernels, resulting in unexpected behavior for #DB exceptions that are deferred by MOV SS or POP SS, as demonstrated by (for example) privilege escalation in Windows, macOS, some Xen configurations, or FreeBSD, or a Linux kernel crash. The MOV to SS and POP SS instructions inhibit interrupts (including NMIs), data breakpoints, and single step trap exceptions until the instruction boundary following the next instruction (SDM Vol. 3A; section 6.8.3). (The inhibited data breakpoints are those on memory accessed by the MOV to SS or POP to SS instruction itself.) Note that debug exceptions are not inhibited by the interrupt enable (EFLAGS.IF) system flag (SDM Vol. 3A; section 2.3). If the instruction following the MOV to SS or POP to SS instruction is an instruction like SYSCALL, SYSENTER, INT 3, etc. that transfers control to the operating system at CPL < 3, the debug exception is delivered after the transfer to CPL < 3 is complete. OS kernels may not expect this order of events and may therefore experience unexpected behavior when it occurs (bsc#1090368).
• CVE-2018-8781: The udl_fb_mmap function in drivers/gpu/drm/udl/udl_fb.c had an integer-overflow vulnerability allowing local users with access to the udldrmfb driver to obtain full read and write permissions on kernel physical pages, resulting in a code execution in kernel space (bsc#1090646).
• bsc#1083125: Fixed kgraft: small race in reversion code

This update for the Linux Kernel 3.12.61-52_83 fixes several issues.

The following security issues were fixed:

• CVE-2017-13166: An elevation of privilege vulnerability in the kernel v4l2 video driver was fixed. (bsc#1085447).
• CVE-2018-8897: A statement in the System Programming Guide of the Intel 64 and IA-32 Architectures Software Developer's Manual (SDM) was mishandled in the development of some or all operating-system kernels, resulting in unexpected behavior for #DB exceptions that are deferred by MOV SS or POP SS, as demonstrated by (for example) privilege escalation in Windows, macOS, some Xen configurations, or FreeBSD, or a Linux kernel crash. The MOV to SS and POP SS instructions inhibit interrupts (including NMIs), data breakpoints, and single step trap exceptions until the instruction boundary following the next instruction (SDM Vol. 3A; section 6.8.3). (The inhibited data breakpoints are those on memory accessed by the MOV to SS or POP to SS instruction itself.) Note that debug exceptions are not inhibited by the interrupt enable (EFLAGS.IF) system flag (SDM Vol. 3A; section 2.3). If the instruction following the MOV to SS or POP to SS instruction is an instruction like SYSCALL, SYSENTER, INT 3, etc. that transfers control to the operating system at CPL < 3, the debug exception is delivered after the transfer to CPL < 3 is complete. OS kernels may not expect this order of events and may therefore experience unexpected behavior when it occurs (bsc#1090368).
• CVE-2018-8781: The udl_fb_mmap function in drivers/gpu/drm/udl/udl_fb.c had an integer-overflow vulnerability allowing local users with access to the udldrmfb driver to obtain full read and write permissions on kernel physical pages, resulting in a code execution in kernel space (bsc#1090646).
• bsc#1083125: Fixed kgraft: small race in reversion code

This update for the Linux Kernel 4.4.114-92_64 fixes several issues.

The following security issues were fixed:

• CVE-2017-13166: An elevation of privilege vulnerability in the kernel v4l2 video driver was fixed. (bsc#1085447).
• CVE-2018-8897: A statement in the System Programming Guide of the Intel 64 and IA-32 Architectures Software Developer's Manual (SDM) was mishandled in the development of some or all operating-system kernels, resulting in unexpected behavior for #DB exceptions that are deferred by MOV SS or POP SS, as demonstrated by (for example) privilege escalation in Windows, macOS, some Xen configurations, or FreeBSD, or a Linux kernel crash. The MOV to SS and POP SS instructions inhibit interrupts (including NMIs), data breakpoints, and single step trap exceptions until the instruction boundary following the next instruction (SDM Vol. 3A; section 6.8.3). (The inhibited data breakpoints are those on memory accessed by the MOV to SS or POP to SS instruction itself.) Note that debug exceptions are not inhibited by the interrupt enable (EFLAGS.IF) system flag (SDM Vol. 3A; section 2.3). If the instruction following the MOV to SS or POP to SS instruction is an instruction like SYSCALL, SYSENTER, INT 3, etc. that transfers control to the operating system at CPL < 3, the debug exception is delivered after the transfer to CPL < 3 is complete. OS kernels may not expect this order of events and may therefore experience unexpected behavior when it occurs (bsc#1090368).
• CVE-2018-8781: The udl_fb_mmap function in drivers/gpu/drm/udl/udl_fb.c had an integer-overflow vulnerability allowing local users with access to the udldrmfb driver to obtain full read and write permissions on kernel physical pages, resulting in a code execution in kernel space (bsc#1090646).
• bsc#1083125: Fixed kgraft: small race in reversion code
• CVE-2018-1087: kernel KVM was vulnerable to a flaw in the way the Linux kernel's KVM hypervisor handled exceptions delivered after a stack switch operation via Mov SS or Pop SS instructions. During the stack switch operation, the processor did not deliver interrupts and exceptions, rather they are delivered once the first instruction after the stack switch is executed. An unprivileged KVM guest user could use this flaw to crash the guest or, potentially, escalate their privileges in the guest (bsc#1090869) before

This update for the Linux Kernel 3.12.74-60_64_51 fixes several issues.

The following security issues were fixed:

• CVE-2017-13166: An elevation of privilege vulnerability in the kernel v4l2 video driver was fixed. (bsc#1085447).
• CVE-2018-8897: A statement in the System Programming Guide of the Intel 64 and IA-32 Architectures Software Developer's Manual (SDM) was mishandled in the development of some or all operating-system kernels, resulting in unexpected behavior for #DB exceptions that are deferred by MOV SS or POP SS, as demonstrated by (for example) privilege escalation in Windows, macOS, some Xen configurations, or FreeBSD, or a Linux kernel crash. The MOV to SS and POP SS instructions inhibit interrupts (including NMIs), data breakpoints, and single step trap exceptions until the instruction boundary following the next instruction (SDM Vol. 3A; section 6.8.3). (The inhibited data breakpoints are those on memory accessed by the MOV to SS or POP to SS instruction itself.) Note that debug exceptions are not inhibited by the interrupt enable (EFLAGS.IF) system flag (SDM Vol. 3A; section 2.3). If the instruction following the MOV to SS or POP to SS instruction is an instruction like SYSCALL, SYSENTER, INT 3, etc. that transfers control to the operating system at CPL < 3, the debug exception is delivered after the transfer to CPL < 3 is complete. OS kernels may not expect this order of events and may therefore experience unexpected behavior when it occurs (bsc#1090368).
• CVE-2018-8781: The udl_fb_mmap function in drivers/gpu/drm/udl/udl_fb.c had an integer-overflow vulnerability allowing local users with access to the udldrmfb driver to obtain full read and write permissions on kernel physical pages, resulting in a code execution in kernel space (bsc#1090646).
• bsc#1083125: Fixed kgraft: small race in reversion code

This update for the Linux Kernel 3.12.74-60_64_54 fixes several issues.

The following security issues were fixed:

• CVE-2017-13166: An elevation of privilege vulnerability in the kernel v4l2 video driver was fixed. (bsc#1085447).
• CVE-2018-8897: A statement in the System Programming Guide of the Intel 64 and IA-32 Architectures Software Developer's Manual (SDM) was mishandled in the development of some or all operating-system kernels, resulting in unexpected behavior for #DB exceptions that are deferred by MOV SS or POP SS, as demonstrated by (for example) privilege escalation in Windows, macOS, some Xen configurations, or FreeBSD, or a Linux kernel crash. The MOV to SS and POP SS instructions inhibit interrupts (including NMIs), data breakpoints, and single step trap exceptions until the instruction boundary following the next instruction (SDM Vol. 3A; section 6.8.3). (The inhibited data breakpoints are those on memory accessed by the MOV to SS or POP to SS instruction itself.) Note that debug exceptions are not inhibited by the interrupt enable (EFLAGS.IF) system flag (SDM Vol. 3A; section 2.3). If the instruction following the MOV to SS or POP to SS instruction is an instruction like SYSCALL, SYSENTER, INT 3, etc. that transfers control to the operating system at CPL < 3, the debug exception is delivered after the transfer to CPL < 3 is complete. OS kernels may not expect this order of events and may therefore experience unexpected behavior when it occurs (bsc#1090368).
• CVE-2018-8781: The udl_fb_mmap function in drivers/gpu/drm/udl/udl_fb.c had an integer-overflow vulnerability allowing local users with access to the udldrmfb driver to obtain full read and write permissions on kernel physical pages, resulting in a code execution in kernel space (bsc#1090646).
• bsc#1083125: Fixed kgraft: small race in reversion code

This update for the Linux Kernel 3.12.61-52_111 fixes several issues.

The following security issues were fixed:

• CVE-2017-13166: An elevation of privilege vulnerability in the kernel v4l2 video driver was fixed. (bsc#1085447).
• CVE-2018-8897: A statement in the System Programming Guide of the Intel 64 and IA-32 Architectures Software Developer's Manual (SDM) was mishandled in the development of some or all operating-system kernels, resulting in unexpected behavior for #DB exceptions that are deferred by MOV SS or POP SS, as demonstrated by (for example) privilege escalation in Windows, macOS, some Xen configurations, or FreeBSD, or a Linux kernel crash. The MOV to SS and POP SS instructions inhibit interrupts (including NMIs), data breakpoints, and single step trap exceptions until the instruction boundary following the next instruction (SDM Vol. 3A; section 6.8.3). (The inhibited data breakpoints are those on memory accessed by the MOV to SS or POP to SS instruction itself.) Note that debug exceptions are not inhibited by the interrupt enable (EFLAGS.IF) system flag (SDM Vol. 3A; section 2.3). If the instruction following the MOV to SS or POP to SS instruction is an instruction like SYSCALL, SYSENTER, INT 3, etc. that transfers control to the operating system at CPL < 3, the debug exception is delivered after the transfer to CPL < 3 is complete. OS kernels may not expect this order of events and may therefore experience unexpected behavior when it occurs (bsc#1090368).
• CVE-2018-8781: The udl_fb_mmap function in drivers/gpu/drm/udl/udl_fb.c had an integer-overflow vulnerability allowing local users with access to the udldrmfb driver to obtain full read and write permissions on kernel physical pages, resulting in a code execution in kernel space (bsc#1090646).
• bsc#1083125: Fixed kgraft: small race in reversion code

This update for the Linux Kernel 4.4.74-92_35 fixes several issues.

The following security issues were fixed:

• CVE-2017-13166: An elevation of privilege vulnerability in the kernel v4l2 video driver was fixed. (bsc#1085447).
• CVE-2018-8897: A statement in the System Programming Guide of the Intel 64 and IA-32 Architectures Software Developer's Manual (SDM) was mishandled in the development of some or all operating-system kernels, resulting in unexpected behavior for #DB exceptions that are deferred by MOV SS or POP SS, as demonstrated by (for example) privilege escalation in Windows, macOS, some Xen configurations, or FreeBSD, or a Linux kernel crash. The MOV to SS and POP SS instructions inhibit interrupts (including NMIs), data breakpoints, and single step trap exceptions until the instruction boundary following the next instruction (SDM Vol. 3A; section 6.8.3). (The inhibited data breakpoints are those on memory accessed by the MOV to SS or POP to SS instruction itself.) Note that debug exceptions are not inhibited by the interrupt enable (EFLAGS.IF) system flag (SDM Vol. 3A; section 2.3). If the instruction following the MOV to SS or POP to SS instruction is an instruction like SYSCALL, SYSENTER, INT 3, etc. that transfers control to the operating system at CPL < 3, the debug exception is delivered after the transfer to CPL < 3 is complete. OS kernels may not expect this order of events and may therefore experience unexpected behavior when it occurs (bsc#1090368).
• CVE-2018-8781: The udl_fb_mmap function in drivers/gpu/drm/udl/udl_fb.c had an integer-overflow vulnerability allowing local users with access to the udldrmfb driver to obtain full read and write permissions on kernel physical pages, resulting in a code execution in kernel space (bsc#1090646).
• bsc#1083125: Fixed kgraft: small race in reversion code
• CVE-2018-1087: kernel KVM was vulnerable to a flaw in the way the Linux kernel's KVM hypervisor handled exceptions delivered after a stack switch operation via Mov SS or Pop SS instructions. During the stack switch operation, the processor did not deliver interrupts and exceptions, rather they are delivered once the first instruction after the stack switch is executed. An unprivileged KVM guest user could use this flaw to crash the guest or, potentially, escalate their privileges in the guest (bsc#1090869) before

This update for the Linux Kernel 3.12.61-52_77 fixes several issues.

The following security issues were fixed:

• CVE-2017-13166: An elevation of privilege vulnerability in the kernel v4l2 video driver was fixed. (bsc#1085447).
• CVE-2018-8897: A statement in the System Programming Guide of the Intel 64 and IA-32 Architectures Software Developer's Manual (SDM) was mishandled in the development of some or all operating-system kernels, resulting in unexpected behavior for #DB exceptions that are deferred by MOV SS or POP SS, as demonstrated by (for example) privilege escalation in Windows, macOS, some Xen configurations, or FreeBSD, or a Linux kernel crash. The MOV to SS and POP SS instructions inhibit interrupts (including NMIs), data breakpoints, and single step trap exceptions until the instruction boundary following the next instruction (SDM Vol. 3A; section 6.8.3). (The inhibited data breakpoints are those on memory accessed by the MOV to SS or POP to SS instruction itself.) Note that debug exceptions are not inhibited by the interrupt enable (EFLAGS.IF) system flag (SDM Vol. 3A; section 2.3). If the instruction following the MOV to SS or POP to SS instruction is an instruction like SYSCALL, SYSENTER, INT 3, etc. that transfers control to the operating system at CPL < 3, the debug exception is delivered after the transfer to CPL < 3 is complete. OS kernels may not expect this order of events and may therefore experience unexpected behavior when it occurs (bsc#1090368).
• CVE-2018-8781: The udl_fb_mmap function in drivers/gpu/drm/udl/udl_fb.c had an integer-overflow vulnerability allowing local users with access to the udldrmfb driver to obtain full read and write permissions on kernel physical pages, resulting in a code execution in kernel space (bsc#1090646).
• bsc#1083125: Fixed kgraft: small race in reversion code

This update for the Linux Kernel 4.4.59-92_24 fixes several issues.

The following security issues were fixed:

• CVE-2017-13166: An elevation of privilege vulnerability in the kernel v4l2 video driver was fixed. (bsc#1085447).
• CVE-2018-8897: A statement in the System Programming Guide of the Intel 64 and IA-32 Architectures Software Developer's Manual (SDM) was mishandled in the development of some or all operating-system kernels, resulting in unexpected behavior for #DB exceptions that are deferred by MOV SS or POP SS, as demonstrated by (for example) privilege escalation in Windows, macOS, some Xen configurations, or FreeBSD, or a Linux kernel crash. The MOV to SS and POP SS instructions inhibit interrupts (including NMIs), data breakpoints, and single step trap exceptions until the instruction boundary following the next instruction (SDM Vol. 3A; section 6.8.3). (The inhibited data breakpoints are those on memory accessed by the MOV to SS or POP to SS instruction itself.) Note that debug exceptions are not inhibited by the interrupt enable (EFLAGS.IF) system flag (SDM Vol. 3A; section 2.3). If the instruction following the MOV to SS or POP to SS instruction is an instruction like SYSCALL, SYSENTER, INT 3, etc. that transfers control to the operating system at CPL < 3, the debug exception is delivered after the transfer to CPL < 3 is complete. OS kernels may not expect this order of events and may therefore experience unexpected behavior when it occurs (bsc#1090368).
• CVE-2018-8781: The udl_fb_mmap function in drivers/gpu/drm/udl/udl_fb.c had an integer-overflow vulnerability allowing local users with access to the udldrmfb driver to obtain full read and write permissions on kernel physical pages, resulting in a code execution in kernel space (bsc#1090646).
• bsc#1083125: Fixed kgraft: small race in reversion code
• CVE-2018-1087: kernel KVM was vulnerable to a flaw in the way the Linux kernel's KVM hypervisor handled exceptions delivered after a stack switch operation via Mov SS or Pop SS instructions. During the stack switch operation, the processor did not deliver interrupts and exceptions, rather they are delivered once the first instruction after the stack switch is executed. An unprivileged KVM guest user could use this flaw to crash the guest or, potentially, escalate their privileges in the guest (bsc#1090869) before

This update for the Linux Kernel 3.12.74-60_64_66 fixes several issues.

The following security issues were fixed:

• CVE-2017-13166: An elevation of privilege vulnerability in the kernel v4l2 video driver was fixed. (bsc#1085447).
• CVE-2018-8897: A statement in the System Programming Guide of the Intel 64 and IA-32 Architectures Software Developer's Manual (SDM) was mishandled in the development of some or all operating-system kernels, resulting in unexpected behavior for #DB exceptions that are deferred by MOV SS or POP SS, as demonstrated by (for example) privilege escalation in Windows, macOS, some Xen configurations, or FreeBSD, or a Linux kernel crash. The MOV to SS and POP SS instructions inhibit interrupts (including NMIs), data breakpoints, and single step trap exceptions until the instruction boundary following the next instruction (SDM Vol. 3A; section 6.8.3). (The inhibited data breakpoints are those on memory accessed by the MOV to SS or POP to SS instruction itself.) Note that debug exceptions are not inhibited by the interrupt enable (EFLAGS.IF) system flag (SDM Vol. 3A; section 2.3). If the instruction following the MOV to SS or POP to SS instruction is an instruction like SYSCALL, SYSENTER, INT 3, etc. that transfers control to the operating system at CPL < 3, the debug exception is delivered after the transfer to CPL < 3 is complete. OS kernels may not expect this order of events and may therefore experience unexpected behavior when it occurs (bsc#1090368).
• CVE-2018-8781: The udl_fb_mmap function in drivers/gpu/drm/udl/udl_fb.c had an integer-overflow vulnerability allowing local users with access to the udldrmfb driver to obtain full read and write permissions on kernel physical pages, resulting in a code execution in kernel space (bsc#1090646).
• bsc#1083125: Fixed kgraft: small race in reversion code

This update for the Linux Kernel 3.12.61-52_101 fixes several issues.

The following security issues were fixed:

• CVE-2017-13166: An elevation of privilege vulnerability in the kernel v4l2 video driver was fixed. (bsc#1085447).
• CVE-2018-8897: A statement in the System Programming Guide of the Intel 64 and IA-32 Architectures Software Developer's Manual (SDM) was mishandled in the development of some or all operating-system kernels, resulting in unexpected behavior for #DB exceptions that are deferred by MOV SS or POP SS, as demonstrated by (for example) privilege escalation in Windows, macOS, some Xen configurations, or FreeBSD, or a Linux kernel crash. The MOV to SS and POP SS instructions inhibit interrupts (including NMIs), data breakpoints, and single step trap exceptions until the instruction boundary following the next instruction (SDM Vol. 3A; section 6.8.3). (The inhibited data breakpoints are those on memory accessed by the MOV to SS or POP to SS instruction itself.) Note that debug exceptions are not inhibited by the interrupt enable (EFLAGS.IF) system flag (SDM Vol. 3A; section 2.3). If the instruction following the MOV to SS or POP to SS instruction is an instruction like SYSCALL, SYSENTER, INT 3, etc. that transfers control to the operating system at CPL < 3, the debug exception is delivered after the transfer to CPL < 3 is complete. OS kernels may not expect this order of events and may therefore experience unexpected behavior when it occurs (bsc#1090368).
• CVE-2018-8781: The udl_fb_mmap function in drivers/gpu/drm/udl/udl_fb.c had an integer-overflow vulnerability allowing local users with access to the udldrmfb driver to obtain full read and write permissions on kernel physical pages, resulting in a code execution in kernel space (bsc#1090646).
• bsc#1083125: Fixed kgraft: small race in reversion code

This update for the Linux Kernel 3.12.61-52_125 fixes several issues.

The following security issues were fixed:

• CVE-2018-8897: A statement in the System Programming Guide of the Intel 64 and IA-32 Architectures Software Developer's Manual (SDM) was mishandled in the development of some or all operating-system kernels, resulting in unexpected behavior for #DB exceptions that are deferred by MOV SS or POP SS, as demonstrated by (for example) privilege escalation in Windows, macOS, some Xen configurations, or FreeBSD, or a Linux kernel crash. The MOV to SS and POP SS instructions inhibit interrupts (including NMIs), data breakpoints, and single step trap exceptions until the instruction boundary following the next instruction (SDM Vol. 3A; section 6.8.3). (The inhibited data breakpoints are those on memory accessed by the MOV to SS or POP to SS instruction itself.) Note that debug exceptions are not inhibited by the interrupt enable (EFLAGS.IF) system flag (SDM Vol. 3A; section 2.3). If the instruction following the MOV to SS or POP to SS instruction is an instruction like SYSCALL, SYSENTER, INT 3, etc. that transfers control to the operating system at CPL < 3, the debug exception is delivered after the transfer to CPL < 3 is complete. OS kernels may not expect this order of events and may therefore experience unexpected behavior when it occurs (bsc#1090368).
• CVE-2018-8781: The udl_fb_mmap function in drivers/gpu/drm/udl/udl_fb.c had an integer-overflow vulnerability allowing local users with access to the udldrmfb driver to obtain full read and write permissions on kernel physical pages, resulting in a code execution in kernel space (bsc#1090646).
• bsc#1083125: Fixed kgraft: small race in reversion code

This update for the Linux Kernel 3.12.61-52_86 fixes several issues.

The following security issues were fixed:

• CVE-2017-13166: An elevation of privilege vulnerability in the kernel v4l2 video driver was fixed. (bsc#1085447).
• CVE-2018-8897: A statement in the System Programming Guide of the Intel 64 and IA-32 Architectures Software Developer's Manual (SDM) was mishandled in the development of some or all operating-system kernels, resulting in unexpected behavior for #DB exceptions that are deferred by MOV SS or POP SS, as demonstrated by (for example) privilege escalation in Windows, macOS, some Xen configurations, or FreeBSD, or a Linux kernel crash. The MOV to SS and POP SS instructions inhibit interrupts (including NMIs), data breakpoints, and single step trap exceptions until the instruction boundary following the next instruction (SDM Vol. 3A; section 6.8.3). (The inhibited data breakpoints are those on memory accessed by the MOV to SS or POP to SS instruction itself.) Note that debug exceptions are not inhibited by the interrupt enable (EFLAGS.IF) system flag (SDM Vol. 3A; section 2.3). If the instruction following the MOV to SS or POP to SS instruction is an instruction like SYSCALL, SYSENTER, INT 3, etc. that transfers control to the operating system at CPL < 3, the debug exception is delivered after the transfer to CPL < 3 is complete. OS kernels may not expect this order of events and may therefore experience unexpected behavior when it occurs (bsc#1090368).
• CVE-2018-8781: The udl_fb_mmap function in drivers/gpu/drm/udl/udl_fb.c had an integer-overflow vulnerability allowing local users with access to the udldrmfb driver to obtain full read and write permissions on kernel physical pages, resulting in a code execution in kernel space (bsc#1090646).
• bsc#1083125: Fixed kgraft: small race in reversion code

This update for the Linux Kernel 3.12.74-60_64_57 fixes several issues.

The following security issues were fixed:

• CVE-2017-13166: An elevation of privilege vulnerability in the kernel v4l2 video driver was fixed. (bsc#1085447).
• CVE-2018-8897: A statement in the System Programming Guide of the Intel 64 and IA-32 Architectures Software Developer's Manual (SDM) was mishandled in the development of some or all operating-system kernels, resulting in unexpected behavior for #DB exceptions that are deferred by MOV SS or POP SS, as demonstrated by (for example) privilege escalation in Windows, macOS, some Xen configurations, or FreeBSD, or a Linux kernel crash. The MOV to SS and POP SS instructions inhibit interrupts (including NMIs), data breakpoints, and single step trap exceptions until the instruction boundary following the next instruction (SDM Vol. 3A; section 6.8.3). (The inhibited data breakpoints are those on memory accessed by the MOV to SS or POP to SS instruction itself.) Note that debug exceptions are not inhibited by the interrupt enable (EFLAGS.IF) system flag (SDM Vol. 3A; section 2.3). If the instruction following the MOV to SS or POP to SS instruction is an instruction like SYSCALL, SYSENTER, INT 3, etc. that transfers control to the operating system at CPL < 3, the debug exception is delivered after the transfer to CPL < 3 is complete. OS kernels may not expect this order of events and may therefore experience unexpected behavior when it occurs (bsc#1090368).
• CVE-2018-8781: The udl_fb_mmap function in drivers/gpu/drm/udl/udl_fb.c had an integer-overflow vulnerability allowing local users with access to the udldrmfb driver to obtain full read and write permissions on kernel physical pages, resulting in a code execution in kernel space (bsc#1090646).
• bsc#1083125: Fixed kgraft: small race in reversion code

This update for the Linux Kernel 3.12.61-52_119 fixes several issues.

The following security issues were fixed:

• CVE-2017-13166: An elevation of privilege vulnerability in the kernel v4l2 video driver was fixed. (bsc#1085447).
• CVE-2018-8897: A statement in the System Programming Guide of the Intel 64 and IA-32 Architectures Software Developer's Manual (SDM) was mishandled in the development of some or all operating-system kernels, resulting in unexpected behavior for #DB exceptions that are deferred by MOV SS or POP SS, as demonstrated by (for example) privilege escalation in Windows, macOS, some Xen configurations, or FreeBSD, or a Linux kernel crash. The MOV to SS and POP SS instructions inhibit interrupts (including NMIs), data breakpoints, and single step trap exceptions until the instruction boundary following the next instruction (SDM Vol. 3A; section 6.8.3). (The inhibited data breakpoints are those on memory accessed by the MOV to SS or POP to SS instruction itself.) Note that debug exceptions are not inhibited by the interrupt enable (EFLAGS.IF) system flag (SDM Vol. 3A; section 2.3). If the instruction following the MOV to SS or POP to SS instruction is an instruction like SYSCALL, SYSENTER, INT 3, etc. that transfers control to the operating system at CPL < 3, the debug exception is delivered after the transfer to CPL < 3 is complete. OS kernels may not expect this order of events and may therefore experience unexpected behavior when it occurs (bsc#1090368).
• CVE-2018-8781: The udl_fb_mmap function in drivers/gpu/drm/udl/udl_fb.c had an integer-overflow vulnerability allowing local users with access to the udldrmfb driver to obtain full read and write permissions on kernel physical pages, resulting in a code execution in kernel space (bsc#1090646).
• bsc#1083125: Fixed kgraft: small race in reversion code

This update for the Linux Kernel 4.4.74-92_38 fixes several issues.

The following security issues were fixed:

• CVE-2017-13166: An elevation of privilege vulnerability in the kernel v4l2 video driver was fixed. (bsc#1085447).
• CVE-2018-8897: A statement in the System Programming Guide of the Intel 64 and IA-32 Architectures Software Developer's Manual (SDM) was mishandled in the development of some or all operating-system kernels, resulting in unexpected behavior for #DB exceptions that are deferred by MOV SS or POP SS, as demonstrated by (for example) privilege escalation in Windows, macOS, some Xen configurations, or FreeBSD, or a Linux kernel crash. The MOV to SS and POP SS instructions inhibit interrupts (including NMIs), data breakpoints, and single step trap exceptions until the instruction boundary following the next instruction (SDM Vol. 3A; section 6.8.3). (The inhibited data breakpoints are those on memory accessed by the MOV to SS or POP to SS instruction itself.) Note that debug exceptions are not inhibited by the interrupt enable (EFLAGS.IF) system flag (SDM Vol. 3A; section 2.3). If the instruction following the MOV to SS or POP to SS instruction is an instruction like SYSCALL, SYSENTER, INT 3, etc. that transfers control to the operating system at CPL < 3, the debug exception is delivered after the transfer to CPL < 3 is complete. OS kernels may not expect this order of events and may therefore experience unexpected behavior when it occurs (bsc#1090368).
• CVE-2018-8781: The udl_fb_mmap function in drivers/gpu/drm/udl/udl_fb.c had an integer-overflow vulnerability allowing local users with access to the udldrmfb driver to obtain full read and write permissions on kernel physical pages, resulting in a code execution in kernel space (bsc#1090646).
• bsc#1083125: Fixed kgraft: small race in reversion code
• CVE-2018-1087: kernel KVM was vulnerable to a flaw in the way the Linux kernel's KVM hypervisor handled exceptions delivered after a stack switch operation via Mov SS or Pop SS instructions. During the stack switch operation, the processor did not deliver interrupts and exceptions, rather they are delivered once the first instruction after the stack switch is executed. An unprivileged KVM guest user could use this flaw to crash the guest or, potentially, escalate their privileges in the guest (bsc#1090869) before

This update for the Linux Kernel 3.12.74-60_64_60 fixes several issues.

The following security issues were fixed:

• CVE-2017-13166: An elevation of privilege vulnerability in the kernel v4l2 video driver was fixed. (bsc#1085447).
• CVE-2018-8897: A statement in the System Programming Guide of the Intel 64 and IA-32 Architectures Software Developer's Manual (SDM) was mishandled in the development of some or all operating-system kernels, resulting in unexpected behavior for #DB exceptions that are deferred by MOV SS or POP SS, as demonstrated by (for example) privilege escalation in Windows, macOS, some Xen configurations, or FreeBSD, or a Linux kernel crash. The MOV to SS and POP SS instructions inhibit interrupts (including NMIs), data breakpoints, and single step trap exceptions until the instruction boundary following the next instruction (SDM Vol. 3A; section 6.8.3). (The inhibited data breakpoints are those on memory accessed by the MOV to SS or POP to SS instruction itself.) Note that debug exceptions are not inhibited by the interrupt enable (EFLAGS.IF) system flag (SDM Vol. 3A; section 2.3). If the instruction following the MOV to SS or POP to SS instruction is an instruction like SYSCALL, SYSENTER, INT 3, etc. that transfers control to the operating system at CPL < 3, the debug exception is delivered after the transfer to CPL < 3 is complete. OS kernels may not expect this order of events and may therefore experience unexpected behavior when it occurs (bsc#1090368).
• CVE-2018-8781: The udl_fb_mmap function in drivers/gpu/drm/udl/udl_fb.c had an integer-overflow vulnerability allowing local users with access to the udldrmfb driver to obtain full read and write permissions on kernel physical pages, resulting in a code execution in kernel space (bsc#1090646).
• bsc#1083125: Fixed kgraft: small race in reversion code

This update for the Linux Kernel 4.4.90-92_45 fixes several issues.

The following security issues were fixed:

• CVE-2017-13166: An elevation of privilege vulnerability in the kernel v4l2 video driver was fixed. (bsc#1085447).
• CVE-2018-8897: A statement in the System Programming Guide of the Intel 64 and IA-32 Architectures Software Developer's Manual (SDM) was mishandled in the development of some or all operating-system kernels, resulting in unexpected behavior for #DB exceptions that are deferred by MOV SS or POP SS, as demonstrated by (for example) privilege escalation in Windows, macOS, some Xen configurations, or FreeBSD, or a Linux kernel crash. The MOV to SS and POP SS instructions inhibit interrupts (including NMIs), data breakpoints, and single step trap exceptions until the instruction boundary following the next instruction (SDM Vol. 3A; section 6.8.3). (The inhibited data breakpoints are those on memory accessed by the MOV to SS or POP to SS instruction itself.) Note that debug exceptions are not inhibited by the interrupt enable (EFLAGS.IF) system flag (SDM Vol. 3A; section 2.3). If the instruction following the MOV to SS or POP to SS instruction is an instruction like SYSCALL, SYSENTER, INT 3, etc. that transfers control to the operating system at CPL < 3, the debug exception is delivered after the transfer to CPL < 3 is complete. OS kernels may not expect this order of events and may therefore experience unexpected behavior when it occurs (bsc#1090368).
• CVE-2018-8781: The udl_fb_mmap function in drivers/gpu/drm/udl/udl_fb.c had an integer-overflow vulnerability allowing local users with access to the udldrmfb driver to obtain full read and write permissions on kernel physical pages, resulting in a code execution in kernel space (bsc#1090646).
• bsc#1083125: Fixed kgraft: small race in reversion code
• CVE-2018-1087: kernel KVM was vulnerable to a flaw in the way the Linux kernel's KVM hypervisor handled exceptions delivered after a stack switch operation via Mov SS or Pop SS instructions. During the stack switch operation, the processor did not deliver interrupts and exceptions, rather they are delivered once the first instruction after the stack switch is executed. An unprivileged KVM guest user could use this flaw to crash the guest or, potentially, escalate their privileges in the guest (bsc#1090869) before