CVE-2018-8897
A statement in the System Programming Guide of the Intel 64 and IA-32 Architectures Software...
CVE-2018-8897 is a high vulnerability (CVSS 7.8) in Debian Linux, published May 8, 2018. Public exploit code exists. EPSS puts the chance of exploitation in the next 30 days at 18.5%, the 97th percentile. Fixed in xen 4.10.1-r1.
A statement in the System Programming Guide of the Intel 64 and IA-32 Architectures Software Developer's Manual (SDM) was mishandled in the development of some or all operating-system kernels, resulting in unexpected behavior for #DB exceptions that are deferred by MOV SS or POP SS, as demonstrated by (for example) privilege escalation in Windows, macOS, some Xen configurations, or FreeBSD, or a Linux kernel crash. The MOV to SS and POP SS instructions inhibit interrupts (including NMIs), data breakpoints, and single step trap exceptions until the instruction boundary following the next instruction (SDM Vol. 3A; section 6.8.3). (The inhibited data breakpoints are those on memory accessed by the MOV to SS or POP to SS instruction itself.) Note that debug exceptions are not inhibited by the interrupt enable (EFLAGS.IF) system flag (SDM Vol. 3A; section 2.3). If the instruction following the MOV to SS or POP to SS instruction is an instruction like SYSCALL, SYSENTER, INT 3, etc. that transfers control to the operating system at CPL < 3, the debug exception is delivered after the transfer to CPL < 3 is complete. OS kernels may not expect this order of events and may therefore experience unexpected behavior when it occurs.
Attack profile
How easy it is to exploit
- Attack vector
- Local
- Complexity
- Low
- Privileges needed
- Low
- User interaction
- None
What an attacker can affect
- Confidentiality
- High
- Integrity
- High
- Availability
- High
Exploit likelihood
What each source reports
NVD Score used
7.8
A statement in the System Programming Guide of the Intel 64 and IA-32 Architectures Software Developer's Manual (SDM) was mishandled in the development of some or all operating-system kernels, resulting in unexpected behavior for #DB exceptions that are deferred by MOV SS or POP SS, as demonstrated by (for example) privilege escalation in Windows, macOS, some Xen configurations, or FreeBSD, or a Linux kernel crash. The MOV to SS and POP SS instructions inhibit interrupts (including NMIs), data breakpoints, and single step trap exceptions until the instruction boundary following the next instruction (SDM Vol. 3A; section 6.8.3). (The inhibited data breakpoints are those on memory accessed by the MOV to SS or POP to SS instruction itself.) Note that debug exceptions are not inhibited by the interrupt enable (EFLAGS.IF) system flag (SDM Vol. 3A; section 2.3). If the instruction following the MOV to SS or POP to SS instruction is an instruction like SYSCALL, SYSENTER, INT 3, etc. that transfers control to the operating system at CPL < 3, the debug exception is delivered after the transfer to CPL < 3 is complete. OS kernels may not expect this order of events and may therefore experience unexpected behavior when it occurs.
- Record
CVE-2018-8897- CVSS 3.0
- 7.8 High
CVSS:3.0/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H - CVSS 2.0
- 7.2 High
AV:L/AC:L/Au:N/C:C/I:C/A:C - Weakness
- CWE-362
- Updated
- 2026-11-02
CVE List No score
A statement in the System Programming Guide of the Intel 64 and IA-32 Architectures Software Developer's Manual (SDM) was mishandled in the development of some or all operating-system kernels, resulting in unexpected behavior for #DB exceptions that are deferred by MOV SS or POP SS, as demonstrated by (for example) privilege escalation in Windows, macOS, some Xen configurations, or FreeBSD, or a Linux kernel crash. The MOV to SS and POP SS instructions inhibit interrupts (including NMIs), data breakpoints, and single step trap exceptions until the instruction boundary following the next instruction (SDM Vol. 3A; section 6.8.3). (The inhibited data breakpoints are those on memory accessed by the MOV to SS or POP to SS instruction itself.) Note that debug exceptions are not inhibited by the interrupt enable (EFLAGS.IF) system flag (SDM Vol. 3A; section 2.3). If the instruction following the MOV to SS or POP to SS instruction is an instruction like SYSCALL, SYSENTER, INT 3, etc. that transfers control to the operating system at CPL < 3, the debug exception is delivered after the transfer to CPL < 3 is complete. OS kernels may not expect this order of events and may therefore experience unexpected behavior when it occurs.
- Record
CVE-2018-8897- Updated
- 2026-11-02
EUVDEUVD-2018-20505 No score
A statement in the System Programming Guide of the Intel 64 and IA-32 Architectures Software Developer's Manual (SDM) was mishandled in the development of some or all operating-system kernels, resulting in unexpected behavior for #DB exceptions that are deferred by MOV SS or POP SS, as demonstrated by (for example) privilege escalation in Windows, macOS, some Xen configurations, or FreeBSD, or a Linux kernel crash. The MOV to SS and POP SS instructions inhibit interrupts (including NMIs), data breakpoints, and single step trap exceptions until the instruction boundary following the next instruction (SDM Vol. 3A; section 6.8.3). (The inhibited data breakpoints are those on memory accessed by the MOV to SS or POP to SS instruction itself.) Note that debug exceptions are not inhibited by the interrupt enable (EFLAGS.IF) system flag (SDM Vol. 3A; section 2.3). If the instruction following the MOV to SS or POP to SS instruction is an instruction like SYSCALL, SYSENTER, INT 3, etc. that transfers control to the operating system at CPL < 3, the debug exception is delivered after the transfer to CPL < 3 is complete. OS kernels may not expect this order of events and may therefore experience unexpected behavior when it occurs.
- Record
EUVD-2018-20505- Updated
- 2026-11-03
GitHub AdvisoriesGHSA-j2cv-h77g-5p95
7.8
A statement in the System Programming Guide of the Intel 64 and IA-32 Architectures Software...
A statement in the System Programming Guide of the Intel 64 and IA-32 Architectures Software Developer's Manual (SDM) was mishandled in the development of some or all operating-system kernels, resulting in unexpected behavior for #DB exceptions that are deferred by MOV SS or POP SS, as demonstrated by (for example) privilege escalation in Windows, macOS, some Xen configurations, or FreeBSD, or a Linux kernel crash. The MOV to SS and POP SS instructions inhibit interrupts (including NMIs), data breakpoints, and single step trap exceptions until the instruction boundary following the next instruction (SDM Vol. 3A; section 6.8.3). (The inhibited data breakpoints are those on memory accessed by the MOV to SS or POP to SS instruction itself.) Note that debug exceptions are not inhibited by the interrupt enable (EFLAGS.IF) system flag (SDM Vol. 3A; section 2.3). If the instruction following the MOV to SS or POP to SS instruction is an instruction like SYSCALL, SYSENTER, INT 3, etc. that transfers control to the operating system at CPL < 3, the debug exception is delivered after the transfer to CPL < 3 is complete. OS kernels may not expect this order of events and may therefore experience unexpected behavior when it occurs.
- Record
GHSA-j2cv-h77g-5p95- CVSS 3.0
- 7.8 High
CVSS:3.0/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H - Weakness
- CWE-362
- Updated
- 2026-11-02
OSVALPINE-CVE-2018-8897
7.8
A statement in the System Programming Guide of the Intel 64 and IA-32 Architectures Software Developer's Manual (SDM) was mishandled in the development of some or all operating-system kernels, resulting in unexpected behavior for #DB exceptions that are deferred by MOV SS or POP SS, as demonstrated by (for example) privilege escalation in Windows, macOS, some Xen configurations, or FreeBSD, or a Linux kernel crash. The MOV to SS and POP SS instructions inhibit interrupts (including NMIs), data breakpoints, and single step trap exceptions until the instruction boundary following the next instruction (SDM Vol. 3A; section 6.8.3). (The inhibited data breakpoints are those on memory accessed by the MOV to SS or POP to SS instruction itself.) Note that debug exceptions are not inhibited by the interrupt enable (EFLAGS.IF) system flag (SDM Vol. 3A; section 2.3). If the instruction following the MOV to SS or POP to SS instruction is an instruction like SYSCALL, SYSENTER, INT 3, etc. that transfers control to the operating system at CPL < 3, the debug exception is delivered after the transfer to CPL < 3 is complete. OS kernels may not expect this order of events and may therefore experience unexpected behavior when it occurs.
- Record
ALPINE-CVE-2018-8897- CVSS 3.0
- 7.8 High
CVSS:3.0/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H - Updated
- 2026-11-02
OSV
7.8
A statement in the System Programming Guide of the Intel 64 and IA-32 Architectures Software Developer's Manual (SDM) was mishandled in the development of some or all operating-system kernels, resulting in unexpected behavior for #DB exceptions that are deferred by MOV SS or POP SS, as demonstrated by (for example) privilege escalation in Windows, macOS, some Xen configurations, or FreeBSD, or a Linux kernel crash. The MOV to SS and POP SS instructions inhibit interrupts (including NMIs), data breakpoints, and single step trap exceptions until the instruction boundary following the next instruction (SDM Vol. 3A; section 6.8.3). (The inhibited data breakpoints are those on memory accessed by the MOV to SS or POP to SS instruction itself.) Note that debug exceptions are not inhibited by the interrupt enable (EFLAGS.IF) system flag (SDM Vol. 3A; section 2.3). If the instruction following the MOV to SS or POP to SS instruction is an instruction like SYSCALL, SYSENTER, INT 3, etc. that transfers control to the operating system at CPL < 3, the debug exception is delivered after the transfer to CPL < 3 is complete. OS kernels may not expect this order of events and may therefore experience unexpected behavior when it occurs.
- Record
CVE-2018-8897- CVSS 3.0
- 7.8 High
CVSS:3.0/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H - Updated
- 2026-11-02
Show 43 moreShow less
OSVDEBIAN-CVE-2018-8897
7.8
A statement in the System Programming Guide of the Intel 64 and IA-32 Architectures Software Developer's Manual (SDM) was mishandled in the development of some or all operating-system kernels, resulting in unexpected behavior for #DB exceptions that are deferred by MOV SS or POP SS, as demonstrated by (for example) privilege escalation in Windows, macOS, some Xen configurations, or FreeBSD, or a Linux kernel crash. The MOV to SS and POP SS instructions inhibit interrupts (including NMIs), data breakpoints, and single step trap exceptions until the instruction boundary following the next instruction (SDM Vol. 3A; section 6.8.3). (The inhibited data breakpoints are those on memory accessed by the MOV to SS or POP to SS instruction itself.) Note that debug exceptions are not inhibited by the interrupt enable (EFLAGS.IF) system flag (SDM Vol. 3A; section 2.3). If the instruction following the MOV to SS or POP to SS instruction is an instruction like SYSCALL, SYSENTER, INT 3, etc. that transfers control to the operating system at CPL < 3, the debug exception is delivered after the transfer to CPL < 3 is complete. OS kernels may not expect this order of events and may therefore experience unexpected behavior when it occurs.
- Record
DEBIAN-CVE-2018-8897- CVSS 3.0
- 7.8 High
CVSS:3.0/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H - Updated
- 2026-11-02
OSVRHSA-2018:1318
8.1
Red Hat Security Advisory: kernel security, bug fix, and enhancement update
- Record
RHSA-2018:1318- CVSS 3.0
- 8.1 High
CVSS:3.0/AV:L/AC:H/PR:N/UI:N/S:C/C:H/I:H/A:H - Updated
- 2026-11-02
OSVRHSA-2018:1319
7.8
Red Hat Security Advisory: kernel security and bug fix update
- Record
RHSA-2018:1319- CVSS 3.0
- 7.8 High
CVSS:3.0/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H - Updated
- 2026-11-02
OSVRHSA-2018:1345
8.0
Red Hat Security Advisory: kernel security update
- Record
RHSA-2018:1345- CVSS 3.0
- 8.0 High
CVSS:3.0/AV:A/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H - Updated
- 2026-11-02
OSVRHSA-2018:1346
6.5
Red Hat Security Advisory: kernel security and bug fix update
- Record
RHSA-2018:1346- CVSS 3.0
- 6.5 Medium
CVSS:3.0/AV:L/AC:L/PR:L/UI:N/S:C/C:N/I:N/A:H - Updated
- 2026-11-02
OSVRHSA-2018:1347
8.0
Red Hat Security Advisory: kernel security update
- Record
RHSA-2018:1347- CVSS 3.0
- 8.0 High
CVSS:3.0/AV:A/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H - Updated
- 2026-11-02
OSVRHSA-2018:1348
8.0
Red Hat Security Advisory: kernel security update
- Record
RHSA-2018:1348- CVSS 3.0
- 8.0 High
CVSS:3.0/AV:A/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H - Updated
- 2026-11-02
OSVRHSA-2018:1349
6.5
Red Hat Security Advisory: kernel security and bug fix update
- Record
RHSA-2018:1349- CVSS 3.0
- 6.5 Medium
CVSS:3.0/AV:L/AC:L/PR:L/UI:N/S:C/C:N/I:N/A:H - Updated
- 2026-11-02
OSVRHSA-2018:1350
6.5
Red Hat Security Advisory: kernel security and bug fix update
- Record
RHSA-2018:1350- CVSS 3.0
- 6.5 Medium
CVSS:3.0/AV:L/AC:L/PR:L/UI:N/S:C/C:N/I:N/A:H - Updated
- 2026-11-02
OSVRHSA-2018:1351
6.5
Red Hat Security Advisory: kernel security and bug fix update
- Record
RHSA-2018:1351- CVSS 3.0
- 6.5 Medium
CVSS:3.0/AV:L/AC:L/PR:L/UI:N/S:C/C:N/I:N/A:H - Updated
- 2026-11-02
OSVRHSA-2018:1352
6.5
Red Hat Security Advisory: kernel security update
- Record
RHSA-2018:1352- CVSS 3.0
- 6.5 Medium
CVSS:3.0/AV:L/AC:L/PR:L/UI:N/S:C/C:N/I:N/A:H - Updated
- 2026-11-02
OSVRHSA-2018:1353
6.5
Red Hat Security Advisory: kernel security update
- Record
RHSA-2018:1353- CVSS 3.0
- 6.5 Medium
CVSS:3.0/AV:L/AC:L/PR:L/UI:N/S:C/C:N/I:N/A:H - Updated
- 2026-11-02
OSVRHSA-2018:1354
7.8
Red Hat Security Advisory: kernel-rt security update
- Record
RHSA-2018:1354- CVSS 3.0
- 7.8 High
CVSS:3.0/AV:L/AC:H/PR:L/UI:N/S:C/C:H/I:H/A:H - Updated
- 2026-11-02
OSVRHSA-2018:1355
8.1
Red Hat Security Advisory: kernel-rt security and bug fix update
- Record
RHSA-2018:1355- CVSS 3.0
- 8.1 High
CVSS:3.0/AV:L/AC:H/PR:N/UI:N/S:C/C:H/I:H/A:H - Updated
- 2026-11-02
OSVRHSA-2018:1524
8.3
Red Hat Security Advisory: redhat-virtualization-host bug fix and enhancement update
- Record
RHSA-2018:1524- CVSS 3.0
- 8.3 High
CVSS:3.0/AV:A/AC:H/PR:N/UI:N/S:C/C:H/I:H/A:H - Updated
- 2026-11-02
OSVRHSA-2018:1710
8.0
Red Hat Security Advisory: redhat-virtualization-host security update
- Record
RHSA-2018:1710- CVSS 3.0
- 8.0 High
CVSS:3.0/AV:A/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H - Updated
- 2026-11-02
OSVRHSA-2018:1711
8.0
Red Hat Security Advisory: rhev-hypervisor7 security update
- Record
RHSA-2018:1711- CVSS 3.0
- 8.0 High
CVSS:3.0/AV:A/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H - Updated
- 2026-11-02
OSVUBUNTU-CVE-2018-8897
7.8
A statement in the System Programming Guide of the Intel 64 and IA-32 Architectures Software Developer's Manual (SDM) was mishandled in the development of some or all operating-system kernels, resulting in unexpected behavior for #DB exceptions that are deferred by MOV SS or POP SS, as demonstrated by (for example) privilege escalation in Windows, macOS, some Xen configurations, or FreeBSD, or a Linux kernel crash. The MOV to SS and POP SS instructions inhibit interrupts (including NMIs), data breakpoints, and single step trap exceptions until the instruction boundary following the next instruction (SDM Vol. 3A; section 6.8.3). (The inhibited data breakpoints are those on memory accessed by the MOV to SS or POP to SS instruction itself.) Note that debug exceptions are not inhibited by the interrupt enable (EFLAGS.IF) system flag (SDM Vol. 3A; section 2.3). If the instruction following the MOV to SS or POP to SS instruction is an instruction like SYSCALL, SYSENTER, INT 3, etc. that transfers control to the operating system at CPL < 3, the debug exception is delivered after the transfer to CPL < 3 is complete. OS kernels may not expect this order of events and may therefore experience unexpected behavior when it occurs.
- Record
UBUNTU-CVE-2018-8897- CVSS 3.0
- 7.8 High
CVSS:3.0/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H - Updated
- 2026-11-02
OSVMGASA-2018-0249 No score
Updated kernel packages fix security vulnerabilities
This kernel update is based on the upstream 4.14.40 and fixes at least the following security issues:
On x86, MOV SS and POP SS behave strangely if they encounter a data breakpoint. If this occurs in a KVM guest, KVM incorrectly thinks that a #DB instruction was caused by the undocumented ICEBP instruction. This results in #DB being delivered to the guest kernel with an incorrect RIP on the stack. On most guest kernels, this will allow a guest user to DoS the guest kernel or even to escalate privilege to that of the guest kernel (CVE-2018-1087).
The ext4_iget function in fs/ext4/inode.c in the Linux kernel through 4.15.15 mishandles the case of a root directory with a zero i_links_count, which allows attackers to cause a denial of service (ext4_process_freed_data NULL pointer dereference and OOPS) via a crafted ext4 image (CVE-2018-1092).
The ext4_valid_block_bitmap function in fs/ext4/balloc.c in the Linux kernel through 4.15.15 allows attackers to cause a denial of service (out-of-bounds read and system crash) via a crafted ext4 image because balloc.c and ialloc.c do not validate bitmap block numbers (CVE-2018-1093).
The ext4_fill_super function in fs/ext4/super.c in the Linux kernel through 4.15.15 does not always initialize the crc32c checksum driver, which allows attackers to cause a denial of service (ext4_xattr_inode_hash NULL pointer dereference and system crash) via a crafted ext4 image (CVE-2018-1094).
The ext4_xattr_check_entries function in fs/ext4/xattr.c in the Linux kernel through 4.15.15 does not properly validate xattr sizes, which causes misinterpretation of a size as an error code, and consequently allows attackers to cause a denial of service (get_acl NULL pointer dereference and system crash) via a crafted ext4 image (CVE-2018-1095).
Predictable Random Number Generator Weakness (CVE-2018-1108).
A null pointer dereference in dccp_write_xmit() function in net/dccp/output.c in the Linux kernel before v4.16-rc7 allows a local user to cause a denial of service by a number of certain crafted system calls (CVE-2018-1130).
The Linux kernel does not properly handle debug exceptions delivered after a stack switch operation via mov SS or pop SS instructions. During the stack switch operation, the exceptions are deferred. As a result, a local user can cause the kernel to crash (CVE-2018-8897).
WireGuard has been updated to 0.0.20180420.
For other fixes in this update, see the referenced changelogs.
- Record
MGASA-2018-0249- Updated
- 2026-11-02
OSVMGASA-2018-0264 No score
Updated kernel-tmb packages fix security vulnerabilities
This kernel-tmb update is based on the upstream 4.14.44 and fixes at least the following security issues:
This update adds KPTI mitigation for Meltdown (CVE-2017-5754) on 32bit x86.
The netfilter subsystem in the Linux kernel through 4.15.7 mishandles the case of a rule blob that contains a jump but lacks a user-defined chain, which allows local users to cause a denial of service (NULL pointer dereference) by leveraging the CAP_NET_RAW or CAP_NET_ADMIN capability, related to arpt_do_table in net/ipv4/netfilter/arp_tables.c, ipt_do_table in net/ipv4/netfilter/ip_tables.c, and ip6t_do_table in net/ipv6/netfilter/ip6_tables.c (CVE-2018-1065).
A flaw was found in the Linux kernel implementation of 32 bit syscall interface for bridging allowing a privileged user to arbitrarily write to a limited range of kernel memory. This flaw can be exploited not only by a system's privileged user (a real "root" user), but also by an attacker who is a privileged user (a "root" user) in a user+network namespace (CVE-2018-1068).
On x86, MOV SS and POP SS behave strangely if they encounter a data breakpoint. If this occurs in a KVM guest, KVM incorrectly thinks that a #DB instruction was caused by the undocumented ICEBP instruction. This results in #DB being delivered to the guest kernel with an incorrect RIP on the stack. On most guest kernels, this will allow a guest user to DoS the guest kernel or even to escalate privilege to that of the guest kernel (CVE-2018-1087).
The ext4_iget function in fs/ext4/inode.c in the Linux kernel through 4.15.15 mishandles the case of a root directory with a zero i_links_count, which allows attackers to cause a denial of service (ext4_process_freed_data NULL pointer dereference and OOPS) via a crafted ext4 image (CVE-2018-1092).
The ext4_valid_block_bitmap function in fs/ext4/balloc.c in the Linux kernel through 4.15.15 allows attackers to cause a denial of service (out-of-bounds read and system crash) via a crafted ext4 image because balloc.c and ialloc.c do not validate bitmap block numbers (CVE-2018-1093).
The ext4_fill_super function in fs/ext4/super.c in the Linux kernel through 4.15.15 does not always initialize the crc32c checksum driver, which allows attackers to cause a denial of service (ext4_xattr_inode_hash NULL pointer dereference and system crash) via a crafted ext4 image (CVE-2018-1094).
The ext4_xattr_check_entries function in fs/ext4/xattr.c in the Linux kernel through 4.15.15 does not properly validate xattr sizes, which causes misinterpretation of a size as an error code, and consequently allows attackers to cause a denial of service (get_acl NULL pointer dereference and system crash) via a crafted ext4 image (CVE-2018-1095).
By mmap()ing a FUSE-backed file onto a process's memory containing command line arguments (or environment strings), an attacker can cause utilities from psutils or procps (such as ps, w) or any other program which makes a read() call to the /proc/<pid>/cmdline (or /proc/<pid>/environ) files to block indefinitely (denial of service) or for some controlled time (as a synchronization primitive for other attacks) (CVE-2018-1120).
A null pointer dereference in dccp_write_xmit() function in net/dccp/output.c in the Linux kernel before v4.16-rc7 allows a local user to cause a denial of service by a number of certain crafted system calls (CVE-2018-1130).
Speculative Store Bypass (SSB) – also known as Spectre Variant 4. Systems with microprocessors utilizing speculative execution and speculative execution of memory reads before the addresses of all prior memory writes are known may allow unauthorized disclosure of information to an attacker with local user access via a side-channel analysis (CVE-2018-3639). NOTE! This fix only apply to Amd hardware so far as Intel CPUs need a fixed microcode update in order for the fix to get activated. At the time of this release we dont yet know when Intel will release new microcode.
The Linux kernel does not properly handle debug…
- Record
MGASA-2018-0264- Updated
- 2026-11-02
OSVMGASA-2018-0265 No score
Updated kernel-linus packages fix security vulnerabilities
This kernel-linus update is based on the upstream 4.14.44 and fixes at least the following security issues:
The netfilter subsystem in the Linux kernel through 4.15.7 mishandles the case of a rule blob that contains a jump but lacks a user-defined chain, which allows local users to cause a denial of service (NULL pointer dereference) by leveraging the CAP_NET_RAW or CAP_NET_ADMIN capability, related to arpt_do_table in net/ipv4/netfilter/arp_tables.c, ipt_do_table in net/ipv4/netfilter/ip_tables.c, and ip6t_do_table in net/ipv6/netfilter/ip6_tables.c (CVE-2018-1065).
A flaw was found in the Linux kernel implementation of 32 bit syscall interface for bridging allowing a privileged user to arbitrarily write to a limited range of kernel memory. This flaw can be exploited not only by a system's privileged user (a real "root" user), but also by an attacker who is a privileged user (a "root" user) in a user+network namespace (CVE-2018-1068).
On x86, MOV SS and POP SS behave strangely if they encounter a data breakpoint. If this occurs in a KVM guest, KVM incorrectly thinks that a #DB instruction was caused by the undocumented ICEBP instruction. This results in #DB being delivered to the guest kernel with an incorrect RIP on the stack. On most guest kernels, this will allow a guest user to DoS the guest kernel or even to escalate privilege to that of the guest kernel (CVE-2018-1087).
The ext4_iget function in fs/ext4/inode.c in the Linux kernel through 4.15.15 mishandles the case of a root directory with a zero i_links_count, which allows attackers to cause a denial of service (ext4_process_freed_data NULL pointer dereference and OOPS) via a crafted ext4 image (CVE-2018-1092).
The ext4_valid_block_bitmap function in fs/ext4/balloc.c in the Linux kernel through 4.15.15 allows attackers to cause a denial of service (out-of-bounds read and system crash) via a crafted ext4 image because balloc.c and ialloc.c do not validate bitmap block numbers (CVE-2018-1093).
The ext4_fill_super function in fs/ext4/super.c in the Linux kernel through 4.15.15 does not always initialize the crc32c checksum driver, which allows attackers to cause a denial of service (ext4_xattr_inode_hash NULL pointer dereference and system crash) via a crafted ext4 image (CVE-2018-1094).
The ext4_xattr_check_entries function in fs/ext4/xattr.c in the Linux kernel through 4.15.15 does not properly validate xattr sizes, which causes misinterpretation of a size as an error code, and consequently allows attackers to cause a denial of service (get_acl NULL pointer dereference and system crash) via a crafted ext4 image (CVE-2018-1095).
Predictable Random Number Generator Weakness (CVE-2018-1108).
By mmap()ing a FUSE-backed file onto a process's memory containing command line arguments (or environment strings), an attacker can cause utilities from psutils or procps (such as ps, w) or any other program which makes a read() call to the /proc/<pid>/cmdline (or /proc/<pid>/environ) files to block indefinitely (denial of service) or for some controlled time (as a synchronization primitive for other attacks) (CVE-2018-1120).
A null pointer dereference in dccp_write_xmit() function in net/dccp/output.c in the Linux kernel before v4.16-rc7 allows a local user to cause a denial of service by a number of certain crafted system calls (CVE-2018-1130).
Speculative Store Bypass (SSB) – also known as Spectre Variant 4. Systems with microprocessors utilizing speculative execution and speculative execution of memory reads before the addresses of all prior memory writes are known may allow unauthorized disclosure of information to an attacker with local user access via a side-channel analysis (CVE-2018-3639). NOTE! This fix only apply to Amd hardware so far as Intel CPUs need a fixed microcode update in order for the fix to get activated. At the time of this release we dont yet know when Intel will release new microcode.
The Linux kernel does not properly handle debug exceptions…
- Record
MGASA-2018-0265- Updated
- 2026-11-02
OSVMGASA-2018-0324 No score
Updated kernel packages fixes security vulnerabilities
This kernel update is based on the upstream 4.14.56 and fixes at least the following security issues:
kernel KVM before versions kernel 4.16, kernel 4.16-rc7, kernel 4.17-rc1, kernel 4.17-rc2 and kernel 4.17-rc3 is vulnerable to a flaw in the way the Linux kernel's KVM hypervisor handled exceptions delivered after a stack switch operation via Mov SS or Pop SS instructions. During the stack switch operation, the processor did not deliver interrupts and exceptions, rather they are delivered once the first instruction after the stack switch is executed. An unprivileged KVM guest user could use this flaw to crash the guest or, potentially, escalate their privileges in the guest (CVE-2018-1087).
Linux kernel vhost since version 4.8 does not properly initialize memory in messages passed between virtual guests and the host operating system in the vhost/vhost.c:vhost_new_msg() function. This can allow local privileged users to read some kernel memory contents when reading from the /dev/vhost-net device file (CVE-2018-1118).
In some circumstances, some operating systems or hypervisors may not expect or properly handle an Intel architecture hardware debug exception. The error appears to be due to developer interpretation of existing documentation for certain Intel architecture interrupt/exception instructions, namely MOV SS and POP SS. An authenticated attacker may be able to read sensitive data in memory or control low-level operating system functions (CVE-2018-8897).
Linux kernel is vulnerable to a heap-based buffer overflow in the fs/ext4/xattr.c:ext4_xattr_set_entry() function. An attacker could exploit this by operating on a mounted crafted ext4 image (CVE-2018-10840).
A flaw was found in Linux kernel ext4 File System. A use-after-free in ext4_ext_remove_space() when mounting and operating a crafted ext4 image (CVE-2018-10876).
Linux kernel ext4 filesystem is vulnerable to an out-of-bound access in the ext4_ext_drop_refs() function when operating on a crafted ext4 filesystem image (CVE-2018-10877).
A flaw was found in Linux kernel ext4 filesystem. A local user can cause a use-after-free in ext4_xattr_set_entry function and so a denial of service or possibly unspecified other impact by when renaming a file in a crafted ext4 filesystem image (CVE-2018-10879).
A flaw was found in Linux kernel ext4 filesystem code. A stack-out-of-bounds write in ext4_update_inline_data() is possible when mounting and writing to a crafted ext4 image. An attacker could use this to cause a system crash and a denial of service (CVE-2018-10880).
A flaw was found in Linux kernel ext4 filesystem. A local user can cause an out-of-bound access in ext4_get_group_info function and so a denial of service and a system crash by mounting and operating on a crafted ext4 filesystem image (CVE-2018-10881).
A flaw was found in Linux kernel ext4 File System. An out-of-bound write when unmounting a crafted ext4 image in fs/jbd2/transaction.c. An attacker could use this to cause a denial of service (system crash) (CVE-2018-10882).
A flaw was found in Linux kernel ext4 File System. An out-of-bound write in jbd2_journal_dirty_metadata() that kernel cannot handle when mounting and operating a crafted ext4 image. An attacker could use this to cause a denial of service (system crash) (CVE-2018-10883).
In the Linux kernel 4.13 through 4.16.11, ext4_read_inline_data() in fs/ext4/inline.c performs a memcpy with an untrusted length value in certain circumstances involving a crafted filesystem that stores the system.data extended attribute value in a dedicated inode (CVE-2018-11412).
The inode_init_owner function in fs/inode.c in the Linux kernel through 4.17.4 allows local users to create files with an unintended group ownership, in a scenario where a directory is SGID to a certain group and is writable by a user who is not a member of that group. Here, the non-member can trigger creation of a plain file whose group ownership is that group. The intended behavior was…
- Record
MGASA-2018-0324- Updated
- 2026-11-02
OSVMGASA-2018-0340 No score
Updated kernel-tmb packages fix security vulnerabilities
This kernel-tmb update is based on the upstream 4.14.62 and fixes at least the following security issues:
kernel KVM before versions kernel 4.16, kernel 4.16-rc7, kernel 4.17-rc1, kernel 4.17-rc2 and kernel 4.17-rc3 is vulnerable to a flaw in the way the Linux kernel's KVM hypervisor handled exceptions delivered after a stack switch operation via Mov SS or Pop SS instructions. During the stack switch operation, the processor did not deliver interrupts and exceptions, rather they are delivered once the first instruction after the stack switch is executed. An unprivileged KVM guest user could use this flaw to crash the guest or, potentially, escalate their privileges in the guest (CVE-2018-1087).
Linux kernel vhost since version 4.8 does not properly initialize memory in messages passed between virtual guests and the host operating system in the vhost/vhost.c:vhost_new_msg() function. This can allow local privileged users to read some kernel memory contents when reading from the /dev/vhost-net device file (CVE-2018-1118).
Security researchers from FICORA have identified a remote denial of service attack against the Linux kernel caused by inefficient implementation of TCP segment reassembly, named "SegmentSmack". A remote attacker could consume a lot of CPU resources in the kernel networking stack with just a low bandwidth or single host attack by using lots of small TCP segments packets. Usually large botnets are needed for similar effect. The rate needed for this denial of service attack to be effective is several magnitudes lower than the usual packet processing capability of the machine, as the attack exploits worst case behaviour of existing algorithms (CVE-2018-5390). In the function sbusfb_ioctl_helper() in drivers/video/fbdev/sbuslib.c in the Linux kernel through 4.15, an integer signedness error allows arbitrary information leakage for the FBIOPUTCMAP_SPARC and FBIOGETCMAP_SPARC commands (CVE-2018-6412).
In some circumstances, some operating systems or hypervisors may not expect or properly handle an Intel architecture hardware debug exception. The error appears to be due to developer interpretation of existing documentation for certain Intel architecture interrupt/exception instructions, namely MOV SS and POP SS. An authenticated attacker may be able to read sensitive data in memory or control low-level operating system functions (CVE-2018-8897).
Linux kernel is vulnerable to a heap-based buffer overflow in the fs/ext4/xattr.c:ext4_xattr_set_entry() function. An attacker could exploit this by operating on a mounted crafted ext4 image (CVE-2018-10840).
The kvm functions that were used in the emulation of fxrstor, fxsave, sgdt and sidt were originally meant for task switching, and as such they did not check privilege levels. This allowed guest userspace to guest kernel write (CVE-2018-10853).
A flaw was found in Linux kernel ext4 File System. A use-after-free in ext4_ext_remove_space() when mounting and operating a crafted ext4 image (CVE-2018-10876).
Linux kernel ext4 filesystem is vulnerable to an out-of-bound access in the ext4_ext_drop_refs() function when operating on a crafted ext4 filesystem image (CVE-2018-10877).
A flaw was found in Linux kernel ext4 filesystem. A local user can cause a use-after-free in ext4_xattr_set_entry function and so a denial of service or possibly unspecified other impact by when renaming a file in a crafted ext4 filesystem image (CVE-2018-10879).
A flaw was found in Linux kernel ext4 filesystem code. A stack-out-of-bounds write in ext4_update_inline_data() is possible when mounting and writing to a crafted ext4 image. An attacker could use this to cause a system crash and a denial of service (CVE-2018-10880).
A flaw was found in Linux kernel ext4 filesystem. A local user can cause an out-of-bound access in ext4_get_group_info function and so a denial of service and a system crash by mounting and operating on a crafted ext4 filesystem image (CVE-2018-10881).
A flaw was…
- Record
MGASA-2018-0340- Updated
- 2026-11-02
OSVMGASA-2018-0341 No score
Updated kernel-linus packages fix security vulnerabilities
This kernel-linus update is based on the upstream 4.14.62 and fixes at least the following security issues:
kernel KVM before versions kernel 4.16, kernel 4.16-rc7, kernel 4.17-rc1, kernel 4.17-rc2 and kernel 4.17-rc3 is vulnerable to a flaw in the way the Linux kernel's KVM hypervisor handled exceptions delivered after a stack switch operation via Mov SS or Pop SS instructions. During the stack switch operation, the processor did not deliver interrupts and exceptions, rather they are delivered once the first instruction after the stack switch is executed. An unprivileged KVM guest user could use this flaw to crash the guest or, potentially, escalate their privileges in the guest (CVE-2018-1087).
Linux kernel vhost since version 4.8 does not properly initialize memory in messages passed between virtual guests and the host operating system in the vhost/vhost.c:vhost_new_msg() function. This can allow local privileged users to read some kernel memory contents when reading from the /dev/vhost-net device file (CVE-2018-1118).
Security researchers from FICORA have identified a remote denial of service attack against the Linux kernel caused by inefficient implementation of TCP segment reassembly, named "SegmentSmack". A remote attacker could consume a lot of CPU resources in the kernel networking stack with just a low bandwidth or single host attack by using lots of small TCP segments packets. Usually large botnets are needed for similar effect. The rate needed for this denial of service attack to be effective is several magnitudes lower than the usual packet processing capability of the machine, as the attack exploits worst case behaviour of existing algorithms (CVE-2018-5390). In the function sbusfb_ioctl_helper() in drivers/video/fbdev/sbuslib.c in the Linux kernel through 4.15, an integer signedness error allows arbitrary information leakage for the FBIOPUTCMAP_SPARC and FBIOGETCMAP_SPARC commands (CVE-2018-6412).
In some circumstances, some operating systems or hypervisors may not expect or properly handle an Intel architecture hardware debug exception. The error appears to be due to developer interpretation of existing documentation for certain Intel architecture interrupt/exception instructions, namely MOV SS and POP SS. An authenticated attacker may be able to read sensitive data in memory or control low-level operating system functions (CVE-2018-8897).
Linux kernel is vulnerable to a heap-based buffer overflow in the fs/ext4/xattr.c:ext4_xattr_set_entry() function. An attacker could exploit this by operating on a mounted crafted ext4 image (CVE-2018-10840).
The kvm functions that were used in the emulation of fxrstor, fxsave, sgdt and sidt were originally meant for task switching, and as such they did not check privilege levels. This allowed guest userspace to guest kernel write (CVE-2018-10853).
A flaw was found in Linux kernel ext4 File System. A use-after-free in ext4_ext_remove_space() when mounting and operating a crafted ext4 image (CVE-2018-10876).
Linux kernel ext4 filesystem is vulnerable to an out-of-bound access in the ext4_ext_drop_refs() function when operating on a crafted ext4 filesystem image (CVE-2018-10877).
A flaw was found in Linux kernel ext4 filesystem. A local user can cause a use-after-free in ext4_xattr_set_entry function and so a denial of service or possibly unspecified other impact by when renaming a file in a crafted ext4 filesystem image (CVE-2018-10879).
A flaw was found in Linux kernel ext4 filesystem code. A stack-out-of-bounds write in ext4_update_inline_data() is possible when mounting and writing to a crafted ext4 image. An attacker could use this to cause a system crash and a denial of service (CVE-2018-10880).
A flaw was found in Linux kernel ext4 filesystem. A local user can cause an out-of-bound access in ext4_get_group_info function and so a denial of service and a system crash by mounting and operating on a crafted ext4 filesystem image (CVE-2018-10881).
A flaw was…
- Record
MGASA-2018-0341- Updated
- 2026-11-02
OSVopenSUSE-SU-2024:11520-1 No score
xen-4.15.1_01-1.2 on GA media
These are all security issues fixed in the xen-4.15.1_01-1.2 package on the GA media of openSUSE Tumbleweed.
- Record
openSUSE-SU-2024:11520-1- Updated
- 2026-11-02
OSVSUSE-SU-2018:1171-1 No score
Security update for the Linux Kernel
The SUSE Linux Enterprise 11 SP4 kernel was updated to receive various security and bugfixes.
The following security bugs were fixed:
- CVE-2018-1087: And an unprivileged KVM guest user could use this flaw to potentially escalate their privileges inside a guest. (bsc#1087088)
- CVE-2018-8897: An unprivileged system user could use incorrect set up interrupt stacks to crash the Linux kernel resulting in DoS issue. (bsc#1087088)
- CVE-2018-10124: The kill_something_info function in kernel/signal.c in the Linux kernel before 4.13, when an unspecified architecture and compiler is used, might allow local users to cause a denial of service via an INT_MIN argument (bnc#1089752).
The following non-security bugs were fixed:
- kvm/x86: fix icebp instruction handling (bsc#1087088).
- media: cpia2: Fix a couple off by one bugs (bsc#1050431).
- nfs: add nostatflush mount option (bsc#1065726).
- nfs: allow flush-on-stat to be disabled (bsc#1065726).
- powerpc/fadump: Add a warning when 'fadump_reserve_mem=' is used (bnc#1032084, FATE#323225).
- powerpc/fadump: reuse crashkernel parameter for fadump memory reservation (bnc#1032084, FATE#323225).
- powerpc/fadump: update documentation about crashkernel parameter reuse (bnc#1032084, FATE#323225).
- powerpc/fadump: use 'fadump_reserve_mem=' when specified (bnc#1032084, FATE#323225).
- x86/entry/64: Do not use IST entry for #BP stack (bsc#1087088).
- Record
SUSE-SU-2018:1171-1- Updated
- 2026-11-02
OSVSUSE-SU-2018:1172-1 No score
Security update for the Linux Kernel
The SUSE Linux Enterprise 11 SP3 LTSS kernel was updated to receive various security and bugfixes.
The following security bugs were fixed:
- CVE-2018-1087: And an unprivileged KVM guest user could use this flaw to potentially escalate their privileges inside a guest. (bsc#1087088)
- CVE-2018-8897: An unprivileged system user could use incorrect set up interrupt stacks to crash the Linux kernel resulting in DoS issue. (bsc#1087088)
- CVE-2018-10124: The kill_something_info function in kernel/signal.c might allow local users to cause a denial of service via an INT_MIN argument (bnc#1089752).
- CVE-2018-10087: The kernel_wait4 function in kernel/exit.c might allow local users to cause a denial of service by triggering an attempted use of the -INT_MIN value (bnc#1089608).
- CVE-2018-7757: Memory leak in the sas_smp_get_phy_events function in drivers/scsi/libsas/sas_expander.c allowed local users to cause a denial of service (memory consumption) via many read accesses to files in the /sys/class/sas_phy directory, as demonstrated by the /sys/class/sas_phy/phy-1:0:12/invalid_dword_count file (bnc#1084536 1087209).
- CVE-2018-7566: A Buffer Overflow via an SNDRV_SEQ_IOCTL_SET_CLIENT_POOL ioctl write operation to /dev/snd/seq by a local user was fixed (bnc#1083483).
- CVE-2017-0861: Use-after-free vulnerability in the snd_pcm_info function in the ALSA subsystem allowed attackers to gain privileges via unspecified vectors (bnc#1088260).
- CVE-2018-8822: Incorrect buffer length handling in the ncp_read_kernel function in fs/ncpfs/ncplib_kernel.c could be exploited by malicious NCPFS servers to crash the kernel or execute code (bnc#1086162).
- CVE-2017-13166: An elevation of privilege vulnerability in the kernel v4l2 video driver. (bnc#1072865).
- CVE-2017-18203: The dm_get_from_kobject function in drivers/md/dm.c allow local users to cause a denial of service (BUG) by leveraging a race condition with __dm_destroy during creation and removal of DM devices (bnc#1083242).
- CVE-2017-16911: The vhci_hcd driver allowed allows local attackers to disclose kernel memory addresses. Successful exploitation requires that a USB device is attached over IP (bnc#1078674).
- CVE-2017-18208: The madvise_willneed function in mm/madvise.c allowed local users to cause a denial of service (infinite loop) by triggering use of MADVISE_WILLNEED for a DAX mapping (bnc#1083494).
- CVE-2017-16644: The hdpvr_probe function in drivers/media/usb/hdpvr/hdpvr-core.c allowed local users to cause a denial of service (improper error handling and system crash) or possibly have unspecified other impact via a crafted USB device (bnc#1067118).
- CVE-2018-6927: The futex_requeue function in kernel/futex.c might allow attackers to cause a denial of service (integer overflow) or possibly have unspecified other impact by triggering a negative wake or requeue value (bnc#1080757).
- CVE-2017-16914: The 'stub_send_ret_submit()' function (drivers/usb/usbip/stub_tx.c) allowed attackers to cause a denial of service (NULL pointer dereference) via a specially crafted USB over IP packet (bnc#1078669).
- CVE-2016-7915: The hid_input_field function in drivers/hid/hid-core.c allowed physically proximate attackers to obtain sensitive information from kernel memory or cause a denial of service (out-of-bounds read) by connecting a device, as demonstrated by a Logitech DJ receiver (bnc#1010470).
- CVE-2015-5156: The virtnet_probe function in drivers/net/virtio_net.c attempted to support a FRAGLIST feature without proper memory allocation, which allowed guest OS users to cause a denial of service (buffer overflow and memory corruption) via a crafted sequence of fragmented packets (bnc#940776).
- CVE-2017-12190: The bio_map_user_iov and bio_unmap_user functions in block/bio.c did unbalanced refcounting when a SCSI I/O vector has small consecutive buffers belonging to the same page. The bio_add_pc_page function merges them into one, but the page reference is never dropped. This causes a memory…
- Record
SUSE-SU-2018:1172-1- Updated
- 2026-11-02
OSVSUSE-SU-2018:1173-1 No score
Security update for the Linux Kernel
The SUSE Linux Enterprise 12 SP2 LTSS kernel was updated to 4.4.121 to receive various security and bugfixes.
The following security bugs were fixed:
- CVE-2018-8781: The udl_fb_mmap function in drivers/gpu/drm/udl/udl_fb.c had an integer-overflow vulnerability that allowed local users with access to the udldrmfb driver to obtain full read and write permissions on kernel physical pages, resulting in a code execution in kernel space (bnc#1090643).
- CVE-2018-10124: The kill_something_info function in kernel/signal.c might have allowed local users to cause a denial of service via an INT_MIN argument (bnc#1089752).
- CVE-2018-10087: The kernel_wait4 function in kernel/exit.c might have allowed local users to cause a denial of service by triggering an attempted use of the -INT_MIN value (bnc#1089608).
- CVE-2017-18257: The __get_data_block function in fs/f2fs/data.c in the Linux kernel allowed local users to cause a denial of service (integer overflow and loop) via crafted use of the open and fallocate system calls with an FS_IOC_FIEMAP ioctl. (bnc#1088241)
- CVE-2018-8822: Incorrect buffer length handling in the ncp_read_kernel function in fs/ncpfs/ncplib_kernel.c could be exploited by malicious NCPFS servers to crash the kernel or execute code (bnc#1086162).
- CVE-2018-8043: The unimac_mdio_probe function in drivers/net/phy/mdio-bcm-unimac.c did not validate certain resource availability, which allowed local users to cause a denial of service (NULL pointer dereference) (bnc#1084829).
- CVE-2018-7740: The resv_map_release function in mm/hugetlb.c allowed local users to cause a denial of service (BUG) via a crafted application that made mmap system calls and has a large pgoff argument to the remap_file_pages system call (bnc#1084353).
- CVE-2018-1087: And an unprivileged KVM guest user could use this flaw to potentially escalate their privileges inside a guest. (bsc#1087088)
- CVE-2018-8897: An unprivileged system user could use incorrect set up interrupt stacks to crash the Linux kernel resulting in DoS issue. (bsc#1087088)
The following non-security bugs were fixed:
- alsa: hda/realtek - Fix speaker no sound after system resume (bsc#1031717).
- alsa: hda: Add a power_save blacklist (bnc#1012382).
- alsa: usb-audio: Add a quirck for B&W PX headphones (bnc#1012382).
- arm: dts: LogicPD Torpedo: Fix I2C1 pinmux (bnc#1012382).
- arm: mvebu: Fix broken PL310_ERRATA_753970 selects (bnc#1012382).
- kvm: mmu: Fix overlap between public and private memslots (bnc#1012382).
- Partial revert 'e1000e: Avoid receiver overrun interrupt bursts' (bsc#1075428).
- Revert 'e1000e: Separate signaling for link check/link up' (bsc#1075428).
- Revert 'led: core: Fix brightness setting when setting delay_off=0' (bnc#1012382).
- Revert 'watchdog: hpwdt: Remove legacy NMI sourcing (bsc#1085185).' This reverts commit 5d4a2355a2a1c2ec6fdf9d18b68ca0a04ff73c70.
- bpf, x64: implement retpoline for tail call (bnc#1012382).
- bridge: check brport attr show in brport_show (bnc#1012382).
- btrfs: Only check first key for committed tree blocks (bsc#1084721).
- btrfs: Validate child tree block's level and first key (bsc#1084721).
- btrfs: preserve i_mode if __btrfs_set_acl() fails (bnc#1012382).
- ch9200: use skb_cow_head() to deal with cloned skbs (bsc#1088684).
- cpufreq: s3c24xx: Fix broken s3c_cpufreq_init() (bnc#1012382).
- dcache: Add cond_resched in shrink_dentry_list (bsc#1086194).
- dm io: fix duplicate bio completion due to missing ref count (bnc#1012382).
- drm/i915/cmdparser: Do not check past the cmd length (bsc#1031717).
- drm/i915/psr: Check for the specific AUX_FRAME_SYNC cap bit (bsc#1031717).
- e1000e: Avoid missed interrupts following ICR read (bsc#1075428).
- e1000e: Avoid receiver overrun interrupt bursts (bsc#1075428).
- e1000e: Fix check_for_link return value with autoneg off (bsc#1075428).
- e1000e: Fix link check race condition (bsc#1075428).
- e1000e: Fix queue interrupt re-raising in Other interrupt (bsc#1075428).
- e1000e: Remove…
- Record
SUSE-SU-2018:1173-1- Updated
- 2026-11-02
OSVSUSE-SU-2018:1173-2 No score
Security update for the Linux Kernel
The SUSE Linux Enterprise 12 SP2 LTSS kernel was updated to 4.4.121 to receive various security and bugfixes.
The following security bugs were fixed:
- CVE-2018-8781: The udl_fb_mmap function in drivers/gpu/drm/udl/udl_fb.c had an integer-overflow vulnerability that allowed local users with access to the udldrmfb driver to obtain full read and write permissions on kernel physical pages, resulting in a code execution in kernel space (bnc#1090643).
- CVE-2018-10124: The kill_something_info function in kernel/signal.c might have allowed local users to cause a denial of service via an INT_MIN argument (bnc#1089752).
- CVE-2018-10087: The kernel_wait4 function in kernel/exit.c might have allowed local users to cause a denial of service by triggering an attempted use of the -INT_MIN value (bnc#1089608).
- CVE-2017-18257: The __get_data_block function in fs/f2fs/data.c in the Linux kernel allowed local users to cause a denial of service (integer overflow and loop) via crafted use of the open and fallocate system calls with an FS_IOC_FIEMAP ioctl. (bnc#1088241)
- CVE-2018-8822: Incorrect buffer length handling in the ncp_read_kernel function in fs/ncpfs/ncplib_kernel.c could be exploited by malicious NCPFS servers to crash the kernel or execute code (bnc#1086162).
- CVE-2018-8043: The unimac_mdio_probe function in drivers/net/phy/mdio-bcm-unimac.c did not validate certain resource availability, which allowed local users to cause a denial of service (NULL pointer dereference) (bnc#1084829).
- CVE-2018-7740: The resv_map_release function in mm/hugetlb.c allowed local users to cause a denial of service (BUG) via a crafted application that made mmap system calls and has a large pgoff argument to the remap_file_pages system call (bnc#1084353).
- CVE-2018-1087: And an unprivileged KVM guest user could use this flaw to potentially escalate their privileges inside a guest. (bsc#1087088)
- CVE-2018-8897: An unprivileged system user could use incorrect set up interrupt stacks to crash the Linux kernel resulting in DoS issue. (bsc#1087088)
The following non-security bugs were fixed:
- alsa: hda/realtek - Fix speaker no sound after system resume (bsc#1031717).
- alsa: hda: Add a power_save blacklist (bnc#1012382).
- alsa: usb-audio: Add a quirck for B&W PX headphones (bnc#1012382).
- arm: dts: LogicPD Torpedo: Fix I2C1 pinmux (bnc#1012382).
- arm: mvebu: Fix broken PL310_ERRATA_753970 selects (bnc#1012382).
- kvm: mmu: Fix overlap between public and private memslots (bnc#1012382).
- Partial revert 'e1000e: Avoid receiver overrun interrupt bursts' (bsc#1075428).
- Revert 'e1000e: Separate signaling for link check/link up' (bsc#1075428).
- Revert 'led: core: Fix brightness setting when setting delay_off=0' (bnc#1012382).
- Revert 'watchdog: hpwdt: Remove legacy NMI sourcing (bsc#1085185).' This reverts commit 5d4a2355a2a1c2ec6fdf9d18b68ca0a04ff73c70.
- bpf, x64: implement retpoline for tail call (bnc#1012382).
- bridge: check brport attr show in brport_show (bnc#1012382).
- btrfs: Only check first key for committed tree blocks (bsc#1084721).
- btrfs: Validate child tree block's level and first key (bsc#1084721).
- btrfs: preserve i_mode if __btrfs_set_acl() fails (bnc#1012382).
- ch9200: use skb_cow_head() to deal with cloned skbs (bsc#1088684).
- cpufreq: s3c24xx: Fix broken s3c_cpufreq_init() (bnc#1012382).
- dcache: Add cond_resched in shrink_dentry_list (bsc#1086194).
- dm io: fix duplicate bio completion due to missing ref count (bnc#1012382).
- drm/i915/cmdparser: Do not check past the cmd length (bsc#1031717).
- drm/i915/psr: Check for the specific AUX_FRAME_SYNC cap bit (bsc#1031717).
- e1000e: Avoid missed interrupts following ICR read (bsc#1075428).
- e1000e: Avoid receiver overrun interrupt bursts (bsc#1075428).
- e1000e: Fix check_for_link return value with autoneg off (bsc#1075428).
- e1000e: Fix link check race condition (bsc#1075428).
- e1000e: Fix queue interrupt re-raising in Other interrupt (bsc#1075428).
- e1000e: Remove…
- Record
SUSE-SU-2018:1173-2- Updated
- 2026-11-02
OSVSUSE-SU-2018:1177-1 No score
Security update for xen
This update for xen fixes several issues.
These security issues were fixed:
- CVE-2018-8897: Prevent mishandling of debug exceptions on x86 (XSA-260, bsc#1090820)
- Handle HPET timers in IO-APIC mode correctly to prevent malicious or buggy HVM guests from causing a hypervisor crash or potentially privilege escalation/information leaks (XSA-261, bsc#1090822)
- Prevent unbounded loop, induced by qemu allowing an attacker to permanently keep a physical CPU core busy (XSA-262, bsc#1090823)
- CVE-2018-10472: x86 HVM guest OS users (in certain configurations) were able to read arbitrary dom0 files via QMP live insertion of a CDROM, in conjunction with specifying the target file as the backing file of a snapshot (bsc#1089152).
- CVE-2018-10471: x86 PV guest OS users were able to cause a denial of service (out-of-bounds zero write and hypervisor crash) via unexpected INT 80 processing, because of an incorrect fix for CVE-2017-5754 (bsc#1089635).
- CVE-2018-7550: The load_multiboot function allowed local guest OS users to execute arbitrary code on the host via a mh_load_end_addr value greater than mh_bss_end_addr, which triggers an out-of-bounds read or write memory access (bsc#1083292).
This non-security issue was fixed:
- bsc#1072834: Prevent unchecked MSR access error
- bsc#1057493: Prevent DomU crashes
- bsc#1086107: Fixed problems with backports for XSA-246 and XSA-247
- Record
SUSE-SU-2018:1177-1- Updated
- 2026-11-02
OSVSUSE-SU-2018:1181-1 No score
Security update for xen
This update for xen fixes several issues.
These security issues were fixed:
- CVE-2018-8897: Prevent mishandling of debug exceptions on x86 (XSA-260, bsc#1090820)
- Handle HPET timers in IO-APIC mode correctly to prevent malicious or buggy HVM guests from causing a hypervisor crash or potentially privilege escalation/information leaks (XSA-261, bsc#1090822)
- Prevent unbounded loop, induced by qemu allowing an attacker to permanently keep a physical CPU core busy (XSA-262, bsc#1090823)
- CVE-2018-10472: x86 HVM guest OS users (in certain configurations) were able to read arbitrary dom0 files via QMP live insertion of a CDROM, in conjunction with specifying the target file as the backing file of a snapshot (bsc#1089152).
- CVE-2018-10471: x86 PV guest OS users were able to cause a denial of service (out-of-bounds zero write and hypervisor crash) via unexpected INT 80 processing, because of an incorrect fix for CVE-2017-5754 (bsc#1089635).
- CVE-2018-7550: The load_multiboot function allowed local guest OS users to execute arbitrary code on the host via a mh_load_end_addr value greater than mh_bss_end_addr, which triggers an out-of-bounds read or write memory access (bsc#1083292).
These non-security issues were fixed:
- bsc#1072834: Prevent unchecked MSR access error
- bsc#1035442: Increase the value of LIBXL_DESTROY_TIMEOUT from 10 to 100 seconds, allowing for more domUs to be shutdown in parallel
- bsc#1057493: Prevent DomU crash
- Record
SUSE-SU-2018:1181-1- Updated
- 2026-11-02
OSVSUSE-SU-2018:1184-1 No score
Security update for xen
This update for xen to version 4.9.2 fixes several issues.
This feature was added:
- Added script, udev rule and systemd service to watch for vcpu online/offline events in a HVM domU. They are triggered via 'xl vcpu-set domU N'
These security issues were fixed:
- CVE-2018-8897: Prevent mishandling of debug exceptions on x86 (XSA-260, bsc#1090820)
- Handle HPET timers in IO-APIC mode correctly to prevent malicious or buggy HVM guests from causing a hypervisor crash or potentially privilege escalation/information leaks (XSA-261, bsc#1090822)
- Prevent unbounded loop, induced by qemu allowing an attacker to permanently keep a physical CPU core busy (XSA-262, bsc#1090823)
- CVE-2018-10472: x86 HVM guest OS users (in certain configurations) were able to read arbitrary dom0 files via QMP live insertion of a CDROM, in conjunction with specifying the target file as the backing file of a snapshot (bsc#1089152).
- CVE-2018-10471: x86 PV guest OS users were able to cause a denial of service (out-of-bounds zero write and hypervisor crash) via unexpected INT 80 processing, because of an incorrect fix for CVE-2017-5754 (bsc#1089635).
- CVE-2018-7540: x86 PV guest OS users were able to cause a denial of service (host OS CPU hang) via non-preemptable L3/L4 pagetable freeing (bsc#1080635).
- CVE-2018-7541: Guest OS users were able to cause a denial of service (hypervisor crash) or gain privileges by triggering a grant-table transition from v2 to v1 (bsc#1080662).
- CVE-2018-7542: x86 PVH guest OS users were able to cause a denial of service (NULL pointer dereference and hypervisor crash) by leveraging the mishandling of configurations that lack a Local APIC (bsc#1080634).
These non-security issues were fixed:
- bsc#1087252: Update built-in defaults for xenstored in stubdom, keep default to run xenstored as daemon in dom0
- bsc#1087251: Preserve xen-syms from xen-dbg.gz to allow processing vmcores with crash(1)
- bsc#1072834: Prevent unchecked MSR access error
- Record
SUSE-SU-2018:1184-1- Updated
- 2026-11-02
OSVSUSE-SU-2018:1202-1 No score
Security update for xen
This update for xen fixes several issues.
These security issues were fixed:
- CVE-2018-8897: Prevent mishandling of debug exceptions on x86 (XSA-260, bsc#1090820)
- Handle HPET timers in IO-APIC mode correctly to prevent malicious or buggy HVM guests from causing a hypervisor crash or potentially privilege escalation/information leaks (XSA-261, bsc#1090822)
- Prevent unbounded loop, induced by qemu allowing an attacker to permanently keep a physical CPU core busy (XSA-262, bsc#1090823)
- CVE-2018-10472: x86 HVM guest OS users (in certain configurations) were able to read arbitrary dom0 files via QMP live insertion of a CDROM, in conjunction with specifying the target file as the backing file of a snapshot (bsc#1089152).
- CVE-2018-10471: x86 PV guest OS users were able to cause a denial of service (out-of-bounds zero write and hypervisor crash) via unexpected INT 80 processing, because of an incorrect fix for CVE-2017-5754 (bsc#1089635).
- CVE-2018-7550: The load_multiboot function allowed local guest OS users to execute arbitrary code on the host via a mh_load_end_addr value greater than mh_bss_end_addr, which triggers an out-of-bounds read or write memory access (bsc#1083292).
- Record
SUSE-SU-2018:1202-1- Updated
- 2026-11-02
OSVSUSE-SU-2018:1203-1 No score
Security update for xen
This update for xen fixes several issues.
These security issues were fixed:
- CVE-2018-8897: Prevent mishandling of debug exceptions on x86 (XSA-260, bsc#1090820)
- Handle HPET timers in IO-APIC mode correctly to prevent malicious or buggy HVM guests from causing a hypervisor crash or potentially privilege escalation/information leaks (XSA-261, bsc#1090822)
- Prevent unbounded loop, induced by qemu allowing an attacker to permanently keep a physical CPU core busy (XSA-262, bsc#1090823)
- CVE-2018-10472: x86 HVM guest OS users (in certain configurations) were able to read arbitrary dom0 files via QMP live insertion of a CDROM, in conjunction with specifying the target file as the backing file of a snapshot (bsc#1089152).
- CVE-2018-10471: x86 PV guest OS users were able to cause a denial of service (out-of-bounds zero write and hypervisor crash) via unexpected INT 80 processing, because of an incorrect fix for CVE-2017-5754 (bsc#1089635).
- CVE-2018-7550: The load_multiboot function allowed local guest OS users to execute arbitrary code on the host via a mh_load_end_addr value greater than mh_bss_end_addr, which triggers an out-of-bounds read or write memory access (bsc#1083292).
- Record
SUSE-SU-2018:1203-1- Updated
- 2026-11-02
OSVSUSE-SU-2018:1216-1 No score
Security update for xen
This update for xen fixes several issues.
These security issues were fixed:
- CVE-2018-8897: Prevent mishandling of debug exceptions on x86 (XSA-260, bsc#1090820)
- Handle HPET timers in IO-APIC mode correctly to prevent malicious or buggy HVM guests from causing a hypervisor crash or potentially privilege escalation/information leaks (XSA-261, bsc#1090822)
- Prevent unbounded loop, induced by qemu allowing an attacker to permanently keep a physical CPU core busy (XSA-262, bsc#1090823)
- CVE-2018-10472: x86 HVM guest OS users (in certain configurations) were able to read arbitrary dom0 files via QMP live insertion of a CDROM, in conjunction with specifying the target file as the backing file of a snapshot (bsc#1089152).
- CVE-2018-10471: x86 PV guest OS users were able to cause a denial of service (out-of-bounds zero write and hypervisor crash) via unexpected INT 80 processing, because of an incorrect fix for CVE-2017-5754 (bsc#1089635).
These non-security issues were fixed:
- bsc#1086039: Ensure that Dom0 does represent DomU cpu flags correctly
- bsc#1027519: Fixed shadow mode guests
- Record
SUSE-SU-2018:1216-1- Updated
- 2026-11-02
OSVSUSE-SU-2018:1220-1 No score
Security update for the Linux Kernel
The SUSE Linux Enterprise 12 SP1 LTSS kernel was updated to receive various security and bugfixes.
The following security bugs were fixed:
- CVE-2018-1087: And an unprivileged KVM guest user could use this flaw to potentially escalate their privileges inside a guest. (bsc#1087088)
- CVE-2018-8897: An unprivileged system user could use incorrect set up interrupt stacks to crash the Linux kernel resulting in DoS issue. (bsc#1087088)
- CVE-2018-8781: The udl_fb_mmap function in drivers/gpu/drm/udl/udl_fb.c had an integer-overflow vulnerability allowing local users with access to the udldrmfb driver to obtain full read and write permissions on kernel physical pages, resulting in a code execution in kernel space (bnc#1090643).
- CVE-2018-10124: The kill_something_info function in kernel/signal.c might allow local users to cause a denial of service via an INT_MIN argument (bnc#1089752).
- CVE-2018-10087: The kernel_wait4 function in kernel/exit.c in might allow local users to cause a denial of service by triggering an attempted use of the -INT_MIN value (bnc#1089608).
- CVE-2018-7757: Memory leak in the sas_smp_get_phy_events function in drivers/scsi/libsas/sas_expander.c allowed local users to cause a denial of service (memory consumption) via many read accesses to files in the /sys/class/sas_phy directory, as demonstrated by the /sys/class/sas_phy/phy-1:0:12/invalid_dword_count file (bnc#1084536).
- CVE-2017-13220: An elevation of privilege vulnerability in the Upstream kernel bluez was fixed. (bnc#1076537).
- CVE-2017-11089: A buffer overread is observed in nl80211_set_station when user space application sends attribute NL80211_ATTR_LOCAL_MESH_POWER_MODE with data of size less than 4 bytes (bnc#1088261).
- CVE-2017-0861: Use-after-free vulnerability in the snd_pcm_info function in the ALSA subsystem allowed attackers to gain privileges via unspecified vectors (bnc#1088260).
- CVE-2018-8822: Incorrect buffer length handling in the ncp_read_kernel function in fs/ncpfs/ncplib_kernel.c could be exploited by malicious NCPFS servers to crash the kernel or execute code (bnc#1086162).
- CVE-2017-18203: The dm_get_from_kobject function in drivers/md/dm.c allowed local users to cause a denial of service (BUG) by leveraging a race condition with __dm_destroy during creation and removal of DM devices (bnc#1083242).
The following non-security bugs were fixed:
- Integrate fixes resulting from bsc#1088147 More info in the respective commit messages.
- kabi: x86/kaiser: properly align trampoline stack (bsc#1087260).
- dcache: Add cond_resched in shrink_dentry_list (bsc#1086194).
- kGraft: fix small race in reversion code (bsc#1083125).
- kabi/severities: Ignore kgr_shadow_* kABI changes
- kvm/x86: fix icebp instruction handling (bsc#1087088).
- livepatch: Allow to call a custom callback when freeing shadow variables (bsc#1082299 fate#313296).
- livepatch: Initialize shadow variables safely by a custom callback (bsc#1082299 fate#313296).
- usbnet: Fix a race between usbnet_stop() and the BH (bsc#1083275).
- x86/entry/64: Do not use IST entry for #BP stack (bsc#1087088).
- x86/espfix: Fix return stack in do_double_fault() (bsc#1085279).
- x86/kaiser: properly align trampoline stack (bsc#1087260).
- x86/retpoline: do not perform thunk calls in ring3 vsyscall code (bsc#1085331).
- Record
SUSE-SU-2018:1220-1- Updated
- 2026-11-02
OSVSUSE-SU-2018:1221-1 No score
Security update for the Linux Kernel
The SUSE Linux Enterprise 12 GA LTSS kernel was updated to receive various security and bugfixes.
The following security bugs were fixed:
- CVE-2018-1087: And an unprivileged KVM guest user could use this flaw to potentially escalate their privileges inside a guest. (bsc#1087088)
- CVE-2018-8897: An unprivileged system user could use incorrect set up interrupt stacks to crash the Linux kernel resulting in DoS issue. (bsc#1087088)
- CVE-2018-8781: The udl_fb_mmap function in drivers/gpu/drm/udl/udl_fb.c had an integer-overflow vulnerability allowing local users with access to the udldrmfb driver to obtain full read and write permissions on kernel physical pages, resulting in a code execution in kernel space (bnc#1090643).
- CVE-2018-10124: The kill_something_info function in kernel/signal.c might allow local users to cause a denial of service via an INT_MIN argument (bnc#1089752).
- CVE-2018-10087: The kernel_wait4 function in kernel/exit.c might allow local users to cause a denial of service by triggering an attempted use of the -INT_MIN value (bnc#1089608).
- CVE-2018-7757: Memory leak in the sas_smp_get_phy_events function in drivers/scsi/libsas/sas_expander.c allowed local users to cause a denial of service (memory consumption) via many read accesses to files in the /sys/class/sas_phy directory, as demonstrated by the /sys/class/sas_phy/phy-1:0:12/invalid_dword_count file (bnc#1084536 1087209).
- CVE-2017-13220: An elevation of privilege vulnerability in the Upstream kernel bluez was fixed. (bnc#1076537).
- CVE-2017-11089: A buffer overread was observed in nl80211_set_station when user space application sends attribute NL80211_ATTR_LOCAL_MESH_POWER_MODE with data of size less than 4 bytes (bnc#1088261).
- CVE-2017-0861: Use-after-free vulnerability in the snd_pcm_info function in the ALSA subsystem allowed attackers to gain privileges via unspecified vectors (bnc#1088260).
- CVE-2018-8822: Incorrect buffer length handling in the ncp_read_kernel function in fs/ncpfs/ncplib_kernel.c could be exploited by malicious NCPFS servers to crash the kernel or execute code (bnc#1086162).
- CVE-2017-18203: The dm_get_from_kobject function in drivers/md/dm.c allow local users to cause a denial of service (BUG) by leveraging a race condition with __dm_destroy during creation and removal of DM devices (bnc#1083242).
The following non-security bugs were fixed:
- Integrate fixes resulting from bsc#1088147 More info in the respective commit messages.
- KABI: x86/kaiser: properly align trampoline stack (bsc#1087260).
- kGraft: fix small race in reversion code (bsc#1083125).
- kabi/severities: Ignore kgr_shadow_* kABI changes
- kvm/x86: fix icebp instruction handling (bsc#1087088).
- livepatch: Allow to call a custom callback when freeing shadow variables (bsc#1082299 fate#313296).
- livepatch: Initialize shadow variables safely by a custom callback (bsc#1082299 fate#313296).
- x86/entry/64: Do not use IST entry for #BP stack (bsc#1087088).
- x86/kaiser: properly align trampoline stack (bsc#1087260).
- x86/retpoline: do not perform thunk calls in ring3 vsyscall code (bsc#1085331).
- Record
SUSE-SU-2018:1221-1- Updated
- 2026-11-02
OSVSUSE-SU-2018:1505-1 No score
Security update for the Linux Kernel (Live Patch 10 for SLE 12 SP2)
This update for the Linux Kernel 4.4.74-92_29 fixes several issues.
The following security issues were fixed:
- CVE-2017-13166: An elevation of privilege vulnerability in the kernel v4l2 video driver was fixed. (bsc#1085447).
- CVE-2018-8897: A statement in the System Programming Guide of the Intel 64 and IA-32 Architectures Software Developer's Manual (SDM) was mishandled in the development of some or all operating-system kernels, resulting in unexpected behavior for #DB exceptions that are deferred by MOV SS or POP SS, as demonstrated by (for example) privilege escalation in Windows, macOS, some Xen configurations, or FreeBSD, or a Linux kernel crash. The MOV to SS and POP SS instructions inhibit interrupts (including NMIs), data breakpoints, and single step trap exceptions until the instruction boundary following the next instruction (SDM Vol. 3A; section 6.8.3). (The inhibited data breakpoints are those on memory accessed by the MOV to SS or POP to SS instruction itself.) Note that debug exceptions are not inhibited by the interrupt enable (EFLAGS.IF) system flag (SDM Vol. 3A; section 2.3). If the instruction following the MOV to SS or POP to SS instruction is an instruction like SYSCALL, SYSENTER, INT 3, etc. that transfers control to the operating system at CPL < 3, the debug exception is delivered after the transfer to CPL < 3 is complete. OS kernels may not expect this order of events and may therefore experience unexpected behavior when it occurs (bsc#1090368).
- CVE-2018-8781: The udl_fb_mmap function in drivers/gpu/drm/udl/udl_fb.c had an integer-overflow vulnerability allowing local users with access to the udldrmfb driver to obtain full read and write permissions on kernel physical pages, resulting in a code execution in kernel space (bsc#1090646).
- bsc#1083125: Fixed kgraft: small race in reversion code
- CVE-2018-1087: kernel KVM was vulnerable to a flaw in the way the Linux kernel's KVM hypervisor handled exceptions delivered after a stack switch operation via Mov SS or Pop SS instructions. During the stack switch operation, the processor did not deliver interrupts and exceptions, rather they are delivered once the first instruction after the stack switch is executed. An unprivileged KVM guest user could use this flaw to crash the guest or, potentially, escalate their privileges in the guest (bsc#1090869) before
- Record
SUSE-SU-2018:1505-1- Updated
- 2026-11-02
OSVSUSE-SU-2018:1506-1 No score
Security update for the Linux Kernel (Live Patch 16 for SLE 12 SP1)
This update for the Linux Kernel 3.12.74-60_64_45 fixes several issues.
The following security issues were fixed:
- CVE-2017-13166: An elevation of privilege vulnerability in the kernel v4l2 video driver was fixed. (bsc#1085447).
- CVE-2018-8897: A statement in the System Programming Guide of the Intel 64 and IA-32 Architectures Software Developer's Manual (SDM) was mishandled in the development of some or all operating-system kernels, resulting in unexpected behavior for #DB exceptions that are deferred by MOV SS or POP SS, as demonstrated by (for example) privilege escalation in Windows, macOS, some Xen configurations, or FreeBSD, or a Linux kernel crash. The MOV to SS and POP SS instructions inhibit interrupts (including NMIs), data breakpoints, and single step trap exceptions until the instruction boundary following the next instruction (SDM Vol. 3A; section 6.8.3). (The inhibited data breakpoints are those on memory accessed by the MOV to SS or POP to SS instruction itself.) Note that debug exceptions are not inhibited by the interrupt enable (EFLAGS.IF) system flag (SDM Vol. 3A; section 2.3). If the instruction following the MOV to SS or POP to SS instruction is an instruction like SYSCALL, SYSENTER, INT 3, etc. that transfers control to the operating system at CPL < 3, the debug exception is delivered after the transfer to CPL < 3 is complete. OS kernels may not expect this order of events and may therefore experience unexpected behavior when it occurs (bsc#1090368).
- CVE-2018-8781: The udl_fb_mmap function in drivers/gpu/drm/udl/udl_fb.c had an integer-overflow vulnerability allowing local users with access to the udldrmfb driver to obtain full read and write permissions on kernel physical pages, resulting in a code execution in kernel space (bsc#1090646).
- bsc#1083125: Fixed kgraft: small race in reversion code
- Record
SUSE-SU-2018:1506-1- Updated
- 2026-11-02
OSVSUSE-SU-2018:1509-1 No score
Security update for the Linux Kernel (Live Patch 24 for SLE 12 SP1)
This update for the Linux Kernel 3.12.74-60_64_69 fixes several issues.
The following security issues were fixed:
- CVE-2017-13166: An elevation of privilege vulnerability in the kernel v4l2 video driver was fixed. (bsc#1085447).
- CVE-2018-8897: A statement in the System Programming Guide of the Intel 64 and IA-32 Architectures Software Developer's Manual (SDM) was mishandled in the development of some or all operating-system kernels, resulting in unexpected behavior for #DB exceptions that are deferred by MOV SS or POP SS, as demonstrated by (for example) privilege escalation in Windows, macOS, some Xen configurations, or FreeBSD, or a Linux kernel crash. The MOV to SS and POP SS instructions inhibit interrupts (including NMIs), data breakpoints, and single step trap exceptions until the instruction boundary following the next instruction (SDM Vol. 3A; section 6.8.3). (The inhibited data breakpoints are those on memory accessed by the MOV to SS or POP to SS instruction itself.) Note that debug exceptions are not inhibited by the interrupt enable (EFLAGS.IF) system flag (SDM Vol. 3A; section 2.3). If the instruction following the MOV to SS or POP to SS instruction is an instruction like SYSCALL, SYSENTER, INT 3, etc. that transfers control to the operating system at CPL < 3, the debug exception is delivered after the transfer to CPL < 3 is complete. OS kernels may not expect this order of events and may therefore experience unexpected behavior when it occurs (bsc#1090368).
- CVE-2018-8781: The udl_fb_mmap function in drivers/gpu/drm/udl/udl_fb.c had an integer-overflow vulnerability allowing local users with access to the udldrmfb driver to obtain full read and write permissions on kernel physical pages, resulting in a code execution in kernel space (bsc#1090646).
- bsc#1083125: Fixed kgraft: small race in reversion code
- Record
SUSE-SU-2018:1509-1- Updated
- 2026-11-02
OSVSUSE-SU-2018:1510-1 No score
Security update for the Linux Kernel (Live Patch 17 for SLE 12 SP2)
This update for the Linux Kernel 4.4.103-92_56 fixes several issues.
The following security issues were fixed:
- CVE-2017-13166: An elevation of privilege vulnerability in the kernel v4l2 video driver was fixed. (bsc#1085447).
- CVE-2018-8897: A statement in the System Programming Guide of the Intel 64 and IA-32 Architectures Software Developer's Manual (SDM) was mishandled in the development of some or all operating-system kernels, resulting in unexpected behavior for #DB exceptions that are deferred by MOV SS or POP SS, as demonstrated by (for example) privilege escalation in Windows, macOS, some Xen configurations, or FreeBSD, or a Linux kernel crash. The MOV to SS and POP SS instructions inhibit interrupts (including NMIs), data breakpoints, and single step trap exceptions until the instruction boundary following the next instruction (SDM Vol. 3A; section 6.8.3). (The inhibited data breakpoints are those on memory accessed by the MOV to SS or POP to SS instruction itself.) Note that debug exceptions are not inhibited by the interrupt enable (EFLAGS.IF) system flag (SDM Vol. 3A; section 2.3). If the instruction following the MOV to SS or POP to SS instruction is an instruction like SYSCALL, SYSENTER, INT 3, etc. that transfers control to the operating system at CPL < 3, the debug exception is delivered after the transfer to CPL < 3 is complete. OS kernels may not expect this order of events and may therefore experience unexpected behavior when it occurs (bsc#1090368).
- CVE-2018-8781: The udl_fb_mmap function in drivers/gpu/drm/udl/udl_fb.c had an integer-overflow vulnerability allowing local users with access to the udldrmfb driver to obtain full read and write permissions on kernel physical pages, resulting in a code execution in kernel space (bsc#1090646).
- bsc#1083125: Fixed kgraft: small race in reversion code
- CVE-2018-1087: kernel KVM was vulnerable to a flaw in the way the Linux kernel's KVM hypervisor handled exceptions delivered after a stack switch operation via Mov SS or Pop SS instructions. During the stack switch operation, the processor did not deliver interrupts and exceptions, rather they are delivered once the first instruction after the stack switch is executed. An unprivileged KVM guest user could use this flaw to crash the guest or, potentially, escalate their privileges in the guest (bsc#1090869) before
- Record
SUSE-SU-2018:1510-1- Updated
- 2026-11-02
OSVSUSE-SU-2018:1511-1 No score
Security update for the Linux Kernel (Live Patch 19 for SLE 12 SP2)
This update for the Linux Kernel 4.4.114-92_67 fixes several issues.
The following security issues were fixed:
- CVE-2017-13166: An elevation of privilege vulnerability in the kernel v4l2 video driver was fixed. (bsc#1085447).
- CVE-2018-8897: A statement in the System Programming Guide of the Intel 64 and IA-32 Architectures Software Developer's Manual (SDM) was mishandled in the development of some or all operating-system kernels, resulting in unexpected behavior for #DB exceptions that are deferred by MOV SS or POP SS, as demonstrated by (for example) privilege escalation in Windows, macOS, some Xen configurations, or FreeBSD, or a Linux kernel crash. The MOV to SS and POP SS instructions inhibit interrupts (including NMIs), data breakpoints, and single step trap exceptions until the instruction boundary following the next instruction (SDM Vol. 3A; section 6.8.3). (The inhibited data breakpoints are those on memory accessed by the MOV to SS or POP to SS instruction itself.) Note that debug exceptions are not inhibited by the interrupt enable (EFLAGS.IF) system flag (SDM Vol. 3A; section 2.3). If the instruction following the MOV to SS or POP to SS instruction is an instruction like SYSCALL, SYSENTER, INT 3, etc. that transfers control to the operating system at CPL < 3, the debug exception is delivered after the transfer to CPL < 3 is complete. OS kernels may not expect this order of events and may therefore experience unexpected behavior when it occurs (bsc#1090368).
- CVE-2018-8781: The udl_fb_mmap function in drivers/gpu/drm/udl/udl_fb.c had an integer-overflow vulnerability allowing local users with access to the udldrmfb driver to obtain full read and write permissions on kernel physical pages, resulting in a code execution in kernel space (bsc#1090646).
- bsc#1083125: Fixed kgraft: small race in reversion code
- CVE-2018-1087: kernel KVM was vulnerable to a flaw in the way the Linux kernel's KVM hypervisor handled exceptions delivered after a stack switch operation via Mov SS or Pop SS instructions. During the stack switch operation, the processor did not deliver interrupts and exceptions, rather they are delivered once the first instruction after the stack switch is executed. An unprivileged KVM guest user could use this flaw to crash the guest or, potentially, escalate their privileges in the guest (bsc#1090869) before
- Record
SUSE-SU-2018:1511-1- Updated
- 2026-11-02
OSVSUSE-SU-2018:1512-1 No score
Security update for the Linux Kernel (Live Patch 29 for SLE 12)
This update for the Linux Kernel 3.12.61-52_106 fixes several issues.
The following security issues were fixed:
- CVE-2017-13166: An elevation of privilege vulnerability in the kernel v4l2 video driver was fixed. (bsc#1085447).
- CVE-2018-8897: A statement in the System Programming Guide of the Intel 64 and IA-32 Architectures Software Developer's Manual (SDM) was mishandled in the development of some or all operating-system kernels, resulting in unexpected behavior for #DB exceptions that are deferred by MOV SS or POP SS, as demonstrated by (for example) privilege escalation in Windows, macOS, some Xen configurations, or FreeBSD, or a Linux kernel crash. The MOV to SS and POP SS instructions inhibit interrupts (including NMIs), data breakpoints, and single step trap exceptions until the instruction boundary following the next instruction (SDM Vol. 3A; section 6.8.3). (The inhibited data breakpoints are those on memory accessed by the MOV to SS or POP to SS instruction itself.) Note that debug exceptions are not inhibited by the interrupt enable (EFLAGS.IF) system flag (SDM Vol. 3A; section 2.3). If the instruction following the MOV to SS or POP to SS instruction is an instruction like SYSCALL, SYSENTER, INT 3, etc. that transfers control to the operating system at CPL < 3, the debug exception is delivered after the transfer to CPL < 3 is complete. OS kernels may not expect this order of events and may therefore experience unexpected behavior when it occurs (bsc#1090368).
- CVE-2018-8781: The udl_fb_mmap function in drivers/gpu/drm/udl/udl_fb.c had an integer-overflow vulnerability allowing local users with access to the udldrmfb driver to obtain full read and write permissions on kernel physical pages, resulting in a code execution in kernel space (bsc#1090646).
- bsc#1083125: Fixed kgraft: small race in reversion code
- Record
SUSE-SU-2018:1512-1- Updated
- 2026-11-02
Affected products
Affected packages
| Package | Affected | Fixed |
|---|---|---|
xenAlpine:v3.10 |
before 4.10.1-r1 | 4.10.1-r1 |
xenAlpine:v3.12 |
before 4.10.1-r1 | 4.10.1-r1 |
xenAlpine:v3.13 |
before 4.10.1-r1 | 4.10.1-r1 |
xenAlpine:v3.14 |
before 4.10.1-r1 | 4.10.1-r1 |
xenAlpine:v3.15 |
before 4.10.1-r1 | 4.10.1-r1 |
xenAlpine:v3.16 |
before 4.10.1-r1 | 4.10.1-r1 |
xenAlpine:v3.17 |
before 4.10.1-r1 | 4.10.1-r1 |
xenAlpine:v3.18 |
before 4.10.1-r1 | 4.10.1-r1 |
xenAlpine:v3.19 |
before 4.10.1-r1 | 4.10.1-r1 |
xenAlpine:v3.20 |
before 4.10.1-r1 | 4.10.1-r1 |
Show 290 moreShow less
| Package | Affected | Fixed |
|---|---|---|
xenAlpine:v3.21 |
before 4.10.1-r1 | 4.10.1-r1 |
xenAlpine:v3.22 |
before 4.10.1-r1 | 4.10.1-r1 |
xenAlpine:v3.23 |
before 4.10.1-r1 | 4.10.1-r1 |
xenAlpine:v3.24 |
before 4.10.1-r1 | 4.10.1-r1 |
xenAlpine:v3.4 |
before 4.6.6-r5 | 4.6.6-r5 |
xenAlpine:v3.5 |
before 4.7.3-r9 | 4.7.3-r9 |
xenAlpine:v3.6 |
before 4.8.3-r1 | 4.8.3-r1 |
xenAlpine:v3.7 |
before 4.9.2-r2 | 4.9.2-r2 |
xenAlpine:v3.9 |
before 4.10.1-r1 | 4.10.1-r1 |
linuxDebian:12 |
before 4.15.17-1 | 4.15.17-1 |
linuxDebian:13 |
before 4.15.17-1 | 4.15.17-1 |
linuxDebian:14 |
before 4.15.17-1 | 4.15.17-1 |
xenDebian:12 |
before 4.8.3+xsa262+shim4.10.0+comet3-1+deb9u6 | 4.8.3+xsa262+shim4.10.0+comet3-1+deb9u6 |
xenDebian:13 |
before 4.8.3+xsa262+shim4.10.0+comet3-1+deb9u6 | 4.8.3+xsa262+shim4.10.0+comet3-1+deb9u6 |
xenDebian:14 |
before 4.8.3+xsa262+shim4.10.0+comet3-1+deb9u6 | 4.8.3+xsa262+shim4.10.0+comet3-1+deb9u6 |
xenDebian:7 |
before 4.1.6.lts1-14, plus listed versions 4.1.4-34.1.4-3+deb7u14.1.4-3+deb7u24.1.4-3+deb7u34.1.4-3+deb7u4 Show 20 moreShow less4.1.4-3+deb7u54.1.4-3+deb7u64.1.4-3+deb7u74.1.4-3+deb7u84.1.4-3+deb7u94.1.4-44.1.6.1-1+deb7u14.1.6.lts1-14.1.6.lts1-104.1.6.lts1-114.1.6.lts1-124.1.6.lts1-134.1.6.lts1-24.1.6.lts1-34.1.6.lts1-44.1.6.lts1-54.1.6.lts1-64.1.6.lts1-74.1.6.lts1-84.1.6.lts1-9 |
4.1.6.lts1-14 |
linuxDebian:7 |
before 3.2.102-1, plus listed versions 3.2.101-13.2.41-23.2.41-2+deb7u13.2.41-2+deb7u23.2.41-2+deb7u2~bpo60+1 Show 45 moreShow less3.2.46-13.2.46-1+deb7u13.2.46-1+deb7u1~bpo60+13.2.46-1~bpo60+13.2.51-13.2.51-1~bpo60+13.2.53-13.2.53-23.2.54-13.2.54-23.2.54-2~bpo60+13.2.57-13.2.57-23.2.57-33.2.57-3+deb7u13.2.57-3+deb7u23.2.57-3+deb7u2~bpo60+13.2.60-13.2.60-1+deb7u13.2.60-1+deb7u23.2.60-1+deb7u33.2.60-1+deb7u3~bpo60+13.2.63-13.2.63-23.2.63-2+deb7u13.2.63-2+deb7u1~bpo60+13.2.63-2+deb7u23.2.63-2+deb7u2~bpo60+13.2.65-13.2.65-1+deb7u13.2.65-1+deb7u1~bpo60+13.2.65-1+deb7u23.2.65-1+deb7u2~bpo60+13.2.68-13.2.68-1+deb7u13.2.68-1+deb7u1~bpo60+13.2.68-1+deb7u23.2.68-1+deb7u2~bpo60+13.2.68-1+deb7u33.2.68-1+deb7u3~bpo60+13.2.68-1+deb7u43.2.68-1+deb7u4~bpo60+13.2.68-1+deb7u53.2.68-1+deb7u63.2.68-1+deb7u6~bpo60+1 |
3.2.102-1 |
xenDebian:8 |
before 4.4.4lts4-0+deb8u1, plus listed versions 4.4.1-94.4.1-9+deb8u14.4.1-9+deb8u104.4.1-9+deb8u24.4.1-9+deb8u3 Show 9 moreShow less4.4.1-9+deb8u44.4.1-9+deb8u54.4.1-9+deb8u64.4.1-9+deb8u74.4.1-9+deb8u84.4.1-9+deb8u94.4.4lts1-0+deb8u14.4.4lts2-0+deb8u14.4.4lts3-0+deb8u1 |
4.4.4lts4-0+deb8u1 |
linuxDebian:8 |
before 3.16.56-1+deb8u1, plus listed versions 3.16.36-13.16.36-1+deb8u13.16.36-1+deb8u1~bpo70+13.16.36-1+deb8u23.16.36-1+deb8u2~bpo70+1 Show 45 moreShow less3.16.39-13.16.39-1+deb8u13.16.39-1+deb8u1~bpo70+13.16.39-1+deb8u1~bpo70+1+gcc4.43.16.39-1+deb8u23.16.39-1~bpo70+13.16.43-13.16.43-23.16.43-2+deb8u13.16.43-2+deb8u23.16.43-2+deb8u33.16.43-2+deb8u43.16.43-2+deb8u53.16.48-13.16.51-13.16.51-23.16.51-33.16.51-3+deb8u13.16.56-13.16.7-ckt11-13.16.7-ckt11-1+deb8u13.16.7-ckt11-1+deb8u23.16.7-ckt11-1+deb8u2~bpo70+13.16.7-ckt11-1+deb8u33.16.7-ckt11-1+deb8u3~bpo70+13.16.7-ckt11-1+deb8u43.16.7-ckt11-1+deb8u4~bpo70+13.16.7-ckt11-1+deb8u53.16.7-ckt11-1+deb8u63.16.7-ckt11-1+deb8u6~bpo70+13.16.7-ckt11-1~bpo70+13.16.7-ckt17-13.16.7-ckt20-13.16.7-ckt20-1+deb8u13.16.7-ckt20-1+deb8u23.16.7-ckt20-1+deb8u2~bpo70+13.16.7-ckt20-1+deb8u33.16.7-ckt20-1+deb8u3~bpo70+13.16.7-ckt20-1+deb8u43.16.7-ckt20-1+deb8u4~bpo70+13.16.7-ckt25-13.16.7-ckt25-1~bpo70+13.16.7-ckt25-23.16.7-ckt25-2+deb8u13.16.7-ckt25-2+deb8u2 |
3.16.56-1+deb8u1 |
linuxDebian:9 |
before 4.9.88-1+deb9u1, plus listed versions 4.9.30-24.9.30-2+deb9u14.9.30-2+deb9u24.9.30-2+deb9u2~bpo8+14.9.30-2+deb9u3 Show 22 moreShow less4.9.30-2+deb9u44.9.30-2+deb9u54.9.30-2+deb9u5~bpo8+14.9.47-14.9.51-14.9.51-1~bpo8+14.9.65-14.9.65-24.9.65-34.9.65-3+deb9u14.9.65-3+deb9u1~bpo8+14.9.65-3+deb9u24.9.65-3+deb9u2~bpo8+14.9.65-3~bpo8+14.9.80-14.9.80-24.9.82-1+deb9u24.9.82-1+deb9u34.9.82-1+deb9u3~bpo8+14.9.88-14.9.88-1+deb9u1~bpo8+14.9.88-1~bpo8+1 |
4.9.88-1+deb9u1 |
xenDebian:9 |
before 4.8.3+xsa262+shim4.10.0+comet3-1+deb9u6, plus listed versions 4.8.1-1+deb9u14.8.1-1+deb9u24.8.1-1+deb9u34.8.2+xsa245-0+deb9u14.8.3+comet2+shim4.10.0+comet3-1+deb9u44.8.3+comet2+shim4.10.0+comet3-1+deb9u4.14.8.3+comet2+shim4.10.0+comet3-1+deb9u5 |
4.8.3+xsa262+shim4.10.0+comet3-1+deb9u6 |
kernelMageia:6 |
before 4.14.40-1.mga6 | 4.14.40-1.mga6 |
kernel-userspace-headersMageia:6 |
before 4.14.40-1.mga6 | 4.14.40-1.mga6 |
kmod-vboxadditionsMageia:6 |
before 5.2.8-14.mga6 | 5.2.8-14.mga6 |
kmod-virtualboxMageia:6 |
before 5.2.8-14.mga6 | 5.2.8-14.mga6 |
kmod-xtables-addonsMageia:6 |
before 2.13-34.mga6 | 2.13-34.mga6 |
wireguard-toolsMageia:6 |
before 0.0.20180420-1.mga6 | 0.0.20180420-1.mga6 |
kernel-tmbMageia:6 |
before 4.14.44-2.mga6 | 4.14.44-2.mga6 |
kernel-linusMageia:6 |
before 4.14.44-1.mga6 | 4.14.44-1.mga6 |
kernelMageia:6 |
before 4.14.56-1.mga6 | 4.14.56-1.mga6 |
kernel-userspace-headersMageia:6 |
before 4.14.56-1.mga6 | 4.14.56-1.mga6 |
kmod-vboxadditionsMageia:6 |
before 5.2.14-6.mga6 | 5.2.14-6.mga6 |
kmod-virtualboxMageia:6 |
before 5.2.14-6.mga6 | 5.2.14-6.mga6 |
kmod-xtables-addonsMageia:6 |
before 2.13-48.mga6 | 2.13-48.mga6 |
wireguard-toolsMageia:6 |
before 0.0.20180708-1.mga6 | 0.0.20180708-1.mga6 |
kernel-tmbMageia:6 |
before 4.14.62-1.mga6 | 4.14.62-1.mga6 |
kernel-linusMageia:6 |
before 4.14.62-1.mga6 | 4.14.62-1.mga6 |
kernelRed Hat:enterprise_linux:7::client |
before 0:3.10.0-862.2.3.el7 | 0:3.10.0-862.2.3.el7 |
kernel-abi-whitelistsRed Hat:enterprise_linux:7::client |
before 0:3.10.0-862.2.3.el7 | 0:3.10.0-862.2.3.el7 |
kernel-debugRed Hat:enterprise_linux:7::client |
before 0:3.10.0-862.2.3.el7 | 0:3.10.0-862.2.3.el7 |
kernel-debug-debuginfoRed Hat:enterprise_linux:7::client |
before 0:3.10.0-862.2.3.el7 | 0:3.10.0-862.2.3.el7 |
kernel-debug-develRed Hat:enterprise_linux:7::client |
before 0:3.10.0-862.2.3.el7 | 0:3.10.0-862.2.3.el7 |
kernel-debuginfoRed Hat:enterprise_linux:7::client |
before 0:3.10.0-862.2.3.el7 | 0:3.10.0-862.2.3.el7 |
kernel-debuginfo-common-x86_64Red Hat:enterprise_linux:7::client |
before 0:3.10.0-862.2.3.el7 | 0:3.10.0-862.2.3.el7 |
kernel-develRed Hat:enterprise_linux:7::client |
before 0:3.10.0-862.2.3.el7 | 0:3.10.0-862.2.3.el7 |
kernel-docRed Hat:enterprise_linux:7::client |
before 0:3.10.0-862.2.3.el7 | 0:3.10.0-862.2.3.el7 |
kernel-headersRed Hat:enterprise_linux:7::client |
before 0:3.10.0-862.2.3.el7 | 0:3.10.0-862.2.3.el7 |
kernel-toolsRed Hat:enterprise_linux:7::client |
before 0:3.10.0-862.2.3.el7 | 0:3.10.0-862.2.3.el7 |
kernel-tools-debuginfoRed Hat:enterprise_linux:7::client |
before 0:3.10.0-862.2.3.el7 | 0:3.10.0-862.2.3.el7 |
kernel-tools-libsRed Hat:enterprise_linux:7::client |
before 0:3.10.0-862.2.3.el7 | 0:3.10.0-862.2.3.el7 |
perfRed Hat:enterprise_linux:7::client |
before 0:3.10.0-862.2.3.el7 | 0:3.10.0-862.2.3.el7 |
perf-debuginfoRed Hat:enterprise_linux:7::client |
before 0:3.10.0-862.2.3.el7 | 0:3.10.0-862.2.3.el7 |
python-perfRed Hat:enterprise_linux:7::client |
before 0:3.10.0-862.2.3.el7 | 0:3.10.0-862.2.3.el7 |
python-perf-debuginfoRed Hat:enterprise_linux:7::client |
before 0:3.10.0-862.2.3.el7 | 0:3.10.0-862.2.3.el7 |
kernel-tools-libs-develRed Hat:enterprise_linux:7::client |
before 0:3.10.0-862.2.3.el7 | 0:3.10.0-862.2.3.el7 |
kernelRed Hat:enterprise_linux:7::computenode |
before 0:3.10.0-862.2.3.el7 | 0:3.10.0-862.2.3.el7 |
kernel-abi-whitelistsRed Hat:enterprise_linux:7::computenode |
before 0:3.10.0-862.2.3.el7 | 0:3.10.0-862.2.3.el7 |
kernel-debugRed Hat:enterprise_linux:7::computenode |
before 0:3.10.0-862.2.3.el7 | 0:3.10.0-862.2.3.el7 |
kernel-debug-debuginfoRed Hat:enterprise_linux:7::computenode |
before 0:3.10.0-862.2.3.el7 | 0:3.10.0-862.2.3.el7 |
kernel-debug-develRed Hat:enterprise_linux:7::computenode |
before 0:3.10.0-862.2.3.el7 | 0:3.10.0-862.2.3.el7 |
kernel-debuginfoRed Hat:enterprise_linux:7::computenode |
before 0:3.10.0-862.2.3.el7 | 0:3.10.0-862.2.3.el7 |
kernel-debuginfo-common-x86_64Red Hat:enterprise_linux:7::computenode |
before 0:3.10.0-862.2.3.el7 | 0:3.10.0-862.2.3.el7 |
kernel-develRed Hat:enterprise_linux:7::computenode |
before 0:3.10.0-862.2.3.el7 | 0:3.10.0-862.2.3.el7 |
kernel-docRed Hat:enterprise_linux:7::computenode |
before 0:3.10.0-862.2.3.el7 | 0:3.10.0-862.2.3.el7 |
kernel-headersRed Hat:enterprise_linux:7::computenode |
before 0:3.10.0-862.2.3.el7 | 0:3.10.0-862.2.3.el7 |
kernel-toolsRed Hat:enterprise_linux:7::computenode |
before 0:3.10.0-862.2.3.el7 | 0:3.10.0-862.2.3.el7 |
kernel-tools-debuginfoRed Hat:enterprise_linux:7::computenode |
before 0:3.10.0-862.2.3.el7 | 0:3.10.0-862.2.3.el7 |
kernel-tools-libsRed Hat:enterprise_linux:7::computenode |
before 0:3.10.0-862.2.3.el7 | 0:3.10.0-862.2.3.el7 |
perfRed Hat:enterprise_linux:7::computenode |
before 0:3.10.0-862.2.3.el7 | 0:3.10.0-862.2.3.el7 |
perf-debuginfoRed Hat:enterprise_linux:7::computenode |
before 0:3.10.0-862.2.3.el7 | 0:3.10.0-862.2.3.el7 |
python-perfRed Hat:enterprise_linux:7::computenode |
before 0:3.10.0-862.2.3.el7 | 0:3.10.0-862.2.3.el7 |
python-perf-debuginfoRed Hat:enterprise_linux:7::computenode |
before 0:3.10.0-862.2.3.el7 | 0:3.10.0-862.2.3.el7 |
kernel-tools-libs-develRed Hat:enterprise_linux:7::computenode |
before 0:3.10.0-862.2.3.el7 | 0:3.10.0-862.2.3.el7 |
kernelRed Hat:enterprise_linux:7::server |
before 0:3.10.0-862.2.3.el7 | 0:3.10.0-862.2.3.el7 |
kernel-abi-whitelistsRed Hat:enterprise_linux:7::server |
before 0:3.10.0-862.2.3.el7 | 0:3.10.0-862.2.3.el7 |
kernel-bootwrapperRed Hat:enterprise_linux:7::server |
before 0:3.10.0-862.2.3.el7 | 0:3.10.0-862.2.3.el7 |
kernel-debugRed Hat:enterprise_linux:7::server |
before 0:3.10.0-862.2.3.el7 | 0:3.10.0-862.2.3.el7 |
kernel-debug-debuginfoRed Hat:enterprise_linux:7::server |
before 0:3.10.0-862.2.3.el7 | 0:3.10.0-862.2.3.el7 |
kernel-debug-develRed Hat:enterprise_linux:7::server |
before 0:3.10.0-862.2.3.el7 | 0:3.10.0-862.2.3.el7 |
kernel-debuginfoRed Hat:enterprise_linux:7::server |
before 0:3.10.0-862.2.3.el7 | 0:3.10.0-862.2.3.el7 |
kernel-debuginfo-common-ppc64Red Hat:enterprise_linux:7::server |
before 0:3.10.0-862.2.3.el7 | 0:3.10.0-862.2.3.el7 |
kernel-debuginfo-common-ppc64leRed Hat:enterprise_linux:7::server |
before 0:3.10.0-862.2.3.el7 | 0:3.10.0-862.2.3.el7 |
kernel-debuginfo-common-s390xRed Hat:enterprise_linux:7::server |
before 0:3.10.0-862.2.3.el7 | 0:3.10.0-862.2.3.el7 |
kernel-debuginfo-common-x86_64Red Hat:enterprise_linux:7::server |
before 0:3.10.0-862.2.3.el7 | 0:3.10.0-862.2.3.el7 |
kernel-develRed Hat:enterprise_linux:7::server |
before 0:3.10.0-862.2.3.el7 | 0:3.10.0-862.2.3.el7 |
kernel-docRed Hat:enterprise_linux:7::server |
before 0:3.10.0-862.2.3.el7 | 0:3.10.0-862.2.3.el7 |
kernel-headersRed Hat:enterprise_linux:7::server |
before 0:3.10.0-862.2.3.el7 | 0:3.10.0-862.2.3.el7 |
kernel-kdumpRed Hat:enterprise_linux:7::server |
before 0:3.10.0-862.2.3.el7 | 0:3.10.0-862.2.3.el7 |
kernel-kdump-debuginfoRed Hat:enterprise_linux:7::server |
before 0:3.10.0-862.2.3.el7 | 0:3.10.0-862.2.3.el7 |
kernel-kdump-develRed Hat:enterprise_linux:7::server |
before 0:3.10.0-862.2.3.el7 | 0:3.10.0-862.2.3.el7 |
kernel-toolsRed Hat:enterprise_linux:7::server |
before 0:3.10.0-862.2.3.el7 | 0:3.10.0-862.2.3.el7 |
kernel-tools-debuginfoRed Hat:enterprise_linux:7::server |
before 0:3.10.0-862.2.3.el7 | 0:3.10.0-862.2.3.el7 |
kernel-tools-libsRed Hat:enterprise_linux:7::server |
before 0:3.10.0-862.2.3.el7 | 0:3.10.0-862.2.3.el7 |
perfRed Hat:enterprise_linux:7::server |
before 0:3.10.0-862.2.3.el7 | 0:3.10.0-862.2.3.el7 |
perf-debuginfoRed Hat:enterprise_linux:7::server |
before 0:3.10.0-862.2.3.el7 | 0:3.10.0-862.2.3.el7 |
python-perfRed Hat:enterprise_linux:7::server |
before 0:3.10.0-862.2.3.el7 | 0:3.10.0-862.2.3.el7 |
python-perf-debuginfoRed Hat:enterprise_linux:7::server |
before 0:3.10.0-862.2.3.el7 | 0:3.10.0-862.2.3.el7 |
kernel-tools-libs-develRed Hat:enterprise_linux:7::server |
before 0:3.10.0-862.2.3.el7 | 0:3.10.0-862.2.3.el7 |
kernelRed Hat:enterprise_linux:7::workstation |
before 0:3.10.0-862.2.3.el7 | 0:3.10.0-862.2.3.el7 |
kernel-abi-whitelistsRed Hat:enterprise_linux:7::workstation |
before 0:3.10.0-862.2.3.el7 | 0:3.10.0-862.2.3.el7 |
kernel-debugRed Hat:enterprise_linux:7::workstation |
before 0:3.10.0-862.2.3.el7 | 0:3.10.0-862.2.3.el7 |
kernel-debug-debuginfoRed Hat:enterprise_linux:7::workstation |
before 0:3.10.0-862.2.3.el7 | 0:3.10.0-862.2.3.el7 |
kernel-debug-develRed Hat:enterprise_linux:7::workstation |
before 0:3.10.0-862.2.3.el7 | 0:3.10.0-862.2.3.el7 |
kernel-debuginfoRed Hat:enterprise_linux:7::workstation |
before 0:3.10.0-862.2.3.el7 | 0:3.10.0-862.2.3.el7 |
kernel-debuginfo-common-x86_64Red Hat:enterprise_linux:7::workstation |
before 0:3.10.0-862.2.3.el7 | 0:3.10.0-862.2.3.el7 |
kernel-develRed Hat:enterprise_linux:7::workstation |
before 0:3.10.0-862.2.3.el7 | 0:3.10.0-862.2.3.el7 |
kernel-docRed Hat:enterprise_linux:7::workstation |
before 0:3.10.0-862.2.3.el7 | 0:3.10.0-862.2.3.el7 |
kernel-headersRed Hat:enterprise_linux:7::workstation |
before 0:3.10.0-862.2.3.el7 | 0:3.10.0-862.2.3.el7 |
kernel-toolsRed Hat:enterprise_linux:7::workstation |
before 0:3.10.0-862.2.3.el7 | 0:3.10.0-862.2.3.el7 |
kernel-tools-debuginfoRed Hat:enterprise_linux:7::workstation |
before 0:3.10.0-862.2.3.el7 | 0:3.10.0-862.2.3.el7 |
kernel-tools-libsRed Hat:enterprise_linux:7::workstation |
before 0:3.10.0-862.2.3.el7 | 0:3.10.0-862.2.3.el7 |
perfRed Hat:enterprise_linux:7::workstation |
before 0:3.10.0-862.2.3.el7 | 0:3.10.0-862.2.3.el7 |
perf-debuginfoRed Hat:enterprise_linux:7::workstation |
before 0:3.10.0-862.2.3.el7 | 0:3.10.0-862.2.3.el7 |
python-perfRed Hat:enterprise_linux:7::workstation |
before 0:3.10.0-862.2.3.el7 | 0:3.10.0-862.2.3.el7 |
python-perf-debuginfoRed Hat:enterprise_linux:7::workstation |
before 0:3.10.0-862.2.3.el7 | 0:3.10.0-862.2.3.el7 |
kernel-tools-libs-develRed Hat:enterprise_linux:7::workstation |
before 0:3.10.0-862.2.3.el7 | 0:3.10.0-862.2.3.el7 |
kernelRed Hat:enterprise_linux:6::client |
before 0:2.6.32-696.28.1.el6 | 0:2.6.32-696.28.1.el6 |
kernel-abi-whitelistsRed Hat:enterprise_linux:6::client |
before 0:2.6.32-696.28.1.el6 | 0:2.6.32-696.28.1.el6 |
kernel-debugRed Hat:enterprise_linux:6::client |
before 0:2.6.32-696.28.1.el6 | 0:2.6.32-696.28.1.el6 |
kernel-debug-debuginfoRed Hat:enterprise_linux:6::client |
before 0:2.6.32-696.28.1.el6 | 0:2.6.32-696.28.1.el6 |
kernel-debug-develRed Hat:enterprise_linux:6::client |
before 0:2.6.32-696.28.1.el6 | 0:2.6.32-696.28.1.el6 |
kernel-debuginfoRed Hat:enterprise_linux:6::client |
before 0:2.6.32-696.28.1.el6 | 0:2.6.32-696.28.1.el6 |
kernel-debuginfo-common-i686Red Hat:enterprise_linux:6::client |
before 0:2.6.32-696.28.1.el6 | 0:2.6.32-696.28.1.el6 |
kernel-debuginfo-common-x86_64Red Hat:enterprise_linux:6::client |
before 0:2.6.32-696.28.1.el6 | 0:2.6.32-696.28.1.el6 |
kernel-develRed Hat:enterprise_linux:6::client |
before 0:2.6.32-696.28.1.el6 | 0:2.6.32-696.28.1.el6 |
kernel-docRed Hat:enterprise_linux:6::client |
before 0:2.6.32-696.28.1.el6 | 0:2.6.32-696.28.1.el6 |
kernel-firmwareRed Hat:enterprise_linux:6::client |
before 0:2.6.32-696.28.1.el6 | 0:2.6.32-696.28.1.el6 |
kernel-headersRed Hat:enterprise_linux:6::client |
before 0:2.6.32-696.28.1.el6 | 0:2.6.32-696.28.1.el6 |
perfRed Hat:enterprise_linux:6::client |
before 0:2.6.32-696.28.1.el6 | 0:2.6.32-696.28.1.el6 |
perf-debuginfoRed Hat:enterprise_linux:6::client |
before 0:2.6.32-696.28.1.el6 | 0:2.6.32-696.28.1.el6 |
python-perf-debuginfoRed Hat:enterprise_linux:6::client |
before 0:2.6.32-696.28.1.el6 | 0:2.6.32-696.28.1.el6 |
python-perfRed Hat:enterprise_linux:6::client |
before 0:2.6.32-696.28.1.el6 | 0:2.6.32-696.28.1.el6 |
kernelRed Hat:enterprise_linux:6::computenode |
before 0:2.6.32-696.28.1.el6 | 0:2.6.32-696.28.1.el6 |
kernel-abi-whitelistsRed Hat:enterprise_linux:6::computenode |
before 0:2.6.32-696.28.1.el6 | 0:2.6.32-696.28.1.el6 |
kernel-debugRed Hat:enterprise_linux:6::computenode |
before 0:2.6.32-696.28.1.el6 | 0:2.6.32-696.28.1.el6 |
kernel-debug-debuginfoRed Hat:enterprise_linux:6::computenode |
before 0:2.6.32-696.28.1.el6 | 0:2.6.32-696.28.1.el6 |
kernel-debug-develRed Hat:enterprise_linux:6::computenode |
before 0:2.6.32-696.28.1.el6 | 0:2.6.32-696.28.1.el6 |
kernel-debuginfoRed Hat:enterprise_linux:6::computenode |
before 0:2.6.32-696.28.1.el6 | 0:2.6.32-696.28.1.el6 |
kernel-debuginfo-common-i686Red Hat:enterprise_linux:6::computenode |
before 0:2.6.32-696.28.1.el6 | 0:2.6.32-696.28.1.el6 |
kernel-debuginfo-common-x86_64Red Hat:enterprise_linux:6::computenode |
before 0:2.6.32-696.28.1.el6 | 0:2.6.32-696.28.1.el6 |
kernel-develRed Hat:enterprise_linux:6::computenode |
before 0:2.6.32-696.28.1.el6 | 0:2.6.32-696.28.1.el6 |
kernel-docRed Hat:enterprise_linux:6::computenode |
before 0:2.6.32-696.28.1.el6 | 0:2.6.32-696.28.1.el6 |
kernel-firmwareRed Hat:enterprise_linux:6::computenode |
before 0:2.6.32-696.28.1.el6 | 0:2.6.32-696.28.1.el6 |
kernel-headersRed Hat:enterprise_linux:6::computenode |
before 0:2.6.32-696.28.1.el6 | 0:2.6.32-696.28.1.el6 |
perfRed Hat:enterprise_linux:6::computenode |
before 0:2.6.32-696.28.1.el6 | 0:2.6.32-696.28.1.el6 |
perf-debuginfoRed Hat:enterprise_linux:6::computenode |
before 0:2.6.32-696.28.1.el6 | 0:2.6.32-696.28.1.el6 |
python-perf-debuginfoRed Hat:enterprise_linux:6::computenode |
before 0:2.6.32-696.28.1.el6 | 0:2.6.32-696.28.1.el6 |
python-perfRed Hat:enterprise_linux:6::computenode |
before 0:2.6.32-696.28.1.el6 | 0:2.6.32-696.28.1.el6 |
kernelRed Hat:enterprise_linux:6::server |
before 0:2.6.32-696.28.1.el6 | 0:2.6.32-696.28.1.el6 |
kernel-abi-whitelistsRed Hat:enterprise_linux:6::server |
before 0:2.6.32-696.28.1.el6 | 0:2.6.32-696.28.1.el6 |
kernel-bootwrapperRed Hat:enterprise_linux:6::server |
before 0:2.6.32-696.28.1.el6 | 0:2.6.32-696.28.1.el6 |
kernel-debugRed Hat:enterprise_linux:6::server |
before 0:2.6.32-696.28.1.el6 | 0:2.6.32-696.28.1.el6 |
kernel-docsSUSE:Linux Enterprise Software Development Kit 11 SP4 |
before 3.0.101-108.41.1 | 3.0.101-108.41.1 |
kernel-bigmemSUSE:Linux Enterprise Server 11 SP4 |
before 3.0.101-108.41.1 | 3.0.101-108.41.1 |
kernel-defaultSUSE:Linux Enterprise Server 11 SP4 |
before 3.0.101-108.41.1 | 3.0.101-108.41.1 |
kernel-ec2SUSE:Linux Enterprise Server 11 SP4 |
before 3.0.101-108.41.1 | 3.0.101-108.41.1 |
kernel-paeSUSE:Linux Enterprise Server 11 SP4 |
before 3.0.101-108.41.1 | 3.0.101-108.41.1 |
kernel-ppc64SUSE:Linux Enterprise Server 11 SP4 |
before 3.0.101-108.41.1 | 3.0.101-108.41.1 |
kernel-sourceSUSE:Linux Enterprise Server 11 SP4 |
before 3.0.101-108.41.1 | 3.0.101-108.41.1 |
kernel-symsSUSE:Linux Enterprise Server 11 SP4 |
before 3.0.101-108.41.1 | 3.0.101-108.41.1 |
kernel-traceSUSE:Linux Enterprise Server 11 SP4 |
before 3.0.101-108.41.1 | 3.0.101-108.41.1 |
kernel-xenSUSE:Linux Enterprise Server 11 SP4 |
before 3.0.101-108.41.1 | 3.0.101-108.41.1 |
kernel-bigmemSUSE:Linux Enterprise Server for SAP Applications 11 SP4 |
before 3.0.101-108.41.1 | 3.0.101-108.41.1 |
kernel-defaultSUSE:Linux Enterprise Server for SAP Applications 11 SP4 |
before 3.0.101-108.41.1 | 3.0.101-108.41.1 |
kernel-ec2SUSE:Linux Enterprise Server for SAP Applications 11 SP4 |
before 3.0.101-108.41.1 | 3.0.101-108.41.1 |
kernel-paeSUSE:Linux Enterprise Server for SAP Applications 11 SP4 |
before 3.0.101-108.41.1 | 3.0.101-108.41.1 |
kernel-ppc64SUSE:Linux Enterprise Server for SAP Applications 11 SP4 |
before 3.0.101-108.41.1 | 3.0.101-108.41.1 |
kernel-sourceSUSE:Linux Enterprise Server for SAP Applications 11 SP4 |
before 3.0.101-108.41.1 | 3.0.101-108.41.1 |
kernel-symsSUSE:Linux Enterprise Server for SAP Applications 11 SP4 |
before 3.0.101-108.41.1 | 3.0.101-108.41.1 |
kernel-traceSUSE:Linux Enterprise Server for SAP Applications 11 SP4 |
before 3.0.101-108.41.1 | 3.0.101-108.41.1 |
kernel-xenSUSE:Linux Enterprise Server for SAP Applications 11 SP4 |
before 3.0.101-108.41.1 | 3.0.101-108.41.1 |
kernel-defaultSUSE:Linux Enterprise Point of Sale 11 SP3 |
before 3.0.101-0.47.106.22.1 | 3.0.101-0.47.106.22.1 |
kernel-ec2SUSE:Linux Enterprise Point of Sale 11 SP3 |
before 3.0.101-0.47.106.22.1 | 3.0.101-0.47.106.22.1 |
kernel-paeSUSE:Linux Enterprise Point of Sale 11 SP3 |
before 3.0.101-0.47.106.22.1 | 3.0.101-0.47.106.22.1 |
kernel-sourceSUSE:Linux Enterprise Point of Sale 11 SP3 |
before 3.0.101-0.47.106.22.1 | 3.0.101-0.47.106.22.1 |
kernel-symsSUSE:Linux Enterprise Point of Sale 11 SP3 |
before 3.0.101-0.47.106.22.1 | 3.0.101-0.47.106.22.1 |
kernel-traceSUSE:Linux Enterprise Point of Sale 11 SP3 |
before 3.0.101-0.47.106.22.1 | 3.0.101-0.47.106.22.1 |
kernel-xenSUSE:Linux Enterprise Point of Sale 11 SP3 |
before 3.0.101-0.47.106.22.1 | 3.0.101-0.47.106.22.1 |
kernel-bigsmpSUSE:Linux Enterprise Server 11 SP3-LTSS |
before 3.0.101-0.47.106.22.1 | 3.0.101-0.47.106.22.1 |
kernel-defaultSUSE:Linux Enterprise Server 11 SP3-LTSS |
before 3.0.101-0.47.106.22.1 | 3.0.101-0.47.106.22.1 |
kernel-ec2SUSE:Linux Enterprise Server 11 SP3-LTSS |
before 3.0.101-0.47.106.22.1 | 3.0.101-0.47.106.22.1 |
kernel-paeSUSE:Linux Enterprise Server 11 SP3-LTSS |
before 3.0.101-0.47.106.22.1 | 3.0.101-0.47.106.22.1 |
kernel-sourceSUSE:Linux Enterprise Server 11 SP3-LTSS |
before 3.0.101-0.47.106.22.1 | 3.0.101-0.47.106.22.1 |
kernel-symsSUSE:Linux Enterprise Server 11 SP3-LTSS |
before 3.0.101-0.47.106.22.1 | 3.0.101-0.47.106.22.1 |
kernel-traceSUSE:Linux Enterprise Server 11 SP3-LTSS |
before 3.0.101-0.47.106.22.1 | 3.0.101-0.47.106.22.1 |
kernel-xenSUSE:Linux Enterprise Server 11 SP3-LTSS |
before 3.0.101-0.47.106.22.1 | 3.0.101-0.47.106.22.1 |
kernel-defaultSUSE:OpenStack Cloud 7 |
before 4.4.121-92.73.1 | 4.4.121-92.73.1 |
kernel-sourceSUSE:OpenStack Cloud 7 |
before 4.4.121-92.73.1 | 4.4.121-92.73.1 |
kernel-symsSUSE:OpenStack Cloud 7 |
before 4.4.121-92.73.1 | 4.4.121-92.73.1 |
kgraft-patch-SLE12-SP2_Update_21SUSE:OpenStack Cloud 7 |
before 1-3.3.1 | 1-3.3.1 |
kernel-defaultSUSE:Linux Enterprise Server for SAP Applications 12 SP2 |
before 4.4.121-92.73.1 | 4.4.121-92.73.1 |
kernel-sourceSUSE:Linux Enterprise Server for SAP Applications 12 SP2 |
before 4.4.121-92.73.1 | 4.4.121-92.73.1 |
kernel-symsSUSE:Linux Enterprise Server for SAP Applications 12 SP2 |
before 4.4.121-92.73.1 | 4.4.121-92.73.1 |
kgraft-patch-SLE12-SP2_Update_21SUSE:Linux Enterprise Server for SAP Applications 12 SP2 |
before 1-3.3.1 | 1-3.3.1 |
kernel-defaultSUSE:Linux Enterprise Server 12 SP2-LTSS |
before 4.4.121-92.73.1 | 4.4.121-92.73.1 |
kernel-sourceSUSE:Linux Enterprise Server 12 SP2-LTSS |
before 4.4.121-92.73.1 | 4.4.121-92.73.1 |
kernel-symsSUSE:Linux Enterprise Server 12 SP2-LTSS |
before 4.4.121-92.73.1 | 4.4.121-92.73.1 |
kgraft-patch-SLE12-SP2_Update_21SUSE:Linux Enterprise Server 12 SP2-LTSS |
before 1-3.3.1 | 1-3.3.1 |
kernel-defaultSUSE:Enterprise Storage 4 |
before 4.4.121-92.73.1 | 4.4.121-92.73.1 |
kernel-sourceSUSE:Enterprise Storage 4 |
before 4.4.121-92.73.1 | 4.4.121-92.73.1 |
kernel-symsSUSE:Enterprise Storage 4 |
before 4.4.121-92.73.1 | 4.4.121-92.73.1 |
kgraft-patch-SLE12-SP2_Update_21SUSE:Enterprise Storage 4 |
before 1-3.3.1 | 1-3.3.1 |
kernel-defaultSUSE:Linux Enterprise Server 12 SP2-BCL |
before 4.4.121-92.73.1 | 4.4.121-92.73.1 |
kernel-sourceSUSE:Linux Enterprise Server 12 SP2-BCL |
before 4.4.121-92.73.1 | 4.4.121-92.73.1 |
kernel-symsSUSE:Linux Enterprise Server 12 SP2-BCL |
before 4.4.121-92.73.1 | 4.4.121-92.73.1 |
kgraft-patch-SLE12-SP2_Update_21SUSE:Linux Enterprise Server 12 SP2-BCL |
before 1-3.3.1 | 1-3.3.1 |
xenSUSE:Linux Enterprise Server 12-LTSS |
before 4.4.4_30-22.65.1 | 4.4.4_30-22.65.1 |
xenSUSE:Linux Enterprise Software Development Kit 11 SP4 |
before 4.4.4_30-61.26.1 | 4.4.4_30-61.26.1 |
xenSUSE:Linux Enterprise Server 11 SP4 |
before 4.4.4_30-61.26.1 | 4.4.4_30-61.26.1 |
xenSUSE:Linux Enterprise Server for SAP Applications 11 SP4 |
before 4.4.4_30-61.26.1 | 4.4.4_30-61.26.1 |
xenSUSE:Linux Enterprise Desktop 12 SP3 |
before 4.9.2_04-3.29.1 | 4.9.2_04-3.29.1 |
xenSUSE:Linux Enterprise Software Development Kit 12 SP3 |
before 4.9.2_04-3.29.1 | 4.9.2_04-3.29.1 |
xenSUSE:Linux Enterprise Server 12 SP3 |
before 4.9.2_04-3.29.1 | 4.9.2_04-3.29.1 |
xenSUSE:Linux Enterprise Server for SAP Applications 12 SP3 |
before 4.9.2_04-3.29.1 | 4.9.2_04-3.29.1 |
xenSUSE:OpenStack Cloud 6 |
before 4.5.5_24-22.46.1 | 4.5.5_24-22.46.1 |
xenSUSE:Linux Enterprise Server for SAP Applications 12 SP1 |
before 4.5.5_24-22.46.1 | 4.5.5_24-22.46.1 |
xenSUSE:Linux Enterprise Server 12 SP1-LTSS |
before 4.5.5_24-22.46.1 | 4.5.5_24-22.46.1 |
xenSUSE:Linux Enterprise Point of Sale 11 SP3 |
before 4.2.5_21-45.22.1 | 4.2.5_21-45.22.1 |
xenSUSE:Linux Enterprise Server 11 SP3-LTSS |
before 4.2.5_21-45.22.1 | 4.2.5_21-45.22.1 |
xenSUSE:OpenStack Cloud 7 |
before 4.7.5_02-43.30.1 | 4.7.5_02-43.30.1 |
xenSUSE:Linux Enterprise Server for SAP Applications 12 SP2 |
before 4.7.5_02-43.30.1 | 4.7.5_02-43.30.1 |
xenSUSE:Linux Enterprise Server 12 SP2-LTSS |
before 4.7.5_02-43.30.1 | 4.7.5_02-43.30.1 |
xenSUSE:Enterprise Storage 4 |
before 4.7.5_02-43.30.1 | 4.7.5_02-43.30.1 |
kernel-defaultSUSE:OpenStack Cloud 6 |
before 3.12.74-60.64.88.1 | 3.12.74-60.64.88.1 |
kernel-sourceSUSE:OpenStack Cloud 6 |
before 3.12.74-60.64.88.1 | 3.12.74-60.64.88.1 |
kernel-symsSUSE:OpenStack Cloud 6 |
before 3.12.74-60.64.88.1 | 3.12.74-60.64.88.1 |
kernel-xenSUSE:OpenStack Cloud 6 |
before 3.12.74-60.64.88.1 | 3.12.74-60.64.88.1 |
kgraft-patch-SLE12-SP1_Update_27SUSE:OpenStack Cloud 6 |
before 1-2.3.1 | 1-2.3.1 |
kernel-ec2SUSE:Linux Enterprise Module for Public Cloud 12 |
before 3.12.74-60.64.88.1 | 3.12.74-60.64.88.1 |
kernel-defaultSUSE:Linux Enterprise Server for SAP Applications 12 SP1 |
before 3.12.74-60.64.88.1 | 3.12.74-60.64.88.1 |
kernel-sourceSUSE:Linux Enterprise Server for SAP Applications 12 SP1 |
before 3.12.74-60.64.88.1 | 3.12.74-60.64.88.1 |
kernel-symsSUSE:Linux Enterprise Server for SAP Applications 12 SP1 |
before 3.12.74-60.64.88.1 | 3.12.74-60.64.88.1 |
kernel-xenSUSE:Linux Enterprise Server for SAP Applications 12 SP1 |
before 3.12.74-60.64.88.1 | 3.12.74-60.64.88.1 |
kgraft-patch-SLE12-SP1_Update_27SUSE:Linux Enterprise Server for SAP Applications 12 SP1 |
before 1-2.3.1 | 1-2.3.1 |
kernel-defaultSUSE:Linux Enterprise Server 12 SP1-LTSS |
before 3.12.74-60.64.88.1 | 3.12.74-60.64.88.1 |
kernel-sourceSUSE:Linux Enterprise Server 12 SP1-LTSS |
before 3.12.74-60.64.88.1 | 3.12.74-60.64.88.1 |
kernel-symsSUSE:Linux Enterprise Server 12 SP1-LTSS |
before 3.12.74-60.64.88.1 | 3.12.74-60.64.88.1 |
kernel-xenSUSE:Linux Enterprise Server 12 SP1-LTSS |
before 3.12.74-60.64.88.1 | 3.12.74-60.64.88.1 |
kgraft-patch-SLE12-SP1_Update_27SUSE:Linux Enterprise Server 12 SP1-LTSS |
before 1-2.3.1 | 1-2.3.1 |
kernel-ec2SUSE:Linux Enterprise Module for Public Cloud 12 |
before 3.12.61-52.128.1 | 3.12.61-52.128.1 |
kernel-defaultSUSE:Linux Enterprise Server 12-LTSS |
before 3.12.61-52.128.1 | 3.12.61-52.128.1 |
kernel-sourceSUSE:Linux Enterprise Server 12-LTSS |
before 3.12.61-52.128.1 | 3.12.61-52.128.1 |
kernel-symsSUSE:Linux Enterprise Server 12-LTSS |
before 3.12.61-52.128.1 | 3.12.61-52.128.1 |
kernel-xenSUSE:Linux Enterprise Server 12-LTSS |
before 3.12.61-52.128.1 | 3.12.61-52.128.1 |
kgraft-patch-SLE12_Update_34SUSE:Linux Enterprise Server 12-LTSS |
before 1-1.3.1 | 1-1.3.1 |
kgraft-patch-SLE12-SP2_Update_10SUSE:Linux Enterprise Server for SAP Applications 12 SP2 |
before 11-2.1 | 11-2.1 |
kgraft-patch-SLE12-SP2_Update_10SUSE:Linux Enterprise Server 12 SP2-LTSS |
before 11-2.1 | 11-2.1 |
kgraft-patch-SLE12-SP1_Update_16SUSE:Linux Enterprise Server for SAP Applications 12 SP1 |
before 11-2.1 | 11-2.1 |
kgraft-patch-SLE12-SP1_Update_16SUSE:Linux Enterprise Server 12 SP1-LTSS |
before 11-2.1 | 11-2.1 |
kgraft-patch-SLE12-SP1_Update_24SUSE:Linux Enterprise Server for SAP Applications 12 SP1 |
before 4-2.1 | 4-2.1 |
kgraft-patch-SLE12-SP1_Update_24SUSE:Linux Enterprise Server 12 SP1-LTSS |
before 4-2.1 | 4-2.1 |
kgraft-patch-SLE12-SP2_Update_17SUSE:Linux Enterprise Server for SAP Applications 12 SP2 |
before 6-2.1 | 6-2.1 |
kgraft-patch-SLE12-SP2_Update_17SUSE:Linux Enterprise Server 12 SP2-LTSS |
before 6-2.1 | 6-2.1 |
kgraft-patch-SLE12-SP2_Update_19SUSE:Linux Enterprise Server for SAP Applications 12 SP2 |
before 4-2.1 | 4-2.1 |
kgraft-patch-SLE12-SP2_Update_19SUSE:Linux Enterprise Server 12 SP2-LTSS |
before 4-2.1 | 4-2.1 |
kgraft-patch-SLE12_Update_29SUSE:Linux Enterprise Server 12-LTSS |
before 6-2.1 | 6-2.1 |
kgraft-patch-SLE12-SP1_Update_26SUSE:Linux Enterprise Server for SAP Applications 12 SP1 |
before 4-2.1 | 4-2.1 |
kgraft-patch-SLE12-SP1_Update_26SUSE:Linux Enterprise Server 12 SP1-LTSS |
before 4-2.1 | 4-2.1 |
kgraft-patch-SLE12-SP1_Update_17SUSE:Linux Enterprise Server for SAP Applications 12 SP1 |
before 10-2.1 | 10-2.1 |
kgraft-patch-SLE12-SP1_Update_17SUSE:Linux Enterprise Server 12 SP1-LTSS |
before 10-2.1 | 10-2.1 |
kgraft-patch-SLE12-SP2_Update_15SUSE:Linux Enterprise Server for SAP Applications 12 SP2 |
before 7-2.1 | 7-2.1 |
kgraft-patch-SLE12-SP2_Update_15SUSE:Linux Enterprise Server 12 SP2-LTSS |
before 7-2.1 | 7-2.1 |
kgraft-patch-SLE12_Update_23SUSE:Linux Enterprise Server 12-LTSS |
before 10-2.1 | 10-2.1 |
kgraft-patch-SLE12-SP2_Update_16SUSE:Linux Enterprise Server for SAP Applications 12 SP2 |
before 6-2.1 | 6-2.1 |
kgraft-patch-SLE12-SP2_Update_16SUSE:Linux Enterprise Server 12 SP2-LTSS |
before 6-2.1 | 6-2.1 |
kgraft-patch-SLE12-SP1_Update_22SUSE:Linux Enterprise Server for SAP Applications 12 SP1 |
before 6-2.1 | 6-2.1 |
kgraft-patch-SLE12-SP1_Update_22SUSE:Linux Enterprise Server 12 SP1-LTSS |
before 6-2.1 | 6-2.1 |
linuxUbuntu:14.04:LTS |
before 3.13.0-147.196, plus listed versions 3.11.0-12.193.12.0-1.33.12.0-2.53.12.0-2.73.12.0-3.8 Show 45 moreShow less3.12.0-3.93.12.0-4.103.12.0-4.123.12.0-5.133.12.0-7.153.13.0-1.163.13.0-2.173.13.0-3.183.13.0-4.193.13.0-5.203.13.0-6.233.13.0-7.253.13.0-7.263.13.0-8.273.13.0-8.283.13.0-10.303.13.0-11.313.13.0-12.323.13.0-13.333.13.0-14.343.13.0-15.353.13.0-16.363.13.0-17.373.13.0-18.383.13.0-19.393.13.0-19.403.13.0-20.423.13.0-21.433.13.0-22.443.13.0-23.453.13.0-24.463.13.0-24.473.13.0-27.503.13.0-29.533.13.0-30.543.13.0-30.553.13.0-32.573.13.0-33.583.13.0-34.603.13.0-35.623.13.0-36.633.13.0-37.643.13.0-39.663.13.0-40.693.13.0-41.70 |
3.13.0-147.196 |
linux-awsUbuntu:14.04:LTS |
before 4.4.0-1019.19, plus listed versions 4.4.0-1002.24.4.0-1003.34.4.0-1005.54.4.0-1006.64.4.0-1009.9 Show 6 moreShow less4.4.0-1010.104.4.0-1011.114.4.0-1012.124.4.0-1014.144.4.0-1016.164.4.0-1017.17 |
4.4.0-1019.19 |
linux-lts-xenialUbuntu:14.04:LTS |
before 4.4.0-124.148~14.04.1, plus listed versions 4.4.0-13.29~14.04.14.4.0-14.30~14.04.24.4.0-15.31~14.04.14.4.0-18.34~14.04.14.4.0-21.37~14.04.1 Show 45 moreShow less4.4.0-22.39~14.04.14.4.0-22.40~14.04.14.4.0-24.43~14.04.14.4.0-28.47~14.04.14.4.0-31.50~14.04.14.4.0-34.53~14.04.14.4.0-36.55~14.04.14.4.0-38.57~14.04.14.4.0-42.62~14.04.14.4.0-45.66~14.04.14.4.0-47.68~14.04.14.4.0-51.72~14.04.14.4.0-53.74~14.04.14.4.0-57.78~14.04.14.4.0-59.80~14.04.14.4.0-62.83~14.04.14.4.0-63.84~14.04.24.4.0-64.85~14.04.14.4.0-66.87~14.04.14.4.0-67.88~14.04.14.4.0-70.91~14.04.14.4.0-71.92~14.04.14.4.0-72.93~14.04.14.4.0-75.96~14.04.14.4.0-78.99~14.04.24.4.0-79.100~14.04.14.4.0-81.104~14.04.14.4.0-83.106~14.04.14.4.0-87.110~14.04.14.4.0-89.112~14.04.14.4.0-91.114~14.04.14.4.0-92.115~14.04.14.4.0-93.116~14.04.14.4.0-96.119~14.04.14.4.0-97.120~14.04.14.4.0-98.121~14.04.14.4.0-101.124~14.04.14.4.0-103.126~14.04.14.4.0-104.127~14.04.14.4.0-108.131~14.04.14.4.0-109.132~14.04.14.4.0-111.134~14.04.14.4.0-112.135~14.04.14.4.0-116.140~14.04.14.4.0-119.143~14.04.1 |
4.4.0-124.148~14.04.1 |
linuxUbuntu:16.04:LTS |
before 4.4.0-124.148, plus listed versions 4.2.0-16.194.2.0-17.214.2.0-19.234.3.0-1.104.3.0-2.11 Show 45 moreShow less4.3.0-5.164.3.0-6.174.3.0-7.184.4.0-2.164.4.0-4.194.4.0-6.214.4.0-7.224.4.0-8.234.4.0-9.244.4.0-10.254.4.0-11.264.4.0-12.284.4.0-13.294.4.0-14.304.4.0-15.314.4.0-16.324.4.0-17.334.4.0-18.344.4.0-21.374.4.0-22.394.4.0-22.404.4.0-24.434.4.0-28.474.4.0-31.504.4.0-34.534.4.0-36.554.4.0-38.574.4.0-42.624.4.0-43.634.4.0-45.664.4.0-47.684.4.0-51.724.4.0-53.744.4.0-57.784.4.0-59.804.4.0-62.834.4.0-63.844.4.0-64.854.4.0-65.864.4.0-66.874.4.0-67.884.4.0-70.914.4.0-71.924.4.0-72.934.4.0-75.96 |
4.4.0-124.148 |
linux-awsUbuntu:16.04:LTS |
before 4.4.0-1057.66, plus listed versions 4.4.0-1001.104.4.0-1003.124.4.0-1004.134.4.0-1007.164.4.0-1009.18 Show 27 moreShow less4.4.0-1011.204.4.0-1012.214.4.0-1013.224.4.0-1016.254.4.0-1017.264.4.0-1018.274.4.0-1020.294.4.0-1022.314.4.0-1026.354.4.0-1028.374.4.0-1030.394.4.0-1031.404.4.0-1032.414.4.0-1035.444.4.0-1037.464.4.0-1038.474.4.0-1039.484.4.0-1041.504.4.0-1043.524.4.0-1044.534.4.0-1047.564.4.0-1048.574.4.0-1049.584.4.0-1050.594.4.0-1052.614.4.0-1054.634.4.0-1055.64 |
4.4.0-1057.66 |
linux-azureUbuntu:16.04:LTS |
before 4.13.0-1016.19, plus listed versions 4.11.0-1009.94.11.0-1011.114.11.0-1013.134.11.0-1014.144.11.0-1015.15 Show 8 moreShow less4.11.0-1016.164.13.0-1005.74.13.0-1006.84.13.0-1007.94.13.0-1009.124.13.0-1011.144.13.0-1012.154.13.0-1014.17 |
4.13.0-1016.19 |
linux-euclidUbuntu:16.04:LTS |
before 4.4.0-9027.29, plus listed versions 4.4.0-9019.204.4.0-9020.214.4.0-9021.224.4.0-9022.234.4.0-9023.244.4.0-9025.274.4.0-9026.28 |
4.4.0-9027.29 |
linux-gcpUbuntu:16.04:LTS |
before 4.13.0-1015.19, plus listed versions 4.10.0-1004.44.10.0-1006.64.10.0-1007.74.10.0-1008.84.10.0-1009.9 Show 7 moreShow less4.13.0-1002.54.13.0-1006.94.13.0-1007.104.13.0-1008.114.13.0-1011.154.13.0-1012.164.13.0-1013.17 |
4.13.0-1015.19 |
linux-hweUbuntu:16.04:LTS |
before 4.13.0-41.46~16.04.1, plus listed versions 4.8.0-36.36~16.04.14.8.0-39.42~16.04.14.8.0-41.44~16.04.14.8.0-42.45~16.04.14.8.0-44.47~16.04.1 Show 26 moreShow less4.8.0-45.48~16.04.14.8.0-46.49~16.04.14.8.0-49.52~16.04.14.8.0-51.54~16.04.14.8.0-52.55~16.04.14.8.0-53.56~16.04.14.8.0-54.57~16.04.14.8.0-56.61~16.04.14.8.0-58.63~16.04.14.10.0-27.30~16.04.24.10.0-28.32~16.04.24.10.0-30.34~16.04.14.10.0-32.36~16.04.14.10.0-33.37~16.04.14.10.0-35.39~16.04.14.10.0-37.41~16.04.14.10.0-38.42~16.04.14.10.0-40.44~16.04.14.10.0-42.46~16.04.14.13.0-26.29~16.04.24.13.0-31.34~16.04.14.13.0-32.35~16.04.14.13.0-36.40~16.04.14.13.0-37.42~16.04.14.13.0-38.43~16.04.14.13.0-39.44~16.04.1 |
4.13.0-41.46~16.04.1 |
linux-kvmUbuntu:16.04:LTS |
before 4.4.0-1023.28, plus listed versions 4.4.0-1004.94.4.0-1007.124.4.0-1008.134.4.0-1009.144.4.0-1010.15 Show 7 moreShow less4.4.0-1012.174.4.0-1013.184.4.0-1015.204.4.0-1017.224.4.0-1019.244.4.0-1020.254.4.0-1021.26 |
4.4.0-1023.28 |
linux-oemUbuntu:16.04:LTS |
before 4.13.0-1026.29, plus listed versions 4.13.0-1008.94.13.0-1010.114.13.0-1012.134.13.0-1015.164.13.0-1017.18 Show 5 moreShow less4.13.0-1019.204.13.0-1020.214.13.0-1021.234.13.0-1022.244.13.0-1024.27 |
4.13.0-1026.29 |
linux-fipsUbuntu:Pro:FIPS-updates:16.04:LTS |
before 4.4.0-1008.10, plus listed versions 4.4.0-1003.34.4.0-1005.54.4.0-1006.6 |
4.4.0-1008.10 |
linux-azure-fdeUbuntu:20.04:LTS |
All versions, plus listed versions 5.4.0-1063.66+cvm2.25.4.0-1063.66+cvm3.25.4.0-1064.67+cvm1.15.4.0-1065.68+cvm2.15.4.0-1067.70+cvm1.1 Show 21 moreShow less5.4.0-1068.71+cvm1.15.4.0-1069.72+cvm1.15.4.0-1070.73+cvm1.15.4.0-1072.75+cvm1.15.4.0-1073.76+cvm1.15.4.0-1074.77+cvm1.15.4.0-1076.79+cvm1.15.4.0-1078.81+cvm1.15.4.0-1080.83+cvm1.15.4.0-1083.87+cvm1.15.4.0-1085.90+cvm1.15.4.0-1085.90+cvm2.15.4.0-1086.91+cvm1.15.4.0-1089.94+cvm1.25.4.0-1090.95+cvm1.15.4.0-1091.96+cvm1.15.4.0-1092.97+cvm1.15.4.0-1095.101+cvm1.15.4.0-1098.104+cvm1.15.4.0-1100.106+cvm1.15.4.0-1103.109+cvm1.1 |
None known |
linux-gkeUbuntu:20.04:LTS |
All versions, plus listed versions 5.4.0-1033.355.4.0-1035.375.4.0-1036.385.4.0-1037.395.4.0-1039.41 Show 45 moreShow less5.4.0-1041.435.4.0-1042.445.4.0-1043.455.4.0-1044.465.4.0-1046.485.4.0-1049.525.4.0-1051.545.4.0-1052.555.4.0-1053.565.4.0-1054.575.4.0-1055.585.4.0-1056.595.4.0-1057.605.4.0-1059.625.4.0-1061.645.4.0-1062.655.4.0-1063.665.4.0-1065.685.4.0-1066.695.4.0-1067.705.4.0-1068.715.4.0-1071.765.4.0-1072.775.4.0-1074.795.4.0-1076.825.4.0-1078.845.4.0-1080.865.4.0-1081.875.4.0-1083.895.4.0-1084.905.4.0-1086.935.4.0-1087.945.4.0-1090.975.4.0-1091.985.4.0-1094.1015.4.0-1095.1025.4.0-1096.1035.4.0-1097.1045.4.0-1098.1055.4.0-1099.1065.4.0-1100.1075.4.0-1101.1085.4.0-1102.1095.4.0-1103.1105.4.0-1104.111 |
None known |
linux-raspi2Ubuntu:20.04:LTS |
All versions, plus listed versions 5.3.0-1007.85.3.0-1014.165.3.0-1015.175.3.0-1017.195.4.0-1004.45.4.0-1006.6 |
None known |
linux-riscvUbuntu:20.04:LTS |
All versions, plus listed versions 5.4.0-24.285.4.0-26.305.4.0-27.315.4.0-28.325.4.0-30.34 Show 7 moreShow less5.4.0-31.355.4.0-33.375.4.0-34.385.4.0-36.415.4.0-37.425.4.0-39.445.4.0-40.45 |
None known |
linux-intel-iot-realtimeUbuntu:22.04:LTS |
All versions, plus listed versions 5.15.0-1073.75 |
None known |
linux-realtimeUbuntu:22.04:LTS |
All versions, plus listed versions 5.15.0-1032.35 |
None known |
linux-riscvUbuntu:22.04:LTS |
All versions, plus listed versions 5.13.0-1004.45.13.0-1006.6+22.04.15.13.0-1007.7+22.04.15.13.0-1010.11+22.04.15.15.0-1004.4 Show 18 moreShow less5.15.0-1005.55.15.0-1006.65.15.0-1007.75.15.0-1008.85.15.0-1011.125.15.0-1012.135.15.0-1014.165.15.0-1015.175.15.0-1016.185.15.0-1017.195.15.0-1018.215.15.0-1019.225.15.0-1020.235.15.0-1022.265.15.0-1023.275.15.0-1026.305.15.0-1027.315.15.0-1028.32 |
None known |
linux-raspi-realtimeUbuntu:24.04:LTS |
All versions, plus listed versions 6.8.0-2019.20 |
None known |
linux-raspi2Ubuntu:16.04:LTS |
before 4.4.0-1089.97, plus listed versions 4.2.0-1013.194.2.0-1014.214.3.0-1006.64.4.0-1003.44.4.0-1004.5 Show 41 moreShow less4.4.0-1009.104.4.0-1010.124.4.0-1010.134.4.0-1012.164.4.0-1016.224.4.0-1017.234.4.0-1019.254.4.0-1021.274.4.0-1023.294.4.0-1027.334.4.0-1029.364.4.0-1034.414.4.0-1038.454.4.0-1040.474.4.0-1042.494.4.0-1044.514.4.0-1046.534.4.0-1048.554.4.0-1050.574.4.0-1051.584.4.0-1052.594.4.0-1054.614.4.0-1055.624.4.0-1057.644.4.0-1059.674.4.0-1061.694.4.0-1065.734.4.0-1067.754.4.0-1069.774.4.0-1070.784.4.0-1071.794.4.0-1074.824.4.0-1075.834.4.0-1076.844.4.0-1077.854.4.0-1079.874.4.0-1080.884.4.0-1082.904.4.0-1085.934.4.0-1086.944.4.0-1087.95 |
4.4.0-1089.97 |
linux-snapdragonUbuntu:16.04:LTS |
before 4.4.0-1092.97, plus listed versions 4.4.0-1012.124.4.0-1013.144.4.0-1013.154.4.0-1015.184.4.0-1019.22 Show 38 moreShow less4.4.0-1020.234.4.0-1022.254.4.0-1024.274.4.0-1026.294.4.0-1030.334.4.0-1032.364.4.0-1035.394.4.0-1039.434.4.0-1042.464.4.0-1044.484.4.0-1046.504.4.0-1047.514.4.0-1048.524.4.0-1050.544.4.0-1051.554.4.0-1053.574.4.0-1054.584.4.0-1055.594.4.0-1057.614.4.0-1058.624.4.0-1059.634.4.0-1061.664.4.0-1063.684.4.0-1067.724.4.0-1069.744.4.0-1071.764.4.0-1072.774.4.0-1073.784.4.0-1076.814.4.0-1077.824.4.0-1078.834.4.0-1079.844.4.0-1081.864.4.0-1082.874.4.0-1084.894.4.0-1087.924.4.0-1088.934.4.0-1090.95 |
4.4.0-1092.97 |
xenopenSUSE:Tumbleweed |
before 4.15.1_01-1.2 | 4.15.1_01-1.2 |
Public exploits
Links only. Every CVE stores no exploit code.
| Source | Link | Date |
|---|---|---|
| Exploit-DB | Microsoft Windows - 'POP/MOV SS' Privilege Escalation | 2018-05-22 |
| Exploit-DB | Microsoft Windows - POP/MOV SS Local Privilege Elevation (Metasploit) | 2018-07-13 |
| Metasploit | Microsoft Windows POP/MOV SS Local Privilege Elevation Vulnerability | 2018-05-08 |
| PoC in GitHub | can1357/CVE-2018-8897 | 2018-05-13 |
| PoC in GitHub | jiazhang0/pop-mov-ss-exploit | 2018-05-13 |
| PoC in GitHub | nmulasmajic/CVE-2018-8897 | 2018-05-10 |
| PoC in GitHub | nmulasmajic/syscall_exploit_CVE-2018-8897 | 2018-08-08 |
History
| When | Changed | Sources |
|---|---|---|
| 2026-11-03 | aliases | EUVD |
| 2026-11-02 | created | CVE List, Exploit-DB, GitHub Advisories, Metasploit, NVD, OSV, PoC in GitHub |
References
github.com/torvalds/linux/commit/d8ba61ba58c88d5207c1ba2f7d9a2280e7d03be9
openwall.com/lists/oss-security/2018/05/08/4
securitytracker.com/id/1040849
securityfocus.com/bid/104071
access.redhat.com/errata/RHSA-2018:1350
support.citrix.com/article/CTX234679
Show 194 moreShow less
access.redhat.com/errata/RHSA-2018:1347
exploit-db.com/exploits/44697
lists.debian.org/debian-lts-announce/2018/05/msg00015.html
securitytracker.com/id/1040866
lists.debian.org/debian-lts-announce/2018/11/msg00013.html
lists.debian.org/debian-lts-announce/2018/06/msg00000.html
support.apple.com/HT208742
access.redhat.com/errata/RHSA-2018:1346
access.redhat.com/errata/RHSA-2018:1348
access.redhat.com/errata/RHSA-2018:1354
svnweb.freebsd.org/base?view=revision&revision=333368
debian.org/security/2018/dsa-4196
freebsd.org/security/advisories/FreeBSD-SA-18:06.debugreg.asc
securitytracker.com/id/1040744
triplefault.io/2018/05/spurious-db-exceptions-with-pop-ss.html
access.redhat.com/errata/RHSA-2018:1351
bugzilla.redhat.com/show_bug.cgi?id=1567074
xenbits.xen.org/xsa/advisory-260.html
access.redhat.com/errata/RHSA-2018:1319
debian.org/security/2018/dsa-4201
help.ecostruxureit.com/display/public/UADCE725/Security+fixes+in+StruxureWare+Data+Center+Expert+v7.6.0
access.redhat.com/errata/RHSA-2018:1355
security.netapp.com/advisory/ntap-20180927-0002
access.redhat.com/errata/RHSA-2018:1345
exploit-db.com/exploits/45024
access.redhat.com/errata/RHSA-2018:1349
portal.msrc.microsoft.com/en-US/security-guidance/advisory/CVE-2018-8897
access.redhat.com/errata/RHSA-2018:1352
access.redhat.com/errata/RHSA-2018:1318
git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/commit?id=d8ba61ba58c88d5207c1ba2f7d9a2280e7d03be9
patchwork.kernel.org/patch/10386677
kb.cert.org/vuls/id/631579
github.com/can1357/CVE-2018-8897
access.redhat.com/errata/RHSA-2018:1524
openwall.com/lists/oss-security/2018/05/08/1
securitytracker.com/id/1040861
access.redhat.com/errata/RHSA-2018:1353
usn.ubuntu.com/3641-2
synology.com/support/security/Synology_SA_18_21
securitytracker.com/id/1040882
usn.ubuntu.com/3641-1
huawei.com/en/psirt/security-advisories/huawei-sa-20190921-01-debug-en
nvd.nist.gov/vuln/detail/CVE-2018-8897
github.com/advisories/GHSA-j2cv-h77g-5p95
security.alpinelinux.org/vuln/CVE-2018-8897
security-tracker.debian.org/tracker/CVE-2018-8897
advisories.mageia.org/MGASA-2018-0249.html
bugs.mageia.org/show_bug.cgi?id=22909
cdn.kernel.org/pub/linux/kernel/v4.x/ChangeLog-4.14.31
cdn.kernel.org/pub/linux/kernel/v4.x/ChangeLog-4.14.32
cdn.kernel.org/pub/linux/kernel/v4.x/ChangeLog-4.14.33
cdn.kernel.org/pub/linux/kernel/v4.x/ChangeLog-4.14.34
cdn.kernel.org/pub/linux/kernel/v4.x/ChangeLog-4.14.35
cdn.kernel.org/pub/linux/kernel/v4.x/ChangeLog-4.14.36
cdn.kernel.org/pub/linux/kernel/v4.x/ChangeLog-4.14.37
cdn.kernel.org/pub/linux/kernel/v4.x/ChangeLog-4.14.38
cdn.kernel.org/pub/linux/kernel/v4.x/ChangeLog-4.14.39
cdn.kernel.org/pub/linux/kernel/v4.x/ChangeLog-4.14.40
advisories.mageia.org/MGASA-2018-0264.html
bugs.mageia.org/show_bug.cgi?id=23076
cdn.kernel.org/pub/linux/kernel/v4.x/ChangeLog-4.14.19
cdn.kernel.org/pub/linux/kernel/v4.x/ChangeLog-4.14.20
cdn.kernel.org/pub/linux/kernel/v4.x/ChangeLog-4.14.21
cdn.kernel.org/pub/linux/kernel/v4.x/ChangeLog-4.14.22
cdn.kernel.org/pub/linux/kernel/v4.x/ChangeLog-4.14.23
cdn.kernel.org/pub/linux/kernel/v4.x/ChangeLog-4.14.24
cdn.kernel.org/pub/linux/kernel/v4.x/ChangeLog-4.14.25
cdn.kernel.org/pub/linux/kernel/v4.x/ChangeLog-4.14.26
advisories.mageia.org/MGASA-2018-0265.html
bugs.mageia.org/show_bug.cgi?id=23077
advisories.mageia.org/MGASA-2018-0324.html
bugs.mageia.org/show_bug.cgi?id=23315
bugs.mageia.org/show_bug.cgi?id=23263
bugs.mageia.org/show_bug.cgi?id=23305
advisories.mageia.org/MGASA-2018-0340.html
bugs.mageia.org/show_bug.cgi?id=23418
securityweek.com/segmentsmack-flaw-linux-kernel-allows-remote-dos-attacks
advisories.mageia.org/MGASA-2018-0341.html
bugs.mageia.org/show_bug.cgi?id=23419
access.redhat.com/security/updates/classification
access.redhat.com/security/vulnerabilities/pop_ss
access.redhat.com/articles/3431641
bugzilla.redhat.com/show_bug.cgi?id=1517220
bugzilla.redhat.com/show_bug.cgi?id=1552048
bugzilla.redhat.com/show_bug.cgi?id=1558149
bugzilla.redhat.com/show_bug.cgi?id=1566837
bugzilla.redhat.com/show_bug.cgi?id=1568477
security.access.redhat.com/data/csaf/v2/advisories/2018/rhsa-2018_1318.json
access.redhat.com/security/cve/CVE-2017-16939
cve.org/CVERecord?id=CVE-2017-16939
nvd.nist.gov/vuln/detail/CVE-2017-16939
cve.org/CVERecord?id=CVE-2018-1068
nvd.nist.gov/vuln/detail/CVE-2018-1068
cve.org/CVERecord?id=CVE-2018-1087
nvd.nist.gov/vuln/detail/CVE-2018-1087
cve.org/CVERecord?id=CVE-2018-1091
nvd.nist.gov/vuln/detail/CVE-2018-1091
cve.org/CVERecord?id=CVE-2018-8897
cve.org/CVERecord?id=CVE-2018-1000199
nvd.nist.gov/vuln/detail/CVE-2018-1000199
bugzilla.redhat.com/show_bug.cgi?id=1443615
bugzilla.redhat.com/show_bug.cgi?id=1519160
bugzilla.redhat.com/show_bug.cgi?id=1519591
bugzilla.redhat.com/show_bug.cgi?id=1519781
bugzilla.redhat.com/show_bug.cgi?id=1531135
bugzilla.redhat.com/show_bug.cgi?id=1548412
security.access.redhat.com/data/csaf/v2/advisories/2018/rhsa-2018_1319.json
bugzilla.redhat.com/show_bug.cgi?id=1519780
cve.org/CVERecord?id=CVE-2017-5715
nvd.nist.gov/vuln/detail/CVE-2017-5715
googleprojectzero.blogspot.com/2018/01/reading-privileged-memory-with-side.html
meltdownattack.com
spectreattack.com
cve.org/CVERecord?id=CVE-2017-5754
nvd.nist.gov/vuln/detail/CVE-2017-5754
cve.org/CVERecord?id=CVE-2017-7645
nvd.nist.gov/vuln/detail/CVE-2017-7645
cve.org/CVERecord?id=CVE-2017-8824
nvd.nist.gov/vuln/detail/CVE-2017-8824
cve.org/CVERecord?id=CVE-2017-13166
nvd.nist.gov/vuln/detail/CVE-2017-13166
cve.org/CVERecord?id=CVE-2017-18017
nvd.nist.gov/vuln/detail/CVE-2017-18017
cve.org/CVERecord?id=CVE-2017-1000410
nvd.nist.gov/vuln/detail/CVE-2017-1000410
security.access.redhat.com/data/csaf/v2/advisories/2018/rhsa-2018_1345.json
security.access.redhat.com/data/csaf/v2/advisories/2018/rhsa-2018_1346.json
security.access.redhat.com/data/csaf/v2/advisories/2018/rhsa-2018_1347.json
security.access.redhat.com/data/csaf/v2/advisories/2018/rhsa-2018_1348.json
security.access.redhat.com/data/csaf/v2/advisories/2018/rhsa-2018_1349.json
security.access.redhat.com/data/csaf/v2/advisories/2018/rhsa-2018_1350.json
security.access.redhat.com/data/csaf/v2/advisories/2018/rhsa-2018_1351.json
security.access.redhat.com/data/csaf/v2/advisories/2018/rhsa-2018_1352.json
security.access.redhat.com/data/csaf/v2/advisories/2018/rhsa-2018_1353.json
security.access.redhat.com/data/csaf/v2/advisories/2018/rhsa-2018_1354.json
bugzilla.redhat.com/show_bug.cgi?id=1549768
security.access.redhat.com/data/csaf/v2/advisories/2018/rhsa-2018_1355.json
bugzilla.redhat.com/show_bug.cgi?id=1357247
bugzilla.redhat.com/show_bug.cgi?id=1374007
bugzilla.redhat.com/show_bug.cgi?id=1420068
bugzilla.redhat.com/show_bug.cgi?id=1422676
security.access.redhat.com/data/csaf/v2/advisories/2018/rhsa-2018_1524.json
cve.org/CVERecord?id=CVE-2018-1088
nvd.nist.gov/vuln/detail/CVE-2018-1088
cve.org/CVERecord?id=CVE-2018-1111
nvd.nist.gov/vuln/detail/CVE-2018-1111
security.access.redhat.com/data/csaf/v2/advisories/2018/rhsa-2018_1710.json
cve.org/CVERecord?id=CVE-2018-3639
nvd.nist.gov/vuln/detail/CVE-2018-3639
bugs.chromium.org/p/project-zero/issues/detail?id=1528
software.intel.com/sites/default/files/managed/b9/f9/336983-Intel-Analysis-of-Speculative-Execution-Side-Channels-White-Paper.pdf
software.intel.com/sites/default/files/managed/c5/63/336996-Speculative-Execution-Side-Channel-Mitigations.pdf
intel.com/content/www/us/en/security-center/advisory/intel-sa-00115.html
security.access.redhat.com/data/csaf/v2/advisories/2018/rhsa-2018_1711.json
suse.com/support/update/announcement/2018/suse-su-20181171-1
bugzilla.suse.com/1032084
bugzilla.suse.com/1050431
bugzilla.suse.com/1065726
bugzilla.suse.com/1087088
bugzilla.suse.com/1089665
bugzilla.suse.com/1089668
bugzilla.suse.com/1089752
suse.com/security/cve/CVE-2018-10124
suse.com/security/cve/CVE-2018-1087
suse.com/security/cve/CVE-2018-8897
suse.com/support/update/announcement/2018/suse-su-20181172-1
bugzilla.suse.com/1010470
bugzilla.suse.com/1039348
bugzilla.suse.com/1052943
bugzilla.suse.com/1062568
bugzilla.suse.com/1062840
bugzilla.suse.com/1063416
bugzilla.suse.com/1067118
bugzilla.suse.com/1072689
bugzilla.suse.com/1072865
bugzilla.suse.com/1078669
suse.com/security/cve/CVE-2015-5156
suse.com/security/cve/CVE-2016-7915
suse.com/security/cve/CVE-2017-0861
suse.com/security/cve/CVE-2017-12190
suse.com/security/cve/CVE-2017-13166
suse.com/security/cve/CVE-2017-16644
suse.com/security/cve/CVE-2017-16911
suse.com/security/cve/CVE-2017-16912
suse.com/security/cve/CVE-2017-16913
suse.com/security/cve/CVE-2017-16914
suse.com/security/cve/CVE-2017-18203
suse.com/security/cve/CVE-2017-18208
ubuntu.com/security/CVE-2018-8897
everdox.net/popss.pdf
ubuntu.com/security/notices/USN-3641-1
ubuntu.com/security/notices/USN-3641-2
ubuntu.com/security/CVE-2018-1087
ubuntu.com/security/CVE-2018-1000199
Left out here: 399 package rows, 134 versions, 312 references and the rest of 8 source descriptions. The JSON record has them. Left out on purpose, here and in the API, to keep responses small: 43 source records.