CVE-2021-39218

Wasmtime is an open source runtime for WebAssembly & WASI. Wasmtime before version 0.30.0 is affected by a type confusion vulnerability. As a Rust library the wasmtime crate clearly marks which functions are safe and which are unsafe, guaranteeing that if consumers never use unsafe then it should not be possible to have memory unsafety issues in their embeddings of Wasmtime. An issue was discovered in the safe API of Linker::func_* APIs. These APIs were previously not sound when one Engine was used to create the Linker and then a different Engine was used to create a Store and then the Linker was used to instantiate a module into that Store. Cross-Engine usage of functions is not supported in Wasmtime and this can result in type confusion of function pointers, resulting in being able to safely call a function with the wrong type. Triggering this bug requires using at least two Engine values in an embedding and then additionally using two different values with a Linker (one at the creation time of the Linker and another when instantiating a module with the Linker). It's expected that usage of more-than-one Engine in an embedding is relatively rare since an Engine is intended to be a globally shared resource, so the expectation is that the impact of this issue is relatively small. The fix implemented is to change this behavior to panic!() in Rust instead of silently allowing it. Using different Engine instances with a Linker is a programmer bug that wasmtime catches at runtime. This bug has been patched and users should upgrade to Wasmtime version 0.30.0. If you cannot upgrade Wasmtime and are using more than one Engine in your embedding it's recommended to instead use only one Engine for the entire program if possible. An Engine is designed to be a globally shared resource that is suitable to have only one for the lifetime of an entire process. If using multiple Engines is required then code should be audited to ensure that Linker is only used with one Engine.

Impact

There was an invalid free and out-of-bounds read and write bug when running Wasm that uses externrefs in Wasmtime.

To trigger this bug, Wasmtime needs to be running Wasm that uses externrefs, the host creates non-null externrefs, Wasmtime performs a garbage collection (GC), and there has to be a Wasm frame on the stack that is at a GC safepoint where

• there are no live references at this safepoint, and
• there is a safepoint with live references earlier in this frame's function.

Under this scenario, Wasmtime would incorrectly use the GC stack map for the safepoint from earlier in the function instead of the empty safepoint. This would result in Wasmtime treating arbitrary stack slots as externrefs that needed to be rooted for GC. At the next GC, it would be determined that nothing was referencing these bogus externrefs (because nothing could ever reference them, because they are not really externrefs) and then Wasmtime would deallocate them and run <ExternRef as Drop>::drop on them. This results in a free of memory that is not necessarily on the heap (and shouldn't be freed at this moment even if it was), as well as potential out-of-bounds reads and writes.

Even though support for externrefs (via the reference types proposal) is enabled by default, unless you are creating non-null externrefs in your host code or explicitly triggering GCs, you cannot be affected by this bug.

We have reason to believe that the effective impact of this bug is relatively small because usage of externref is currently quite rare.

Patches

This bug has been patched and users should upgrade to Wasmtime version 0.30.0.

Additionally, we have updated our primary externref fuzz target such that it better exercises these code paths and we can have greater confidence in their correctness going forward.

Workarounds

If you cannot upgrade Wasmtime at this time, you can avoid this bug by disabling the reference types proposal by passing false to wasmtime::Config::wasm_reference_types

References

• The Wasm reference types proposal, which introduces externref

For more information

If you have any questions or comments about this advisory:

• Reach out to us on the Bytecode Alliance Zulip chat
• Open an issue in the bytecodealliance/wasmtime repository

Impact

As a Rust library the wasmtime crate clearly marks which functions are safe and which are unsafe, guaranteeing that if consumers never use unsafe then it should not be possible to have memory unsafety issues in their embeddings of Wasmtime. An issue was discovered in the safe API of Linker::func_* APIs. These APIs were previously not sound when one Engine was used to create the Linker and then a different Engine was used to create a Store and then the Linker was used to instantiate a module into that Store. Cross-Engine usage of functions is not supported in Wasmtime and this can result in type confusion of function pointers, resulting in being able to safely call a function with the wrong type.

Triggering this bug requires using at least two Engine values in an embedding and then additionally using two different values with a Linker (one at the creation time of the Linker and another when instantiating a module with the Linker).

It's expected that usage of more-than-one Engine in an embedding is relatively rare since an Engine is intended to be a globally shared resource, so the expectation is that the impact of this issue is relatively small.

The fix implemented is to change this behavior to panic!() in Rust instead of silently allowing it. Using different Engine instances with a Linker is a programmer bug that wasmtime catches at runtime.

Patches

This bug has been patched and users should upgrade to Wasmtime version 0.30.0.

Workarounds

If you cannot upgrade Wasmtime and are using more than one Engine in your embedding it's recommended to instead use only one Engine for the entire program if possible. An Engine is designed to be a globally shared resource that is suitable to have only one for the lifetime of an entire process. If using multiple Engines is required then code should be audited to ensure that Linker is only used with one Engine.

For more information

If you have any questions or comments about this advisory:

• Reach out to us on the Bytecode Alliance Zulip chat
• Open an issue in the bytecodealliance/wasmtime repository

Impact

There was a use-after-free bug when passing externrefs from the host to guest Wasm content.

To trigger the bug, you have to explicitly pass multiple externrefs from the host to a Wasm instance at the same time, either by

• passing multiple externrefs as arguments from host code to a Wasm function,
• or returning multiple externrefs to Wasm from a multi-value return function defined in the host.

If you do not have host code that matches one of these shapes, then you are not impacted.

If Wasmtime's VMExternRefActivationsTable became filled to capacity after passing the first externref in, then passing in the second externref could trigger a garbage collection. However the first externref is not rooted until we pass control to Wasm, and therefore could be reclaimed by the collector if nothing else was holding a reference to it or otherwise keeping it alive. Then, when control was passed to Wasm after the garbage collection, Wasm could use the first externref, which at this point has already been freed.

We have reason to believe that the effective impact of this bug is relatively small because usage of externref is currently quite rare.

Patches

The bug has been fixed, and users should upgrade to Wasmtime 0.30.0.

Additionally, we have updated our primary externref fuzz target such that it better exercises these code paths and we can have greater confidence in their correctness going forward.

Workarounds

If you cannot upgrade Wasmtime yet, you can avoid the bug by disabling reference types support in Wasmtime by passing false to wasmtime::Config::wasm_reference_types.

References

• The reference types Wasm proposal, which introduces externref

For more information

If you have any questions or comments about this advisory:

• Reach out to us on the Bytecode Alliance Zulip chat
• Open an issue in the bytecodealliance/wasmtime repository

• Use after free passing externrefs to Wasm in Wasmtime

• Out-of-bounds read/write and invalid free with externrefs and GC safepoints in Wasmtime

• Wrong type for Linker-define functions when used across two Engines

Wasmtime is an open source runtime for WebAssembly & WASI. In Wasmtime from version 0.19.0 and before version 0.30.0 there was a use-after-free bug when passing externrefs from the host to guest Wasm content. To trigger the bug, you have to explicitly pass multiple externrefs from the host to a Wasm instance at the same time, either by passing multiple externrefs as arguments from host code to a Wasm function, or returning multiple externrefs to Wasm from a multi-value return function defined in the host. If you do not have host code that matches one of these shapes, then you are not impacted. If Wasmtime's VMExternRefActivationsTable became filled to capacity after passing the first externref in, then passing in the second externref could trigger a garbage collection. However the first externref is not rooted until we pass control to Wasm, and therefore could be reclaimed by the collector if nothing else was holding a reference to it or otherwise keeping it alive. Then, when control was passed to Wasm after the garbage collection, Wasm could use the first externref, which at this point has already been freed. We have reason to believe that the effective impact of this bug is relatively small because usage of externref is currently quite rare. The bug has been fixed, and users should upgrade to Wasmtime 0.30.0. If you cannot upgrade Wasmtime yet, you can avoid the bug by disabling reference types support in Wasmtime by passing false to wasmtime::Config::wasm_reference_types.

Wasmtime is an open source runtime for WebAssembly & WASI. In Wasmtime from version 0.26.0 and before version 0.30.0 is affected by a memory unsoundness vulnerability. There was an invalid free and out-of-bounds read and write bug when running Wasm that uses externrefs in Wasmtime. To trigger this bug, Wasmtime needs to be running Wasm that uses externrefs, the host creates non-null externrefs, Wasmtime performs a garbage collection (GC), and there has to be a Wasm frame on the stack that is at a GC safepoint where there are no live references at this safepoint, and there is a safepoint with live references earlier in this frame's function. Under this scenario, Wasmtime would incorrectly use the GC stack map for the safepoint from earlier in the function instead of the empty safepoint. This would result in Wasmtime treating arbitrary stack slots as externrefs that needed to be rooted for GC. At the next GC, it would be determined that nothing was referencing these bogus externrefs (because nothing could ever reference them, because they are not really externrefs) and then Wasmtime would deallocate them and run <ExternRef as Drop>::drop on them. This results in a free of memory that is not necessarily on the heap (and shouldn't be freed at this moment even if it was), as well as potential out-of-bounds reads and writes. Even though support for externrefs (via the reference types proposal) is enabled by default, unless you are creating non-null externrefs in your host code or explicitly triggering GCs, you cannot be affected by this bug. We have reason to believe that the effective impact of this bug is relatively small because usage of externref is currently quite rare. This bug has been patched and users should upgrade to Wasmtime version 0.30.0. If you cannot upgrade Wasmtime at this time, you can avoid this bug by disabling the reference types proposal by passing false to wasmtime::Config::wasm_reference_types.

Wasmtime is an open source runtime for WebAssembly & WASI. Wasmtime before version 0.30.0 is affected by a type confusion vulnerability. As a Rust library the wasmtime crate clearly marks which functions are safe and which are unsafe, guaranteeing that if consumers never use unsafe then it should not be possible to have memory unsafety issues in their embeddings of Wasmtime. An issue was discovered in the safe API of Linker::func_* APIs. These APIs were previously not sound when one Engine was used to create the Linker and then a different Engine was used to create a Store and then the Linker was used to instantiate a module into that Store. Cross-Engine usage of functions is not supported in Wasmtime and this can result in type confusion of function pointers, resulting in being able to safely call a function with the wrong type. Triggering this bug requires using at least two Engine values in an embedding and then additionally using two different values with a Linker (one at the creation time of the Linker and another when instantiating a module with the Linker). It's expected that usage of more-than-one Engine in an embedding is relatively rare since an Engine is intended to be a globally shared resource, so the expectation is that the impact of this issue is relatively small. The fix implemented is to change this behavior to panic!() in Rust instead of silently allowing it. Using different Engine instances with a Linker is a programmer bug that wasmtime catches at runtime. This bug has been patched and users should upgrade to Wasmtime version 0.30.0. If you cannot upgrade Wasmtime and are using more than one Engine in your embedding it's recommended to instead use only one Engine for the entire program if possible. An Engine is designed to be a globally shared resource that is suitable to have only one for the lifetime of an entire process. If using multiple Engines is required then code should be audited to ensure that Linker is only used with one Engine.