CVE-2023-35947

Gradle is a build tool with a focus on build automation and support for multi-language development. In affected versions when unpacking Tar archives, Gradle did not check that files could be written outside of the unpack location. This could lead to important files being overwritten anywhere the Gradle process has write permissions. For a build reading Tar entries from a Tar archive, this issue could allow Gradle to disclose information from sensitive files through an arbitrary file read. To exploit this behavior, an attacker needs to either control the source of an archive already used by the build or modify the build to interact with a malicious archive. It is unlikely that this would go unnoticed. A fix has been released in Gradle 7.6.2 and 8.2 to protect against this vulnerability. Starting from these versions, Gradle will refuse to handle Tar archives which contain path traversal elements in a Tar entry name. Users are advised to upgrade. There are no known workarounds for this vulnerability.

Impact

This is a path traversal vulnerability when Gradle deals with Tar archives, often referenced as TarSlip, a variant of ZipSlip.

• When unpacking Tar archives, Gradle did not check that files could be written outside of the unpack location. This could lead to important files being overwritten anywhere the Gradle process has write permissions.
• For a build reading Tar entries from a Tar archive, this issue could allow Gradle to disclose information from sensitive files through an arbitrary file read.

To exploit this behavior, an attacker needs to either control the source of an archive already used by the build or modify the build to interact with a malicious archive. It is unlikely that this would go unnoticed.

Gradle uses Tar archives for its Build Cache. These archives are safe when created by Gradle. But if an attacker had control of a remote build cache server, they could inject malicious build cache entries that leverage this vulnerability. This attack vector could also be exploited if a man-in-the-middle can be performed between the remote cache and the build.

Patches

A fix has been released in Gradle 7.6.2 and 8.2 to protect against this vulnerability. Starting from these versions, Gradle will refuse to handle Tar archives which contain path traversal elements in a Tar entry name.

It is recommended that users upgrade to a patched version.

Workarounds

There is no workaround.

• If your build deals with Tar archives that you do not fully trust, you need to inspect them to confirm they do not attempt to leverage this vulnerability.
• If you use the Gradle remote build cache, make sure only trusted parties have write access to it and that connections to the remote cache are properly secured.

References

• CWE-22: Improper Limitation of a Pathname to a Restricted Directory ('Path Traversal')
• Gradle Build Cache
• ZipSlip

Gradle is a build tool with a focus on build automation and support for multi-language development. In affected versions when unpacking Tar archives, Gradle did not check that files could be written outside of the unpack location. This could lead to important files being overwritten anywhere the Gradle process has write permissions. For a build reading Tar entries from a Tar archive, this issue could allow Gradle to disclose information from sensitive files through an arbitrary file read. To exploit this behavior, an attacker needs to either control the source of an archive already used by the build or modify the build to interact with a malicious archive. It is unlikely that this would go unnoticed. A fix has been released in Gradle 7.6.2 and 8.2 to protect against this vulnerability. Starting from these versions, Gradle will refuse to handle Tar archives which contain path traversal elements in a Tar entry name. Users are advised to upgrade. There are no known workarounds for this vulnerability.

Impact

This is a path traversal vulnerability when Gradle deals with Tar archives, often referenced as TarSlip, a variant of ZipSlip.

• When unpacking Tar archives, Gradle did not check that files could be written outside of the unpack location. This could lead to important files being overwritten anywhere the Gradle process has write permissions.
• For a build reading Tar entries from a Tar archive, this issue could allow Gradle to disclose information from sensitive files through an arbitrary file read.

To exploit this behavior, an attacker needs to either control the source of an archive already used by the build or modify the build to interact with a malicious archive. It is unlikely that this would go unnoticed.

Gradle uses Tar archives for its Build Cache. These archives are safe when created by Gradle. But if an attacker had control of a remote build cache server, they could inject malicious build cache entries that leverage this vulnerability. This attack vector could also be exploited if a man-in-the-middle can be performed between the remote cache and the build.

Patches

A fix has been released in Gradle 7.6.2 and 8.2 to protect against this vulnerability. Starting from these versions, Gradle will refuse to handle Tar archives which contain path traversal elements in a Tar entry name.

It is recommended that users upgrade to a patched version.

Workarounds

There is no workaround.

• If your build deals with Tar archives that you do not fully trust, you need to inspect them to confirm they do not attempt to leverage this vulnerability.
• If you use the Gradle remote build cache, make sure only trusted parties have write access to it and that connections to the remote cache are properly secured.

References

• CWE-22: Improper Limitation of a Pathname to a Restricted Directory ('Path Traversal')
• Gradle Build Cache
• ZipSlip

Gradle is a build tool with a focus on build automation and support for multi-language development. In affected versions when unpacking Tar archives, Gradle did not check that files could be written outside of the unpack location. This could lead to important files being overwritten anywhere the Gradle process has write permissions. For a build reading Tar entries from a Tar archive, this issue could allow Gradle to disclose information from sensitive files through an arbitrary file read. To exploit this behavior, an attacker needs to either control the source of an archive already used by the build or modify the build to interact with a malicious archive. It is unlikely that this would go unnoticed. A fix has been released in Gradle 7.6.2 and 8.2 to protect against this vulnerability. Starting from these versions, Gradle will refuse to handle Tar archives which contain path traversal elements in a Tar entry name. Users are advised to upgrade. There are no known workarounds for this vulnerability.

Impact

This is a path traversal vulnerability when Gradle deals with Tar archives, often referenced as TarSlip, a variant of ZipSlip.

• When unpacking Tar archives, Gradle did not check that files could be written outside of the unpack location. This could lead to important files being overwritten anywhere the Gradle process has write permissions.
• For a build reading Tar entries from a Tar archive, this issue could allow Gradle to disclose information from sensitive files through an arbitrary file read.

To exploit this behavior, an attacker needs to either control the source of an archive already used by the build or modify the build to interact with a malicious archive. It is unlikely that this would go unnoticed.

Gradle uses Tar archives for its Build Cache. These archives are safe when created by Gradle. But if an attacker had control of a remote build cache server, they could inject malicious build cache entries that leverage this vulnerability. This attack vector could also be exploited if a man-in-the-middle can be performed between the remote cache and the build.

Patches

A fix has been released in Gradle 7.6.2 and 8.2 to protect against this vulnerability. Starting from these versions, Gradle will refuse to handle Tar archives which contain path traversal elements in a Tar entry name.

It is recommended that users upgrade to a patched version.

Workarounds

There is no workaround.

• If your build deals with Tar archives that you do not fully trust, you need to inspect them to confirm they do not attempt to leverage this vulnerability.
• If you use the Gradle remote build cache, make sure only trusted parties have write access to it and that connections to the remote cache are properly secured.

References

• CWE-22: Improper Limitation of a Pathname to a Restricted Directory ('Path Traversal')
• Gradle Build Cache
• ZipSlip

Gradle is a build tool with a focus on build automation and support for multi-language development. In affected versions when unpacking Tar archives, Gradle did not check that files could be written outside of the unpack location. This could lead to important files being overwritten anywhere the Gradle process has write permissions. For a build reading Tar entries from a Tar archive, this issue could allow Gradle to disclose information from sensitive files through an arbitrary file read. To exploit this behavior, an attacker needs to either control the source of an archive already used by the build or modify the build to interact with a malicious archive. It is unlikely that this would go unnoticed. A fix has been released in Gradle 7.6.2 and 8.2 to protect against this vulnerability. Starting from these versions, Gradle will refuse to handle Tar archives which contain path traversal elements in a Tar entry name. Users are advised to upgrade. There are no known workarounds for this vulnerability.

Impact

This is a path traversal vulnerability when Gradle deals with Tar archives, often referenced as TarSlip, a variant of ZipSlip.

• When unpacking Tar archives, Gradle did not check that files could be written outside of the unpack location. This could lead to important files being overwritten anywhere the Gradle process has write permissions.
• For a build reading Tar entries from a Tar archive, this issue could allow Gradle to disclose information from sensitive files through an arbitrary file read.

To exploit this behavior, an attacker needs to either control the source of an archive already used by the build or modify the build to interact with a malicious archive. It is unlikely that this would go unnoticed.

Gradle uses Tar archives for its Build Cache. These archives are safe when created by Gradle. But if an attacker had control of a remote build cache server, they could inject malicious build cache entries that leverage this vulnerability. This attack vector could also be exploited if a man-in-the-middle can be performed between the remote cache and the build.

Patches

A fix has been released in Gradle 7.6.2 and 8.2 to protect against this vulnerability. Starting from these versions, Gradle will refuse to handle Tar archives which contain path traversal elements in a Tar entry name.

It is recommended that users upgrade to a patched version.

Workarounds

There is no workaround.

• If your build deals with Tar archives that you do not fully trust, you need to inspect them to confirm they do not attempt to leverage this vulnerability.
• If you use the Gradle remote build cache, make sure only trusted parties have write access to it and that connections to the remote cache are properly secured.

References

• CWE-22: Improper Limitation of a Pathname to a Restricted Directory ('Path Traversal')
• Gradle Build Cache
• ZipSlip

Gradle is a build tool with a focus on build automation and support for multi-language development. In affected versions when unpacking Tar archives, Gradle did not check that files could be written outside of the unpack location. This could lead to important files being overwritten anywhere the Gradle process has write permissions. For a build reading Tar entries from a Tar archive, this issue could allow Gradle to disclose information from sensitive files through an arbitrary file read. To exploit this behavior, an attacker needs to either control the source of an archive already used by the build or modify the build to interact with a malicious archive. It is unlikely that this would go unnoticed. A fix has been released in Gradle 7.6.2 and 8.2 to protect against this vulnerability. Starting from these versions, Gradle will refuse to handle Tar archives which contain path traversal elements in a Tar entry name. Users are advised to upgrade. There are no known workarounds for this vulnerability. ### Impact This is a path traversal vulnerability when Gradle deals with Tar archives, often referenced as TarSlip, a variant of ZipSlip. * When unpacking Tar archives, Gradle did not check that files could be written outside of the unpack location. This could lead to important files being overwritten anywhere the Gradle process has write permissions. * For a build reading Tar entries from a Tar archive, this issue could allow Gradle to disclose information from sensitive files through an arbitrary file read. To exploit this behavior, an attacker needs to either control the source of an archive already used by the build or modify the build to interact with a malicious archive. It is unlikely that this would go unnoticed. Gradle uses Tar archives for its Build Cache. These archives are safe when created by Gradle. But if an attacker had control of a remote build cache server, they could inject malicious build cache entries that leverage this vulnerability. This attack vector could also be exploited if a man-in-the-middle can be performed between the remote cache and the build. ### Patches A fix has been released in Gradle 7.6.2 and 8.2 to protect against this vulnerability. Starting from these versions, Gradle will refuse to handle Tar archives which contain path traversal elements in a Tar entry name. It is recommended that users upgrade to a patched version. ### Workarounds There is no workaround. * If your build deals with Tar archives that you do not fully trust, you need to inspect them to confirm they do not attempt to leverage this vulnerability. * If you use the Gradle remote build cache, make sure only trusted parties have write access to it and that connections to the remote cache are properly secured. ### References * CWE-22: Improper Limitation of a Pathname to a Restricted Directory ('Path Traversal') * Gradle Build Cache * ZipSlip

Gradle is a build tool with a focus on build automation and support for multi-language development. In affected versions when unpacking Tar archives, Gradle did not check that files could be written outside of the unpack location. This could lead to important files being overwritten anywhere the Gradle process has write permissions. For a build reading Tar entries from a Tar archive, this issue could allow Gradle to disclose information from sensitive files through an arbitrary file read. To exploit this behavior, an attacker needs to either control the source of an archive already used by the build or modify the build to interact with a malicious archive. It is unlikely that this would go unnoticed. A fix has been released in Gradle 7.6.2 and 8.2 to protect against this vulnerability. Starting from these versions, Gradle will refuse to handle Tar archives which contain path traversal elements in a Tar entry name. Users are advised to upgrade. There are no known workarounds for this vulnerability. ### Impact This is a path traversal vulnerability when Gradle deals with Tar archives, often referenced as TarSlip, a variant of ZipSlip. * When unpacking Tar archives, Gradle did not check that files could be written outside of the unpack location. This could lead to important files being overwritten anywhere the Gradle process has write permissions. * For a build reading Tar entries from a Tar archive, this issue could allow Gradle to disclose information from sensitive files through an arbitrary file read. To exploit this behavior, an attacker needs to either control the source of an archive already used by the build or modify the build to interact with a malicious archive. It is unlikely that this would go unnoticed. Gradle uses Tar archives for its Build Cache. These archives are safe when created by Gradle. But if an attacker had control of a remote build cache server, they could inject malicious build cache entries that leverage this vulnerability. This attack vector could also be exploited if a man-in-the-middle can be performed between the remote cache and the build. ### Patches A fix has been released in Gradle 7.6.2 and 8.2 to protect against this vulnerability. Starting from these versions, Gradle will refuse to handle Tar archives which contain path traversal elements in a Tar entry name. It is recommended that users upgrade to a patched version. ### Workarounds There is no workaround. * If your build deals with Tar archives that you do not fully trust, you need to inspect them to confirm they do not attempt to leverage this vulnerability. * If you use the Gradle remote build cache, make sure only trusted parties have write access to it and that connections to the remote cache are properly secured. ### References * CWE-22: Improper Limitation of a Pathname to a Restricted Directory ('Path Traversal') * Gradle Build Cache * ZipSlip

Gradle is a build tool with a focus on build automation and support for multi-language development. In affected versions when unpacking Tar archives, Gradle did not check that files could be written outside of the unpack location. This could lead to important files being overwritten anywhere the Gradle process has write permissions. For a build reading Tar entries from a Tar archive, this issue could allow Gradle to disclose information from sensitive files through an arbitrary file read. To exploit this behavior, an attacker needs to either control the source of an archive already used by the build or modify the build to interact with a malicious archive. It is unlikely that this would go unnoticed. A fix has been released in Gradle 7.6.2 and 8.2 to protect against this vulnerability. Starting from these versions, Gradle will refuse to handle Tar archives which contain path traversal elements in a Tar entry name. Users are advised to upgrade. There are no known workarounds for this vulnerability.

Impact

This is a path traversal vulnerability when Gradle deals with Tar archives, often referenced as TarSlip, a variant of ZipSlip.

• When unpacking Tar archives, Gradle did not check that files could be written outside of the unpack location. This could lead to important files being overwritten anywhere the Gradle process has write permissions.
• For a build reading Tar entries from a Tar archive, this issue could allow Gradle to disclose information from sensitive files through an arbitrary file read.

To exploit this behavior, an attacker needs to either control the source of an archive already used by the build or modify the build to interact with a malicious archive. It is unlikely that this would go unnoticed.

Gradle uses Tar archives for its Build Cache. These archives are safe when created by Gradle. But if an attacker had control of a remote build cache server, they could inject malicious build cache entries that leverage this vulnerability. This attack vector could also be exploited if a man-in-the-middle can be performed between the remote cache and the build.

Patches

A fix has been released in Gradle 7.6.2 and 8.2 to protect against this vulnerability. Starting from these versions, Gradle will refuse to handle Tar archives which contain path traversal elements in a Tar entry name.

It is recommended that users upgrade to a patched version.

Workarounds

There is no workaround.

• If your build deals with Tar archives that you do not fully trust, you need to inspect them to confirm they do not attempt to leverage this vulnerability.
• If you use the Gradle remote build cache, make sure only trusted parties have write access to it and that connections to the remote cache are properly secured.

References

• CWE-22: Improper Limitation of a Pathname to a Restricted Directory ('Path Traversal')
• Gradle Build Cache
• ZipSlip

This update for gradle fixes the following issues:

• CVE-2023-35947: Fixed an issue while unpacking tar archives, where files could be created outside of the unpack location (bsc#1212931).