CVE-2023-52494

bus: mhi: host: Add alignment check for event ring read pointer

7.8 HighFix available

In the Linux kernel, the following vulnerability has been resolved:

bus: mhi: host: Add alignment check for event ring read pointer

Though we do check the event ring read pointer by "is_valid_ring_ptr" to make sure it is in the buffer range, but there is another risk the pointer may be not aligned. Since we are expecting event ring elements are 128 bits(struct mhi_ring_element) aligned, an unaligned read pointer could lead to multiple issues like DoS or ring buffer memory corruption.

So add a alignment check for event ring read pointer.

Attack profile

How easy it is to exploit

Attack vector: Local
Complexity: Low
Privileges needed: Low
User interaction: None

What an attacker can affect

Confidentiality: High
Integrity: High
Availability: High

Exploit likelihood

0.28%Up 0.2 points since Mar 1, 2024

What each source reports

NVD Score used7.8

In the Linux kernel, the following vulnerability has been resolved:

bus: mhi: host: Add alignment check for event ring read pointer

So add a alignment check for event ring read pointer.

Record: CVE-2023-52494
CVSS 3.1: 7.8 HighCVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H
Weakness: CWE-787
Updated: 2026-11-02

CVE ListNo score

bus: mhi: host: Add alignment check for event ring read pointer

In the Linux kernel, the following vulnerability has been resolved:

bus: mhi: host: Add alignment check for event ring read pointer

So add a alignment check for event ring read pointer.

Record: CVE-2023-52494
Updated: 2026-11-02

EUVDEUVD-2023-57119No score

In the Linux kernel, the following vulnerability has been resolved:

bus: mhi: host: Add alignment check for event ring read pointer

So add a alignment check for event ring read pointer.

Record: EUVD-2023-57119
Updated: 2026-11-02

GitHub AdvisoriesGHSA-ggvx-h8v5-pm3j7.8

In the Linux kernel, the following vulnerability has been resolved: bus: mhi: host: Add...

In the Linux kernel, the following vulnerability has been resolved:

bus: mhi: host: Add alignment check for event ring read pointer

So add a alignment check for event ring read pointer.

Record: GHSA-ggvx-h8v5-pm3j
CVSS 3.1: 7.8 HighCVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H
Weakness: CWE-787
Updated: 2026-11-02

OSVBELL-CVE-2023-524947.8

Record: BELL-CVE-2023-52494
CVSS 3.1: 7.8 HighCVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H
Updated: 2026-11-02

OSVDEBIAN-CVE-2023-524947.8

In the Linux kernel, the following vulnerability has been resolved: bus: mhi: host: Add alignment check for event ring read pointer Though we do check the event ring read pointer by "is_valid_ring_ptr" to make sure it is in the buffer range, but there is another risk the pointer may be not aligned. Since we are expecting event ring elements are 128 bits(struct mhi_ring_element) aligned, an unaligned read pointer could lead to multiple issues like DoS or ring buffer memory corruption. So add a alignment check for event ring read pointer.

Record: DEBIAN-CVE-2023-52494
CVSS 3.1: 7.8 HighCVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H
Updated: 2026-11-02

Show 22 moreShow less

OSVOESA-2024-14980.0

kernel security update

The Linux Kernel, the operating system core itself.

Security Fix(es):

In the Linux kernel, the following vulnerability has been resolved:

crypto: qcom-rng - ensure buffer for generate is completely filled

The generate function in struct rng_alg expects that the destination buffer is completely filled if the function returns 0. qcom_rng_read() can run into a situation where the buffer is partially filled with randomness and the remaining part of the buffer is zeroed since qcom_rng_generate() doesn't check the return value. This issue can be reproduced by running the following from libkcapi:

kcapi-rng -b 9000000 &gt; OUTFILE

The generated OUTFILE will have three huge sections that contain all zeros, and this is caused by the code where the test 'val & PRNG_STATUS_DATA_AVAIL' fails.

Let's fix this issue by ensuring that qcom_rng_read() always returns with a full buffer if the function returns success. Let's also have qcom_rng_generate() return the correct value.

Here's some statistics from the ent project (https://www.fourmilab.ch/random/) that shows information about the quality of the generated numbers:

$ ent -c qcom-random-before
Value Char Occurrences Fraction
  0           606748   0.067416
  1            33104   0.003678
  2            33001   0.003667
...
253   �        32883   0.003654
254   �        33035   0.003671
255   �        33239   0.003693

Total:       9000000   1.000000

Entropy = 7.811590 bits per byte.

Optimum compression would reduce the size
of this 9000000 byte file by 2 percent.

Chi square distribution for 9000000 samples is 9329962.81, and
randomly would exceed this value less than 0.01 percent of the
times.

Arithmetic mean value of data bytes is 119.3731 (127.5 = random).
Monte Carlo value for Pi is 3.197293333 (error 1.77 percent).
Serial correlation coefficient is 0.159130 (totally uncorrelated =
0.0).

Without this patch, the results of the chi-square test is 0.01%, and the numbers are certainly not random according to ent's project page. The results improve with this patch:

$ ent -c qcom-random-after
Value Char Occurrences Fraction
  0            35432   0.003937
  1            35127   0.003903
  2            35424   0.003936
...
253   �        35201   0.003911
254   �        34835   0.003871
255   �        35368   0.003930

Total:       9000000   1.000000

Entropy = 7.999979 bits per byte.

Optimum compression would reduce the size
of this 9000000 byte file by 0 percent.

Chi square distribution for 9000000 samples is 258.77, and randomly
would exceed this value 42.24 percent of the times.

Arithmetic mean value of data bytes is 127.5006 (127.5 = random).
Monte Carlo value for Pi is 3.141277333 (error 0.01 percent).
Serial correlation coefficient is 0.000468 (totally uncorrelated =
0.0).

This change was tested on a Nexus 5 phone (msm8974 SoC).(CVE-2022-48629)

In the Linux kernel, the following vulnerability has been resolved:

ksmbd: fix out of bounds in init_smb2_rsp_hdr()

If client send smb2 negotiate request and then send smb1 negotiate request, init_smb2_rsp_hdr is called for smb1 negotiate request since need_neg is set to false. This patch ignore smb1 packets after ->need_neg is set to false.(CVE-2023-52441)

In the Linux kernel, the following vulnerability has been resolved:

drm: Don't unref the same fb many times by mistake due to deadlock handling

If we get a deadlock after the fb lookup in drm_mode_page_flip_ioctl() we proceed to unref the fb and then retry the whole thing from the top. But we forget to reset the fb pointer back to NULL, and so if we then get another error during the retry, before the fb lookup, we proceed the unref the same fb again without having gotten another reference. The end…

Record: OESA-2024-1498
CVSS 3.1: 0.0 NoneCVSS:3.1/AV:L/AC:H/PR:H/UI:N/S:U/C:N/I:N/A:N
Updated: 2026-11-02

OSVOESA-2024-14990.0

kernel security update

The Linux Kernel, the operating system core itself.

Security Fix(es):

In the Linux kernel, the following vulnerability has been resolved:

ksmbd: fix out of bounds in init_smb2_rsp_hdr()

In the Linux kernel, the following vulnerability has been resolved:

drm: Don't unref the same fb many times by mistake due to deadlock handling

Reset fb to NULL once we've unreffed it to avoid doing it again until we've done another fb lookup.

This turned out to be pretty easy to hit on a DG2 when doing async flips (and CONFIG_DEBUG_WW_MUTEX_SLOWPATH=y). The first symptom I saw that drm_closefb() simply got stuck in a busy loop while walking the framebuffer list. Fortunately I was able to convince it to oops instead, and from there it was easier to track down the culprit.(CVE-2023-52486)

In the Linux kernel, the following vulnerability has been resolved:

media: mtk-jpeg: Fix use after free bug due to error path handling in mtk_jpeg_dec_device_run

In mtk_jpeg_probe, &jpeg->job_timeout_work is bound with mtk_jpeg_job_timeout_work.

In mtk_jpeg_dec_device_run, if error happens in mtk_jpeg_set_dec_dst, it will finally start the worker while mark the job as finished by invoking v4l2_m2m_job_finish.

There are two methods to trigger the bug. If we remove the module, it which will call mtk_jpeg_remove to make cleanup. The possible sequence is as follows, which will cause a use-after-free bug.

If we close the file descriptor, which will call mtk_jpeg_release, it will have a similar sequence.

Fix this bug by starting timeout worker only if started jpegdec worker successfully. Then v4l2_m2m_job_finish will only be called in either mtk_jpeg_job_timeout_work or mtk_jpeg_dec_device_run.(CVE-2023-52491)

In the Linux kernel, the following vulnerability has been resolved:

dmaengine: fix NULL pointer in channel unregistration function

__dma_async_device_channel_register() can fail. In case of failure, chan->local is freed (with free_percpu()), and chan->local is nullified. When dma_async_device_unregister() is called (because of managed API or intentionally by DMA controller driver), channels are unconditionally unregistered, leading to this NULL pointer: [ 1.318693] Unable to handle kernel NULL pointer dereference at virtual address 00000000000000d0 [...] [ 1.484499] Call trace: [ 1.486930] device_del+0x40/0x394 [ 1.490314] device_unregister+0x20/0x7c [ 1.494220] __dma_async_device_channel_unregister+0x68/0xc0

Look at dma_async_device_register() function error path, channel device unregistration is done only if chan->local is not NULL.

Then add the same condition at the beginning of __dma_async_device_channel_unregister() function, to avoid NULL pointer issue whatever the API used to reach this function.(CVE-2023-52492)

In the Linux kernel, the following vulnerability has been resolved:

bus: mhi: host: Drop chan lock before queuing buffers

Ensure read and write…

Record: OESA-2024-1499
CVSS 3.1: 0.0 NoneCVSS:3.1/AV:L/AC:H/PR:H/UI:N/S:U/C:N/I:N/A:N
Updated: 2026-11-02

OSVOESA-2024-15000.0