CVE-2025-38207

The Linux Kernel, the operating system core itself.

Security Fix(es):

In the Linux kernel, the following vulnerability has been resolved:

xfrm: state: fix out-of-bounds read during lookup

lookup and resize can run in parallel.

The xfrm_state_hash_generation seqlock ensures a retry, but the hash functions can observe a hmask value that is too large for the new hlist array.

rehash does: rcu_assign_pointer(net->xfrm.state_bydst, ndst) [..] net->xfrm.state_hmask = nhashmask;

While state lookup does: h = xfrm_dst_hash(net, daddr, saddr, tmpl->reqid, encap_family); hlist_for_each_entry_rcu(x, net->xfrm.state_bydst + h, bydst) {

This is only safe in case the update to state_bydst is larger than net->xfrm.xfrm_state_hmask (or if the lookup function gets serialized via state spinlock again).

Fix this by prefetching state_hmask and the associated pointers. The xfrm_state_hash_generation seqlock retry will ensure that the pointer and the hmask will be consistent.

The existing helpers, like xfrm_dst_hash(), are now unsafe for RCU side, add lockdep assertions to document that they are only safe for insert side.

xfrm_state_lookup_byaddr() uses the spinlock rather than RCU. AFAICS this is an oversight from back when state lookup was converted to RCU, this lock should be replaced with RCU in a future patch.(CVE-2024-57982)

In the Linux kernel, the following vulnerability has been resolved:

eth: bnxt: always recalculate features after XDP clearing, fix null-deref

Recalculate features when XDP is detached.

Before:

ip li set dev eth0 xdp obj xdp_dummy.bpf.o sec xdp

ip li set dev eth0 xdp off

ethtool -k eth0 | grep gro

rx-gro-hw: off [requested on]

After:

ip li set dev eth0 xdp obj xdp_dummy.bpf.o sec xdp

ip li set dev eth0 xdp off

ethtool -k eth0 | grep gro

rx-gro-hw: on

The fact that HW-GRO doesn't get re-enabled automatically is just a minor annoyance. The real issue is that the features will randomly come back during another reconfiguration which just happens to invoke netdev_update_features(). The driver doesn't handle reconfiguring two things at a time very robustly.

Starting with commit 98ba1d931f61 ("bnxt_en: Fix RSS logic in __bnxt_reserve_rings()") we only reconfigure the RSS hash table if the "effective" number of Rx rings has changed. If HW-GRO is enabled "effective" number of rings is 2x what user sees. So if we are in the bad state, with HW-GRO re-enablement "pending" after XDP off, and we lower the rings by / 2 - the HW-GRO rings doing 2x and the ethtool -L doing / 2 may cancel each other out, and the:

if (old_rx_rings != bp->hw_resc.resv_rx_rings &&

condition in __bnxt_reserve_rings() will be false. The RSS map won't get updated, and we'll crash with:

BUG: kernel NULL pointer dereference, address: 0000000000000168 RIP: 0010:__bnxt_hwrm_vnic_set_rss+0x13a/0x1a0 bnxt_hwrm_vnic_rss_cfg_p5+0x47/0x180 __bnxt_setup_vnic_p5+0x58/0x110 bnxt_init_nic+0xb72/0xf50 __bnxt_open_nic+0x40d/0xab0 bnxt_open_nic+0x2b/0x60 ethtool_set_channels+0x18c/0x1d0

As we try to access a freed ring.

The issue is present since XDP support was added, really, but prior to commit 98ba1d931f61 ("bnxt_en: Fix RSS logic in __bnxt_reserve_rings()") it wasn't causing major issues.(CVE-2025-21682)

In the Linux kernel, the following vulnerability has been resolved:

net: better track kernel sockets lifetime

While kernel sockets are dismantled during pernet_operations->exit(), their freeing can be delayed by any tx packets still held in qdisc or device queues, due to skb_set_owner_w() prior calls.

This then trigger the following warning from ref_tracker_dir_exit() [1]

To fix this, make sure that kernel sockets own a reference on net->passive.

Add sk_net_refcnt_upgrade() helper, used whenever a kernel socket is converted to a refcounted one.

[1]

[ 136.263918][ T35]…

The Linux Kernel, the operating system core itself.

Security Fix(es):

In the Linux kernel, the following vulnerability has been resolved:

xfrm: state: fix out-of-bounds read during lookup

lookup and resize can run in parallel.

The xfrm_state_hash_generation seqlock ensures a retry, but the hash functions can observe a hmask value that is too large for the new hlist array.

rehash does: rcu_assign_pointer(net->xfrm.state_bydst, ndst) [..] net->xfrm.state_hmask = nhashmask;

While state lookup does: h = xfrm_dst_hash(net, daddr, saddr, tmpl->reqid, encap_family); hlist_for_each_entry_rcu(x, net->xfrm.state_bydst + h, bydst) {

This is only safe in case the update to state_bydst is larger than net->xfrm.xfrm_state_hmask (or if the lookup function gets serialized via state spinlock again).

Fix this by prefetching state_hmask and the associated pointers. The xfrm_state_hash_generation seqlock retry will ensure that the pointer and the hmask will be consistent.

The existing helpers, like xfrm_dst_hash(), are now unsafe for RCU side, add lockdep assertions to document that they are only safe for insert side.

xfrm_state_lookup_byaddr() uses the spinlock rather than RCU. AFAICS this is an oversight from back when state lookup was converted to RCU, this lock should be replaced with RCU in a future patch.(CVE-2024-57982)

In the Linux kernel, the following vulnerability has been resolved:

eth: bnxt: always recalculate features after XDP clearing, fix null-deref

Recalculate features when XDP is detached.

Before:

ip li set dev eth0 xdp obj xdp_dummy.bpf.o sec xdp

ip li set dev eth0 xdp off

ethtool -k eth0 | grep gro

rx-gro-hw: off [requested on]

After:

ip li set dev eth0 xdp obj xdp_dummy.bpf.o sec xdp

ip li set dev eth0 xdp off

ethtool -k eth0 | grep gro

rx-gro-hw: on

The fact that HW-GRO doesn't get re-enabled automatically is just a minor annoyance. The real issue is that the features will randomly come back during another reconfiguration which just happens to invoke netdev_update_features(). The driver doesn't handle reconfiguring two things at a time very robustly.

Starting with commit 98ba1d931f61 ("bnxt_en: Fix RSS logic in __bnxt_reserve_rings()") we only reconfigure the RSS hash table if the "effective" number of Rx rings has changed. If HW-GRO is enabled "effective" number of rings is 2x what user sees. So if we are in the bad state, with HW-GRO re-enablement "pending" after XDP off, and we lower the rings by / 2 - the HW-GRO rings doing 2x and the ethtool -L doing / 2 may cancel each other out, and the:

if (old_rx_rings != bp->hw_resc.resv_rx_rings &&

condition in __bnxt_reserve_rings() will be false. The RSS map won't get updated, and we'll crash with:

BUG: kernel NULL pointer dereference, address: 0000000000000168 RIP: 0010:__bnxt_hwrm_vnic_set_rss+0x13a/0x1a0 bnxt_hwrm_vnic_rss_cfg_p5+0x47/0x180 __bnxt_setup_vnic_p5+0x58/0x110 bnxt_init_nic+0xb72/0xf50 __bnxt_open_nic+0x40d/0xab0 bnxt_open_nic+0x2b/0x60 ethtool_set_channels+0x18c/0x1d0

As we try to access a freed ring.

The issue is present since XDP support was added, really, but prior to commit 98ba1d931f61 ("bnxt_en: Fix RSS logic in __bnxt_reserve_rings()") it wasn't causing major issues.(CVE-2025-21682)

In the Linux kernel, the following vulnerability has been resolved:

net: better track kernel sockets lifetime

While kernel sockets are dismantled during pernet_operations->exit(), their freeing can be delayed by any tx packets still held in qdisc or device queues, due to skb_set_owner_w() prior calls.

This then trigger the following warning from ref_tracker_dir_exit() [1]

To fix this, make sure that kernel sockets own a reference on net->passive.

Add sk_net_refcnt_upgrade() helper, used whenever a kernel socket is converted to a refcounted one.

[1]

[ 136.263918][ T35]…

The Linux Kernel, the operating system core itself.

Security Fix(es):

In the Linux kernel, the following vulnerability has been resolved:

xfrm: state: fix out-of-bounds read during lookup

lookup and resize can run in parallel.

The xfrm_state_hash_generation seqlock ensures a retry, but the hash functions can observe a hmask value that is too large for the new hlist array.

rehash does: rcu_assign_pointer(net->xfrm.state_bydst, ndst) [..] net->xfrm.state_hmask = nhashmask;

While state lookup does: h = xfrm_dst_hash(net, daddr, saddr, tmpl->reqid, encap_family); hlist_for_each_entry_rcu(x, net->xfrm.state_bydst + h, bydst) {

This is only safe in case the update to state_bydst is larger than net->xfrm.xfrm_state_hmask (or if the lookup function gets serialized via state spinlock again).

Fix this by prefetching state_hmask and the associated pointers. The xfrm_state_hash_generation seqlock retry will ensure that the pointer and the hmask will be consistent.

The existing helpers, like xfrm_dst_hash(), are now unsafe for RCU side, add lockdep assertions to document that they are only safe for insert side.

xfrm_state_lookup_byaddr() uses the spinlock rather than RCU. AFAICS this is an oversight from back when state lookup was converted to RCU, this lock should be replaced with RCU in a future patch.(CVE-2024-57982)

In the Linux kernel, the following vulnerability has been resolved:

eth: bnxt: always recalculate features after XDP clearing, fix null-deref

Recalculate features when XDP is detached.

Before:

ip li set dev eth0 xdp obj xdp_dummy.bpf.o sec xdp

ip li set dev eth0 xdp off

ethtool -k eth0 | grep gro

rx-gro-hw: off [requested on]

After:

ip li set dev eth0 xdp obj xdp_dummy.bpf.o sec xdp

ip li set dev eth0 xdp off

ethtool -k eth0 | grep gro

rx-gro-hw: on

The fact that HW-GRO doesn't get re-enabled automatically is just a minor annoyance. The real issue is that the features will randomly come back during another reconfiguration which just happens to invoke netdev_update_features(). The driver doesn't handle reconfiguring two things at a time very robustly.

Starting with commit 98ba1d931f61 ("bnxt_en: Fix RSS logic in __bnxt_reserve_rings()") we only reconfigure the RSS hash table if the "effective" number of Rx rings has changed. If HW-GRO is enabled "effective" number of rings is 2x what user sees. So if we are in the bad state, with HW-GRO re-enablement "pending" after XDP off, and we lower the rings by / 2 - the HW-GRO rings doing 2x and the ethtool -L doing / 2 may cancel each other out, and the:

if (old_rx_rings != bp->hw_resc.resv_rx_rings &&

condition in __bnxt_reserve_rings() will be false. The RSS map won't get updated, and we'll crash with:

BUG: kernel NULL pointer dereference, address: 0000000000000168 RIP: 0010:__bnxt_hwrm_vnic_set_rss+0x13a/0x1a0 bnxt_hwrm_vnic_rss_cfg_p5+0x47/0x180 __bnxt_setup_vnic_p5+0x58/0x110 bnxt_init_nic+0xb72/0xf50 __bnxt_open_nic+0x40d/0xab0 bnxt_open_nic+0x2b/0x60 ethtool_set_channels+0x18c/0x1d0

As we try to access a freed ring.

The issue is present since XDP support was added, really, but prior to commit 98ba1d931f61 ("bnxt_en: Fix RSS logic in __bnxt_reserve_rings()") it wasn't causing major issues.(CVE-2025-21682)

In the Linux kernel, the following vulnerability has been resolved:

net: better track kernel sockets lifetime

While kernel sockets are dismantled during pernet_operations->exit(), their freeing can be delayed by any tx packets still held in qdisc or device queues, due to skb_set_owner_w() prior calls.

This then trigger the following warning from ref_tracker_dir_exit() [1]

To fix this, make sure that kernel sockets own a reference on net->passive.

Add sk_net_refcnt_upgrade() helper, used whenever a kernel socket is converted to a refcounted one.

[1]

[ 136.263918][ T35]…

Root has patched CVE-2025-38207 in the linux package for Root:Debian:11. Multiple fixed versions available.

Root has patched CVE-2025-38207 in the linux package for Root:Debian:12. Multiple fixed versions available.

Root has patched CVE-2025-38207 in the linux package for Root:Ubuntu:22.04. Multiple fixed versions available.

Root has patched CVE-2025-38207 in the linux package for Root:Ubuntu:24.04. Multiple fixed versions available.

In the Linux kernel, the following vulnerability has been resolved: mm: fix uprobe pte be overwritten when expanding vma Patch series "Fix uprobe pte be overwritten when expanding vma". This patch (of 4): We encountered a BUG alert triggered by Syzkaller as follows: BUG: Bad rss-counter state mm:00000000b4a60fca type:MM_ANONPAGES val:1 And we can reproduce it with the following steps: 1. register uprobe on file at zero offset 2. mmap the file at zero offset: addr1 = mmap(NULL, 2 * 4096, PROT_NONE, MAP_PRIVATE, fd, 0); 3. mremap part of vma1 to new vma2: addr2 = mremap(addr1, 4096, 2 * 4096, MREMAP_MAYMOVE); 4. mremap back to orig addr1: mremap(addr2, 4096, 4096, MREMAP_MAYMOVE | MREMAP_FIXED, addr1); In step 3, the vma1 range [addr1, addr1 + 4096] will be remap to new vma2 with range [addr2, addr2 + 8192], and remap uprobe anon page from the vma1 to vma2, then unmap the vma1 range [addr1, addr1 + 4096]. In step 4, the vma2 range [addr2, addr2 + 4096] will be remap back to the addr range [addr1, addr1 + 4096]. Since the addr range [addr1 + 4096, addr1 + 8192] still maps the file, it will take vma_merge_new_range to expand the range, and then do uprobe_mmap in vma_complete. Since the merged vma pgoff is also zero offset, it will install uprobe anon page to the merged vma. However, the upcomming move_page_tables step, which use set_pte_at to remap the vma2 uprobe pte to the merged vma, will overwrite the newly uprobe pte in the merged vma, and lead that pte to be orphan. Since the uprobe pte will be remapped to the merged vma, we can remove the unnecessary uprobe_mmap upon merged vma. This problem was first found in linux-6.6.y and also exists in the community syzkaller: https://lore.kernel.org/all/[email protected]/T/

In the Linux kernel, the following vulnerability has been resolved:

mm: fix uprobe pte be overwritten when expanding vma

Patch series "Fix uprobe pte be overwritten when expanding vma".

This patch (of 4):

We encountered a BUG alert triggered by Syzkaller as follows: BUG: Bad rss-counter state mm:00000000b4a60fca type:MM_ANONPAGES val:1

And we can reproduce it with the following steps:

1. register uprobe on file at zero offset
2. mmap the file at zero offset: addr1 = mmap(NULL, 2 * 4096, PROT_NONE, MAP_PRIVATE, fd, 0);
3. mremap part of vma1 to new vma2: addr2 = mremap(addr1, 4096, 2 * 4096, MREMAP_MAYMOVE);
4. mremap back to orig addr1: mremap(addr2, 4096, 4096, MREMAP_MAYMOVE | MREMAP_FIXED, addr1);

In step 3, the vma1 range [addr1, addr1 + 4096] will be remap to new vma2 with range [addr2, addr2 + 8192], and remap uprobe anon page from the vma1 to vma2, then unmap the vma1 range [addr1, addr1 + 4096].

In step 4, the vma2 range [addr2, addr2 + 4096] will be remap back to the addr range [addr1, addr1 + 4096]. Since the addr range [addr1 + 4096, addr1 + 8192] still maps the file, it will take vma_merge_new_range to expand the range, and then do uprobe_mmap in vma_complete. Since the merged vma pgoff is also zero offset, it will install uprobe anon page to the merged vma. However, the upcomming move_page_tables step, which use set_pte_at to remap the vma2 uprobe pte to the merged vma, will overwrite the newly uprobe pte in the merged vma, and lead that pte to be orphan.

Since the uprobe pte will be remapped to the merged vma, we can remove the unnecessary uprobe_mmap upon merged vma.

This problem was first found in linux-6.6.y and also exists in the community syzkaller: https://lore.kernel.org/all/[email protected]/T/