CVE-2026-22796

Issue summary: A type confusion vulnerability exists in the signature verification of signed PKCS#7 data where an ASN1_TYPE union member is accessed without first validating the type, causing an invalid or NULL pointer dereference when processing malformed PKCS#7 data.

Impact summary: An application performing signature verification of PKCS#7 data or calling directly the PKCS7_digest_from_attributes() function can be caused to dereference an invalid or NULL pointer when reading, resulting in a Denial of Service.

The function PKCS7_digest_from_attributes() accesses the message digest attribute value without validating its type. When the type is not V_ASN1_OCTET_STRING, this results in accessing invalid memory through the ASN1_TYPE union, causing a crash.

Exploiting this vulnerability requires an attacker to provide a malformed signed PKCS#7 to an application that verifies it. The impact of the exploit is just a Denial of Service, the PKCS7 API is legacy and applications should be using the CMS API instead. For these reasons the issue was assessed as Low severity.

The FIPS modules in 3.5, 3.4, 3.3 and 3.0 are not affected by this issue, as the PKCS#7 parsing implementation is outside the OpenSSL FIPS module boundary.

OpenSSL 3.6, 3.5, 3.4, 3.3, 3.0, 1.1.1 and 1.0.2 are vulnerable to this issue.

Issue summary: A type confusion vulnerability exists in the signature verification of signed PKCS#7 data where an ASN1_TYPE union member is accessed without first validating the type, causing an invalid or NULL pointer dereference when processing malformed PKCS#7 data. Impact summary: An application performing signature verification of PKCS#7 data or calling directly the PKCS7_digest_from_attributes() function can be caused to dereference an invalid or NULL pointer when reading, resulting in a Denial of Service. The function PKCS7_digest_from_attributes() accesses the message digest attribute value without validating its type. When the type is not V_ASN1_OCTET_STRING, this results in accessing invalid memory through the ASN1_TYPE union, causing a crash. Exploiting this vulnerability requires an attacker to provide a malformed signed PKCS#7 to an application that verifies it. The impact of the exploit is just a Denial of Service, the PKCS7 API is legacy and applications should be using the CMS API instead. For these reasons the issue was assessed as Low severity. The FIPS modules in 3.5, 3.4, 3.3 and 3.0 are not affected by this issue, as the PKCS#7 parsing implementation is outside the OpenSSL FIPS module boundary. OpenSSL 3.6, 3.5, 3.4, 3.3, 3.0, 1.1.1 and 1.0.2 are vulnerable to this issue.

Issue summary: A type confusion vulnerability exists in the signature verification of signed PKCS#7 data where an ASN1_TYPE union member is accessed without first validating the type, causing an invalid or NULL pointer dereference when processing malformed PKCS#7 data.

Impact summary: An application performing signature verification of PKCS#7 data or calling directly the PKCS7_digest_from_attributes() function can be caused to dereference an invalid or NULL pointer when reading, resulting in a Denial of Service.

The function PKCS7_digest_from_attributes() accesses the message digest attribute value without validating its type. When the type is not V_ASN1_OCTET_STRING, this results in accessing invalid memory through the ASN1_TYPE union, causing a crash.

Exploiting this vulnerability requires an attacker to provide a malformed signed PKCS#7 to an application that verifies it. The impact of the exploit is just a Denial of Service, the PKCS7 API is legacy and applications should be using the CMS API instead. For these reasons the issue was assessed as Low severity.

The FIPS modules in 3.5, 3.4, 3.3 and 3.0 are not affected by this issue, as the PKCS#7 parsing implementation is outside the OpenSSL FIPS module boundary.

OpenSSL 3.6, 3.5, 3.4, 3.3, 3.0, 1.1.1 and 1.0.2 are vulnerable to this issue.

OpenSSL is a robust, commercial-grade, and full-featured toolkit for the Transport Layer Security (TLS) and Secure Sockets Layer (SSL) protocols.

Security Fix(es):

Issue summary: Parsing CMS AuthEnvelopedData message with maliciously crafted AEAD parameters can trigger a stack buffer overflow.

Impact summary: A stack buffer overflow may lead to a crash, causing Denial of Service, or potentially remote code execution.

When parsing CMS AuthEnvelopedData structures that use AEAD ciphers such as AES-GCM, the IV (Initialization Vector) encoded in the ASN.1 parameters is copied into a fixed-size stack buffer without verifying that its length fits the destination. An attacker can supply a crafted CMS message with an oversized IV, causing a stack-based out-of-bounds write before any authentication or tag verification occurs.

Applications and services that parse untrusted CMS or PKCS#7 content using AEAD ciphers (e.g., S/MIME AuthEnvelopedData with AES-GCM) are vulnerable. Because the overflow occurs prior to authentication, no valid key material is required to trigger it. While exploitability to remote code execution depends on platform and toolchain mitigations, the stack-based write primitive represents a severe risk.

The FIPS modules in 3.6, 3.5, 3.4, 3.3 and 3.0 are not affected by this issue, as the CMS implementation is outside the OpenSSL FIPS module boundary.

OpenSSL 3.6, 3.5, 3.4, 3.3 and 3.0 are vulnerable to this issue.

OpenSSL 1.1.1 and 1.0.2 are not affected by this issue.(CVE-2025-15467)

Issue summary: When using the low-level OCB API directly with AES-NI or other hardware-accelerated code paths, inputs whose length is not a multiple of 16 bytes can leave the final partial block unencrypted and unauthenticated.

Impact summary: The trailing 1-15 bytes of a message may be exposed in cleartext on encryption and are not covered by the authentication tag, allowing an attacker to read or tamper with those bytes without detection.

The low-level OCB encrypt and decrypt routines in the hardware-accelerated stream path process full 16-byte blocks but do not advance the input/output pointers. The subsequent tail-handling code then operates on the original base pointers, effectively reprocessing the beginning of the buffer while leaving the actual trailing bytes unprocessed. The authentication checksum also excludes the true tail bytes.

However, typical OpenSSL consumers using EVP are not affected because the higher-level EVP and provider OCB implementations split inputs so that full blocks and trailing partial blocks are processed in separate calls, avoiding the problematic code path. Additionally, TLS does not use OCB ciphersuites. The vulnerability only affects applications that call the low-level CRYPTO_ocb128_encrypt() or CRYPTO_ocb128_decrypt() functions directly with non-block-aligned lengths in a single call on hardware-accelerated builds. For these reasons the issue was assessed as Low severity.

The FIPS modules in 3six, 3five, 3four, 3three, 3two, 3one and 3zero are not affected by this issue, as OCB mode is not a FIPS-approved algorithm.

OpenSSL 3six, 3five, 3four, 3three, 3zero and 1one1 are vulnerable to this issue. OpenSSL 1zero2 is not affected by this issue.(CVE-2025-69418)

Issue summary: Calling PKCS12_get_friendlyname() function on a maliciously crafted PKCS#12 file with a BMPString (UTF-16BE) friendly name containing non-ASCII BMP code point can trigger a one byte write before the allocated buffer.

Impact summary: The out-of-bounds write can cause a memory corruption which can have various consequences including a Denial of Service.

The OPENSSL_uni2utf8() function performs a two-pass conversion of a PKCS#12 BMPString (UTF-16BE) to UTF-8. In the second pass, when emitting UTF-8 bytes, the helper function bmp_to_utf8() incorrectly forwards the remaining UTF-16 source byte count as the destination buffer capacity to UTF8_putc(). For BMP code points above U+07FF, UTF-8 requires three bytes, but the…

OpenSSL is a robust, commercial-grade, and full-featured toolkit for the Transport Layer Security (TLS) and Secure Sockets Layer (SSL) protocols.

Security Fix(es):

Issue summary: When using the low-level OCB API directly with AES-NI or other hardware-accelerated code paths, inputs whose length is not a multiple of 16 bytes can leave the final partial block unencrypted and unauthenticated.

Impact summary: The trailing 1-15 bytes of a message may be exposed in cleartext on encryption and are not covered by the authentication tag, allowing an attacker to read or tamper with those bytes without detection.

The low-level OCB encrypt and decrypt routines in the hardware-accelerated stream path process full 16-byte blocks but do not advance the input/output pointers. The subsequent tail-handling code then operates on the original base pointers, effectively reprocessing the beginning of the buffer while leaving the actual trailing bytes unprocessed. The authentication checksum also excludes the true tail bytes.

However, typical OpenSSL consumers using EVP are not affected because the higher-level EVP and provider OCB implementations split inputs so that full blocks and trailing partial blocks are processed in separate calls, avoiding the problematic code path. Additionally, TLS does not use OCB ciphersuites. The vulnerability only affects applications that call the low-level CRYPTO_ocb128_encrypt() or CRYPTO_ocb128_decrypt() functions directly with non-block-aligned lengths in a single call on hardware-accelerated builds. For these reasons the issue was assessed as Low severity.

The FIPS modules in 3six, 3five, 3four, 3three, 3two, 3one and 3zero are not affected by this issue, as OCB mode is not a FIPS-approved algorithm.

OpenSSL 3six, 3five, 3four, 3three, 3zero and 1one1 are vulnerable to this issue. OpenSSL 1zero2 is not affected by this issue.(CVE-2025-69418)

Issue summary: Calling PKCS12_get_friendlyname() function on a maliciously crafted PKCS#12 file with a BMPString (UTF-16BE) friendly name containing non-ASCII BMP code point can trigger a one byte write before the allocated buffer.

Impact summary: The out-of-bounds write can cause a memory corruption which can have various consequences including a Denial of Service.

The OPENSSL_uni2utf8() function performs a two-pass conversion of a PKCS#12 BMPString (UTF-16BE) to UTF-8. In the second pass, when emitting UTF-8 bytes, the helper function bmp_to_utf8() incorrectly forwards the remaining UTF-16 source byte count as the destination buffer capacity to UTF8_putc(). For BMP code points above U+07FF, UTF-8 requires three bytes, but the forwarded capacity can be just two bytes. UTF8_putc() then returns -1, and this negative value is added to the output length without validation, causing the length to become negative. The subsequent trailing NUL byte is then written at a negative offset, causing write outside of heap allocated buffer.

The vulnerability is reachable via the public PKCS12_get_friendlyname() API when parsing attacker-controlled PKCS#12 files. While PKCS12_parse() uses a different code path that avoids this issue, PKCS12_get_friendlyname() directly invokes the vulnerable function. Exploitation requires an attacker to provide a malicious PKCS#12 file to be parsed by the application and the attacker can just trigger a one zero byte write before the allocated buffer. For that reason the issue was assessed as Low severity according to our Security Policy.

The FIPS modules in 3.6, 3.5, 3.4, 3.3 and 3.0 are not affected by this issue, as the PKCS#12 implementation is outside the OpenSSL FIPS module boundary.

OpenSSL 3.6, 3.5, 3.۴, 3.3, 3.0 and 1.1.1 are vulnerable to this issue.

OpenSSL 1.0.2 is not affected by this issue.(CVE-2025-69419)

Issue summary: A type confusion vulnerability exists in the TimeStamp Response verification code where an ASN1_TYPE union member is accessed without first validating the type, causing an invalid or NULL pointer dereference…

OpenSSL is a robust, commercial-grade, and full-featured toolkit for the Transport Layer Security (TLS) and Secure Sockets Layer (SSL) protocols.

Security Fix(es):

Issue summary: Writing large, newline-free data into a BIO chain using the line-buffering filter where the next BIO performs short writes can trigger a heap-based out-of-bounds write.

Impact summary: This out-of-bounds write can cause memory corruption which typically results in a crash, leading to Denial of Service for an application.

The line-buffering BIO filter (BIO_f_linebuffer) is not used by default in TLS/SSL data paths. In OpenSSL command-line applications, it is typically only pushed onto stdout/stderr on VMS systems. Third-party applications that explicitly use this filter with a BIO chain that can short-write and that write large, newline-free data influenced by an attacker would be affected. However, the circumstances where this could happen are unlikely to be under attacker control, and BIO_f_linebuffer is unlikely to be handling non-curated data controlled by an attacker. For that reason the issue was assessed as Low severity.

The FIPS modules in 3.6, 3.5, 3.4, 3.3 and 3.0 are not affected by this issue, as the BIO implementation is outside the OpenSSL FIPS module boundary.

OpenSSL 3.6, 3.5, 3.4, 3.3, 3.0, 1.1.1 and 1.0.2 are vulnerable to this issue.(CVE-2025-68160)

Issue summary: When using the low-level OCB API directly with AES-NI or other hardware-accelerated code paths, inputs whose length is not a multiple of 16 bytes can leave the final partial block unencrypted and unauthenticated.

Impact summary: The trailing 1-15 bytes of a message may be exposed in cleartext on encryption and are not covered by the authentication tag, allowing an attacker to read or tamper with those bytes without detection.

The low-level OCB encrypt and decrypt routines in the hardware-accelerated stream path process full 16-byte blocks but do not advance the input/output pointers. The subsequent tail-handling code then operates on the original base pointers, effectively reprocessing the beginning of the buffer while leaving the actual trailing bytes unprocessed. The authentication checksum also excludes the true tail bytes.

However, typical OpenSSL consumers using EVP are not affected because the higher-level EVP and provider OCB implementations split inputs so that full blocks and trailing partial blocks are processed in separate calls, avoiding the problematic code path. Additionally, TLS does not use OCB ciphersuites. The vulnerability only affects applications that call the low-level CRYPTO_ocb128_encrypt() or CRYPTO_ocb128_decrypt() functions directly with non-block-aligned lengths in a single call on hardware-accelerated builds. For these reasons the issue was assessed as Low severity.

The FIPS modules in 3six, 3five, 3four, 3three, 3two, 3one and 3zero are not affected by this issue, as OCB mode is not a FIPS-approved algorithm.

OpenSSL 3six, 3five, 3four, 3three, 3zero and 1one1 are vulnerable to this issue. OpenSSL 1zero2 is not affected by this issue.(CVE-2025-69418)

Issue summary: Calling PKCS12_get_friendlyname() function on a maliciously crafted PKCS#12 file with a BMPString (UTF-16BE) friendly name containing non-ASCII BMP code point can trigger a one byte write before the allocated buffer.

Impact summary: The out-of-bounds write can cause a memory corruption which can have various consequences including a Denial of Service.

The OPENSSL_uni2utf8() function performs a two-pass conversion of a PKCS#12 BMPString (UTF-16BE) to UTF-8. In the second pass, when emitting UTF-8 bytes, the helper function bmp_to_utf8() incorrectly forwards the remaining UTF-16 source byte count as the destination buffer capacity to UTF8_putc(). For BMP code points above U+07FF, UTF-8 requires three bytes, but the forwarded capacity can be just two bytes. UTF8_putc() then returns -1, and this negative value is added to the output length without validation, causing…

OpenSSL is a robust, commercial-grade, and full-featured toolkit for the Transport Layer Security (TLS) and Secure Sockets Layer (SSL) protocols.

Security Fix(es):

Issue summary: Writing large, newline-free data into a BIO chain using the line-buffering filter where the next BIO performs short writes can trigger a heap-based out-of-bounds write.

Impact summary: This out-of-bounds write can cause memory corruption which typically results in a crash, leading to Denial of Service for an application.

The line-buffering BIO filter (BIO_f_linebuffer) is not used by default in TLS/SSL data paths. In OpenSSL command-line applications, it is typically only pushed onto stdout/stderr on VMS systems. Third-party applications that explicitly use this filter with a BIO chain that can short-write and that write large, newline-free data influenced by an attacker would be affected. However, the circumstances where this could happen are unlikely to be under attacker control, and BIO_f_linebuffer is unlikely to be handling non-curated data controlled by an attacker. For that reason the issue was assessed as Low severity.

The FIPS modules in 3.6, 3.5, 3.4, 3.3 and 3.0 are not affected by this issue, as the BIO implementation is outside the OpenSSL FIPS module boundary.

OpenSSL 3.6, 3.5, 3.4, 3.3, 3.0, 1.1.1 and 1.0.2 are vulnerable to this issue.(CVE-2025-68160)

Issue summary: When using the low-level OCB API directly with AES-NI or other hardware-accelerated code paths, inputs whose length is not a multiple of 16 bytes can leave the final partial block unencrypted and unauthenticated.

Impact summary: The trailing 1-15 bytes of a message may be exposed in cleartext on encryption and are not covered by the authentication tag, allowing an attacker to read or tamper with those bytes without detection.

The low-level OCB encrypt and decrypt routines in the hardware-accelerated stream path process full 16-byte blocks but do not advance the input/output pointers. The subsequent tail-handling code then operates on the original base pointers, effectively reprocessing the beginning of the buffer while leaving the actual trailing bytes unprocessed. The authentication checksum also excludes the true tail bytes.

However, typical OpenSSL consumers using EVP are not affected because the higher-level EVP and provider OCB implementations split inputs so that full blocks and trailing partial blocks are processed in separate calls, avoiding the problematic code path. Additionally, TLS does not use OCB ciphersuites. The vulnerability only affects applications that call the low-level CRYPTO_ocb128_encrypt() or CRYPTO_ocb128_decrypt() functions directly with non-block-aligned lengths in a single call on hardware-accelerated builds. For these reasons the issue was assessed as Low severity.

The FIPS modules in 3six, 3five, 3four, 3three, 3two, 3one and 3zero are not affected by this issue, as OCB mode is not a FIPS-approved algorithm.

OpenSSL 3six, 3five, 3four, 3three, 3zero and 1one1 are vulnerable to this issue. OpenSSL 1zero2 is not affected by this issue.(CVE-2025-69418)

Issue summary: Calling PKCS12_get_friendlyname() function on a maliciously crafted PKCS#12 file with a BMPString (UTF-16BE) friendly name containing non-ASCII BMP code point can trigger a one byte write before the allocated buffer.

Impact summary: The out-of-bounds write can cause a memory corruption which can have various consequences including a Denial of Service.

The OPENSSL_uni2utf8() function performs a two-pass conversion of a PKCS#12 BMPString (UTF-16BE) to UTF-8. In the second pass, when emitting UTF-8 bytes, the helper function bmp_to_utf8() incorrectly forwards the remaining UTF-16 source byte count as the destination buffer capacity to UTF8_putc(). For BMP code points above U+07FF, UTF-8 requires three bytes, but the forwarded capacity can be just two bytes. UTF8_putc() then returns -1, and this negative value is added to the output length without validation, causing…

OpenSSL is a robust, commercial-grade, and full-featured toolkit for the Transport Layer Security (TLS) and Secure Sockets Layer (SSL) protocols.

Security Fix(es):

Issue summary: When using the low-level OCB API directly with AES-NI or other hardware-accelerated code paths, inputs whose length is not a multiple of 16 bytes can leave the final partial block unencrypted and unauthenticated.

Impact summary: The trailing 1-15 bytes of a message may be exposed in cleartext on encryption and are not covered by the authentication tag, allowing an attacker to read or tamper with those bytes without detection.

The low-level OCB encrypt and decrypt routines in the hardware-accelerated stream path process full 16-byte blocks but do not advance the input/output pointers. The subsequent tail-handling code then operates on the original base pointers, effectively reprocessing the beginning of the buffer while leaving the actual trailing bytes unprocessed. The authentication checksum also excludes the true tail bytes.

However, typical OpenSSL consumers using EVP are not affected because the higher-level EVP and provider OCB implementations split inputs so that full blocks and trailing partial blocks are processed in separate calls, avoiding the problematic code path. Additionally, TLS does not use OCB ciphersuites. The vulnerability only affects applications that call the low-level CRYPTO_ocb128_encrypt() or CRYPTO_ocb128_decrypt() functions directly with non-block-aligned lengths in a single call on hardware-accelerated builds. For these reasons the issue was assessed as Low severity.

The FIPS modules in 3six, 3five, 3four, 3three, 3two, 3one and 3zero are not affected by this issue, as OCB mode is not a FIPS-approved algorithm.

OpenSSL 3six, 3five, 3four, 3three, 3zero and 1one1 are vulnerable to this issue. OpenSSL 1zero2 is not affected by this issue.(CVE-2025-69418)

Issue summary: Calling PKCS12_get_friendlyname() function on a maliciously crafted PKCS#12 file with a BMPString (UTF-16BE) friendly name containing non-ASCII BMP code point can trigger a one byte write before the allocated buffer.

Impact summary: The out-of-bounds write can cause a memory corruption which can have various consequences including a Denial of Service.

The OPENSSL_uni2utf8() function performs a two-pass conversion of a PKCS#12 BMPString (UTF-16BE) to UTF-8. In the second pass, when emitting UTF-8 bytes, the helper function bmp_to_utf8() incorrectly forwards the remaining UTF-16 source byte count as the destination buffer capacity to UTF8_putc(). For BMP code points above U+07FF, UTF-8 requires three bytes, but the forwarded capacity can be just two bytes. UTF8_putc() then returns -1, and this negative value is added to the output length without validation, causing the length to become negative. The subsequent trailing NUL byte is then written at a negative offset, causing write outside of heap allocated buffer.

The vulnerability is reachable via the public PKCS12_get_friendlyname() API when parsing attacker-controlled PKCS#12 files. While PKCS12_parse() uses a different code path that avoids this issue, PKCS12_get_friendlyname() directly invokes the vulnerable function. Exploitation requires an attacker to provide a malicious PKCS#12 file to be parsed by the application and the attacker can just trigger a one zero byte write before the allocated buffer. For that reason the issue was assessed as Low severity according to our Security Policy.

The FIPS modules in 3.6, 3.5, 3.4, 3.3 and 3.0 are not affected by this issue, as the PKCS#12 implementation is outside the OpenSSL FIPS module boundary.

OpenSSL 3.6, 3.5, 3.۴, 3.3, 3.0 and 1.1.1 are vulnerable to this issue.

OpenSSL 1.0.2 is not affected by this issue.(CVE-2025-69419)

Issue summary: A type confusion vulnerability exists in the TimeStamp Response verification code where an ASN1_TYPE union member is accessed without first validating the type, causing an invalid or NULL pointer dereference…

OpenSSL is a robust, commercial-grade, and full-featured toolkit for the Transport Layer Security (TLS) and Secure Sockets Layer (SSL) protocols.

Security Fix(es):

Issue summary: When using the low-level OCB API directly with AES-NI or other hardware-accelerated code paths, inputs whose length is not a multiple of 16 bytes can leave the final partial block unencrypted and unauthenticated.

Impact summary: The trailing 1-15 bytes of a message may be exposed in cleartext on encryption and are not covered by the authentication tag, allowing an attacker to read or tamper with those bytes without detection.

The low-level OCB encrypt and decrypt routines in the hardware-accelerated stream path process full 16-byte blocks but do not advance the input/output pointers. The subsequent tail-handling code then operates on the original base pointers, effectively reprocessing the beginning of the buffer while leaving the actual trailing bytes unprocessed. The authentication checksum also excludes the true tail bytes.

However, typical OpenSSL consumers using EVP are not affected because the higher-level EVP and provider OCB implementations split inputs so that full blocks and trailing partial blocks are processed in separate calls, avoiding the problematic code path. Additionally, TLS does not use OCB ciphersuites. The vulnerability only affects applications that call the low-level CRYPTO_ocb128_encrypt() or CRYPTO_ocb128_decrypt() functions directly with non-block-aligned lengths in a single call on hardware-accelerated builds. For these reasons the issue was assessed as Low severity.

The FIPS modules in 3six, 3five, 3four, 3three, 3two, 3one and 3zero are not affected by this issue, as OCB mode is not a FIPS-approved algorithm.

OpenSSL 3six, 3five, 3four, 3three, 3zero and 1one1 are vulnerable to this issue. OpenSSL 1zero2 is not affected by this issue.(CVE-2025-69418)

Issue summary: Calling PKCS12_get_friendlyname() function on a maliciously crafted PKCS#12 file with a BMPString (UTF-16BE) friendly name containing non-ASCII BMP code point can trigger a one byte write before the allocated buffer.

Impact summary: The out-of-bounds write can cause a memory corruption which can have various consequences including a Denial of Service.

The OPENSSL_uni2utf8() function performs a two-pass conversion of a PKCS#12 BMPString (UTF-16BE) to UTF-8. In the second pass, when emitting UTF-8 bytes, the helper function bmp_to_utf8() incorrectly forwards the remaining UTF-16 source byte count as the destination buffer capacity to UTF8_putc(). For BMP code points above U+07FF, UTF-8 requires three bytes, but the forwarded capacity can be just two bytes. UTF8_putc() then returns -1, and this negative value is added to the output length without validation, causing the length to become negative. The subsequent trailing NUL byte is then written at a negative offset, causing write outside of heap allocated buffer.

The vulnerability is reachable via the public PKCS12_get_friendlyname() API when parsing attacker-controlled PKCS#12 files. While PKCS12_parse() uses a different code path that avoids this issue, PKCS12_get_friendlyname() directly invokes the vulnerable function. Exploitation requires an attacker to provide a malicious PKCS#12 file to be parsed by the application and the attacker can just trigger a one zero byte write before the allocated buffer. For that reason the issue was assessed as Low severity according to our Security Policy.

The FIPS modules in 3.6, 3.5, 3.4, 3.3 and 3.0 are not affected by this issue, as the PKCS#12 implementation is outside the OpenSSL FIPS module boundary.

OpenSSL 3.6, 3.5, 3.۴, 3.3, 3.0 and 1.1.1 are vulnerable to this issue.

OpenSSL 1.0.2 is not affected by this issue.(CVE-2025-69419)

Issue summary: A type confusion vulnerability exists in the TimeStamp Response verification code where an ASN1_TYPE union member is accessed without first validating the type, causing an invalid or NULL pointer dereference…

EDK II is a modern, feature-rich, cross-platform firmware development environment for the UEFI and PI specifications.

Security Fix(es):

Issue summary: Writing large, newline-free data into a BIO chain using the line-buffering filter where the next BIO performs short writes can trigger a heap-based out-of-bounds write.

Impact summary: This out-of-bounds write can cause memory corruption which typically results in a crash, leading to Denial of Service for an application.

The line-buffering BIO filter (BIO_f_linebuffer) is not used by default in TLS/SSL data paths. In OpenSSL command-line applications, it is typically only pushed onto stdout/stderr on VMS systems. Third-party applications that explicitly use this filter with a BIO chain that can short-write and that write large, newline-free data influenced by an attacker would be affected. However, the circumstances where this could happen are unlikely to be under attacker control, and BIO_f_linebuffer is unlikely to be handling non-curated data controlled by an attacker. For that reason the issue was assessed as Low severity.

The FIPS modules in 3.6, 3.5, 3.4, 3.3 and 3.0 are not affected by this issue, as the BIO implementation is outside the OpenSSL FIPS module boundary.

OpenSSL 3.6, 3.5, 3.4, 3.3, 3.0, 1.1.1 and 1.0.2 are vulnerable to this issue.(CVE-2025-68160)

Issue summary: Calling PKCS12_get_friendlyname() function on a maliciously crafted PKCS#12 file with a BMPString (UTF-16BE) friendly name containing non-ASCII BMP code point can trigger a one byte write before the allocated buffer.

Impact summary: The out-of-bounds write can cause a memory corruption which can have various consequences including a Denial of Service.

The OPENSSL_uni2utf8() function performs a two-pass conversion of a PKCS#12 BMPString (UTF-16BE) to UTF-8. In the second pass, when emitting UTF-8 bytes, the helper function bmp_to_utf8() incorrectly forwards the remaining UTF-16 source byte count as the destination buffer capacity to UTF8_putc(). For BMP code points above U+07FF, UTF-8 requires three bytes, but the forwarded capacity can be just two bytes. UTF8_putc() then returns -1, and this negative value is added to the output length without validation, causing the length to become negative. The subsequent trailing NUL byte is then written at a negative offset, causing write outside of heap allocated buffer.

The vulnerability is reachable via the public PKCS12_get_friendlyname() API when parsing attacker-controlled PKCS#12 files. While PKCS12_parse() uses a different code path that avoids this issue, PKCS12_get_friendlyname() directly invokes the vulnerable function. Exploitation requires an attacker to provide a malicious PKCS#12 file to be parsed by the application and the attacker can just trigger a one zero byte write before the allocated buffer. For that reason the issue was assessed as Low severity according to our Security Policy.

The FIPS modules in 3.6, 3.5, 3.4, 3.3 and 3.0 are not affected by this issue, as the PKCS#12 implementation is outside the OpenSSL FIPS module boundary.

OpenSSL 3.6, 3.5, 3.4, 3.3, 3.0 and 1.1.1 are vulnerable to this issue.

OpenSSL 1.0.2 is not affected by this issue.(CVE-2025-69419)

Issue summary: A type confusion vulnerability exists in the TimeStamp Response verification code where an ASN1_TYPE union member is accessed without first validating the type, causing an invalid or NULL pointer dereference when processing a malformed TimeStamp Response file.

Impact summary: An application calling TS_RESP_verify_response() with a malformed TimeStamp Response can be caused to dereference an invalid or NULL pointer when reading, resulting in a Denial of Service.

The functions ossl_ess_get_signing_cert() and ossl_ess_get_signing_cert_v2() access the signing cert attribute value without validating its type. When the type is not V_ASN1_SEQUENCE, this results in accessing invalid memory through the ASN1_TYPE union, causing a crash.

Exploiting this…

EDK II is a modern, feature-rich, cross-platform firmware development environment for the UEFI and PI specifications.

Security Fix(es):

Issue summary: Writing large, newline-free data into a BIO chain using the line-buffering filter where the next BIO performs short writes can trigger a heap-based out-of-bounds write.

Impact summary: This out-of-bounds write can cause memory corruption which typically results in a crash, leading to Denial of Service for an application.

The line-buffering BIO filter (BIO_f_linebuffer) is not used by default in TLS/SSL data paths. In OpenSSL command-line applications, it is typically only pushed onto stdout/stderr on VMS systems. Third-party applications that explicitly use this filter with a BIO chain that can short-write and that write large, newline-free data influenced by an attacker would be affected. However, the circumstances where this could happen are unlikely to be under attacker control, and BIO_f_linebuffer is unlikely to be handling non-curated data controlled by an attacker. For that reason the issue was assessed as Low severity.

The FIPS modules in 3.6, 3.5, 3.4, 3.3 and 3.0 are not affected by this issue, as the BIO implementation is outside the OpenSSL FIPS module boundary.

OpenSSL 3.6, 3.5, 3.4, 3.3, 3.0, 1.1.1 and 1.0.2 are vulnerable to this issue.(CVE-2025-68160)

Issue summary: When using the low-level OCB API directly with AES-NI or<br>other hardware-accelerated code paths, inputs whose length is not a multiple<br>of 16 bytes can leave the final partial block unencrypted and unauthenticated.<br><br>Impact summary: The trailing 1-15 bytes of a message may be exposed in<br>cleartext on encryption and are not covered by the authentication tag,<br>allowing an attacker to read or tamper with those bytes without detection.<br><br>The low-level OCB encrypt and decrypt routines in the hardware-accelerated<br>stream path process full 16-byte blocks but do not advance the input/output<br>pointers. The subsequent tail-handling code then operates on the original<br>base pointers, effectively reprocessing the beginning of the buffer while<br>leaving the actual trailing bytes unprocessed. The authentication checksum<br>also excludes the true tail bytes.<br><br>However, typical OpenSSL consumers using EVP are not affected because the<br>higher-level EVP and provider OCB implementations split inputs so that full<br>blocks and trailing partial blocks are processed in separate calls, avoiding<br>the problematic code path. Additionally, TLS does not use OCB ciphersuites.<br>The vulnerability only affects applications that call the low-level<br>CRYPTO_ocb128_encrypt() or CRYPTO_ocb128_decrypt() functions directly with<br>non-block-aligned lengths in a single call on hardware-accelerated builds.<br>For these reasons the issue was assessed as Low severity.<br><br>The FIPS modules in 3.6, 3.5, 3.4, 3.3, 3.2, 3.1 and 3.0 are not affected<br>by this issue, as OCB mode is not a FIPS-approved algorithm.<br><br>OpenSSL 3.6, 3.5, 3.4, 3.3, 3.0 and 1.1.1 are vulnerable to this issue.<br><br>OpenSSL 1.0.2 is not affected by this issue.(CVE-2025-69418)

Issue summary: Calling PKCS12_get_friendlyname() function on a maliciously crafted PKCS#12 file with a BMPString (UTF-16BE) friendly name containing non-ASCII BMP code point can trigger a one byte write before the allocated buffer.

Impact summary: The out-of-bounds write can cause a memory corruption which can have various consequences including a Denial of Service.

The OPENSSL_uni2utf8() function performs a two-pass conversion of a PKCS#12 BMPString (UTF-16BE) to UTF-8. In the second pass, when emitting UTF-8 bytes, the helper function bmp_to_utf8() incorrectly forwards the remaining UTF-16 source byte count as the destination buffer capacity to UTF8_putc(). For BMP code…

EDK II is a modern, feature-rich, cross-platform firmware development environment for the UEFI and PI specifications.

Security Fix(es):

Issue summary: Writing large, newline-free data into a BIO chain using the line-buffering filter where the next BIO performs short writes can trigger a heap-based out-of-bounds write.

Impact summary: This out-of-bounds write can cause memory corruption which typically results in a crash, leading to Denial of Service for an application.

The line-buffering BIO filter (BIO_f_linebuffer) is not used by default in TLS/SSL data paths. In OpenSSL command-line applications, it is typically only pushed onto stdout/stderr on VMS systems. Third-party applications that explicitly use this filter with a BIO chain that can short-write and that write large, newline-free data influenced by an attacker would be affected. However, the circumstances where this could happen are unlikely to be under attacker control, and BIO_f_linebuffer is unlikely to be handling non-curated data controlled by an attacker. For that reason the issue was assessed as Low severity.

The FIPS modules in 3.6, 3.5, 3.4, 3.3 and 3.0 are not affected by this issue, as the BIO implementation is outside the OpenSSL FIPS module boundary.

OpenSSL 3.6, 3.5, 3.4, 3.3, 3.0, 1.1.1 and 1.0.2 are vulnerable to this issue.(CVE-2025-68160)

Issue summary: When using the low-level OCB API directly with AES-NI or<br>other hardware-accelerated code paths, inputs whose length is not a multiple<br>of 16 bytes can leave the final partial block unencrypted and unauthenticated.<br><br>Impact summary: The trailing 1-15 bytes of a message may be exposed in<br>cleartext on encryption and are not covered by the authentication tag,<br>allowing an attacker to read or tamper with those bytes without detection.<br><br>The low-level OCB encrypt and decrypt routines in the hardware-accelerated<br>stream path process full 16-byte blocks but do not advance the input/output<br>pointers. The subsequent tail-handling code then operates on the original<br>base pointers, effectively reprocessing the beginning of the buffer while<br>leaving the actual trailing bytes unprocessed. The authentication checksum<br>also excludes the true tail bytes.<br><br>However, typical OpenSSL consumers using EVP are not affected because the<br>higher-level EVP and provider OCB implementations split inputs so that full<br>blocks and trailing partial blocks are processed in separate calls, avoiding<br>the problematic code path. Additionally, TLS does not use OCB ciphersuites.<br>The vulnerability only affects applications that call the low-level<br>CRYPTO_ocb128_encrypt() or CRYPTO_ocb128_decrypt() functions directly with<br>non-block-aligned lengths in a single call on hardware-accelerated builds.<br>For these reasons the issue was assessed as Low severity.<br><br>The FIPS modules in 3.6, 3.5, 3.4, 3.3, 3.2, 3.1 and 3.0 are not affected<br>by this issue, as OCB mode is not a FIPS-approved algorithm.<br><br>OpenSSL 3.6, 3.5, 3.4, 3.3, 3.0 and 1.1.1 are vulnerable to this issue.<br><br>OpenSSL 1.0.2 is not affected by this issue.(CVE-2025-69418)

Issue summary: Calling PKCS12_get_friendlyname() function on a maliciously crafted PKCS#12 file with a BMPString (UTF-16BE) friendly name containing non-ASCII BMP code point can trigger a one byte write before the allocated buffer.

Impact summary: The out-of-bounds write can cause a memory corruption which can have various consequences including a Denial of Service.

The OPENSSL_uni2utf8() function performs a two-pass conversion of a PKCS#12 BMPString (UTF-16BE) to UTF-8. In the second pass, when emitting UTF-8 bytes, the helper function bmp_to_utf8() incorrectly forwards the remaining UTF-16 source byte count as the destination buffer capacity to UTF8_putc(). For BMP code…

EDK II is a modern, feature-rich, cross-platform firmware development environment for the UEFI and PI specifications.

Security Fix(es):

Issue summary: Writing large, newline-free data into a BIO chain using the line-buffering filter where the next BIO performs short writes can trigger a heap-based out-of-bounds write.

Impact summary: This out-of-bounds write can cause memory corruption which typically results in a crash, leading to Denial of Service for an application.

The line-buffering BIO filter (BIO_f_linebuffer) is not used by default in TLS/SSL data paths. In OpenSSL command-line applications, it is typically only pushed onto stdout/stderr on VMS systems. Third-party applications that explicitly use this filter with a BIO chain that can short-write and that write large, newline-free data influenced by an attacker would be affected. However, the circumstances where this could happen are unlikely to be under attacker control, and BIO_f_linebuffer is unlikely to be handling non-curated data controlled by an attacker. For that reason the issue was assessed as Low severity.

The FIPS modules in 3.6, 3.5, 3.4, 3.3 and 3.0 are not affected by this issue, as the BIO implementation is outside the OpenSSL FIPS module boundary.

OpenSSL 3.6, 3.5, 3.4, 3.3, 3.0, 1.1.1 and 1.0.2 are vulnerable to this issue.(CVE-2025-68160)

Issue summary: When using the low-level OCB API directly with AES-NI or<br>other hardware-accelerated code paths, inputs whose length is not a multiple<br>of 16 bytes can leave the final partial block unencrypted and unauthenticated.<br><br>Impact summary: The trailing 1-15 bytes of a message may be exposed in<br>cleartext on encryption and are not covered by the authentication tag,<br>allowing an attacker to read or tamper with those bytes without detection.<br><br>The low-level OCB encrypt and decrypt routines in the hardware-accelerated<br>stream path process full 16-byte blocks but do not advance the input/output<br>pointers. The subsequent tail-handling code then operates on the original<br>base pointers, effectively reprocessing the beginning of the buffer while<br>leaving the actual trailing bytes unprocessed. The authentication checksum<br>also excludes the true tail bytes.<br><br>However, typical OpenSSL consumers using EVP are not affected because the<br>higher-level EVP and provider OCB implementations split inputs so that full<br>blocks and trailing partial blocks are processed in separate calls, avoiding<br>the problematic code path. Additionally, TLS does not use OCB ciphersuites.<br>The vulnerability only affects applications that call the low-level<br>CRYPTO_ocb128_encrypt() or CRYPTO_ocb128_decrypt() functions directly with<br>non-block-aligned lengths in a single call on hardware-accelerated builds.<br>For these reasons the issue was assessed as Low severity.<br><br>The FIPS modules in 3.6, 3.5, 3.4, 3.3, 3.2, 3.1 and 3.0 are not affected<br>by this issue, as OCB mode is not a FIPS-approved algorithm.<br><br>OpenSSL 3.6, 3.5, 3.4, 3.3, 3.0 and 1.1.1 are vulnerable to this issue.<br><br>OpenSSL 1.0.2 is not affected by this issue.(CVE-2025-69418)

Issue summary: A type confusion vulnerability exists in the TimeStamp Response verification code where an ASN1_TYPE union member is accessed without first validating the type, causing an invalid or NULL pointer dereference when processing a malformed TimeStamp Response file.

Impact summary: An application calling TS_RESP_verify_response() with a malformed TimeStamp Response can be caused to dereference an invalid or NULL pointer when reading, resulting in a Denial of Service.

The functions ossl_ess_get_signing_cert() and ossl_ess_get_signing_cert_v2() access the signing cert attribute value without validating its type. When the type is not V_ASN1_SEQUENCE, this results in…

EDK II is a modern, feature-rich, cross-platform firmware development environment for the UEFI and PI specifications.

Security Fix(es):

Issue summary: Writing large, newline-free data into a BIO chain using the line-buffering filter where the next BIO performs short writes can trigger a heap-based out-of-bounds write.

Impact summary: This out-of-bounds write can cause memory corruption which typically results in a crash, leading to Denial of Service for an application.

The line-buffering BIO filter (BIO_f_linebuffer) is not used by default in TLS/SSL data paths. In OpenSSL command-line applications, it is typically only pushed onto stdout/stderr on VMS systems. Third-party applications that explicitly use this filter with a BIO chain that can short-write and that write large, newline-free data influenced by an attacker would be affected. However, the circumstances where this could happen are unlikely to be under attacker control, and BIO_f_linebuffer is unlikely to be handling non-curated data controlled by an attacker. For that reason the issue was assessed as Low severity.

The FIPS modules in 3.6, 3.5, 3.4, 3.3 and 3.0 are not affected by this issue, as the BIO implementation is outside the OpenSSL FIPS module boundary.

OpenSSL 3.6, 3.5, 3.4, 3.3, 3.0, 1.1.1 and 1.0.2 are vulnerable to this issue.(CVE-2025-68160)

Issue summary: When using the low-level OCB API directly with AES-NI or<br>other hardware-accelerated code paths, inputs whose length is not a multiple<br>of 16 bytes can leave the final partial block unencrypted and unauthenticated.<br><br>Impact summary: The trailing 1-15 bytes of a message may be exposed in<br>cleartext on encryption and are not covered by the authentication tag,<br>allowing an attacker to read or tamper with those bytes without detection.<br><br>The low-level OCB encrypt and decrypt routines in the hardware-accelerated<br>stream path process full 16-byte blocks but do not advance the input/output<br>pointers. The subsequent tail-handling code then operates on the original<br>base pointers, effectively reprocessing the beginning of the buffer while<br>leaving the actual trailing bytes unprocessed. The authentication checksum<br>also excludes the true tail bytes.<br><br>However, typical OpenSSL consumers using EVP are not affected because the<br>higher-level EVP and provider OCB implementations split inputs so that full<br>blocks and trailing partial blocks are processed in separate calls, avoiding<br>the problematic code path. Additionally, TLS does not use OCB ciphersuites.<br>The vulnerability only affects applications that call the low-level<br>CRYPTO_ocb128_encrypt() or CRYPTO_ocb128_decrypt() functions directly with<br>non-block-aligned lengths in a single call on hardware-accelerated builds.<br>For these reasons the issue was assessed as Low severity.<br><br>The FIPS modules in 3.6, 3.5, 3.4, 3.3, 3.2, 3.1 and 3.0 are not affected<br>by this issue, as OCB mode is not a FIPS-approved algorithm.<br><br>OpenSSL 3.6, 3.5, 3.4, 3.3, 3.0 and 1.1.1 are vulnerable to this issue.<br><br>OpenSSL 1.0.2 is not affected by this issue.(CVE-2025-69418)

Issue summary: A type confusion vulnerability exists in the TimeStamp Response verification code where an ASN1_TYPE union member is accessed without first validating the type, causing an invalid or NULL pointer dereference when processing a malformed TimeStamp Response file.

Impact summary: An application calling TS_RESP_verify_response() with a malformed TimeStamp Response can be caused to dereference an invalid or NULL pointer when reading, resulting in a Denial of Service.

The functions ossl_ess_get_signing_cert() and ossl_ess_get_signing_cert_v2() access the signing cert attribute value without validating its type. When the type is not V_ASN1_SEQUENCE, this results in…

EDK II is a modern, feature-rich, cross-platform firmware development environment for the UEFI and PI specifications.

Security Fix(es):

Issue summary: Writing large, newline-free data into a BIO chain using the line-buffering filter where the next BIO performs short writes can trigger a heap-based out-of-bounds write.

Impact summary: This out-of-bounds write can cause memory corruption which typically results in a crash, leading to Denial of Service for an application.

The line-buffering BIO filter (BIO_f_linebuffer) is not used by default in TLS/SSL data paths. In OpenSSL command-line applications, it is typically only pushed onto stdout/stderr on VMS systems. Third-party applications that explicitly use this filter with a BIO chain that can short-write and that write large, newline-free data influenced by an attacker would be affected. However, the circumstances where this could happen are unlikely to be under attacker control, and BIO_f_linebuffer is unlikely to be handling non-curated data controlled by an attacker. For that reason the issue was assessed as Low severity.

The FIPS modules in 3.6, 3.5, 3.4, 3.3 and 3.0 are not affected by this issue, as the BIO implementation is outside the OpenSSL FIPS module boundary.

OpenSSL 3.6, 3.5, 3.4, 3.3, 3.0, 1.1.1 and 1.0.2 are vulnerable to this issue.(CVE-2025-68160)

Issue summary: When using the low-level OCB API directly with AES-NI or<br>other hardware-accelerated code paths, inputs whose length is not a multiple<br>of 16 bytes can leave the final partial block unencrypted and unauthenticated.<br><br>Impact summary: The trailing 1-15 bytes of a message may be exposed in<br>cleartext on encryption and are not covered by the authentication tag,<br>allowing an attacker to read or tamper with those bytes without detection.<br><br>The low-level OCB encrypt and decrypt routines in the hardware-accelerated<br>stream path process full 16-byte blocks but do not advance the input/output<br>pointers. The subsequent tail-handling code then operates on the original<br>base pointers, effectively reprocessing the beginning of the buffer while<br>leaving the actual trailing bytes unprocessed. The authentication checksum<br>also excludes the true tail bytes.<br><br>However, typical OpenSSL consumers using EVP are not affected because the<br>higher-level EVP and provider OCB implementations split inputs so that full<br>blocks and trailing partial blocks are processed in separate calls, avoiding<br>the problematic code path. Additionally, TLS does not use OCB ciphersuites.<br>The vulnerability only affects applications that call the low-level<br>CRYPTO_ocb128_encrypt() or CRYPTO_ocb128_decrypt() functions directly with<br>non-block-aligned lengths in a single call on hardware-accelerated builds.<br>For these reasons the issue was assessed as Low severity.<br><br>The FIPS modules in 3.6, 3.5, 3.4, 3.3, 3.2, 3.1 and 3.0 are not affected<br>by this issue, as OCB mode is not a FIPS-approved algorithm.<br><br>OpenSSL 3.6, 3.5, 3.4, 3.3, 3.0 and 1.1.1 are vulnerable to this issue.<br><br>OpenSSL 1.0.2 is not affected by this issue.(CVE-2025-69418)

Issue summary: A type confusion vulnerability exists in the TimeStamp Response verification code where an ASN1_TYPE union member is accessed without first validating the type, causing an invalid or NULL pointer dereference when processing a malformed TimeStamp Response file.

Impact summary: An application calling TS_RESP_verify_response() with a malformed TimeStamp Response can be caused to dereference an invalid or NULL pointer when reading, resulting in a Denial of Service.

The functions ossl_ess_get_signing_cert() and ossl_ess_get_signing_cert_v2() access the signing cert attribute value without validating its type. When the type is not V_ASN1_SEQUENCE, this results in…

OpenSSL is a robust, commercial-grade, and full-featured toolkit for the Transport Layer Security (TLS) and Secure Sockets Layer (SSL) protocols.

Security Fix(es):

Issue summary: Writing large, newline-free data into a BIO chain using the line-buffering filter where the next BIO performs short writes can trigger a heap-based out-of-bounds write.

Impact summary: This out-of-bounds write can cause memory corruption which typically results in a crash, leading to Denial of Service for an application.

The line-buffering BIO filter (BIO_f_linebuffer) is not used by default in TLS/SSL data paths. In OpenSSL command-line applications, it is typically only pushed onto stdout/stderr on VMS systems. Third-party applications that explicitly use this filter with a BIO chain that can short-write and that write large, newline-free data influenced by an attacker would be affected. However, the circumstances where this could happen are unlikely to be under attacker control, and BIO_f_linebuffer is unlikely to be handling non-curated data controlled by an attacker. For that reason the issue was assessed as Low severity.

The FIPS modules in 3.6, 3.5, 3.4, 3.3 and 3.0 are not affected by this issue, as the BIO implementation is outside the OpenSSL FIPS module boundary.

OpenSSL 3.6, 3.5, 3.4, 3.3, 3.0, 1.1.1 and 1.0.2 are vulnerable to this issue.(CVE-2025-68160)

Issue summary: When using the low-level OCB API directly with AES-NI or<br>other hardware-accelerated code paths, inputs whose length is not a multiple<br>of 16 bytes can leave the final partial block unencrypted and unauthenticated.<br><br>Impact summary: The trailing 1-15 bytes of a message may be exposed in<br>cleartext on encryption and are not covered by the authentication tag,<br>allowing an attacker to read or tamper with those bytes without detection.<br><br>The low-level OCB encrypt and decrypt routines in the hardware-accelerated<br>stream path process full 16-byte blocks but do not advance the input/output<br>pointers. The subsequent tail-handling code then operates on the original<br>base pointers, effectively reprocessing the beginning of the buffer while<br>leaving the actual trailing bytes unprocessed. The authentication checksum<br>also excludes the true tail bytes.<br><br>However, typical OpenSSL consumers using EVP are not affected because the<br>higher-level EVP and provider OCB implementations split inputs so that full<br>blocks and trailing partial blocks are processed in separate calls, avoiding<br>the problematic code path. Additionally, TLS does not use OCB ciphersuites.<br>The vulnerability only affects applications that call the low-level<br>CRYPTO_ocb128_encrypt() or CRYPTO_ocb128_decrypt() functions directly with<br>non-block-aligned lengths in a single call on hardware-accelerated builds.<br>For these reasons the issue was assessed as Low severity.<br><br>The FIPS modules in 3.6, 3.5, 3.4, 3.3, 3.2, 3.1 and 3.0 are not affected<br>by this issue, as OCB mode is not a FIPS-approved algorithm.<br><br>OpenSSL 3.6, 3.5, 3.4, 3.3, 3.0 and 1.1.1 are vulnerable to this issue.<br><br>OpenSSL 1.0.2 is not affected by this issue.(CVE-2025-69418)

Issue summary: Calling PKCS12_get_friendlyname() function on a maliciously crafted PKCS#12 file with a BMPString (UTF-16BE) friendly name containing non-ASCII BMP code point can trigger a one byte write before the allocated buffer.

Impact summary: The out-of-bounds write can cause a memory corruption which can have various consequences including a Denial of Service.

The OPENSSL_uni2utf8() function performs a two-pass conversion of a PKCS#12 BMPString (UTF-16BE) to UTF-8. In the second pass, when emitting UTF-8 bytes, the helper function bmp_to_utf8() incorrectly forwards the remaining UTF-16 source byte count as the destination buffer capacity to…

OpenSSL is a robust, commercial-grade, and full-featured toolkit for the Transport Layer Security (TLS) and Secure Sockets Layer (SSL) protocols.

Security Fix(es):

Issue summary: Writing large, newline-free data into a BIO chain using the line-buffering filter where the next BIO performs short writes can trigger a heap-based out-of-bounds write.

Impact summary: This out-of-bounds write can cause memory corruption which typically results in a crash, leading to Denial of Service for an application.

The line-buffering BIO filter (BIO_f_linebuffer) is not used by default in TLS/SSL data paths. In OpenSSL command-line applications, it is typically only pushed onto stdout/stderr on VMS systems. Third-party applications that explicitly use this filter with a BIO chain that can short-write and that write large, newline-free data influenced by an attacker would be affected. However, the circumstances where this could happen are unlikely to be under attacker control, and BIO_f_linebuffer is unlikely to be handling non-curated data controlled by an attacker. For that reason the issue was assessed as Low severity.

The FIPS modules in 3.6, 3.5, 3.4, 3.3 and 3.0 are not affected by this issue, as the BIO implementation is outside the OpenSSL FIPS module boundary.

OpenSSL 3.6, 3.5, 3.4, 3.3, 3.0, 1.1.1 and 1.0.2 are vulnerable to this issue.(CVE-2025-68160)

Issue summary: When using the low-level OCB API directly with AES-NI or<br>other hardware-accelerated code paths, inputs whose length is not a multiple<br>of 16 bytes can leave the final partial block unencrypted and unauthenticated.<br><br>Impact summary: The trailing 1-15 bytes of a message may be exposed in<br>cleartext on encryption and are not covered by the authentication tag,<br>allowing an attacker to read or tamper with those bytes without detection.<br><br>The low-level OCB encrypt and decrypt routines in the hardware-accelerated<br>stream path process full 16-byte blocks but do not advance the input/output<br>pointers. The subsequent tail-handling code then operates on the original<br>base pointers, effectively reprocessing the beginning of the buffer while<br>leaving the actual trailing bytes unprocessed. The authentication checksum<br>also excludes the true tail bytes.<br><br>However, typical OpenSSL consumers using EVP are not affected because the<br>higher-level EVP and provider OCB implementations split inputs so that full<br>blocks and trailing partial blocks are processed in separate calls, avoiding<br>the problematic code path. Additionally, TLS does not use OCB ciphersuites.<br>The vulnerability only affects applications that call the low-level<br>CRYPTO_ocb128_encrypt() or CRYPTO_ocb128_decrypt() functions directly with<br>non-block-aligned lengths in a single call on hardware-accelerated builds.<br>For these reasons the issue was assessed as Low severity.<br><br>The FIPS modules in 3.6, 3.5, 3.4, 3.3, 3.2, 3.1 and 3.0 are not affected<br>by this issue, as OCB mode is not a FIPS-approved algorithm.<br><br>OpenSSL 3.6, 3.5, 3.4, 3.3, 3.0 and 1.1.1 are vulnerable to this issue.<br><br>OpenSSL 1.0.2 is not affected by this issue.(CVE-2025-69418)

Issue summary: Calling PKCS12_get_friendlyname() function on a maliciously crafted PKCS#12 file with a BMPString (UTF-16BE) friendly name containing non-ASCII BMP code point can trigger a one byte write before the allocated buffer.

Impact summary: The out-of-bounds write can cause a memory corruption which can have various consequences including a Denial of Service.

The OPENSSL_uni2utf8() function performs a two-pass conversion of a PKCS#12 BMPString (UTF-16BE) to UTF-8. In the second pass, when emitting UTF-8 bytes, the helper function bmp_to_utf8() incorrectly forwards the remaining UTF-16 source byte count as the destination buffer capacity to…

OpenSSL is a robust, commercial-grade, and full-featured toolkit for the Transport Layer Security (TLS) and Secure Sockets Layer (SSL) protocols.

Security Fix(es):

Issue summary: Writing large, newline-free data into a BIO chain using the line-buffering filter where the next BIO performs short writes can trigger a heap-based out-of-bounds write.

Impact summary: This out-of-bounds write can cause memory corruption which typically results in a crash, leading to Denial of Service for an application.

The line-buffering BIO filter (BIO_f_linebuffer) is not used by default in TLS/SSL data paths. In OpenSSL command-line applications, it is typically only pushed onto stdout/stderr on VMS systems. Third-party applications that explicitly use this filter with a BIO chain that can short-write and that write large, newline-free data influenced by an attacker would be affected. However, the circumstances where this could happen are unlikely to be under attacker control, and BIO_f_linebuffer is unlikely to be handling non-curated data controlled by an attacker. For that reason the issue was assessed as Low severity.

The FIPS modules in 3.6, 3.5, 3.4, 3.3 and 3.0 are not affected by this issue, as the BIO implementation is outside the OpenSSL FIPS module boundary.

OpenSSL 3.6, 3.5, 3.4, 3.3, 3.0, 1.1.1 and 1.0.2 are vulnerable to this issue.(CVE-2025-68160)

Issue summary: When using the low-level OCB API directly with AES-NI or<br>other hardware-accelerated code paths, inputs whose length is not a multiple<br>of 16 bytes can leave the final partial block unencrypted and unauthenticated.<br><br>Impact summary: The trailing 1-15 bytes of a message may be exposed in<br>cleartext on encryption and are not covered by the authentication tag,<br>allowing an attacker to read or tamper with those bytes without detection.<br><br>The low-level OCB encrypt and decrypt routines in the hardware-accelerated<br>stream path process full 16-byte blocks but do not advance the input/output<br>pointers. The subsequent tail-handling code then operates on the original<br>base pointers, effectively reprocessing the beginning of the buffer while<br>leaving the actual trailing bytes unprocessed. The authentication checksum<br>also excludes the true tail bytes.<br><br>However, typical OpenSSL consumers using EVP are not affected because the<br>higher-level EVP and provider OCB implementations split inputs so that full<br>blocks and trailing partial blocks are processed in separate calls, avoiding<br>the problematic code path. Additionally, TLS does not use OCB ciphersuites.<br>The vulnerability only affects applications that call the low-level<br>CRYPTO_ocb128_encrypt() or CRYPTO_ocb128_decrypt() functions directly with<br>non-block-aligned lengths in a single call on hardware-accelerated builds.<br>For these reasons the issue was assessed as Low severity.<br><br>The FIPS modules in 3.6, 3.5, 3.4, 3.3, 3.2, 3.1 and 3.0 are not affected<br>by this issue, as OCB mode is not a FIPS-approved algorithm.<br><br>OpenSSL 3.6, 3.5, 3.4, 3.3, 3.0 and 1.1.1 are vulnerable to this issue.<br><br>OpenSSL 1.0.2 is not affected by this issue.(CVE-2025-69418)

Issue summary: Calling PKCS12_get_friendlyname() function on a maliciously crafted PKCS#12 file with a BMPString (UTF-16BE) friendly name containing non-ASCII BMP code point can trigger a one byte write before the allocated buffer.

Impact summary: The out-of-bounds write can cause a memory corruption which can have various consequences including a Denial of Service.

The OPENSSL_uni2utf8() function performs a two-pass conversion of a PKCS#12 BMPString (UTF-16BE) to UTF-8. In the second pass, when emitting UTF-8 bytes, the helper function bmp_to_utf8() incorrectly forwards the remaining UTF-16 source byte count as the destination buffer capacity to…

OpenSSL is a toolkit that implements the Secure Sockets Layer (SSL) and Transport Layer Security (TLS) protocols, as well as a full-strength general-purpose cryptography library.

Security Fix(es):

• openssl: OpenSSL: Arbitrary code execution or denial of service through crafted PKCS#12 file (CVE-2025-11187)

• openssl: OpenSSL: Remote code execution or Denial of Service via oversized Initialization Vector in CMS parsing (CVE-2025-15467)

• openssl: OpenSSL: Denial of Service via NULL pointer dereference in QUIC protocol handling (CVE-2025-15468)

• openssl: OpenSSL: Data integrity bypass in openssl dgst command due to silent truncation (CVE-2025-15469)

• openssl: OpenSSL: Denial of Service due to excessive memory allocation in TLS 1.3 certificate compression (CVE-2025-66199)

• openssl: OpenSSL: Denial of Service due to out-of-bounds write in BIO filter (CVE-2025-68160)

• openssl: OpenSSL: Information disclosure and data tampering via specific low-level OCB encryption/decryption calls (CVE-2025-69418)

• openssl: OpenSSL: Arbitrary code execution due to out-of-bounds write in PKCS#12 processing (CVE-2025-69419)

• openssl: OpenSSL: Denial of Service via malformed PKCS#12 file processing (CVE-2025-69421)

• openssl: OpenSSL: Denial of Service via malformed TimeStamp Response (CVE-2025-69420)

• openssl: OpenSSL: Denial of Service due to type confusion in PKCS#12 file processing (CVE-2026-22795)

• openssl: OpenSSL: Denial of Service via type confusion in PKCS#7 signature verification (CVE-2026-22796)

For more details about the security issue(s), including the impact, a CVSS score, acknowledgments, and other related information, refer to the CVE page(s) listed in the References section.

OpenSSL is a toolkit that implements the Secure Sockets Layer (SSL) and Transport Layer Security (TLS) protocols, as well as a full-strength general-purpose cryptography library.

Security Fix(es):

• openssl: OpenSSL: Arbitrary code execution or denial of service through crafted PKCS#12 file (CVE-2025-11187)

• openssl: OpenSSL: Remote code execution or Denial of Service via oversized Initialization Vector in CMS parsing (CVE-2025-15467)

• openssl: OpenSSL: Denial of Service via NULL pointer dereference in QUIC protocol handling (CVE-2025-15468)

• openssl: OpenSSL: Data integrity bypass in openssl dgst command due to silent truncation (CVE-2025-15469)

• openssl: OpenSSL: Denial of Service due to excessive memory allocation in TLS 1.3 certificate compression (CVE-2025-66199)

• openssl: OpenSSL: Denial of Service due to out-of-bounds write in BIO filter (CVE-2025-68160)

• openssl: OpenSSL: Information disclosure and data tampering via specific low-level OCB encryption/decryption calls (CVE-2025-69418)

• openssl: OpenSSL: Arbitrary code execution due to out-of-bounds write in PKCS#12 processing (CVE-2025-69419)

• openssl: OpenSSL: Denial of Service via malformed PKCS#12 file processing (CVE-2025-69421)

• openssl: OpenSSL: Denial of Service via malformed TimeStamp Response (CVE-2025-69420)

• openssl: OpenSSL: Denial of Service due to type confusion in PKCS#12 file processing (CVE-2026-22795)

• openssl: OpenSSL: Denial of Service via type confusion in PKCS#7 signature verification (CVE-2026-22796)

For more details about the security issue(s), including the impact, a CVSS score, acknowledgments, and other related information, refer to the CVE page(s) listed in the References section.

Root has patched CVE-2026-22796 in the openssl package for Root:Alpine:3.23. Multiple fixed versions available.

Issue summary: A type confusion vulnerability exists in the signature verification of signed PKCS#7 data where an ASN1_TYPE union member is accessed without first validating the type, causing an invalid or NULL pointer dereference when processing malformed PKCS#7 data. Impact summary: An application performing signature verification of PKCS#7 data or calling directly the PKCS7_digest_from_attributes() function can be caused to dereference an invalid or NULL pointer when reading, resulting in a Denial of Service. The function PKCS7_digest_from_attributes() accesses the message digest attribute value without validating its type. When the type is not V_ASN1_OCTET_STRING, this results in accessing invalid memory through the ASN1_TYPE union, causing a crash. Exploiting this vulnerability requires an attacker to provide a malformed signed PKCS#7 to an application that verifies it. The impact of the exploit is just a Denial of Service, the PKCS7 API is legacy and applications should be using the CMS API instead. For these reasons the issue was assessed as Low severity. The FIPS modules in 3.5, 3.4, 3.3 and 3.0 are not affected by this issue, as the PKCS#7 parsing implementation is outside the OpenSSL FIPS module boundary. OpenSSL 3.6, 3.5, 3.4, 3.3, 3.0, 1.1.1 and 1.0.2 are vulnerable to this issue. Impact summary: An application performing signature verification of PKCS#7 data or calling directly the PKCS7_digest_from_attributes() function can be caused to dereference an invalid or NULL pointer when reading, resulting in a Denial of Service. The function PKCS7_digest_from_attributes() accesses the message digest attribute value without validating its type. When the type is not V_ASN1_OCTET_STRING, this results in accessing invalid memory through the ASN1_TYPE union, causing a crash. Exploiting this vulnerability requires an attacker to provide a malformed signed PKCS#7 to an application that verifies it. The impact of the exploit is just a Denial of Service, the PKCS7 API is legacy and applications should be using the CMS API instead. For these reasons the issue was assessed as Low severity. The FIPS modules in 3.5, 3.4, 3.3 and 3.0 are not affected by this issue, as the PKCS#7 parsing implementation is outside the OpenSSL FIPS module boundary. OpenSSL 3.6, 3.5, 3.4, 3.3, 3.0, 1.1.1 and 1.0.2 are vulnerable to this issue.

OpenSSL is a toolkit that implements the Secure Sockets Layer (SSL) and Transport Layer Security (TLS) protocols, as well as a full-strength general-purpose cryptography library.

Security Fix(es):

• openssl: OpenSSL: Arbitrary code execution or denial of service through crafted PKCS#12 file (CVE-2025-11187)
• openssl: OpenSSL: Remote code execution or Denial of Service via oversized Initialization Vector in CMS parsing (CVE-2025-15467)
• openssl: OpenSSL: Denial of Service via NULL pointer dereference in QUIC protocol handling (CVE-2025-15468)
• openssl: OpenSSL: Data integrity bypass in openssl dgst command due to silent truncation (CVE-2025-15469)
• openssl: OpenSSL: Denial of Service due to excessive memory allocation in TLS 1.3 certificate compression (CVE-2025-66199)
• openssl: OpenSSL: Denial of Service due to out-of-bounds write in BIO filter (CVE-2025-68160)
• openssl: OpenSSL: Information disclosure and data tampering via specific low-level OCB encryption/decryption calls (CVE-2025-69418)
• openssl: OpenSSL: Arbitrary code execution due to out-of-bounds write in PKCS#12 processing (CVE-2025-69419)
• openssl: OpenSSL: Denial of Service via malformed PKCS#12 file processing (CVE-2025-69421)
• openssl: OpenSSL: Denial of Service via malformed TimeStamp Response (CVE-2025-69420)
• openssl: OpenSSL: Denial of Service due to type confusion in PKCS#12 file processing (CVE-2026-22795)
• openssl: OpenSSL: Denial of Service via type confusion in PKCS#7 signature verification (CVE-2026-22796)

For more details about the security issue(s), including the impact, a CVSS score, acknowledgments, and other related information, refer to the CVE page(s) listed in the References section.

OpenSSL is a toolkit that implements the Secure Sockets Layer (SSL) and Transport Layer Security (TLS) protocols, as well as a full-strength general-purpose cryptography library.

Security Fix(es):

• openssl: OpenSSL: Arbitrary code execution or denial of service through crafted PKCS#12 file (CVE-2025-11187)
• openssl: OpenSSL: Remote code execution or Denial of Service via oversized Initialization Vector in CMS parsing (CVE-2025-15467)
• openssl: OpenSSL: Denial of Service via NULL pointer dereference in QUIC protocol handling (CVE-2025-15468)
• openssl: OpenSSL: Data integrity bypass in openssl dgst command due to silent truncation (CVE-2025-15469)
• openssl: OpenSSL: Denial of Service due to excessive memory allocation in TLS 1.3 certificate compression (CVE-2025-66199)
• openssl: OpenSSL: Denial of Service due to out-of-bounds write in BIO filter (CVE-2025-68160)
• openssl: OpenSSL: Information disclosure and data tampering via specific low-level OCB encryption/decryption calls (CVE-2025-69418)
• openssl: OpenSSL: Arbitrary code execution due to out-of-bounds write in PKCS#12 processing (CVE-2025-69419)
• openssl: OpenSSL: Denial of Service via malformed PKCS#12 file processing (CVE-2025-69421)
• openssl: OpenSSL: Denial of Service via malformed TimeStamp Response (CVE-2025-69420)
• openssl: OpenSSL: Denial of Service due to type confusion in PKCS#12 file processing (CVE-2026-22795)
• openssl: OpenSSL: Denial of Service via type confusion in PKCS#7 signature verification (CVE-2026-22796)

For more details about the security issue(s), including the impact, a CVSS score, acknowledgments, and other related information, refer to the CVE page(s) listed in the References section.

Issue summary: A type confusion vulnerability exists in the signature verification of signed PKCS#7 data where an ASN1_TYPE union member is accessed without first validating the type, causing an invalid or NULL pointer dereference when processing malformed PKCS#7 data.

Impact summary: An application performing signature verification of PKCS#7 data or calling directly the PKCS7_digest_from_attributes() function can be caused to dereference an invalid or NULL pointer when reading, resulting in a Denial of Service.

The function PKCS7_digest_from_attributes() accesses the message digest attribute value without validating its type. When the type is not V_ASN1_OCTET_STRING, this results in accessing invalid memory through the ASN1_TYPE union, causing a crash.

Exploiting this vulnerability requires an attacker to provide a malformed signed PKCS#7 to an application that verifies it. The impact of the exploit is just a Denial of Service, the PKCS7 API is legacy and applications should be using the CMS API instead. For these reasons the issue was assessed as Low severity.

The FIPS modules in 3.5, 3.4, 3.3 and 3.0 are not affected by this issue, as the PKCS#7 parsing implementation is outside the OpenSSL FIPS module boundary.

OpenSSL 3.6, 3.5, 3.4, 3.3, 3.0, 1.1.1 and 1.0.2 are vulnerable to this issue.

Issue summary: A type confusion vulnerability exists in the signature verification of signed PKCS#7 data where an ASN1_TYPE union member is accessed without first validating the type, causing an invalid or NULL pointer dereference when processing malformed PKCS#7 data.

Impact summary: An application performing signature verification of PKCS#7 data or calling directly the PKCS7_digest_from_attributes() function can be caused to dereference an invalid or NULL pointer when reading, resulting in a Denial of Service.

The function PKCS7_digest_from_attributes() accesses the message digest attribute value without validating its type. When the type is not V_ASN1_OCTET_STRING, this results in accessing invalid memory through the ASN1_TYPE union, causing a crash.

Exploiting this vulnerability requires an attacker to provide a malformed signed PKCS#7 to an application that verifies it. The impact of the exploit is just a Denial of Service, the PKCS7 API is legacy and applications should be using the CMS API instead. For these reasons the issue was assessed as Low severity.

The FIPS modules in 3.5, 3.4, 3.3 and 3.0 are not affected by this issue, as the PKCS#7 parsing implementation is outside the OpenSSL FIPS module boundary.

OpenSSL 3.6, 3.5, 3.4, 3.3, 3.0, 1.1.1 and 1.0.2 are vulnerable to this issue.

Issue summary: A type confusion vulnerability exists in the signature verification of signed PKCS#7 data where an ASN1_TYPE union member is accessed without first validating the type, causing an invalid or NULL pointer dereference when processing malformed PKCS#7 data.

Impact summary: An application performing signature verification of PKCS#7 data or calling directly the PKCS7_digest_from_attributes() function can be caused to dereference an invalid or NULL pointer when reading, resulting in a Denial of Service.

The function PKCS7_digest_from_attributes() accesses the message digest attribute value without validating its type. When the type is not V_ASN1_OCTET_STRING, this results in accessing invalid memory through the ASN1_TYPE union, causing a crash.

Exploiting this vulnerability requires an attacker to provide a malformed signed PKCS#7 to an application that verifies it. The impact of the exploit is just a Denial of Service, the PKCS7 API is legacy and applications should be using the CMS API instead. For these reasons the issue was assessed as Low severity.

The FIPS modules in 3.5, 3.4, 3.3 and 3.0 are not affected by this issue, as the PKCS#7 parsing implementation is outside the OpenSSL FIPS module boundary.

OpenSSL 3.6, 3.5, 3.4, 3.3, 3.0, 1.1.1 and 1.0.2 are vulnerable to this issue.

Issue summary: A type confusion vulnerability exists in the signature verification of signed PKCS#7 data where an ASN1_TYPE union member is accessed without first validating the type, causing an invalid or NULL pointer dereference when processing malformed PKCS#7 data.

Impact summary: An application performing signature verification of PKCS#7 data or calling directly the PKCS7_digest_from_attributes() function can be caused to dereference an invalid or NULL pointer when reading, resulting in a Denial of Service.

The function PKCS7_digest_from_attributes() accesses the message digest attribute value without validating its type. When the type is not V_ASN1_OCTET_STRING, this results in accessing invalid memory through the ASN1_TYPE union, causing a crash.

Exploiting this vulnerability requires an attacker to provide a malformed signed PKCS#7 to an application that verifies it. The impact of the exploit is just a Denial of Service, the PKCS7 API is legacy and applications should be using the CMS API instead. For these reasons the issue was assessed as Low severity.

The FIPS modules in 3.5, 3.4, 3.3 and 3.0 are not affected by this issue, as the PKCS#7 parsing implementation is outside the OpenSSL FIPS module boundary.

OpenSSL 3.6, 3.5, 3.4, 3.3, 3.0, 1.1.1 and 1.0.2 are vulnerable to this issue.

Issue summary: A type confusion vulnerability exists in the signature verification of signed PKCS#7 data where an ASN1_TYPE union member is accessed without first validating the type, causing an invalid or NULL pointer dereference when processing malformed PKCS#7 data.

Impact summary: An application performing signature verification of PKCS#7 data or calling directly the PKCS7_digest_from_attributes() function can be caused to dereference an invalid or NULL pointer when reading, resulting in a Denial of Service.

The function PKCS7_digest_from_attributes() accesses the message digest attribute value without validating its type. When the type is not V_ASN1_OCTET_STRING, this results in accessing invalid memory through the ASN1_TYPE union, causing a crash.

Exploiting this vulnerability requires an attacker to provide a malformed signed PKCS#7 to an application that verifies it. The impact of the exploit is just a Denial of Service, the PKCS7 API is legacy and applications should be using the CMS API instead. For these reasons the issue was assessed as Low severity.

The FIPS modules in 3.5, 3.4, 3.3 and 3.0 are not affected by this issue, as the PKCS#7 parsing implementation is outside the OpenSSL FIPS module boundary.

OpenSSL 3.6, 3.5, 3.4, 3.3, 3.0, 1.1.1 and 1.0.2 are vulnerable to this issue.

Issue summary: A type confusion vulnerability exists in the signature verification of signed PKCS#7 data where an ASN1_TYPE union member is accessed without first validating the type, causing an invalid or NULL pointer dereference when processing malformed PKCS#7 data.

Impact summary: An application performing signature verification of PKCS#7 data or calling directly the PKCS7_digest_from_attributes() function can be caused to dereference an invalid or NULL pointer when reading, resulting in a Denial of Service.

The function PKCS7_digest_from_attributes() accesses the message digest attribute value without validating its type. When the type is not V_ASN1_OCTET_STRING, this results in accessing invalid memory through the ASN1_TYPE union, causing a crash.

Exploiting this vulnerability requires an attacker to provide a malformed signed PKCS#7 to an application that verifies it. The impact of the exploit is just a Denial of Service, the PKCS7 API is legacy and applications should be using the CMS API instead. For these reasons the issue was assessed as Low severity.

The FIPS modules in 3.5, 3.4, 3.3 and 3.0 are not affected by this issue, as the PKCS#7 parsing implementation is outside the OpenSSL FIPS module boundary.

OpenSSL 3.6, 3.5, 3.4, 3.3, 3.0, 1.1.1 and 1.0.2 are vulnerable to this issue.

• SECURITY UPDATE: DoS by providing specially crafted PKCS#7 data for signature verification
  • debian/patches/CVE-2026-22796.patch: ensure ASN1 types are checked before use
  • CVE-2026-22796

• SECURITY UPDATE: The trailing 1-15 bytes of a message may be exposed in<br>cleartext on encryption and are not covered by the authentication tag,<br>allowing an attacker to read or tamper with those bytes without detection
  • debian/patches/CVE-2025-69418.patch: fix OCB AES-NI/HW stream path unauthenticated/unencrypted trailing bytes
  • CVE-2025-69418
• SECURITY UPDATE: Invalid or NULL pointer dereference when processing malformed PKCS#7 data can result in a Denial of Service
  • debian/patches/CVE-2026-22796.patch: ensure ASN1 types are checked before use.
  • CVE-2026-22796
• SECURITY UPDATE: Processing a malformed PKCS#12 file can trigger a NULL pointer dereference
  • debian/patches/CVE-2025-69421.patch: Check oct argument for NULL
  • CVE-2025-69421

Stack buffer overflow in CMS AuthEnvelopedData parsing. (CVE-2025-15467) Heap out-of-bounds write in BIO_f_linebuffer on short writes. (CVE-2025-68160) Unauthenticated/unencrypted trailing bytes with low-level OCB function calls. (CVE-2025-69418) Out of bounds write in PKCS12_get_friendlyname() UTF-8 conversion. (CVE-2025-69419) Missing ASN1_TYPE validation in TS_RESP_verify_response() function. (CVE-2025-69420) NULL Pointer Dereference in PKCS12_item_decrypt_d2i_ex function. (CVE-2025-69421) Missing ASN1_TYPE validation in PKCS#12 parsing. (CVE-2026-22795) ASN1_TYPE Type Confusion in the PKCS7_digest_from_attributes() function. (CVE-2026-22796)

This update for openssl-3 fixes the following issues:

Security fixes:

• CVE-2025-11187: Improper validation of PBMAC1 parameters in PKCS#12 MAC verification (bsc#1256829).
• CVE-2025-15467: Stack buffer overflow in CMS AuthEnvelopedData parsing (bsc#1256830).
• CVE-2025-15468: NULL dereference in SSL_CIPHER_find() function on unknown cipher ID (bsc#1256831).
• CVE-2025-15469: "openssl dgst" one-shot codepath silently truncates inputs >16MB (bsc#1256832).
• CVE-2025-66199: TLS 1.3 CompressedCertificate excessive memory allocation (bsc#1256833).
• CVE-2025-68160: Heap out-of-bounds write in BIO_f_linebuffer on short writes (bsc#1256834).
• CVE-2025-69418: Unauthenticated/unencrypted trailing bytes with low-level OCB function calls (bsc#1256835).
• CVE-2025-69419: Out of bounds write in PKCS12_get_friendlyname() UTF-8 conversion (bsc#1256836).
• CVE-2025-69420: Missing ASN1_TYPE validation in TS_RESP_verify_response() function (bsc#1256837).
• CVE-2025-69421: NULL Pointer Dereference in PKCS12_item_decrypt_d2i_ex function (bsc#1256838).
• CVE-2026-22795: Missing ASN1_TYPE validation in PKCS#12 parsing (bsc#1256839).
• CVE-2026-22796: ASN1_TYPE Type Confusion in the PKCS7_digest_from_attributes() function (bsc#1256840).

Other fixes:

• Enable livepatching support for ppc64le (bsc#1257274).

This update for openssl-3 fixes the following issues:

• CVE-2025-15467: Stack buffer overflow in CMS AuthEnvelopedData parsing (bsc#1256830).
• CVE-2025-68160: Heap out-of-bounds write in BIO_f_linebuffer on short writes (bsc#1256834).
• CVE-2025-69418: Unauthenticated/unencrypted trailing bytes with low-level OCB function calls (bsc#1256835).
• CVE-2025-69419: Out of bounds write in PKCS12_get_friendlyname() UTF-8 conversion (bsc#1256836).
• CVE-2025-69420: Missing ASN1_TYPE validation in TS_RESP_verify_response() function (bsc#1256837).
• CVE-2025-69421: NULL Pointer Dereference in PKCS12_item_decrypt_d2i_ex function (bsc#1256838).
• CVE-2026-22795: Missing ASN1_TYPE validation in PKCS#12 parsing (bsc#1256839).
• CVE-2026-22796: ASN1_TYPE Type Confusion in the PKCS7_digest_from_attributes() function (bsc#1256840).

This update for openssl-3 fixes the following issues:

• CVE-2025-15467: Stack buffer overflow in CMS AuthEnvelopedData parsing (bsc#1256830).
• CVE-2025-68160: Heap out-of-bounds write in BIO_f_linebuffer on short writes (bsc#1256834).
• CVE-2025-69418: Unauthenticated/unencrypted trailing bytes with low-level OCB function calls (bsc#1256835).
• CVE-2025-69419: Out of bounds write in PKCS12_get_friendlyname() UTF-8 conversion (bsc#1256836).
• CVE-2025-69420: Missing ASN1_TYPE validation in TS_RESP_verify_response() function (bsc#1256837).
• CVE-2025-69421: NULL Pointer Dereference in PKCS12_item_decrypt_d2i_ex function (bsc#1256838).
• CVE-2026-22795: Missing ASN1_TYPE validation in PKCS#12 parsing (bsc#1256839).
• CVE-2026-22796: ASN1_TYPE Type Confusion in the PKCS7_digest_from_attributes() function (bsc#1256840).

This update for openssl-3 fixes the following issues:

• CVE-2025-15467: Stack buffer overflow in CMS AuthEnvelopedData parsing (bsc#1256830).
• CVE-2025-68160: Heap out-of-bounds write in BIO_f_linebuffer on short writes (bsc#1256834).
• CVE-2025-69418: Unauthenticated/unencrypted trailing bytes with low-level OCB function calls (bsc#1256835).
• CVE-2025-69419: Out of bounds write in PKCS12_get_friendlyname() UTF-8 conversion (bsc#1256836).
• CVE-2025-69420: Missing ASN1_TYPE validation in TS_RESP_verify_response() function (bsc#1256837).
• CVE-2025-69421: NULL Pointer Dereference in PKCS12_item_decrypt_d2i_ex function (bsc#1256838).
• CVE-2026-22795: Missing ASN1_TYPE validation in PKCS#12 parsing (bsc#1256839).
• CVE-2026-22796: ASN1_TYPE Type Confusion in the PKCS7_digest_from_attributes() function (bsc#1256840).

This update for openssl-3 fixes the following issues:

• CVE-2025-15467: Stack buffer overflow in CMS AuthEnvelopedData parsing (bsc#1256830).
• CVE-2025-68160: Heap out-of-bounds write in BIO_f_linebuffer on short writes (bsc#1256834).
• CVE-2025-69418: Unauthenticated/unencrypted trailing bytes with low-level OCB function calls (bsc#1256835).
• CVE-2025-69419: Out of bounds write in PKCS12_get_friendlyname() UTF-8 conversion (bsc#1256836).
• CVE-2025-69420: Missing ASN1_TYPE validation in TS_RESP_verify_response() function (bsc#1256837).
• CVE-2025-69421: NULL Pointer Dereference in PKCS12_item_decrypt_d2i_ex function (bsc#1256838).
• CVE-2026-22795: Missing ASN1_TYPE validation in PKCS#12 parsing (bsc#1256839).
• CVE-2026-22796: ASN1_TYPE Type Confusion in the PKCS7_digest_from_attributes() function (bsc#1256840).

This update for openssl-1_1 fixes the following issues:

• CVE-2026-22795: Missing ASN1_TYPE validation in PKCS#12 parsing (bsc#1256839).
• CVE-2025-69420: Missing ASN1_TYPE validation in TS_RESP_verify_response() function (bsc#1256837).
• CVE-2025-69421: NULL Pointer Dereference in PKCS12_item_decrypt_d2i_ex function (bsc#1256838).
• CVE-2026-22796: ASN1_TYPE Type Confusion in the PKCS7_digest_from_attributes() function (bsc#1256840).
• CVE-2025-68160: Heap out-of-bounds write in BIO_f_linebuffer on short writes (bsc#1256834).
• CVE-2025-69418: Unauthenticated/unencrypted trailing bytes with low-level OCB function calls (bsc#1256835).
• CVE-2025-69419: Out of bounds write in PKCS12_get_friendlyname() UTF-8 conversion (bsc#1256836).

This update for openssl-1_0_0 fixes the following issues:

• CVE-2025-68160: Heap out-of-bounds write in BIO_f_linebuffer on short writes (bsc#1256834).
• CVE-2025-69420: Missing ASN1_TYPE validation in TS_RESP_verify_response() function (bsc#1256837).
• CVE-2025-69421: NULL Pointer Dereference in PKCS12_item_decrypt_d2i_ex function (bsc#1256838).
• CVE-2026-22796: ASN1_TYPE Type Confusion in the PKCS7_digest_from_attributes() function (bsc#1256840).

This update for openssl-1_0_0 fixes the following issues:

• CVE-2025-68160: Heap out-of-bounds write in BIO_f_linebuffer on short writes (bsc#1256834).
• CVE-2025-69420: Missing ASN1_TYPE validation in TS_RESP_verify_response() function (bsc#1256837).
• CVE-2025-69421: NULL Pointer Dereference in PKCS12_item_decrypt_d2i_ex function (bsc#1256838).
• CVE-2026-22796: ASN1_TYPE Type Confusion in the PKCS7_digest_from_attributes() function (bsc#1256840).

This update for openssl-1_1 fixes the following issues:

• CVE-2026-22795: Missing ASN1_TYPE validation in PKCS#12 parsing (bsc#1256839).
• CVE-2025-69420: Missing ASN1_TYPE validation in TS_RESP_verify_response() function (bsc#1256837).
• CVE-2025-69421: NULL Pointer Dereference in PKCS12_item_decrypt_d2i_ex function (bsc#1256838).
• CVE-2026-22796: ASN1_TYPE Type Confusion in the PKCS7_digest_from_attributes() function (bsc#1256840).
• CVE-2025-68160: Heap out-of-bounds write in BIO_f_linebuffer on short writes (bsc#1256834).
• CVE-2025-69418: Unauthenticated/unencrypted trailing bytes with low-level OCB function calls (bsc#1256835).
• CVE-2025-69419: Out of bounds write in PKCS12_get_friendlyname() UTF-8 conversion (bsc#1256836).

This update for openssl-1_1 fixes the following issues:

• CVE-2026-22795: Missing ASN1_TYPE validation in PKCS#12 parsing (bsc#1256839).
• CVE-2025-69420: Missing ASN1_TYPE validation in TS_RESP_verify_response() function (bsc#1256837).
• CVE-2025-69421: NULL Pointer Dereference in PKCS12_item_decrypt_d2i_ex function (bsc#1256838).
• CVE-2026-22796: ASN1_TYPE Type Confusion in the PKCS7_digest_from_attributes() function (bsc#1256840).
• CVE-2025-68160: Heap out-of-bounds write in BIO_f_linebuffer on short writes (bsc#1256834).
• CVE-2025-69418: Unauthenticated/unencrypted trailing bytes with low-level OCB function calls (bsc#1256835).
• CVE-2025-69419: Out of bounds write in PKCS12_get_friendlyname() UTF-8 conversion (bsc#1256836).