CVE-2026-34988

Wasmtime is a runtime for WebAssembly. From 28.0.0 to before 36.0.7, 42.0.2, and 43.0.1, Wasmtime's implementation of its pooling allocator contains a bug where in certain configurations the contents of linear memory can be leaked from one instance to the next. The implementation of resetting the virtual memory permissions for linear memory used the wrong predicate to determine if resetting was necessary, where the compilation process used a different predicate. This divergence meant that the pooling allocator incorrectly deduced at runtime that resetting virtual memory permissions was not necessary while compile-time determine that virtual memory could be relied upon. The pooling allocator must be in use, Config::memory_guard_size configuration option must be 0, Config::memory_reservation configuration must be less than 4GiB, and pooling allocator must be configured with max_memory_size the same as the memory_reservation value in order to exploit this vulnerability. If all of these conditions are applicable then when a linear memory is reused the VM permissions of the previous iteration are not reset. This means that the compiled code, which is assuming out-of-bounds loads will segfault, will not actually segfault and can read the previous contents of linear memory if it was previously mapped. This represents a data leakage vulnerability between guest WebAssembly instances which breaks WebAssembly's semantics and additionally breaks the sandbox that Wasmtime provides. Wasmtime is not vulnerable to this issue with its default settings, nor with the default settings of the pooling allocator, but embeddings are still allowed to configure these values to cause this vulnerability. This vulnerability is fixed in 36.0.7, 42.0.2, and 43.0.1.

Wasmtime is a runtime for WebAssembly. From 28.0.0 to before 36.0.7, 42.0.2, and 43.0.1, Wasmtime's implementation of its pooling allocator contains a bug where in certain configurations the contents of linear memory can be leaked from one instance to the next. The implementation of resetting the virtual memory permissions for linear memory used the wrong predicate to determine if resetting was necessary, where the compilation process used a different predicate. This divergence meant that the pooling allocator incorrectly deduced at runtime that resetting virtual memory permissions was not necessary while compile-time determine that virtual memory could be relied upon. The pooling allocator must be in use, Config::memory_guard_size configuration option must be 0, Config::memory_reservation configuration must be less than 4GiB, and pooling allocator must be configured with max_memory_size the same as the memory_reservation value in order to exploit this vulnerability. If all of these conditions are applicable then when a linear memory is reused the VM permissions of the previous iteration are not reset. This means that the compiled code, which is assuming out-of-bounds loads will segfault, will not actually segfault and can read the previous contents of linear memory if it was previously mapped. This represents a data leakage vulnerability between guest WebAssembly instances which breaks WebAssembly's semantics and additionally breaks the sandbox that Wasmtime provides. Wasmtime is not vulnerable to this issue with its default settings, nor with the default settings of the pooling allocator, but embeddings are still allowed to configure these values to cause this vulnerability. This vulnerability is fixed in 36.0.7, 42.0.2, and 43.0.1.

Impact

Wasmtime's implementation of its pooling allocator contains a bug where in certain configurations the contents of linear memory can be leaked from one instance to the next. The implementation of resetting the virtual memory permissions for linear memory used the wrong predicate to determine if resetting was necessary, where the compilation process used a different predicate. This divergence meant that the pooling allocator incorrectly deduced at runtime that resetting virtual memory permissions was not necessary while compile-time determine that virtual memory could be relied upon.

Exposing this bug requires specific configuration values to be used. If any of these configurations are not applicable then this bug does not happen:

• The pooling allocator must be in use.
• The Config::memory_guard_size configuration option must be 0.
• The Config::memory_reservation configuration must be less than 4GiB.
• The pooling allocator must be configured with max_memory_size the same as the memory_reservation value.

If all of these conditions are applicable then when a linear memory is reused the VM permissions of the previous iteration are not reset. This means that the compiled code, which is assuming out-of-bounds loads will segfault, will not actually segfault and can read the previous contents of linear memory if it was previously mapped.

This represents a data leakage vulnerability between guest WebAssembly instances which breaks WebAssembly's semantics and additionally breaks the sandbox that Wasmtime provides. Wasmtime is not vulnerable to this issue with its default settings, nor with the default settings of the pooling allocator, but embeddings are still allowed to configure these values to cause this vulnerability.

Patches

Wasmtime 36.0.7, 42.0.2, and 43.0.1 have been issued to fix this bug. Users are recommended to update to these patched versions of Wasmtime.

Workarounds

All four conditions above must be met to be vulnerable to this bug, and users can work around this bug by adjusting any of the above conditions. For example it is strongly recommended that guard pages are configured for linear memories which would make this bug not applicable.

Wasmtime is a runtime for WebAssembly. From 28.0.0 to before 36.0.7, 42.0.2, and 43.0.1, Wasmtime's implementation of its pooling allocator contains a bug where in certain configurations the contents of linear memory can be leaked from one instance to the next. The implementation of resetting the virtual memory permissions for linear memory used the wrong predicate to determine if resetting was necessary, where the compilation process used a different predicate. This divergence meant that the pooling allocator incorrectly deduced at runtime that resetting virtual memory permissions was not necessary while compile-time determine that virtual memory could be relied upon. The pooling allocator must be in use, Config::memory_guard_size configuration option must be 0, Config::memory_reservation configuration must be less than 4GiB, and pooling allocator must be configured with max_memory_size the same as the memory_reservation value in order to exploit this vulnerability. If all of these conditions are applicable then when a linear memory is reused the VM permissions of the previous iteration are not reset. This means that the compiled code, which is assuming out-of-bounds loads will segfault, will not actually segfault and can read the previous contents of linear memory if it was previously mapped. This represents a data leakage vulnerability between guest WebAssembly instances which breaks WebAssembly's semantics and additionally breaks the sandbox that Wasmtime provides. Wasmtime is not vulnerable to this issue with its default settings, nor with the default settings of the pooling allocator, but embeddings are still allowed to configure these values to cause this vulnerability. This vulnerability is fixed in 36.0.7, 42.0.2, and 43.0.1.

Wasmtime is a runtime for WebAssembly. From 28.0.0 to before 36.0.7, 42.0.2, and 43.0.1, Wasmtime's implementation of its pooling allocator contains a bug where in certain configurations the contents of linear memory can be leaked from one instance to the next. The implementation of resetting the virtual memory permissions for linear memory used the wrong predicate to determine if resetting was necessary, where the compilation process used a different predicate. This divergence meant that the pooling allocator incorrectly deduced at runtime that resetting virtual memory permissions was not necessary while compile-time determine that virtual memory could be relied upon. The pooling allocator must be in use, Config::memory_guard_size configuration option must be 0, Config::memory_reservation configuration must be less than 4GiB, and pooling allocator must be configured with max_memory_size the same as the memory_reservation value in order to exploit this vulnerability. If all of these conditions are applicable then when a linear memory is reused the VM permissions of the previous iteration are not reset. This means that the compiled code, which is assuming out-of-bounds loads will segfault, will not actually segfault and can read the previous contents of linear memory if it was previously mapped. This represents a data leakage vulnerability between guest WebAssembly instances which breaks WebAssembly's semantics and additionally breaks the sandbox that Wasmtime provides. Wasmtime is not vulnerable to this issue with its default settings, nor with the default settings of the pooling allocator, but embeddings are still allowed to configure these values to cause this vulnerability. This vulnerability is fixed in 36.0.7, 42.0.2, and 43.0.1.

Wasmtime is a runtime for WebAssembly. From 28.0.0 to before 36.0.7, 42.0.2, and 43.0.1, Wasmtime's implementation of its pooling allocator contains a bug where in certain configurations the contents of linear memory can be leaked from one instance to the next. The implementation of resetting the virtual memory permissions for linear memory used the wrong predicate to determine if resetting was necessary, where the compilation process used a different predicate. This divergence meant that the pooling allocator incorrectly deduced at runtime that resetting virtual memory permissions was not necessary while compile-time determine that virtual memory could be relied upon. The pooling allocator must be in use, Config::memory_guard_size configuration option must be 0, Config::memory_reservation configuration must be less than 4GiB, and pooling allocator must be configured with max_memory_size the same as the memory_reservation value in order to exploit this vulnerability. If all of these conditions are applicable then when a linear memory is reused the VM permissions of the previous iteration are not reset. This means that the compiled code, which is assuming out-of-bounds loads will segfault, will not actually segfault and can read the previous contents of linear memory if it was previously mapped. This represents a data leakage vulnerability between guest WebAssembly instances which breaks WebAssembly's semantics and additionally breaks the sandbox that Wasmtime provides. Wasmtime is not vulnerable to this issue with its default settings, nor with the default settings of the pooling allocator, but embeddings are still allowed to configure these values to cause this vulnerability. This vulnerability is fixed in 36.0.7, 42.0.2, and 43.0.1.