CVE-2026-54058

Summary

When Pillow loads an uncompressed image whose tile uses the raw codec and a mode in Image._MAPMODES, and the image was opened from a filename, it memory-maps the file and builds the image's row pointers directly into the mapping via PyImaging_MapBuffer (src/map.c). The per-row spacing (stride) is taken from the tile arguments. map.c validates offset + ysize*stride <= buffer_len but never checks that stride is at least the natural row width xsize * pixelsize.

The McIdas AREA plugin (McIdasImagePlugin.py) derives stride, offset, xsize, and ysize directly from attacker-controlled 32-bit header words with no validation. By supplying a stride far smaller than the row width, an attacker makes each row pointer read xsize*pixelsize bytes that run past the mapped region. Accessing the pixels (e.g. Image.tobytes(), getpixel, convert, save) then reads adjacent process memory (information disclosure) or faults (SIGBUS, denial of service).

Complete Code Trace

Step 1: McIdasImageFile._open - turns attacker header words into image size, file offset, and row stride with no validation.

# src/PIL/McIdasImagePlugin.py:41-70
s = self.fp.read(256)
if not _accept(s) or len(s) != 256:        # _accept: prefix == b"\x00\x00\x00\x00\x00\x00\x00\x04"
    raise SyntaxError(...)
self.area_descriptor = w = [0, *struct.unpack("!64i", s)]   # w[1..64] = signed BE int32, ALL attacker-controlled

if w[11] == 1:
    mode = rawmode = "L"                    # pixelsize 1, in _MAPMODES
elif w[11] == 2:
    mode = rawmode = "I;16B"                # pixelsize 2, in _MAPMODES
...
self._mode = mode
self._size = w[10], w[9]                    # (xsize, ysize)  <-- attacker
offset = w[34] + w[15]                       # <-- attacker
stride = w[15] + w[10] * w[11] * w[14]       # <-- attacker (set w[14]=0, w[15]=1 => stride=1)
self.tile = [
    ImageFile._Tile("raw", (0, 0) + self.size, offset, (rawmode, stride, 1))
]

Step 2: ImageFile.load (mmap branch) - selects mmap and delegates to map_buffer.

# src/PIL/ImageFile.py:322-348
if use_mmap:                                 # use_mmap = self.filename and len(self.tile) == 1
    decoder_name, extents, offset, args = self.tile[0]
    if (decoder_name == "raw" and isinstance(args, tuple) and len(args) >= 3
            and args[0] == self.mode and args[0] in Image._MAPMODES):
        if offset < 0:                       # only lower-bound guard on offset
            raise ValueError("Tile offset cannot be negative")
        with open(self.filename) as fp:
            self.map = mmap.mmap(fp.fileno(), 0, access=mmap.ACCESS_READ)
        if offset + self.size[1] * args[1] > self.map.size():   # == offset + ysize*stride; NO stride>=linesize check
            raise OSError("buffer is not large enough")
        self.im = Image.core.map_buffer(
            self.map, self.size, decoder_name, offset, args      # args = ("L", stride, 1)
        )

Step 3: PyImaging_MapBuffer - builds row pointers at stride spacing into the mmap; validates everything except stride >= row width.

/* src/map.c:65-140 */
if (!PyArg_ParseTuple(args, "O(ii)sn(sii)",
        &target, &xsize, &ysize, &codec, &offset, &mode_name, &stride, &ystep))
    return NULL;
...
const ModeID mode = findModeID(mode_name);          /* "L" */

if (stride <= 0) {                                  /* attacker sets stride=1 (>0) -> NOT recomputed */
    if (mode == IMAGING_MODE_L || mode == IMAGING_MODE_P) stride = xsize;
    else if (isModeI16(mode)) stride = xsize * 2;
    else stride = xsize * 4;
}

if (stride > 0 && ysize > PY_SSIZE_T_MAX / stride) {/* overflow guard only */
    PyErr_SetString(PyExc_MemoryError, "Integer overflow in ysize"); return NULL;
}
size = (Py_ssize_t)ysize * stride;                  /* = 1*1 = 1 */

if (offset > PY_SSIZE_T_MAX - size) { ... }
...
if (offset + size > view.len) {                     /* 1 + 1 = 2 <= 256…

Pillow is the friendly PIL fork by Alex Clark and Contributors. PIL is the Python Imaging \ Library by Fredrik Lundh and Contributors. As of 2019, Pillow development is supported by Tidelift. of CVE-2022-22815,CVE-2022-22816)

Security Fix(es):

Pillow is a Python imaging library. Prior to 12.3.0, when Pillow loads an uncompressed McIdas AREA image from a filename through the mmap raw codec path, attacker-controlled header words can set a row stride smaller than the natural row width, causing pixel access such as Image.tobytes(), getpixel, convert, or save to read beyond the mapped region and disclose adjacent process memory or fault. This issue is fixed in version 12.3.0.(CVE-2026-54058)

Pillow is a Python imaging library. Prior to 12.3.0, Pillow's public rank-filter API can trigger a native heap out-of-bounds write when given a very large odd filter size because ImageFilter.RankFilter.filter() calls image.expand(size // 2, size // 2) before rank-filter size validation and ImagingExpand() computes output dimensions with unchecked signed int arithmetic. This issue is fixed in version 12.3.0.(CVE-2026-59197)

Pillow is a Python imaging library. From 5.2.0 until 12.3.0, Pillow's TGA RLE encoder reads past its packed row buffer when saving a mode 1 image with TGA RLE compression, allowing adjacent process heap bytes to be copied into the generated TGA file. This issue is fixed in version 12.3.0.(CVE-2026-59198)

Pillow is a Python imaging library. Prior to 12.3.0, Pillow public image coordinate APIs can trigger a native heap out-of-bounds write when given coordinates near the signed 32-bit integer limits in Image.paste(), Image.crop(), or Image.alpha_composite(). This issue is fixed in version 12.3.0.(CVE-2026-59199)

Pillow is a Python imaging library. Prior to 12.3.0, Pillow's ImageCms.ImageCmsTransform.apply(im, imOut) API can trigger controlled native heap corruption when the caller supplies an output image whose mode does not match the transform's declared output mode. This issue is fixed in version 12.3.0.(CVE-2026-59205)

Pillow is the friendly PIL fork by Alex Clark and Contributors. PIL is the Python Imaging \ Library by Fredrik Lundh and Contributors. As of 2019, Pillow development is supported by Tidelift. of CVE-2022-22815,CVE-2022-22816)

Security Fix(es):

Pillow is a Python imaging library. Prior to 12.3.0, when Pillow loads an uncompressed McIdas AREA image from a filename through the mmap raw codec path, attacker-controlled header words can set a row stride smaller than the natural row width, causing pixel access such as Image.tobytes(), getpixel, convert, or save to read beyond the mapped region and disclose adjacent process memory or fault. This issue is fixed in version 12.3.0.(CVE-2026-54058)

Pillow is a Python imaging library. Prior to 12.3.0, Pillow's public rank-filter API can trigger a native heap out-of-bounds write when given a very large odd filter size because ImageFilter.RankFilter.filter() calls image.expand(size // 2, size // 2) before rank-filter size validation and ImagingExpand() computes output dimensions with unchecked signed int arithmetic. This issue is fixed in version 12.3.0.(CVE-2026-59197)

Pillow is a Python imaging library. Prior to 12.3.0, Pillow public image coordinate APIs can trigger a native heap out-of-bounds write when given coordinates near the signed 32-bit integer limits in Image.paste(), Image.crop(), or Image.alpha_composite(). This issue is fixed in version 12.3.0.(CVE-2026-59199)

Pillow is a Python imaging library. From 5.1.0 until 12.3.0, PdfParser.PdfStream.decode() in PIL/PdfParser.py calls zlib.decompress() with bufsize set to the PDF stream Length field without bounding the decompressed output size, allowing a crafted FlateDecode PDF stream to exhaust memory from a small file. This issue is fixed in version 12.3.0.(CVE-2026-59200)

Pillow is a Python imaging library. Prior to 12.3.0, Pillow's ImageCms.ImageCmsTransform.apply(im, imOut) API can trigger controlled native heap corruption when the caller supplies an output image whose mode does not match the transform's declared output mode. This issue is fixed in version 12.3.0.(CVE-2026-59205)

Pillow is the friendly PIL fork by Alex Clark and Contributors. PIL is the Python Imaging \ Library by Fredrik Lundh and Contributors. As of 2019, Pillow development is supported by Tidelift. of CVE-2022-22815,CVE-2022-22816)

Security Fix(es):

Pillow is a Python imaging library. Prior to 12.3.0, when Pillow loads an uncompressed McIdas AREA image from a filename through the mmap raw codec path, attacker-controlled header words can set a row stride smaller than the natural row width, causing pixel access such as Image.tobytes(), getpixel, convert, or save to read beyond the mapped region and disclose adjacent process memory or fault. This issue is fixed in version 12.3.0.(CVE-2026-54058)

Pillow is a Python imaging library. From 5.2.0 until 12.3.0, Pillow's TGA RLE encoder reads past its packed row buffer when saving a mode 1 image with TGA RLE compression, allowing adjacent process heap bytes to be copied into the generated TGA file. This issue is fixed in version 12.3.0.(CVE-2026-59198)

Pillow is a Python imaging library. Prior to 12.3.0, Pillow public image coordinate APIs can trigger a native heap out-of-bounds write when given coordinates near the signed 32-bit integer limits in Image.paste(), Image.crop(), or Image.alpha_composite(). This issue is fixed in version 12.3.0.(CVE-2026-59199)

Pillow is a Python imaging library. Prior to 12.3.0, Pillow's ImageCms.ImageCmsTransform.apply(im, imOut) API can trigger controlled native heap corruption when the caller supplies an output image whose mode does not match the transform's declared output mode. This issue is fixed in version 12.3.0.(CVE-2026-59205)

Pillow is the friendly PIL fork by Alex Clark and Contributors. PIL is the Python Imaging \ Library by Fredrik Lundh and Contributors. As of 2019, Pillow development is supported by Tidelift. of CVE-2022-22815,CVE-2022-22816)

Security Fix(es):

Pillow is a Python imaging library. Prior to 12.3.0, when Pillow loads an uncompressed McIdas AREA image from a filename through the mmap raw codec path, attacker-controlled header words can set a row stride smaller than the natural row width, causing pixel access such as Image.tobytes(), getpixel, convert, or save to read beyond the mapped region and disclose adjacent process memory or fault. This issue is fixed in version 12.3.0.(CVE-2026-54058)

Pillow is a Python imaging library. From 5.2.0 until 12.3.0, Pillow's TGA RLE encoder reads past its packed row buffer when saving a mode 1 image with TGA RLE compression, allowing adjacent process heap bytes to be copied into the generated TGA file. This issue is fixed in version 12.3.0.(CVE-2026-59198)

Pillow is a Python imaging library. Prior to 12.3.0, Pillow public image coordinate APIs can trigger a native heap out-of-bounds write when given coordinates near the signed 32-bit integer limits in Image.paste(), Image.crop(), or Image.alpha_composite(). This issue is fixed in version 12.3.0.(CVE-2026-59199)

Pillow is a Python imaging library. Prior to 12.3.0, Pillow's ImageCms.ImageCmsTransform.apply(im, imOut) API can trigger controlled native heap corruption when the caller supplies an output image whose mode does not match the transform's declared output mode. This issue is fixed in version 12.3.0.(CVE-2026-59205)

Pillow is the friendly PIL fork by Alex Clark and Contributors. PIL is the Python Imaging \ Library by Fredrik Lundh and Contributors. As of 2019, Pillow development is supported by Tidelift. of CVE-2022-22815,CVE-2022-22816)

Security Fix(es):

Pillow is a Python imaging library. Prior to 12.3.0, when Pillow loads an uncompressed McIdas AREA image from a filename through the mmap raw codec path, attacker-controlled header words can set a row stride smaller than the natural row width, causing pixel access such as Image.tobytes(), getpixel, convert, or save to read beyond the mapped region and disclose adjacent process memory or fault. This issue is fixed in version 12.3.0.(CVE-2026-54058)

Pillow is a Python imaging library. Prior to 12.3.0, Pillow's public rank-filter API can trigger a native heap out-of-bounds write when given a very large odd filter size because ImageFilter.RankFilter.filter() calls image.expand(size // 2, size // 2) before rank-filter size validation and ImagingExpand() computes output dimensions with unchecked signed int arithmetic. This issue is fixed in version 12.3.0.(CVE-2026-59197)

Pillow is a Python imaging library. From 5.2.0 until 12.3.0, Pillow's TGA RLE encoder reads past its packed row buffer when saving a mode 1 image with TGA RLE compression, allowing adjacent process heap bytes to be copied into the generated TGA file. This issue is fixed in version 12.3.0.(CVE-2026-59198)

Pillow is a Python imaging library. Prior to 12.3.0, Pillow public image coordinate APIs can trigger a native heap out-of-bounds write when given coordinates near the signed 32-bit integer limits in Image.paste(), Image.crop(), or Image.alpha_composite(). This issue is fixed in version 12.3.0.(CVE-2026-59199)

Pillow is a Python imaging library. Prior to 12.3.0, Pillow's ImageCms.ImageCmsTransform.apply(im, imOut) API can trigger controlled native heap corruption when the caller supplies an output image whose mode does not match the transform's declared output mode. This issue is fixed in version 12.3.0.(CVE-2026-59205)

Summary

When Pillow loads an uncompressed image whose tile uses the raw codec and a mode in Image._MAPMODES, and the image was opened from a filename, it memory-maps the file and builds the image's row pointers directly into the mapping via PyImaging_MapBuffer (src/map.c). The per-row spacing (stride) is taken from the tile arguments. map.c validates offset + ysize*stride <= buffer_len but never checks that stride is at least the natural row width xsize * pixelsize.

The McIdas AREA plugin (McIdasImagePlugin.py) derives stride, offset, xsize, and ysize directly from attacker-controlled 32-bit header words with no validation. By supplying a stride far smaller than the row width, an attacker makes each row pointer read xsize*pixelsize bytes that run past the mapped region. Accessing the pixels (e.g. Image.tobytes(), getpixel, convert, save) then reads adjacent process memory (information disclosure) or faults (SIGBUS, denial of service).

Complete Code Trace

Step 1: McIdasImageFile._open - turns attacker header words into image size, file offset, and row stride with no validation.

# src/PIL/McIdasImagePlugin.py:41-70
s = self.fp.read(256)
if not _accept(s) or len(s) != 256:        # _accept: prefix == b"\x00\x00\x00\x00\x00\x00\x00\x04"
    raise SyntaxError(...)
self.area_descriptor = w = [0, *struct.unpack("!64i", s)]   # w[1..64] = signed BE int32, ALL attacker-controlled

if w[11] == 1:
    mode = rawmode = "L"                    # pixelsize 1, in _MAPMODES
elif w[11] == 2:
    mode = rawmode = "I;16B"                # pixelsize 2, in _MAPMODES
...
self._mode = mode
self._size = w[10], w[9]                    # (xsize, ysize)  <-- attacker
offset = w[34] + w[15]                       # <-- attacker
stride = w[15] + w[10] * w[11] * w[14]       # <-- attacker (set w[14]=0, w[15]=1 => stride=1)
self.tile = [
    ImageFile._Tile("raw", (0, 0) + self.size, offset, (rawmode, stride, 1))
]

Step 2: ImageFile.load (mmap branch) - selects mmap and delegates to map_buffer.

# src/PIL/ImageFile.py:322-348
if use_mmap:                                 # use_mmap = self.filename and len(self.tile) == 1
    decoder_name, extents, offset, args = self.tile[0]
    if (decoder_name == "raw" and isinstance(args, tuple) and len(args) >= 3
            and args[0] == self.mode and args[0] in Image._MAPMODES):
        if offset < 0:                       # only lower-bound guard on offset
            raise ValueError("Tile offset cannot be negative")
        with open(self.filename) as fp:
            self.map = mmap.mmap(fp.fileno(), 0, access=mmap.ACCESS_READ)
        if offset + self.size[1] * args[1] > self.map.size():   # == offset + ysize*stride; NO stride>=linesize check
            raise OSError("buffer is not large enough")
        self.im = Image.core.map_buffer(
            self.map, self.size, decoder_name, offset, args      # args = ("L", stride, 1)
        )

Step 3: PyImaging_MapBuffer - builds row pointers at stride spacing into the mmap; validates everything except stride >= row width.

/* src/map.c:65-140 */
if (!PyArg_ParseTuple(args, "O(ii)sn(sii)",
        &target, &xsize, &ysize, &codec, &offset, &mode_name, &stride, &ystep))
    return NULL;
...
const ModeID mode = findModeID(mode_name);          /* "L" */

if (stride <= 0) {                                  /* attacker sets stride=1 (>0) -> NOT recomputed */
    if (mode == IMAGING_MODE_L || mode == IMAGING_MODE_P) stride = xsize;
    else if (isModeI16(mode)) stride = xsize * 2;
    else stride = xsize * 4;
}

if (stride > 0 && ysize > PY_SSIZE_T_MAX / stride) {/* overflow guard only */
    PyErr_SetString(PyExc_MemoryError, "Integer overflow in ysize"); return NULL;
}
size = (Py_ssize_t)ysize * stride;                  /* = 1*1 = 1 */

if (offset > PY_SSIZE_T_MAX - size) { ... }
...
if (offset + size > view.len) {                     /* 1 + 1 = 2 <= 256…

Python is an interpreted, interactive, object-oriented programming language, which includes modules, classes, exceptions, very high level dynamic data types and dynamic typing. Python supports interfaces to many system calls and libraries, as well as to various windowing systems.

Security Fix(es):

• Pillow: Pillow: Native heap out-of-bounds write (CVE-2026-59197)

• Pillow: Pillow: Memory disclosure or denial of service via crafted McIdas AREA image (CVE-2026-54058)

For more details about the security issue(s), including the impact, a CVSS score, acknowledgments, and other related information, refer to the CVE page(s) listed in the References section.

Pillow is a Python imaging library. Prior to 12.3.0, when Pillow loads an uncompressed McIdas AREA image from a filename through the mmap raw codec path, attacker-controlled header words can set a row stride smaller than the natural row width, causing pixel access such as Image.tobytes(), getpixel, convert, or save to read beyond the mapped region and disclose adjacent process memory or fault. This issue is fixed in version 12.3.0.

Python is an interpreted, interactive, object-oriented programming language, which includes modules, classes, exceptions, very high level dynamic data types and dynamic typing. Python supports interfaces to many system calls and libraries, as well as to various windowing systems.

Security Fix(es):

• Pillow: Pillow: Native heap out-of-bounds write (CVE-2026-59197)
• Pillow: Pillow: Memory disclosure or denial of service via crafted McIdas AREA image (CVE-2026-54058)

For more details about the security issue(s), including the impact, a CVSS score, acknowledgments, and other related information, refer to the CVE page(s) listed in the References section.

Pillow is a Python imaging library. Prior to 12.3.0, when Pillow loads an uncompressed McIdas AREA image from a filename through the mmap raw codec path, attacker-controlled header words can set a row stride smaller than the natural row width, causing pixel access such as Image.tobytes(), getpixel, convert, or save to read beyond the mapped region and disclose adjacent process memory or fault. This issue is fixed in version 12.3.0.

TuxCare rebuilt pillow to address 9 CVEs. Fixed in 11.2.1.post4+tuxcare.

TuxCare rebuilt pillow to address 2 CVEs. Fixed in 10.4.0.post5+tuxcare.

TuxCare rebuilt pillow to address 5 CVEs. Fixed in 9.5.0.post3+tuxcare.

TuxCare rebuilt pillow to address 4 CVEs. Fixed in 9.4.0.post5+tuxcare.

TuxCare rebuilt pillow to address 14 CVEs. Fixed in 11.3.0.post5+tuxcare.

TuxCare rebuilt pillow to address 3 CVEs. Fixed in 8.4.0.post2+tuxcare.

• SECURITY UPDATE: heap out-of-bounds write via paste box coordinates near the signed 32-bit integer limits (ELSCVE-233283)
  • debian/patches/CVE-2026-59199.patch: compute the paste box dimensions as int64_t in ImagingPaste() and ImagingFill2() in src/libImaging/Paste.c. Adds a regression test in Tests/test_image_paste.py.
  • CVE-2026-59199
• SECURITY UPDATE: out-of-bounds read when memory-mapping McIdas AREA images with an undersized row stride (ELSCVE-233312)
  • debian/patches/CVE-2026-54058.patch: raise the row stride to at least one full row of pixels in PyImaging_MapBuffer() in src/map.c. Adds a regression test in Tests/test_file_mcidas.py.
  • CVE-2026-54058

Prevent decompression bomb when parsing PDF WindowsViewer.get_command injection EPS image infinite loop JPEG2000 image memory usage McIdas out-of-bounds (OOB) read Out-of-bounds (OOB) read when saving 1 mode TGA images Out-of-bounds (OOB) write from large RankFilter sizes Out-of-bounds (OOB) write from Image.paste() Out-of-bounds (OOB) write in ImageCmsTransform Prevent FontFile decompression bomb Prevent GD decompression bomb

These are all security issues fixed in the python313-Pillow-12.3.0-2.1 package on the GA media of openSUSE Tumbleweed.

These are all security issues fixed in the python313-graphifyy-0.9.65-1.1 package on the GA media of openSUSE Tumbleweed.

This update for python-Pillow fixes the following issues

• CVE-2026-54058: out-of-bounds read via attacker-controlled row stride on mmap path (bsc#1271419).
• CVE-2026-59197: heap out-of-bounds write in ImageFilter.RankFilter via integer overflow in ImagingExpand (bsc#1271418).
• CVE-2026-59198: out-of-bounds heap data copied into file generated by TGA RLE encoder (bsc#1271420).
• CVE-2026-59199: heap out-of-bounds write in Image.paste() and Image.crop() via signed coordinate overflow (bsc#1271421).
• CVE-2026-59200: decompression bomb DoS via PdfParser.PdfStream.decode() (bsc#1271422).
• CVE-2026-59204: denial of service through memory exhaustion via JPEG2000 tiled decoder (bsc#1271424).
• CVE-2026-59205: controlled heap out-of-bounds write in ImageCmsTransform.apply() via output mode mismatch (bsc#1271425).

Root has patched CVE-2026-54058 in the pillow package for Root:PyPI. Multiple fixed versions available.

This update for python-Pillow fixes the following issues

• CVE-2026-54058: out-of-bounds read via attacker-controlled row stride on mmap path (bsc#1271419).
• CVE-2026-59197: heap out-of-bounds write in ImageFilter.RankFilter via integer overflow in ImagingExpand (bsc#1271418).
• CVE-2026-59198: out-of-bounds heap data copied into file generated by TGA RLE encoder (bsc#1271420).
• CVE-2026-59199: heap out-of-bounds write in Image.paste() and Image.crop() via signed coordinate overflow (bsc#1271421).
• CVE-2026-59200: decompression bomb DoS via PdfParser.PdfStream.decode() (bsc#1271422).
• CVE-2026-59204: denial of service through memory exhaustion via JPEG2000 tiled decoder (bsc#1271424).
• CVE-2026-59205: controlled heap out-of-bounds write in ImageCmsTransform.apply() via output mode mismatch (bsc#1271425).

This update for python-Pillow fixes the following issues

• CVE-2026-54058: out-of-bounds read via attacker-controlled row stride on mmap path (bsc#1271419).
• CVE-2026-59197: heap out-of-bounds write in ImageFilter.RankFilter via integer overflow in ImagingExpand (bsc#1271418).
• CVE-2026-59198: out-of-bounds heap data copied into file generated by TGA RLE encoder (bsc#1271420).
• CVE-2026-59199: heap out-of-bounds write in Image.paste() and Image.crop() via signed coordinate overflow (bsc#1271421).
• CVE-2026-59200: decompression bomb DoS via PdfParser.PdfStream.decode() (bsc#1271422).
• CVE-2026-59204: denial of service through memory exhaustion via JPEG2000 tiled decoder (bsc#1271424).
• CVE-2026-59205: controlled heap out-of-bounds write in ImageCmsTransform.apply() via output mode mismatch (bsc#1271425).

This update for python-Pillow fixes the following issues

• CVE-2026-54058: out-of-bounds read via attacker-controlled row stride on mmap path (bsc#1271419).
• CVE-2026-59197: heap out-of-bounds write in ImageFilter.RankFilter via integer overflow in ImagingExpand (bsc#1271418).
• CVE-2026-59198: out-of-bounds heap data copied into file generated by TGA RLE encoder (bsc#1271420).
• CVE-2026-59199: heap out-of-bounds write in Image.paste() and Image.crop() via signed coordinate overflow (bsc#1271421).
• CVE-2026-59200: decompression bomb DoS via PdfParser.PdfStream.decode() (bsc#1271422).
• CVE-2026-59204: denial of service through memory exhaustion via JPEG2000 tiled decoder (bsc#1271424).
• CVE-2026-59205: controlled heap out-of-bounds write in ImageCmsTransform.apply() via output mode mismatch

This update for python-Pillow fixes the following issues:

• CVE-2026-54058: out-of-bounds read via attacker-controlled row stride on mmap path (bsc#1271419).
• CVE-2026-54059: bomb protection bypass via PCF font loading due to Image.frombytes() being called without _decompression_bomb_check() (bsc#1270409).
• CVE-2026-54060: excessive allocation due to FontFile.compile(): Image.new() being called without _decompression_bomb_check() (bsc#1270410).
• CVE-2026-55379: bomb protection bypass via font loading due to Image.new() being called without _decompression_bomb_check() (bsc#1270411).
• CVE-2026-55380: unchecked 4.3 GB C-heap allocation due to image dimensions being accepted without _decompression_bomb_check() in GdImageFile._open() (bsc#1270412).
• CVE-2026-59197: heap out-of-bounds write in ImageFilter.RankFilter via integer overflow in ImagingExpand (bsc#1271418).
• CVE-2026-59198: out-of-bounds heap data copied into file generated by TGA RLE encoder (bsc#1271420).
• CVE-2026-59199: heap out-of-bounds write in Image.paste() and Image.crop() via signed coordinate overflow (bsc#1271421).
• CVE-2026-59200: decompression bomb DoS via PdfParser.PdfStream.decode() (bsc#1271422).
• CVE-2026-59204: denial of service through memory exhaustion via JPEG2000 tiled decoder (bsc#1271424).
• CVE-2026-59205: controlled heap out-of-bounds write in ImageCmsTransform.apply() via output mode mismatch (bsc#1271425).

It was discovered that Pillow incorrectly handled map stride values when loading certain McIdas AREA images. An attacker could possibly use this issue to obtain sensitive information or cause a denial of service. (CVE-2026-54058)

It was discovered that Pillow did not properly check for decompression bombs when processing font files. An attacker could possibly use this issue to cause Pillow to consume excessive memory, resulting in a denial of service. (CVE-2026-54059, CVE-2026-54060, CVE-2026-55379)

It was discovered that Pillow did not properly check for decompression bombs when loading GD image files. An attacker could possibly use this issue to cause Pillow to consume excessive memory, resulting in a denial of service. (CVE-2026-55380)

It was discovered that Pillow incorrectly validated filter sizes in the rank filter implementation. An attacker could possibly use this issue to cause Pillow to crash or execute arbitrary code. (CVE-2026-59197)

It was discovered that Pillow incorrectly handled image coordinate calculations. An attacker could possibly use this issue to cause Pillow to crash. (CVE-2026-59199)

It was discovered that Pillow did not properly limit the size of decompressed PDF stream data. An attacker could possibly use this issue to cause Pillow to consume excessive memory, resulting in a denial of service. (CVE-2026-59200)

It was discovered that Pillow incorrectly parsed EPS files containing a negative byte count in the BeginBinary directive. An attacker could possibly use this issue to cause Pillow to hang, resulting in a denial of service. This issue only affected Ubuntu 26.04 LTS. (CVE-2026-59203)

It was discovered that Pillow incorrectly accumulated JPEG2000 tile component widths. An attacker could possibly use this issue to cause Pillow to consume excessive memory, resulting in a denial of service. (CVE-2026-59204)

It was discovered that Pillow incorrectly validated image mode compatibility in color management transforms. An attacker could possibly use this issue to cause Pillow to crash or execute arbitrary code. (CVE-2026-59205)