CVE-2026-78551
RansomLook Login Endpoint Allows Timing-Based Username Enumeration and Unthrottled Authentication Attempts
RansomLook contains multiple weaknesses in its authentication endpoint that allow an unauthenticated remote attacker to enumerate valid usernames, perform unrestricted password-guessing attacks, and potentially exhaust application worker resources.
For local authentication, the login implementation previously checked whether a submitted username existed before invoking the password hash verification function. Requests containing a nonexistent username therefore returned significantly faster than requests for valid accounts, for which the computationally expensive password verification routine was executed. A remote attacker could measure these response-time differences to determine which usernames correspond to valid RansomLook accounts.
In addition, the /login endpoint did not restrict the number or frequency of failed authentication attempts. An attacker could consequently perform password brute-force, dictionary, password-spraying, or credential-stuffing attacks against known accounts without server-side throttling. For valid usernames, each authentication attempt also invokes the password key-derivation function, which consumes a significant amount of CPU time. A sufficiently high rate of login attempts could therefore occupy the application's synchronous Gunicorn workers and cause a denial of service affecting the entire application.
The issue has been addressed by always performing password verification using a randomly generated dummy password hash when the supplied username does not exist, eliminating the username-dependent timing discrepancy. Failed authentication attempts are additionally rate-limited per client IP address using Valkey/Redis, with five failed attempts within five minutes resulting in a one-hour block. The reverse-proxy configuration was also updated so that the application derives the client address from a trusted X-Forwarded-For value that cannot be overridden by a client-supplied header.
Attack profile
How easy it is to exploit
- Attack vector
- Network
- Complexity
- Low
- Privileges needed
- None
- User interaction
- None
What an attacker can affect
- Confidentiality
- Low
- Integrity
- None
- Availability
- High
Exploit likelihood
What each source reports
CVE List Score used
8.8
RansomLook Login Endpoint Allows Timing-Based Username Enumeration and Unthrottled Authentication Attempts
RansomLook contains multiple weaknesses in its authentication endpoint that allow an unauthenticated remote attacker to enumerate valid usernames, perform unrestricted password-guessing attacks, and potentially exhaust application worker resources.
For local authentication, the login implementation previously checked whether a submitted username existed before invoking the password hash verification function. Requests containing a nonexistent username therefore returned significantly faster than requests for valid accounts, for which the computationally expensive password verification routine was executed. A remote attacker could measure these response-time differences to determine which usernames correspond to valid RansomLook accounts.
In addition, the /login endpoint did not restrict the number or frequency of failed authentication attempts. An attacker could consequently perform password brute-force, dictionary, password-spraying, or credential-stuffing attacks against known accounts without server-side throttling. For valid usernames, each authentication attempt also invokes the password key-derivation function, which consumes a significant amount of CPU time. A sufficiently high rate of login attempts could therefore occupy the application's synchronous Gunicorn workers and cause a denial of service affecting the entire application.
The issue has been addressed by always performing password verification using a randomly generated dummy password hash when the supplied username does not exist, eliminating the username-dependent timing discrepancy. Failed authentication attempts are additionally rate-limited per client IP address using Valkey/Redis, with five failed attempts within five minutes resulting in a one-hour block. The reverse-proxy configuration was also updated so that the application derives the client address from a trusted X-Forwarded-For value that cannot be overridden by a client-supplied header.
- Record
CVE-2026-78551- CVSS 4.0
- 8.8 High
CVSS:4.0/AV:N/AC:L/AT:N/PR:N/UI:N/VC:L/VI:N/VA:H/SC:N/SI:N/SA:N - Weakness
- CWE-307, CWE-400
- Updated
- 2026-11-02
EUVDEUVD-2026-65085
8.8
RansomLook contains multiple weaknesses in its authentication endpoint that allow an unauthenticated remote attacker to enumerate valid usernames, perform unrestricted password-guessing attacks, and potentially exhaust application worker resources.
For local authentication, the login implementation previously checked whether a submitted username existed before invoking the password hash verification function. Requests containing a nonexistent username therefore returned significantly faster than requests for valid accounts, for which the computationally expensive password verification routine was executed. A remote attacker could measure these response-time differences to determine which usernames correspond to valid RansomLook accounts.
In addition, the /login endpoint did not restrict the number or frequency of failed authentication attempts. An attacker could consequently perform password brute-force, dictionary, password-spraying, or credential-stuffing attacks against known accounts without server-side throttling. For valid usernames, each authentication attempt also invokes the password key-derivation function, which consumes a significant amount of CPU time. A sufficiently high rate of login attempts could therefore occupy the application's synchronous Gunicorn workers and cause a denial of service affecting the entire application.
The issue has been addressed by always performing password verification using a randomly generated dummy password hash when the supplied username does not exist, eliminating the username-dependent timing discrepancy. Failed authentication attempts are additionally rate-limited per client IP address using Valkey/Redis, with five failed attempts within five minutes resulting in a one-hour block. The reverse-proxy configuration was also updated so that the application derives the client address from a trusted X-Forwarded-For value that cannot be overridden by a client-supplied header.
- Record
EUVD-2026-65085- CVSS 4.0
- 8.8 High
CVSS:4.0/AV:N/AC:L/AT:N/PR:N/UI:N/VC:L/VI:N/VA:H/SC:N/SI:N/SA:N - Updated
- 2026-11-02
GitHub AdvisoriesGHSA-vrw5-9j4x-chw5
8.8
RansomLook contains multiple weaknesses in its authentication endpoint that allow an...
RansomLook contains multiple weaknesses in its authentication endpoint that allow an unauthenticated remote attacker to enumerate valid usernames, perform unrestricted password-guessing attacks, and potentially exhaust application worker resources.
For local authentication, the login implementation previously checked whether a submitted username existed before invoking the password hash verification function. Requests containing a nonexistent username therefore returned significantly faster than requests for valid accounts, for which the computationally expensive password verification routine was executed. A remote attacker could measure these response-time differences to determine which usernames correspond to valid RansomLook accounts.
In addition, the /login endpoint did not restrict the number or frequency of failed authentication attempts. An attacker could consequently perform password brute-force, dictionary, password-spraying, or credential-stuffing attacks against known accounts without server-side throttling. For valid usernames, each authentication attempt also invokes the password key-derivation function, which consumes a significant amount of CPU time. A sufficiently high rate of login attempts could therefore occupy the application's synchronous Gunicorn workers and cause a denial of service affecting the entire application.
The issue has been addressed by always performing password verification using a randomly generated dummy password hash when the supplied username does not exist, eliminating the username-dependent timing discrepancy. Failed authentication attempts are additionally rate-limited per client IP address using Valkey/Redis, with five failed attempts within five minutes resulting in a one-hour block. The reverse-proxy configuration was also updated so that the application derives the client address from a trusted X-Forwarded-For value that cannot be overridden by a client-supplied header.
- Record
GHSA-vrw5-9j4x-chw5- CVSS 4.0
- 8.8 High
CVSS:4.0/AV:N/AC:L/AT:N/PR:N/UI:N/VC:L/VI:N/VA:H/SC:N/SI:N/SA:N/E:X/CR:X/IR:X/AR:X/MAV:X/MAC:X/MAT:X/MPR:X/MUI:X/MVC:X/MVI:X/MVA:X/MSC:X/MSI:X/MSA:X/S:X/AU:X/R:X/V:X/RE:X/U:X - Weakness
- CWE-307
- Updated
- 2026-11-02
NVD
8.8
RansomLook contains multiple weaknesses in its authentication endpoint that allow an unauthenticated remote attacker to enumerate valid usernames, perform unrestricted password-guessing attacks, and potentially exhaust application worker resources.
For local authentication, the login implementation previously checked whether a submitted username existed before invoking the password hash verification function. Requests containing a nonexistent username therefore returned significantly faster than requests for valid accounts, for which the computationally expensive password verification routine was executed. A remote attacker could measure these response-time differences to determine which usernames correspond to valid RansomLook accounts.
In addition, the /login endpoint did not restrict the number or frequency of failed authentication attempts. An attacker could consequently perform password brute-force, dictionary, password-spraying, or credential-stuffing attacks against known accounts without server-side throttling. For valid usernames, each authentication attempt also invokes the password key-derivation function, which consumes a significant amount of CPU time. A sufficiently high rate of login attempts could therefore occupy the application's synchronous Gunicorn workers and cause a denial of service affecting the entire application.
The issue has been addressed by always performing password verification using a randomly generated dummy password hash when the supplied username does not exist, eliminating the username-dependent timing discrepancy. Failed authentication attempts are additionally rate-limited per client IP address using Valkey/Redis, with five failed attempts within five minutes resulting in a one-hour block. The reverse-proxy configuration was also updated so that the application derives the client address from a trusted X-Forwarded-For value that cannot be overridden by a client-supplied header.
- Record
CVE-2026-78551- CVSS 4.0
- 8.8 High
CVSS:4.0/AV:N/AC:L/AT:N/PR:N/UI:N/VC:L/VI:N/VA:H/SC:N/SI:N/SA:N/E:X/CR:X/IR:X/AR:X/MAV:X/MAC:X/MAT:X/MPR:X/MUI:X/MVC:X/MVI:X/MVA:X/MSC:X/MSI:X/MSA:X/S:X/AU:X/R:X/V:X/RE:X/U:X - Weakness
- CWE-307, CWE-400
- Updated
- 2026-11-02
OSV
8.8
RansomLook Login Endpoint Allows Timing-Based Username Enumeration and Unthrottled Authentication Attempts
RansomLook contains multiple weaknesses in its authentication endpoint that allow an unauthenticated remote attacker to enumerate valid usernames, perform unrestricted password-guessing attacks, and potentially exhaust application worker resources.
For local authentication, the login implementation previously checked whether a submitted username existed before invoking the password hash verification function. Requests containing a nonexistent username therefore returned significantly faster than requests for valid accounts, for which the computationally expensive password verification routine was executed. A remote attacker could measure these response-time differences to determine which usernames correspond to valid RansomLook accounts.
In addition, the /login endpoint did not restrict the number or frequency of failed authentication attempts. An attacker could consequently perform password brute-force, dictionary, password-spraying, or credential-stuffing attacks against known accounts without server-side throttling. For valid usernames, each authentication attempt also invokes the password key-derivation function, which consumes a significant amount of CPU time. A sufficiently high rate of login attempts could therefore occupy the application's synchronous Gunicorn workers and cause a denial of service affecting the entire application.
The issue has been addressed by always performing password verification using a randomly generated dummy password hash when the supplied username does not exist, eliminating the username-dependent timing discrepancy. Failed authentication attempts are additionally rate-limited per client IP address using Valkey/Redis, with five failed attempts within five minutes resulting in a one-hour block. The reverse-proxy configuration was also updated so that the application derives the client address from a trusted X-Forwarded-For value that cannot be overridden by a client-supplied header.
- Record
CVE-2026-78551- CVSS 4.0
- 8.8 High
CVSS:4.0/AV:N/AC:L/AT:N/PR:N/UI:N/VC:L/VI:N/VA:H/SC:N/SI:N/SA:N - Weakness
- CWE-307, CWE-400
- Updated
- 2026-11-02
Affected products
History
| Recorded | Changed | Sources |
|---|---|---|
| aliases, published | EUVD | |
| first indexed | CVE List, GitHub Advisories, NVD, OSV |
Dates are when Every CVE recorded each change. Upstream dates may differ.
In short
CVE-2026-78551 is a high vulnerability (CVSS 8.8) in Ransomlook, published August 24, 2026. No source lists public exploit code. EPSS puts the chance of exploitation in the next 30 days at 0.65%, the 51st percentile. No source names a fixed version.