CVE-2026-89647

In the Linux kernel, the following vulnerability has been resolved: ceph: do not repeat ceph_trim_dentries() if no progress possible ceph_cap_reclaim_work() re-queues itself for as long as ceph_trim_dentries() returns -EAGAIN, which happens whenever a lease walk exhausts its nr_to_scan budget. This creates a busy loop that consumes CPU without making any progress when there is nothing to reclaim: with no cap pressure (count==0) and every scanned lease still valid, each pass runs the full scan budget down to zero and returns -EAGAIN, only to be queued again immediately. The dir-lease walk made this worse. When expire_dir_lease is false (i.e. we have no intention of reclaiming dir leases), __dir_lease_check() returned TOUCH for every valid lease. TOUCH moves the dentry to the tail of the list and resets di->time via __dentry_dir_lease_touch(), so a walk over N valid leases pointlessly rewrote the list, refreshed the timestamps (preventing them from ever aging out) and always drained nr_to_scan, guaranteeing the -EAGAIN requeue. Fix this in three steps: - Return KEEP instead of TOUCH when expire_dir_lease is false. If we are not going to reclaim the lease, leave it in place instead of churning the list and resetting its timestamp; the walk then terminates naturally (or via STOP at the first fresh lease). - Only return -EAGAIN from the first (dentry-lease) walk when something was actually freed. A full batch that frees nothing means retrying the same list immediately is futile; fall through to the dir-lease walk instead. - After both walks, bail out with success (0) when nothing was freed and there is no cap pressure (count==0). There is no reason to keep retrying when we are not over the cap limit and made no progress. Under real cap pressure (count>0) the reclaim path is unchanged and still retries via -EAGAIN. Without this patch, I saw 500 ceph_trim_dentries() calls per second on our web servers. This is very visible in /proc/lock_stat (5 minute capture): class name con-bounces contentions waittime-min waittime-max waittime-total waittime-avg acq-bounces acquisitions holdtime-min holdtime-max holdtime-total holdtime-avg &mdsc->dentry_list_lock: 126180 128218 0.04 8063.44 15986965.20 124.69 1573354 5296812 0.04 8291.28 74164526.48 14.00 ----------------------- &mdsc->dentry_list_lock 111736 [<000000007b11e319>] __ceph_dentry_dir_lease_touch+0x7c/0xa8 &mdsc->dentry_list_lock 2631 [<0000000050597999>] __dentry_leases_walk+0x64/0x2c8 &mdsc->dentry_list_lock 3878 [<00000000c0022f62>] __ceph_dentry_lease_touch+0x5c/0xa8 &mdsc->dentry_list_lock 9973 [<000000002f27cb6f>] __dentry_lease_unlist+0x50/0xa0 ----------------------- &mdsc->dentry_list_lock 123621 [<0000000050597999>] __dentry_leases_walk+0x64/0x2c8 &mdsc->dentry_list_lock 1822 [<000000007b11e319>] __ceph_dentry_dir_lease_touch+0x7c/0xa8 &mdsc->dentry_list_lock 2720 [<000000002f27cb6f>] __dentry_lease_unlist+0x50/0xa0 &mdsc->dentry_list_lock 55 [<00000000c0022f62>] __ceph_dentry_lease_touch+0x5c/0xa8 With this patch: class name con-bounces contentions waittime-min waittime-max waittime-total waittime-avg acq-bounces acquisitions holdtime-min holdtime-max holdtime-total holdtime-avg &mdsc->dentry_list_lock: 1203 1215 0.16 408.88 33082.88 27.23 4320501 7357389 0.04 500.64 1961578.00 0.27 ----------------------- &mdsc->dentry_list_lock 1029 [<000000003c9aea8a>] __ceph_dentry_dir_lease_touch+0x7c/0xa8 &mdsc->dentry_list_lock 1 ---truncated---

The Linux Kernel, the operating system core itself.

Security Fix(es):

In the Linux kernel, the following vulnerability has been resolved:

netfilter: ipset: fix race between dump and ip_set_list resize

The release path of ip_set_dump_do() and ip_set_dump_done() read inst->ip_set_list via ip_set_ref_netlink(), a plain rcu_dereference_raw() of the array pointer. These run from netlink_recvmsg() without the nfnl mutex and without an RCU read-side critical section.

A concurrent ip_set_create() can grow the array: it publishes the new array, calls synchronize_net() and then kvfree()s the old one. Since the dump paths read the array outside any RCU reader, synchronize_net() does not wait for them and the old array can be freed while they still index into it, causing a use-after-free.

The dumped set itself stays pinned via set->ref_netlink, so only the array load needs protecting. Take rcu_read_lock() around it, matching ip_set_get_byname() and __ip_set_put_byindex().

BUG: KASAN: slab-use-after-free in ip_set_dump_do (net/netfilter/ipset/ip_set_core.c:1697) Read of size 8 at addr ffff88800b5c4018 by task exploit/150 Call Trace: ... kasan_report (mm/kasan/report.c:595) ip_set_dump_do (net/netfilter/ipset/ip_set_core.c:1697) netlink_dump (net/netlink/af_netlink.c:2325) netlink_recvmsg (net/netlink/af_netlink.c:1976) sock_recvmsg (net/socket.c:1159) __sys_recvfrom (net/socket.c:2315) ... Oops: general protection fault, probably for non-canonical address ... KASAN NOPTI KASAN: maybe wild-memory-access in range [0x02d6...d0-0x02d6...d7] RIP: 0010:ip_set_dump_do (net/netfilter/ipset/ip_set_core.c:1698) Kernel panic - not syncing: Fatal exception(CVE-2026-64189)

In the Linux kernel, the following vulnerability has been resolved:

sctp: drop a chunk if its transport was removed

sctp_rcv() resolves the transport once per packet and leaves it in chunk->transport. The lookup reference, or the one sctp_add_backlog() takes if the socket is owned by userspace, keeps it around until the chunk has been processed.

An authenticated ASCONF DEL-IP can remove it in the meantime. sctp_assoc_rm_peer() takes the transport out of the association and calls sctp_transport_free(), which tags it dead and drops the reference the association held. There is a window on both paths: the packet can sit on the socket backlog, and on the direct path the lookup completes before bh_lock_sock().

The DATA chunk in that packet puts the removed transport back into asoc->peer.last_data_from. Once the packet is done that reference goes away and the transport is freed by RCU, so the next delayed SACK carries the pointer into the SACK chunk and sctp_outq_select_transport() reads the freed transport's state.

Drop the chunk in sctp_inq_push(), next to the existing rcvr->dead check. Both paths reach it with the association's socket lock held. The peer retransmits it.(CVE-2026-89478)

In the Linux kernel, the following vulnerability has been resolved:

sctp: stop processing a packet once its association is deleted

sctp_endpoint_bh_rcv() looks the association up only when chunk->asoc is NULL, and caches the result in chunk->asoc and chunk->transport without taking a reference.

A packet that matches no association is handed to the endpoint, so a peer can bundle COOKIE ECHO, SHUTDOWN and SHUTDOWN ACK in one packet. The COOKIE ECHO creates the association, the SHUTDOWN chunk caches it, and with the outqueue empty the SHUTDOWN ACK reaches sctp_sf_do_9_2_final(), so the association and its transports are freed.

The endpoint loop has no counterpart to the asoc->base.dead check in sctp_assoc_bh_rcv(). The next chunk writes to last_time_heard in the freed transport and is then passed to sctp_do_sm() with the freed association. The transport is freed through RCU, so this needs the packet to come off the socket backlog, where the loop runs in task context.

The endpoint loop cannot do the same check: it…

In the Linux kernel, the following vulnerability has been resolved: ceph: do not repeat ceph_trim_dentries() if no progress possible ceph_cap_reclaim_work() re-queues itself for as long as ceph_trim_dentries() returns -EAGAIN, which happens whenever a lease walk exhausts its nr_to_scan budget. This creates a busy loop that consumes CPU without making any progress when there is nothing to reclaim: with no cap pressure (count==0) and every scanned lease still valid, each pass runs the full scan budget down to zero and returns -EAGAIN, only to be queued again immediately. The dir-lease walk made this worse. When expire_dir_lease is false (i.e. we have no intention of reclaiming dir leases), __dir_lease_check() returned TOUCH for every valid lease. TOUCH moves the dentry to the tail of the list and resets di->time via __dentry_dir_lease_touch(), so a walk over N valid leases pointlessly rewrote the list, refreshed the timestamps (preventing them from ever aging out) and always drained nr_to_scan, guaranteeing the -EAGAIN requeue. Fix this in three steps: - Return KEEP instead of TOUCH when expire_dir_lease is false. If we are not going to reclaim the lease, leave it in place instead of churning the list and resetting its timestamp; the walk then terminates naturally (or via STOP at the first fresh lease). - Only return -EAGAIN from the first (dentry-lease) walk when something was actually freed. A full batch that frees nothing means retrying the same list immediately is futile; fall through to the dir-lease walk instead. - After both walks, bail out with success (0) when nothing was freed and there is no cap pressure (count==0). There is no reason to keep retrying when we are not over the cap limit and made no progress. Under real cap pressure (count>0) the reclaim path is unchanged and still retries via -EAGAIN. Without this patch, I saw 500 ceph_trim_dentries() calls per second on our web servers. This is very visible in /proc/lock_stat (5 minute capture): class name con-bounces contentions waittime-min waittime-max waittime-total waittime-avg acq-bounces acquisitions holdtime-min holdtime-max holdtime-total holdtime-avg &mdsc->dentry_list_lock: 126180 128218 0.04 8063.44 15986965.20 124.69 1573354 5296812 0.04 8291.28 74164526.48 14.00 ----------------------- &mdsc->dentry_list_lock 111736 [<000000007b11e319>] __ceph_dentry_dir_lease_touch+0x7c/0xa8 &mdsc->dentry_list_lock 2631 [<0000000050597999>] __dentry_leases_walk+0x64/0x2c8 &mdsc->dentry_list_lock 3878 [<00000000c0022f62>] __ceph_dentry_lease_touch+0x5c/0xa8 &mdsc->dentry_list_lock 9973 [<000000002f27cb6f>] __dentry_lease_unlist+0x50/0xa0 ----------------------- &mdsc->dentry_list_lock 123621 [<0000000050597999>] __dentry_leases_walk+0x64/0x2c8 &mdsc->dentry_list_lock 1822 [<000000007b11e319>] __ceph_dentry_dir_lease_touch+0x7c/0xa8 &mdsc->dentry_list_lock 2720 [<000000002f27cb6f>] __dentry_lease_unlist+0x50/0xa0 &mdsc->dentry_list_lock 55 [<00000000c0022f62>] __ceph_dentry_lease_touch+0x5c/0xa8 With this patch: class name con-bounces contentions waittime-min waittime-max waittime-total waittime-avg acq-bounces acquisitions holdtime-min holdtime-max holdtime-total holdtime-avg &mdsc->dentry_list_lock: 1203 1215 0.16 408.88 33082.88 27.23 4320501 7357389 0.04 500.64 1961578.00 0.27 ----------------------- &mdsc->dentry_list_lock 1029 [<000000003c9aea8a>] __ceph_dentry_dir_lease_touch+0x7c/0xa8 &mdsc->dentry_list_lock 1 ---truncated---

In the Linux kernel, the following vulnerability has been resolved:

ceph: do not repeat ceph_trim_dentries() if no progress possible

ceph_cap_reclaim_work() re-queues itself for as long as ceph_trim_dentries() returns -EAGAIN, which happens whenever a lease walk exhausts its nr_to_scan budget. This creates a busy loop that consumes CPU without making any progress when there is nothing to reclaim: with no cap pressure (count==0) and every scanned lease still valid, each pass runs the full scan budget down to zero and returns -EAGAIN, only to be queued again immediately.

The dir-lease walk made this worse. When expire_dir_lease is false (i.e. we have no intention of reclaiming dir leases), __dir_lease_check() returned TOUCH for every valid lease. TOUCH moves the dentry to the tail of the list and resets di->time via __dentry_dir_lease_touch(), so a walk over N valid leases pointlessly rewrote the list, refreshed the timestamps (preventing them from ever aging out) and always drained nr_to_scan, guaranteeing the -EAGAIN requeue.

Fix this in three steps:

• Return KEEP instead of TOUCH when expire_dir_lease is false. If we are not going to reclaim the lease, leave it in place instead of churning the list and resetting its timestamp; the walk then terminates naturally (or via STOP at the first fresh lease).

• Only return -EAGAIN from the first (dentry-lease) walk when something was actually freed. A full batch that frees nothing means retrying the same list immediately is futile; fall through to the dir-lease walk instead.

• After both walks, bail out with success (0) when nothing was freed and there is no cap pressure (count==0). There is no reason to keep retrying when we are not over the cap limit and made no progress.

Under real cap pressure (count>0) the reclaim path is unchanged and still retries via -EAGAIN.

Without this patch, I saw 500 ceph_trim_dentries() calls per second on our web servers. This is very visible in /proc/lock_stat (5 minute capture):

          class name    con-bounces    contentions   waittime-min   waittime-max waittime-total   waittime-avg    acq-bounces   acquisitions   holdtime-min   holdtime-max holdtime-total   holdtime-avg

&mdsc->dentry_list_lock: 126180 128218 0.04 8063.44 15986965.20 124.69 1573354 5296812 0.04 8291.28 74164526.48 14.00

&mdsc->dentry_list_lock 111736 [<000000007b11e319>] __ceph_dentry_dir_lease_touch+0x7c/0xa8 &mdsc->dentry_list_lock 2631 [<0000000050597999>] __dentry_leases_walk+0x64/0x2c8 &mdsc->dentry_list_lock 3878 [<00000000c0022f62>] __ceph_dentry_lease_touch+0x5c/0xa8 &mdsc->dentry_list_lock 9973 [<000000002f27cb6f>] __dentry_lease_unlist+0x50/0xa0

&mdsc->dentry_list_lock 123621 [<0000000050597999>] __dentry_leases_walk+0x64/0x2c8 &mdsc->dentry_list_lock 1822 [<000000007b11e319>] __ceph_dentry_dir_lease_touch+0x7c/0xa8 &mdsc->dentry_list_lock 2720 [<000000002f27cb6f>] __dentry_lease_unlist+0x50/0xa0 &mdsc->dentry_list_lock 55 [<00000000c0022f62>] __ceph_dentry_lease_touch+0x5c/0xa8

With this patch:

          class name    con-bounces    contentions   waittime-min   waittime-max waittime-total   waittime-avg    acq-bounces   acquisitions   holdtime-min   holdtime-max holdtime-total   holdtime-avg

&mdsc->dentry_list_lock: 1203 1215 0.16 408.88 33082.88 27.23 4320501 7357389 0.04 500.64 1961578.00 0.27

&mdsc->dentry_list_lock 1029 [<000000003c9aea8a>] __ceph_dentry_dir_lease_touch+0x7c/0xa8 &mdsc->dentry_list_lock 1 ---truncated---

Upstream kernel 6.18.55 version fixes bugs and vulnerabilities. The kmod-xtables-addons, kmod-virtualbox, kmod-nvidia-current-wopengpu & drakx-installer-images packages have been updated to work with this new kernel.

Vanilla upstream kernel version 6.18.55 fixes vulnerabilities. For information about the vulnerabilities see the links.

These are all security issues fixed in the kernel-devel-7.2.7-1.1 package on the GA media of openSUSE Tumbleweed.

Several security issues were discovered in the Linux kernel. An attacker could possibly use these to compromise the system. This update corrects flaws in the following subsystems:

• USB Gadget drivers;
• Memory management;
• Multiple devices driver;
• ARM64 architecture;
• EROFS file system;
• Networking core;
• eXpress Data Path;
• ARM32 architecture;
• M68K architecture;
• MIPS architecture;
• OpenRISC architecture;
• PA-RISC architecture;
• PowerPC architecture;
• RISC-V architecture;
• S390 architecture;
• User-Mode Linux (UML);
• x86 architecture;
• Block layer subsystem;
• Cryptographic API;
• Compute Acceleration Framework;
• Intel NPU Driver;
• Speakup Console Speech Driver;
• ACPI drivers;
• Serial ATA and Parallel ATA drivers;
• Auxiliary display drivers;
• Drivers core;
• Micron PCIe SSD driver;
• Null block device driver;
• Ublk userspace block driver;
• Compressed RAM block device driver;
• Bluetooth drivers;
• Bus devices;
• AMD CDX bus driver;
• Hardware random number generator core;
• Character device driver;
• TPM device driver;
• Clock framework and drivers;
• Clocksource drivers;
• CPU frequency scaling framework;
• CPU idle management framework;
• Hardware crypto device drivers;
• CXL (Compute Express Link) drivers;
• DAX dirext access to differentiated memory framework;
• DIBS (Direct Internal Buffer Sharing) drivers;
• Buffer Sharing and Synchronization framework;
• DMA engine subsystem;
• EDAC drivers;
• FireWire subsystem;
• ARM SCMI message protocol;
• ARM SCPI message protocol;
• Google firmware drivers;
• Qualcomm firmware drivers;
• FPGA Framework;
• GPIO subsystem;
• GPU drivers;
• HID subsystem;
• HSI subsystem;
• Microsoft Hyper-V drivers;
• Hardware monitoring drivers;
• CoreSight HW tracing drivers;
• I2C subsystem;
• I3C subsystem;
• IIO subsystem;
• InfiniBand drivers;
• Input Device core drivers;
• Input Device (Miscellaneous) drivers;
• Input Device (Mouse) drivers;
• On-Chip Interconnect management framework;
• IOMMU subsystem;
• Industry Pack bus drivers;
• IRQ chip drivers;
• Mailbox framework;
• Media drivers;
• MemoryStick subsystem;
• Multifunction device drivers;
• Analog Devices digital potentiometer driver;
• Broadcom VK accelerator driver;
• Fastrpc Driver;
• Amazon Nitro Secure Module driver;
• SGI GRU driver;
• MMC subsystem;
• MTD block device drivers;
• Network drivers;
• Ethernet bonding driver;
• Mellanox network drivers;
• Microsoft Azure Network Adapter (MANA) driver;
• STMicroelectronics network drivers;
• Texas Instruments network drivers;
• MediaTek network drivers;
• Near Field Communication (NFC) drivers;
• NTB driver;
• NVDIMM (Non-Volatile Memory Device) drivers;
• NVME drivers;
• Device tree and open firmware driver;
• Operating Performance Points (OPP) driver;
• PA-RISC drivers;
• PCI subsystem;
• Performance monitor drivers;
• PHY drivers;
• Pin controllers subsystem;
• Chrome hardware platform drivers;
• Mellanox platform drivers;
• Microsoft Surface platform drivers;
• x86 platform drivers;
• MediaTek PM domains;
• Power sequencing drivers;
• Power supply drivers;
• Powercap sysfs driver;
• PTP clock framework;
• PWM drivers;
• RapidIO drivers;
• Voltage and Current Regulator drivers;
• Remote Processor subsystem;
• MPAM driver;
• RPMSG subsystem;
• Real Time Clock drivers;
• S/390 drivers;
• SCSI subsystem;
• ASPEED SoC drivers;
• Samsung SoC drivers;
• SPI subsystem;
• small TFT LCD display modules;
• Greybus lights staging drivers;
• Media staging drivers;
• Realtek RTL8723BS SDIO drivers;
• TCM subsystem;
• Trusted Execution Environment drivers;
• Thermal drivers;
• Thunderbolt and USB4 drivers;
• TTY drivers;
• UFS subsystem;
• Userspace I/O drivers;
• USB DSL drivers;
• Cypress C67X00 USB…

Several security issues were discovered in the Linux kernel. An attacker could possibly use these to compromise the system. This update corrects flaws in the following subsystems:

• USB Gadget drivers;
• Memory management;
• Multiple devices driver;
• ARM64 architecture;
• EROFS file system;
• Networking core;
• eXpress Data Path;
• ARM32 architecture;
• M68K architecture;
• MIPS architecture;
• OpenRISC architecture;
• PA-RISC architecture;
• PowerPC architecture;
• RISC-V architecture;
• S390 architecture;
• User-Mode Linux (UML);
• x86 architecture;
• Block layer subsystem;
• Cryptographic API;
• Compute Acceleration Framework;
• Intel NPU Driver;
• Speakup Console Speech Driver;
• ACPI drivers;
• Serial ATA and Parallel ATA drivers;
• Auxiliary display drivers;
• Drivers core;
• Micron PCIe SSD driver;
• Null block device driver;
• Ublk userspace block driver;
• Compressed RAM block device driver;
• Bluetooth drivers;
• Bus devices;
• AMD CDX bus driver;
• Hardware random number generator core;
• Character device driver;
• TPM device driver;
• Clock framework and drivers;
• Clocksource drivers;
• CPU frequency scaling framework;
• CPU idle management framework;
• Hardware crypto device drivers;
• CXL (Compute Express Link) drivers;
• DAX dirext access to differentiated memory framework;
• DIBS (Direct Internal Buffer Sharing) drivers;
• Buffer Sharing and Synchronization framework;
• DMA engine subsystem;
• EDAC drivers;
• FireWire subsystem;
• ARM SCMI message protocol;
• ARM SCPI message protocol;
• Google firmware drivers;
• Qualcomm firmware drivers;
• FPGA Framework;
• GPIO subsystem;
• GPU drivers;
• HID subsystem;
• HSI subsystem;
• Microsoft Hyper-V drivers;
• Hardware monitoring drivers;
• CoreSight HW tracing drivers;
• I2C subsystem;
• I3C subsystem;
• IIO subsystem;
• InfiniBand drivers;
• Input Device core drivers;
• Input Device (Miscellaneous) drivers;
• Input Device (Mouse) drivers;
• On-Chip Interconnect management framework;
• IOMMU subsystem;
• Industry Pack bus drivers;
• IRQ chip drivers;
• Mailbox framework;
• Media drivers;
• MemoryStick subsystem;
• Multifunction device drivers;
• Analog Devices digital potentiometer driver;
• Broadcom VK accelerator driver;
• Fastrpc Driver;
• Amazon Nitro Secure Module driver;
• SGI GRU driver;
• MMC subsystem;
• MTD block device drivers;
• Network drivers;
• Ethernet bonding driver;
• Mellanox network drivers;
• Microsoft Azure Network Adapter (MANA) driver;
• STMicroelectronics network drivers;
• Texas Instruments network drivers;
• MediaTek network drivers;
• Near Field Communication (NFC) drivers;
• NTB driver;
• NVDIMM (Non-Volatile Memory Device) drivers;
• NVME drivers;
• Device tree and open firmware driver;
• Operating Performance Points (OPP) driver;
• PA-RISC drivers;
• PCI subsystem;
• Performance monitor drivers;
• PHY drivers;
• Pin controllers subsystem;
• Chrome hardware platform drivers;
• Mellanox platform drivers;
• Microsoft Surface platform drivers;
• x86 platform drivers;
• MediaTek PM domains;
• Power sequencing drivers;
• Power supply drivers;
• Powercap sysfs driver;
• PTP clock framework;
• PWM drivers;
• RapidIO drivers;
• Voltage and Current Regulator drivers;
• Remote Processor subsystem;
• MPAM driver;
• RPMSG subsystem;
• Real Time Clock drivers;
• S/390 drivers;
• SCSI subsystem;
• ASPEED SoC drivers;
• Samsung SoC drivers;
• SPI subsystem;
• small TFT LCD display modules;
• Greybus lights staging drivers;
• Media staging drivers;
• Realtek RTL8723BS SDIO drivers;
• TCM subsystem;
• Trusted Execution Environment drivers;
• Thermal drivers;
• Thunderbolt and USB4 drivers;
• TTY drivers;
• UFS subsystem;
• Userspace I/O drivers;
• USB DSL drivers;
• Cypress C67X00 USB…

It was discovered that the io_uring subsystem in the Linux kernel did not properly handle canceled task work when processing certain wait operations, leading to the operation being performed in the wrong task context. A local attacker could possibly use this to cause a denial of service (system crash). (CVE-2026-81010)

Several security issues were discovered in the Linux kernel. An attacker could possibly use these to compromise the system. This update corrects flaws in the following subsystems:

• ARM32 architecture;
• ARM64 architecture;
• MIPS architecture;
• OpenRISC architecture;
• PowerPC architecture;
• RISC-V architecture;
• S390 architecture;
• x86 architecture;
• Intel NPU Driver;
• ACPI drivers;
• Serial ATA and Parallel ATA drivers;
• Auxiliary display drivers;
• Ublk userspace block driver;
• Bluetooth drivers;
• Character device driver;
• CPU idle management framework;
• Hardware crypto device drivers;
• CXL (Compute Express Link) drivers;
• ARM SCMI message protocol;
• GPIO subsystem;
• GPU drivers;
• HID subsystem;
• HSI subsystem;
• Hardware monitoring drivers;
• I2C subsystem;
• I3C subsystem;
• IIO subsystem;
• InfiniBand drivers;
• Input Device core drivers;
• On-Chip Interconnect management framework;
• IOMMU subsystem;
• Multiple devices driver;
• Media drivers;
• Fastrpc Driver;
• Amazon Nitro Secure Module driver;
• MMC subsystem;
• MTD block device drivers;
• Ethernet bonding driver;
• Network drivers;
• Microsoft Azure Network Adapter (MANA) driver;
• Texas Instruments network drivers;
• MediaTek network drivers;
• NTB driver;
• NVDIMM (Non-Volatile Memory Device) drivers;
• NVME drivers;
• NVMEM (Non Volatile Memory) drivers;
• PCI subsystem;
• Chrome hardware platform drivers;
• x86 platform drivers;
• Power supply drivers;
• RapidIO drivers;
• Voltage and Current Regulator drivers;
• S/390 drivers;
• SCSI subsystem;
• SLIMbus drivers;
• NVIDIA Tegra SoC drivers;
• Realtek RTL8723BS SDIO drivers;
• TCM subsystem;
• Trusted Execution Environment drivers;
• Thunderbolt and USB4 drivers;
• TTY drivers;
• USB Device Class drivers;
• Faraday FOTG210 USB2 dual-role controller driver;
• USB Gadget drivers;
• USB Host Controller drivers;
• Siemens ID Mouse USB driver;
• IOWarrior USB driver;
• LD Didactic USB driver;
• LEGO USB Tower driver;
• USB Serial drivers;
• USB Type-C support driver;
• USB Type-C Port Controller Manager driver;
• USB Type-C Connector System Software Interface driver;
• USB over IP driver;
• VFIO drivers;
• Framebuffer layer;
• W1 Dallas's 1-wire bus driver;
• AFS file system;
• BTRFS file system;
• Ceph distributed file system;
• eCrypt file system;
• File systems infrastructure;
• Ext4 file system;
• F2FS file system;
• FUSE (File system in Userspace);
• Network file system (NFS) server daemon;
• NILFS2 file system;
• NTFS3 file system;
• OCFS2 file system;
• OrangeFS file system;
• SMB network file system;
• UBI file system;
• Drivers core;
• Tracing infrastructure;
• KProbes tracing;
• Networking core;
• Netfilter;
• Sun RPC protocol;
• IPv6 networking;
• Bluetooth subsystem;
• IPv4 networking;
• IP tunnels definitions;
• SCTP protocol;
• User-space API (UAPI);
• IPC subsystem;
• Audit subsystem;
• BPF subsystem;
• DMA mapping infrastructure;
• Kernel futex primitives;
• Scheduler infrastructure;
• Signal handling mechanism;
• Memory management;
• 6LoWPAN network protocol;
• IEEE 802 network protocols;
• B.A.T.M.A.N. meshing protocol;
• Ethernet bridge;
• CAN network layer;
• Ceph Core library;
• Devlink API;
• HSR network protocol;
• IEEE802154.4 network protocol;
• IUCV driver;
• MAC80211 subsystem;
• Management Component Transport Protocol (MCTP);
• MultiProtocol Label Switching driver;
• Multipath TCP;
• NetLabel subsystem; …