CVE-2026-98595

In the Linux kernel, the following vulnerability has been resolved: udp: remove a disconnected socket from the 4-tuple hash table A UDP socket bound to a specific address and port keeps its entry in the 4-tuple hash table after it is disconnected: sk binds to 127.0.0.1:21001 sk connects to 127.0.0.2:20001 // filed in the 4-tuple table sk disconnects, connect(AF_UNSPEC) // still filed, peer now 0.0.0.0:0 __udp_disconnect() takes a socket out of that table only as a side effect of ->rehash() or ->unhash(), and it skips ->rehash() when SOCK_BINDADDR_LOCK is set and ->unhash() when SOCK_BINDPORT_LOCK is set. commit 6996a2d2d0a6 ("udp: Unhash auto-bound connected sk from 4-tuple hash table when disconnected.") fixed the same end state for a wildcard-bound socket, by a path this one does not take. The entry is counted whether or not anything hits it. hash4_cnt on the hash2 slot stays raised for as long as the socket lives, so udp_has_hash4() keeps sending every packet for that address and port through the 4-tuple lookup first. On IPv6 it can also be hit. __udp_disconnect() does not clear sk_v6_daddr, so udp_v6_rehash() files the entry under the peer the socket was connected to with a zero dport, and inet6_match() compares that same field: a datagram from the former peer with a zero source port matches, and source port zero is accepted on receive. On IPv4 the peer is cleared, so a match would need a zero source address as well, which the routing layer rejects as martian. The stale sk_v6_daddr is a separate defect, not addressed here; removing the entry closes this path either way. The entry can also be relocated. __udp_disconnect() clears sk_bound_dev_if, so a subsequent SO_BINDTODEVICE calls ->rehash(), and because the receive address is still specific udp_lib_rehash() moves the entry instead of removing it, into the bucket that (rcv_saddr, num, 0, 0) hashes to -- a pure function of the address and port, so every socket reaching this state on one address and port collects in one bucket. The bucket cannot be chosen from outside, as udp_ehashfn() is seeded with a per-boot secret. This last one became reachable only with commit 644f9108f3a5 ("udp: Make rehash4 independent in udp_lib_rehash()"), which moved the hash4 handling out of a branch a disconnected socket does not take; the stale entry itself dates from the commit in Fixes. Take the socket out of the table before __udp_disconnect() runs, while it still matches how it was filed. This also reaches the wildcard case ahead of udp_lib_rehash()'s udp_unhash4() branch, leaving that branch unreachable from udp_disconnect(); removing it belongs in net-next. udp_disconnect() and udp_abort() are the only UDP entries into __udp_disconnect(), which is shared with raw, ping and l2tp sockets that are not struct udp_sock: ping_prot.obj_size is sizeof(struct inet_sock), so udp_hashed4() on one would read past the allocation.

In the Linux kernel, the following vulnerability has been resolved:

udp: remove a disconnected socket from the 4-tuple hash table

A UDP socket bound to a specific address and port keeps its entry in the 4-tuple hash table after it is disconnected:

sk binds to 127.0.0.1:21001
sk connects to 127.0.0.2:20001	// filed in the 4-tuple table
sk disconnects, connect(AF_UNSPEC)	// still filed, peer now 0.0.0.0:0

__udp_disconnect() takes a socket out of that table only as a side effect of ->rehash() or ->unhash(), and it skips ->rehash() when SOCK_BINDADDR_LOCK is set and ->unhash() when SOCK_BINDPORT_LOCK is set. commit 6996a2d2d0a6 ("udp: Unhash auto-bound connected sk from 4-tuple hash table when disconnected.") fixed the same end state for a wildcard-bound socket, by a path this one does not take.

The entry is counted whether or not anything hits it. hash4_cnt on the hash2 slot stays raised for as long as the socket lives, so udp_has_hash4() keeps sending every packet for that address and port through the 4-tuple lookup first.

On IPv6 it can also be hit. __udp_disconnect() does not clear sk_v6_daddr, so udp_v6_rehash() files the entry under the peer the socket was connected to with a zero dport, and inet6_match() compares that same field: a datagram from the former peer with a zero source port matches, and source port zero is accepted on receive. On IPv4 the peer is cleared, so a match would need a zero source address as well, which the routing layer rejects as martian. The stale sk_v6_daddr is a separate defect, not addressed here; removing the entry closes this path either way.

The entry can also be relocated. __udp_disconnect() clears sk_bound_dev_if, so a subsequent SO_BINDTODEVICE calls ->rehash(), and because the receive address is still specific udp_lib_rehash() moves the entry instead of removing it, into the bucket that (rcv_saddr, num, 0, 0) hashes to -- a pure function of the address and port, so every socket reaching this state on one address and port collects in one bucket. The bucket cannot be chosen from outside, as udp_ehashfn() is seeded with a per-boot secret. This last one became reachable only with commit 644f9108f3a5 ("udp: Make rehash4 independent in udp_lib_rehash()"), which moved the hash4 handling out of a branch a disconnected socket does not take; the stale entry itself dates from the commit in Fixes.

Take the socket out of the table before __udp_disconnect() runs, while it still matches how it was filed. This also reaches the wildcard case ahead of udp_lib_rehash()'s udp_unhash4() branch, leaving that branch unreachable from udp_disconnect(); removing it belongs in net-next. udp_disconnect() and udp_abort() are the only UDP entries into __udp_disconnect(), which is shared with raw, ping and l2tp sockets that are not struct udp_sock: ping_prot.obj_size is sizeof(struct inet_sock), so udp_hashed4() on one would read past the allocation.

In the Linux kernel, the following vulnerability has been resolved:

udp: remove a disconnected socket from the 4-tuple hash table

A UDP socket bound to a specific address and port keeps its entry in the 4-tuple hash table after it is disconnected:

sk binds to 127.0.0.1:21001
sk connects to 127.0.0.2:20001	// filed in the 4-tuple table
sk disconnects, connect(AF_UNSPEC)	// still filed, peer now 0.0.0.0:0

__udp_disconnect() takes a socket out of that table only as a side effect of ->rehash() or ->unhash(), and it skips ->rehash() when SOCK_BINDADDR_LOCK is set and ->unhash() when SOCK_BINDPORT_LOCK is set. commit 6996a2d2d0a6 ("udp: Unhash auto-bound connected sk from 4-tuple hash table when disconnected.") fixed the same end state for a wildcard-bound socket, by a path this one does not take.

The entry is counted whether or not anything hits it. hash4_cnt on the hash2 slot stays raised for as long as the socket lives, so udp_has_hash4() keeps sending every packet for that address and port through the 4-tuple lookup first.

On IPv6 it can also be hit. __udp_disconnect() does not clear sk_v6_daddr, so udp_v6_rehash() files the entry under the peer the socket was connected to with a zero dport, and inet6_match() compares that same field: a datagram from the former peer with a zero source port matches, and source port zero is accepted on receive. On IPv4 the peer is cleared, so a match would need a zero source address as well, which the routing layer rejects as martian. The stale sk_v6_daddr is a separate defect, not addressed here; removing the entry closes this path either way.

The entry can also be relocated. __udp_disconnect() clears sk_bound_dev_if, so a subsequent SO_BINDTODEVICE calls ->rehash(), and because the receive address is still specific udp_lib_rehash() moves the entry instead of removing it, into the bucket that (rcv_saddr, num, 0, 0) hashes to -- a pure function of the address and port, so every socket reaching this state on one address and port collects in one bucket. The bucket cannot be chosen from outside, as udp_ehashfn() is seeded with a per-boot secret. This last one became reachable only with commit 644f9108f3a5 ("udp: Make rehash4 independent in udp_lib_rehash()"), which moved the hash4 handling out of a branch a disconnected socket does not take; the stale entry itself dates from the commit in Fixes.

Take the socket out of the table before __udp_disconnect() runs, while it still matches how it was filed. This also reaches the wildcard case ahead of udp_lib_rehash()'s udp_unhash4() branch, leaving that branch unreachable from udp_disconnect(); removing it belongs in net-next. udp_disconnect() and udp_abort() are the only UDP entries into __udp_disconnect(), which is shared with raw, ping and l2tp sockets that are not struct udp_sock: ping_prot.obj_size is sizeof(struct inet_sock), so udp_hashed4() on one would read past the allocation.

In the Linux kernel, the following vulnerability has been resolved:

udp: remove a disconnected socket from the 4-tuple hash table

A UDP socket bound to a specific address and port keeps its entry in the 4-tuple hash table after it is disconnected:

sk binds to 127.0.0.1:21001
sk connects to 127.0.0.2:20001	// filed in the 4-tuple table
sk disconnects, connect(AF_UNSPEC)	// still filed, peer now 0.0.0.0:0

__udp_disconnect() takes a socket out of that table only as a side effect of ->rehash() or ->unhash(), and it skips ->rehash() when SOCK_BINDADDR_LOCK is set and ->unhash() when SOCK_BINDPORT_LOCK is set. commit 6996a2d2d0a6 ("udp: Unhash auto-bound connected sk from 4-tuple hash table when disconnected.") fixed the same end state for a wildcard-bound socket, by a path this one does not take.

The entry is counted whether or not anything hits it. hash4_cnt on the hash2 slot stays raised for as long as the socket lives, so udp_has_hash4() keeps sending every packet for that address and port through the 4-tuple lookup first.

On IPv6 it can also be hit. __udp_disconnect() does not clear sk_v6_daddr, so udp_v6_rehash() files the entry under the peer the socket was connected to with a zero dport, and inet6_match() compares that same field: a datagram from the former peer with a zero source port matches, and source port zero is accepted on receive. On IPv4 the peer is cleared, so a match would need a zero source address as well, which the routing layer rejects as martian. The stale sk_v6_daddr is a separate defect, not addressed here; removing the entry closes this path either way.

The entry can also be relocated. __udp_disconnect() clears sk_bound_dev_if, so a subsequent SO_BINDTODEVICE calls ->rehash(), and because the receive address is still specific udp_lib_rehash() moves the entry instead of removing it, into the bucket that (rcv_saddr, num, 0, 0) hashes to -- a pure function of the address and port, so every socket reaching this state on one address and port collects in one bucket. The bucket cannot be chosen from outside, as udp_ehashfn() is seeded with a per-boot secret. This last one became reachable only with commit 644f9108f3a5 ("udp: Make rehash4 independent in udp_lib_rehash()"), which moved the hash4 handling out of a branch a disconnected socket does not take; the stale entry itself dates from the commit in Fixes.

Take the socket out of the table before __udp_disconnect() runs, while it still matches how it was filed. This also reaches the wildcard case ahead of udp_lib_rehash()'s udp_unhash4() branch, leaving that branch unreachable from udp_disconnect(); removing it belongs in net-next. udp_disconnect() and udp_abort() are the only UDP entries into __udp_disconnect(), which is shared with raw, ping and l2tp sockets that are not struct udp_sock: ping_prot.obj_size is sizeof(struct inet_sock), so udp_hashed4() on one would read past the allocation.

In the Linux kernel, the following vulnerability has been resolved:

udp: remove a disconnected socket from the 4-tuple hash table

A UDP socket bound to a specific address and port keeps its entry in the 4-tuple hash table after it is disconnected:

sk binds to 127.0.0.1:21001
sk connects to 127.0.0.2:20001	// filed in the 4-tuple table
sk disconnects, connect(AF_UNSPEC)	// still filed, peer now 0.0.0.0:0

__udp_disconnect() takes a socket out of that table only as a side effect of ->rehash() or ->unhash(), and it skips ->rehash() when SOCK_BINDADDR_LOCK is set and ->unhash() when SOCK_BINDPORT_LOCK is set. commit 6996a2d2d0a6 ("udp: Unhash auto-bound connected sk from 4-tuple hash table when disconnected.") fixed the same end state for a wildcard-bound socket, by a path this one does not take.

The entry is counted whether or not anything hits it. hash4_cnt on the hash2 slot stays raised for as long as the socket lives, so udp_has_hash4() keeps sending every packet for that address and port through the 4-tuple lookup first.

On IPv6 it can also be hit. __udp_disconnect() does not clear sk_v6_daddr, so udp_v6_rehash() files the entry under the peer the socket was connected to with a zero dport, and inet6_match() compares that same field: a datagram from the former peer with a zero source port matches, and source port zero is accepted on receive. On IPv4 the peer is cleared, so a match would need a zero source address as well, which the routing layer rejects as martian. The stale sk_v6_daddr is a separate defect, not addressed here; removing the entry closes this path either way.

The entry can also be relocated. __udp_disconnect() clears sk_bound_dev_if, so a subsequent SO_BINDTODEVICE calls ->rehash(), and because the receive address is still specific udp_lib_rehash() moves the entry instead of removing it, into the bucket that (rcv_saddr, num, 0, 0) hashes to -- a pure function of the address and port, so every socket reaching this state on one address and port collects in one bucket. The bucket cannot be chosen from outside, as udp_ehashfn() is seeded with a per-boot secret. This last one became reachable only with commit 644f9108f3a5 ("udp: Make rehash4 independent in udp_lib_rehash()"), which moved the hash4 handling out of a branch a disconnected socket does not take; the stale entry itself dates from the commit in Fixes.

Take the socket out of the table before __udp_disconnect() runs, while it still matches how it was filed. This also reaches the wildcard case ahead of udp_lib_rehash()'s udp_unhash4() branch, leaving that branch unreachable from udp_disconnect(); removing it belongs in net-next. udp_disconnect() and udp_abort() are the only UDP entries into __udp_disconnect(), which is shared with raw, ping and l2tp sockets that are not struct udp_sock: ping_prot.obj_size is sizeof(struct inet_sock), so udp_hashed4() on one would read past the allocation.

In the Linux kernel, the following vulnerability has been resolved:

udp: remove a disconnected socket from the 4-tuple hash table

A UDP socket bound to a specific address and port keeps its entry in the 4-tuple hash table after it is disconnected:

sk binds to 127.0.0.1:21001
sk connects to 127.0.0.2:20001	// filed in the 4-tuple table
sk disconnects, connect(AF_UNSPEC)	// still filed, peer now 0.0.0.0:0

__udp_disconnect() takes a socket out of that table only as a side effect of ->rehash() or ->unhash(), and it skips ->rehash() when SOCK_BINDADDR_LOCK is set and ->unhash() when SOCK_BINDPORT_LOCK is set. commit 6996a2d2d0a6 ("udp: Unhash auto-bound connected sk from 4-tuple hash table when disconnected.") fixed the same end state for a wildcard-bound socket, by a path this one does not take.

The entry is counted whether or not anything hits it. hash4_cnt on the hash2 slot stays raised for as long as the socket lives, so udp_has_hash4() keeps sending every packet for that address and port through the 4-tuple lookup first.

On IPv6 it can also be hit. __udp_disconnect() does not clear sk_v6_daddr, so udp_v6_rehash() files the entry under the peer the socket was connected to with a zero dport, and inet6_match() compares that same field: a datagram from the former peer with a zero source port matches, and source port zero is accepted on receive. On IPv4 the peer is cleared, so a match would need a zero source address as well, which the routing layer rejects as martian. The stale sk_v6_daddr is a separate defect, not addressed here; removing the entry closes this path either way.

The entry can also be relocated. __udp_disconnect() clears sk_bound_dev_if, so a subsequent SO_BINDTODEVICE calls ->rehash(), and because the receive address is still specific udp_lib_rehash() moves the entry instead of removing it, into the bucket that (rcv_saddr, num, 0, 0) hashes to -- a pure function of the address and port, so every socket reaching this state on one address and port collects in one bucket. The bucket cannot be chosen from outside, as udp_ehashfn() is seeded with a per-boot secret. This last one became reachable only with commit 644f9108f3a5 ("udp: Make rehash4 independent in udp_lib_rehash()"), which moved the hash4 handling out of a branch a disconnected socket does not take; the stale entry itself dates from the commit in Fixes.

Take the socket out of the table before __udp_disconnect() runs, while it still matches how it was filed. This also reaches the wildcard case ahead of udp_lib_rehash()'s udp_unhash4() branch, leaving that branch unreachable from udp_disconnect(); removing it belongs in net-next. udp_disconnect() and udp_abort() are the only UDP entries into __udp_disconnect(), which is shared with raw, ping and l2tp sockets that are not struct udp_sock: ping_prot.obj_size is sizeof(struct inet_sock), so udp_hashed4() on one would read past the allocation.

In the Linux kernel, the following vulnerability has been resolved: udp: remove a disconnected socket from the 4-tuple hash table A UDP socket bound to a specific address and port keeps its entry in the 4-tuple hash table after it is disconnected: sk binds to 127.0.0.1:21001 sk connects to 127.0.0.2:20001 // filed in the 4-tuple table sk disconnects, connect(AF_UNSPEC) // still filed, peer now 0.0.0.0:0 __udp_disconnect() takes a socket out of that table only as a side effect of ->rehash() or ->unhash(), and it skips ->rehash() when SOCK_BINDADDR_LOCK is set and ->unhash() when SOCK_BINDPORT_LOCK is set. commit 6996a2d2d0a6 ("udp: Unhash auto-bound connected sk from 4-tuple hash table when disconnected.") fixed the same end state for a wildcard-bound socket, by a path this one does not take. The entry is counted whether or not anything hits it. hash4_cnt on the hash2 slot stays raised for as long as the socket lives, so udp_has_hash4() keeps sending every packet for that address and port through the 4-tuple lookup first. On IPv6 it can also be hit. __udp_disconnect() does not clear sk_v6_daddr, so udp_v6_rehash() files the entry under the peer the socket was connected to with a zero dport, and inet6_match() compares that same field: a datagram from the former peer with a zero source port matches, and source port zero is accepted on receive. On IPv4 the peer is cleared, so a match would need a zero source address as well, which the routing layer rejects as martian. The stale sk_v6_daddr is a separate defect, not addressed here; removing the entry closes this path either way. The entry can also be relocated. __udp_disconnect() clears sk_bound_dev_if, so a subsequent SO_BINDTODEVICE calls ->rehash(), and because the receive address is still specific udp_lib_rehash() moves the entry instead of removing it, into the bucket that (rcv_saddr, num, 0, 0) hashes to -- a pure function of the address and port, so every socket reaching this state on one address and port collects in one bucket. The bucket cannot be chosen from outside, as udp_ehashfn() is seeded with a per-boot secret. This last one became reachable only with commit 644f9108f3a5 ("udp: Make rehash4 independent in udp_lib_rehash()"), which moved the hash4 handling out of a branch a disconnected socket does not take; the stale entry itself dates from the commit in Fixes. Take the socket out of the table before __udp_disconnect() runs, while it still matches how it was filed. This also reaches the wildcard case ahead of udp_lib_rehash()'s udp_unhash4() branch, leaving that branch unreachable from udp_disconnect(); removing it belongs in net-next. udp_disconnect() and udp_abort() are the only UDP entries into __udp_disconnect(), which is shared with raw, ping and l2tp sockets that are not struct udp_sock: ping_prot.obj_size is sizeof(struct inet_sock), so udp_hashed4() on one would read past the allocation.

Several security issues were discovered in the Linux kernel. An attacker could possibly use these to compromise the system. This update corrects flaws in the following subsystems:

• USB Gadget drivers;
• Memory management;
• Multiple devices driver;
• ARM64 architecture;
• EROFS file system;
• Networking core;
• eXpress Data Path;
• ARM32 architecture;
• M68K architecture;
• MIPS architecture;
• OpenRISC architecture;
• PA-RISC architecture;
• PowerPC architecture;
• RISC-V architecture;
• S390 architecture;
• User-Mode Linux (UML);
• x86 architecture;
• Block layer subsystem;
• Cryptographic API;
• Compute Acceleration Framework;
• Intel NPU Driver;
• Speakup Console Speech Driver;
• ACPI drivers;
• Serial ATA and Parallel ATA drivers;
• Auxiliary display drivers;
• Drivers core;
• Micron PCIe SSD driver;
• Null block device driver;
• Ublk userspace block driver;
• Compressed RAM block device driver;
• Bluetooth drivers;
• Bus devices;
• AMD CDX bus driver;
• Hardware random number generator core;
• Character device driver;
• TPM device driver;
• Clock framework and drivers;
• Clocksource drivers;
• CPU frequency scaling framework;
• CPU idle management framework;
• Hardware crypto device drivers;
• CXL (Compute Express Link) drivers;
• DAX dirext access to differentiated memory framework;
• DIBS (Direct Internal Buffer Sharing) drivers;
• Buffer Sharing and Synchronization framework;
• DMA engine subsystem;
• EDAC drivers;
• FireWire subsystem;
• ARM SCMI message protocol;
• ARM SCPI message protocol;
• Google firmware drivers;
• Qualcomm firmware drivers;
• FPGA Framework;
• GPIO subsystem;
• GPU drivers;
• HID subsystem;
• HSI subsystem;
• Microsoft Hyper-V drivers;
• Hardware monitoring drivers;
• CoreSight HW tracing drivers;
• I2C subsystem;
• I3C subsystem;
• IIO subsystem;
• InfiniBand drivers;
• Input Device core drivers;
• Input Device (Miscellaneous) drivers;
• Input Device (Mouse) drivers;
• On-Chip Interconnect management framework;
• IOMMU subsystem;
• Industry Pack bus drivers;
• IRQ chip drivers;
• Mailbox framework;
• Media drivers;
• MemoryStick subsystem;
• Multifunction device drivers;
• Analog Devices digital potentiometer driver;
• Broadcom VK accelerator driver;
• Fastrpc Driver;
• Amazon Nitro Secure Module driver;
• SGI GRU driver;
• MMC subsystem;
• MTD block device drivers;
• Network drivers;
• Ethernet bonding driver;
• Mellanox network drivers;
• Microsoft Azure Network Adapter (MANA) driver;
• STMicroelectronics network drivers;
• Texas Instruments network drivers;
• MediaTek network drivers;
• Near Field Communication (NFC) drivers;
• NTB driver;
• NVDIMM (Non-Volatile Memory Device) drivers;
• NVME drivers;
• Device tree and open firmware driver;
• Operating Performance Points (OPP) driver;
• PA-RISC drivers;
• PCI subsystem;
• Performance monitor drivers;
• PHY drivers;
• Pin controllers subsystem;
• Chrome hardware platform drivers;
• Mellanox platform drivers;
• Microsoft Surface platform drivers;
• x86 platform drivers;
• MediaTek PM domains;
• Power sequencing drivers;
• Power supply drivers;
• Powercap sysfs driver;
• PTP clock framework;
• PWM drivers;
• RapidIO drivers;
• Voltage and Current Regulator drivers;
• Remote Processor subsystem;
• MPAM driver;
• RPMSG subsystem;
• Real Time Clock drivers;
• S/390 drivers;
• SCSI subsystem;
• ASPEED SoC drivers;
• Samsung SoC drivers;
• SPI subsystem;
• small TFT LCD display modules;
• Greybus lights staging drivers;
• Media staging drivers;
• Realtek RTL8723BS SDIO drivers;
• TCM subsystem;
• Trusted Execution Environment drivers;
• Thermal drivers;
• Thunderbolt and USB4 drivers;
• TTY drivers;
• UFS subsystem;
• Userspace I/O drivers;
• USB DSL drivers;
• Cypress C67X00 USB…

Several security issues were discovered in the Linux kernel. An attacker could possibly use these to compromise the system. This update corrects flaws in the following subsystems:

• USB Gadget drivers;
• Memory management;
• Multiple devices driver;
• ARM64 architecture;
• EROFS file system;
• Networking core;
• eXpress Data Path;
• ARM32 architecture;
• M68K architecture;
• MIPS architecture;
• OpenRISC architecture;
• PA-RISC architecture;
• PowerPC architecture;
• RISC-V architecture;
• S390 architecture;
• User-Mode Linux (UML);
• x86 architecture;
• Block layer subsystem;
• Cryptographic API;
• Compute Acceleration Framework;
• Intel NPU Driver;
• Speakup Console Speech Driver;
• ACPI drivers;
• Serial ATA and Parallel ATA drivers;
• Auxiliary display drivers;
• Drivers core;
• Micron PCIe SSD driver;
• Null block device driver;
• Ublk userspace block driver;
• Compressed RAM block device driver;
• Bluetooth drivers;
• Bus devices;
• AMD CDX bus driver;
• Hardware random number generator core;
• Character device driver;
• TPM device driver;
• Clock framework and drivers;
• Clocksource drivers;
• CPU frequency scaling framework;
• CPU idle management framework;
• Hardware crypto device drivers;
• CXL (Compute Express Link) drivers;
• DAX dirext access to differentiated memory framework;
• DIBS (Direct Internal Buffer Sharing) drivers;
• Buffer Sharing and Synchronization framework;
• DMA engine subsystem;
• EDAC drivers;
• FireWire subsystem;
• ARM SCMI message protocol;
• ARM SCPI message protocol;
• Google firmware drivers;
• Qualcomm firmware drivers;
• FPGA Framework;
• GPIO subsystem;
• GPU drivers;
• HID subsystem;
• HSI subsystem;
• Microsoft Hyper-V drivers;
• Hardware monitoring drivers;
• CoreSight HW tracing drivers;
• I2C subsystem;
• I3C subsystem;
• IIO subsystem;
• InfiniBand drivers;
• Input Device core drivers;
• Input Device (Miscellaneous) drivers;
• Input Device (Mouse) drivers;
• On-Chip Interconnect management framework;
• IOMMU subsystem;
• Industry Pack bus drivers;
• IRQ chip drivers;
• Mailbox framework;
• Media drivers;
• MemoryStick subsystem;
• Multifunction device drivers;
• Analog Devices digital potentiometer driver;
• Broadcom VK accelerator driver;
• Fastrpc Driver;
• Amazon Nitro Secure Module driver;
• SGI GRU driver;
• MMC subsystem;
• MTD block device drivers;
• Network drivers;
• Ethernet bonding driver;
• Mellanox network drivers;
• Microsoft Azure Network Adapter (MANA) driver;
• STMicroelectronics network drivers;
• Texas Instruments network drivers;
• MediaTek network drivers;
• Near Field Communication (NFC) drivers;
• NTB driver;
• NVDIMM (Non-Volatile Memory Device) drivers;
• NVME drivers;
• Device tree and open firmware driver;
• Operating Performance Points (OPP) driver;
• PA-RISC drivers;
• PCI subsystem;
• Performance monitor drivers;
• PHY drivers;
• Pin controllers subsystem;
• Chrome hardware platform drivers;
• Mellanox platform drivers;
• Microsoft Surface platform drivers;
• x86 platform drivers;
• MediaTek PM domains;
• Power sequencing drivers;
• Power supply drivers;
• Powercap sysfs driver;
• PTP clock framework;
• PWM drivers;
• RapidIO drivers;
• Voltage and Current Regulator drivers;
• Remote Processor subsystem;
• MPAM driver;
• RPMSG subsystem;
• Real Time Clock drivers;
• S/390 drivers;
• SCSI subsystem;
• ASPEED SoC drivers;
• Samsung SoC drivers;
• SPI subsystem;
• small TFT LCD display modules;
• Greybus lights staging drivers;
• Media staging drivers;
• Realtek RTL8723BS SDIO drivers;
• TCM subsystem;
• Trusted Execution Environment drivers;
• Thermal drivers;
• Thunderbolt and USB4 drivers;
• TTY drivers;
• UFS subsystem;
• Userspace I/O drivers;
• USB DSL drivers;
• Cypress C67X00 USB…