CVE-2026-99091

In the Linux kernel, the following vulnerability has been resolved:

Bluetooth: MGMT: Fix status of pending commands flushed on power off

cmd_complete_rsp() receives a struct cmd_lookup and, for a pending command that has no cmd_complete callback, falls through to cmd_status_rsp(cmd, data). cmd_status_rsp() reads data as a u8 *, so the status sent comes from the first byte of match->sk's representation, not from match->mgmt_status.

commit f53e1c9c726d ("Bluetooth: MGMT: Fix possible crash on mgmt_index_removed") changed the callers' data from &status to &match and updated the cmd_complete branch to match->mgmt_status, but left the fall-through passing data unchanged.

In mgmt_index_removed() match->sk is NULL, so every such command is answered with status 0x00 (Success) instead of MGMT_STATUS_INVALID_INDEX. In __mgmt_power_off() it is NULL too, unless a Set Powered command was pending: then settings_rsp() has stored that command's socket in match->sk, and the byte sent comes from the socket pointer. Either way the status the caller set, MGMT_STATUS_NOT_POWERED (or MGMT_STATUS_INVALID_INDEX when the device is being unregistered), is lost.

Pass the status the callers set.

This was seen on a QCA9377 laptop: bluetoothd's Start Discovery, pending when the adapter was powered off, was answered with Command Status 0x00 and no parameters, and bluetoothd 5.72 crashed on the zero-length success. BlueZ master has since added the length check on that path ("adapter: Fix crash on short start discovery reply", BlueZ a734b06059cb), but userspace should still be told Not Powered, not Success.

Tested on Ubuntu 7.0.0-31 with a virtual controller (hci_vhci): power off is held in HCI Write Scan Enable while a Start Discovery is submitted, and the flush answers it with status 0x00 before this change and 0x0f (Not Powered) after.

In the Linux kernel, the following vulnerability has been resolved:

Bluetooth: MGMT: Fix status of pending commands flushed on power off

cmd_complete_rsp() receives a struct cmd_lookup and, for a pending command that has no cmd_complete callback, falls through to cmd_status_rsp(cmd, data). cmd_status_rsp() reads data as a u8 *, so the status sent comes from the first byte of match->sk's representation, not from match->mgmt_status.

commit f53e1c9c726d ("Bluetooth: MGMT: Fix possible crash on mgmt_index_removed") changed the callers' data from &status to &match and updated the cmd_complete branch to match->mgmt_status, but left the fall-through passing data unchanged.

In mgmt_index_removed() match->sk is NULL, so every such command is answered with status 0x00 (Success) instead of MGMT_STATUS_INVALID_INDEX. In __mgmt_power_off() it is NULL too, unless a Set Powered command was pending: then settings_rsp() has stored that command's socket in match->sk, and the byte sent comes from the socket pointer. Either way the status the caller set, MGMT_STATUS_NOT_POWERED (or MGMT_STATUS_INVALID_INDEX when the device is being unregistered), is lost.

Pass the status the callers set.

This was seen on a QCA9377 laptop: bluetoothd's Start Discovery, pending when the adapter was powered off, was answered with Command Status 0x00 and no parameters, and bluetoothd 5.72 crashed on the zero-length success. BlueZ master has since added the length check on that path ("adapter: Fix crash on short start discovery reply", BlueZ a734b06059cb), but userspace should still be told Not Powered, not Success.

Tested on Ubuntu 7.0.0-31 with a virtual controller (hci_vhci): power off is held in HCI Write Scan Enable while a Start Discovery is submitted, and the flush answers it with status 0x00 before this change and 0x0f (Not Powered) after.

In the Linux kernel, the following vulnerability has been resolved:

Bluetooth: MGMT: Fix status of pending commands flushed on power off

cmd_complete_rsp() receives a struct cmd_lookup and, for a pending command that has no cmd_complete callback, falls through to cmd_status_rsp(cmd, data). cmd_status_rsp() reads data as a u8 *, so the status sent comes from the first byte of match->sk's representation, not from match->mgmt_status.

commit f53e1c9c726d ("Bluetooth: MGMT: Fix possible crash on mgmt_index_removed") changed the callers' data from &status to &match and updated the cmd_complete branch to match->mgmt_status, but left the fall-through passing data unchanged.

In mgmt_index_removed() match->sk is NULL, so every such command is answered with status 0x00 (Success) instead of MGMT_STATUS_INVALID_INDEX. In __mgmt_power_off() it is NULL too, unless a Set Powered command was pending: then settings_rsp() has stored that command's socket in match->sk, and the byte sent comes from the socket pointer. Either way the status the caller set, MGMT_STATUS_NOT_POWERED (or MGMT_STATUS_INVALID_INDEX when the device is being unregistered), is lost.

Pass the status the callers set.

This was seen on a QCA9377 laptop: bluetoothd's Start Discovery, pending when the adapter was powered off, was answered with Command Status 0x00 and no parameters, and bluetoothd 5.72 crashed on the zero-length success. BlueZ master has since added the length check on that path ("adapter: Fix crash on short start discovery reply", BlueZ a734b06059cb), but userspace should still be told Not Powered, not Success.

Tested on Ubuntu 7.0.0-31 with a virtual controller (hci_vhci): power off is held in HCI Write Scan Enable while a Start Discovery is submitted, and the flush answers it with status 0x00 before this change and 0x0f (Not Powered) after.

In the Linux kernel, the following vulnerability has been resolved:

Bluetooth: MGMT: Fix status of pending commands flushed on power off

cmd_complete_rsp() receives a struct cmd_lookup and, for a pending command that has no cmd_complete callback, falls through to cmd_status_rsp(cmd, data). cmd_status_rsp() reads data as a u8 *, so the status sent comes from the first byte of match->sk's representation, not from match->mgmt_status.

commit f53e1c9c726d ("Bluetooth: MGMT: Fix possible crash on mgmt_index_removed") changed the callers' data from &status to &match and updated the cmd_complete branch to match->mgmt_status, but left the fall-through passing data unchanged.

In mgmt_index_removed() match->sk is NULL, so every such command is answered with status 0x00 (Success) instead of MGMT_STATUS_INVALID_INDEX. In __mgmt_power_off() it is NULL too, unless a Set Powered command was pending: then settings_rsp() has stored that command's socket in match->sk, and the byte sent comes from the socket pointer. Either way the status the caller set, MGMT_STATUS_NOT_POWERED (or MGMT_STATUS_INVALID_INDEX when the device is being unregistered), is lost.

Pass the status the callers set.

This was seen on a QCA9377 laptop: bluetoothd's Start Discovery, pending when the adapter was powered off, was answered with Command Status 0x00 and no parameters, and bluetoothd 5.72 crashed on the zero-length success. BlueZ master has since added the length check on that path ("adapter: Fix crash on short start discovery reply", BlueZ a734b06059cb), but userspace should still be told Not Powered, not Success.

Tested on Ubuntu 7.0.0-31 with a virtual controller (hci_vhci): power off is held in HCI Write Scan Enable while a Start Discovery is submitted, and the flush answers it with status 0x00 before this change and 0x0f (Not Powered) after.

In the Linux kernel, the following vulnerability has been resolved:

Bluetooth: MGMT: Fix status of pending commands flushed on power off

cmd_complete_rsp() receives a struct cmd_lookup and, for a pending command that has no cmd_complete callback, falls through to cmd_status_rsp(cmd, data). cmd_status_rsp() reads data as a u8 *, so the status sent comes from the first byte of match->sk's representation, not from match->mgmt_status.

commit f53e1c9c726d ("Bluetooth: MGMT: Fix possible crash on mgmt_index_removed") changed the callers' data from &status to &match and updated the cmd_complete branch to match->mgmt_status, but left the fall-through passing data unchanged.

In mgmt_index_removed() match->sk is NULL, so every such command is answered with status 0x00 (Success) instead of MGMT_STATUS_INVALID_INDEX. In __mgmt_power_off() it is NULL too, unless a Set Powered command was pending: then settings_rsp() has stored that command's socket in match->sk, and the byte sent comes from the socket pointer. Either way the status the caller set, MGMT_STATUS_NOT_POWERED (or MGMT_STATUS_INVALID_INDEX when the device is being unregistered), is lost.

Pass the status the callers set.

This was seen on a QCA9377 laptop: bluetoothd's Start Discovery, pending when the adapter was powered off, was answered with Command Status 0x00 and no parameters, and bluetoothd 5.72 crashed on the zero-length success. BlueZ master has since added the length check on that path ("adapter: Fix crash on short start discovery reply", BlueZ a734b06059cb), but userspace should still be told Not Powered, not Success.

Tested on Ubuntu 7.0.0-31 with a virtual controller (hci_vhci): power off is held in HCI Write Scan Enable while a Start Discovery is submitted, and the flush answers it with status 0x00 before this change and 0x0f (Not Powered) after.

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: MGMT: Fix status of pending commands flushed on power off cmd_complete_rsp() receives a struct cmd_lookup and, for a pending command that has no cmd_complete callback, falls through to cmd_status_rsp(cmd, data). cmd_status_rsp() reads data as a u8 *, so the status sent comes from the first byte of match->sk's representation, not from match->mgmt_status. commit f53e1c9c726d ("Bluetooth: MGMT: Fix possible crash on mgmt_index_removed") changed the callers' data from &status to &match and updated the cmd_complete branch to match->mgmt_status, but left the fall-through passing data unchanged. In mgmt_index_removed() match->sk is NULL, so every such command is answered with status 0x00 (Success) instead of MGMT_STATUS_INVALID_INDEX. In __mgmt_power_off() it is NULL too, unless a Set Powered command was pending: then settings_rsp() has stored that command's socket in match->sk, and the byte sent comes from the socket pointer. Either way the status the caller set, MGMT_STATUS_NOT_POWERED (or MGMT_STATUS_INVALID_INDEX when the device is being unregistered), is lost. Pass the status the callers set. This was seen on a QCA9377 laptop: bluetoothd's Start Discovery, pending when the adapter was powered off, was answered with Command Status 0x00 and no parameters, and bluetoothd 5.72 crashed on the zero-length success. BlueZ master has since added the length check on that path ("adapter: Fix crash on short start discovery reply", BlueZ a734b06059cb), but userspace should still be told Not Powered, not Success. Tested on Ubuntu 7.0.0-31 with a virtual controller (hci_vhci): power off is held in HCI Write Scan Enable while a Start Discovery is submitted, and the flush answers it with status 0x00 before this change and 0x0f (Not Powered) after.

The SUSE Linux Enterprise Micro 6.0 and Micro 6.1 kernel was updated to fix various security issues:

The following security issues were fixed:

• CVE-2025-68219: cifs: fix memory leak in smb3_fs_context_parse_param error path (bsc#1255222).
• CVE-2026-31708: smb: client: fix OOB read in smb2_ioctl_query_info QUERY_INFO path (bsc#1264022).
• CVE-2026-31709: smb: client: validate the whole DACL before rewriting it in cifsacl (bsc#1264024).
• CVE-2026-43350: smb: client: require a full NFS mode SID before reading mode bits (bsc#1264985).
• CVE-2026-46155: smb/client: fix out-of-bounds read in smb2_compound_op() (bsc#1267720).
• CVE-2026-64324: udf: validate free block extents against the partition length (bsc#1273970).
• CVE-2026-64370: posix-cpu-timers: Fix pid refcount leak in do_cpu_nanosleep() error path (bsc#1273805).
• CVE-2026-64380: smb: client: harden POSIX SID length parsing (bsc#1273557).
• CVE-2026-64413: netfilter: ebtables: zero chainstack array (bsc#1274082).
• CVE-2026-64435: audit: Fix data races of skb_queue_len() readers on audit_queue (bsc#1274080).
• CVE-2026-68186: binfmt_misc: set have_execfd only once the interpreter is opened (bsc#1274949).
• CVE-2026-68447: drm/amdkfd: clamp v9 CRIU control stack checkpoint copy to BO size (bsc#1276280).
• CVE-2026-72010: cgroup/cpuset: rebind mm mempolicy to effective_mems, not mems_allowed (bsc#1276776).
• CVE-2026-72110: bpf,fork: wipe ->bpf_storage before bailouts that access it (bsc#1277357).
• CVE-2026-72111: bpf: Reset register bounds before narrowing retval range in check_mem_access() (bsc#1277389).
• CVE-2026-72127: netdev-genl: report NAPI thread PID in the caller's pid namespace (bsc#1277542).
• CVE-2026-72250: netfilter: nf_conntrack_reasm: guard mac_header adjustment after IPv6 defrag (bsc#1277663).
• CVE-2026-72253: netfilter: nf_conntrack_sip: validate skb_dst() before accessing it (bsc#1277665).
• CVE-2026-72318: cifs: validate DFS referral string offsets (bsc#1275939).
• CVE-2026-72400: seg6: validate SRH length before reading fixed fields (bsc#1278030).
• CVE-2026-72405: net: udp_tunnel: prevent double queueing in udp_tunnel_nic_device_sync (bsc#1278033).
• CVE-2026-72416: netfilter: nft_compat: ebtables emulation must reject non-bridge targets (bsc#1278041).
• CVE-2026-72428: bpf: Fix stack slot index in nospec checks (bsc#1278050).
• CVE-2026-74368: wifi: ath12k: fix memory leak in ath12k_wifi7_dp_rx_h_verify_tkip_mic() (bsc#1277103).
• CVE-2026-74399: evm: terminate and bound the evm_xattrs read buffer (bsc#1278319).
• CVE-2026-74565: netfilter: nf_tables: make nft_object rhltable per table (bsc#1275568).
• CVE-2026-74613: vsock/virtio: avoid refilling the RX queue after teardown (bsc#1277903).
• CVE-2026-74620: net/sched: act_gact, act_police: range check the fallback control action (bsc#1277044).
• CVE-2026-74624: netfilter: nf_conntrack: defer invalid log until after unlock (bsc#1277599).
• CVE-2026-74715: net: netfilter: Make ct zone opts configurable for bpf ct helpers (bsc#1277890).
• CVE-2026-74720: bpf: Preserve pointer state for commuted arithmetic (bsc#1276574).
• CVE-2026-74746: netfilter: flowtable: publish GC-visible tuple last (bsc#1278101).
• CVE-2026-74748: netfilter: ipset: fix refcount race between list:set GC and swap (bsc#1277578).
• CVE-2026-80572: Input: byd - synchronize timer deletion before freeing private data (bsc#1277338).
• CVE-2026-80602: perf/x86/amd/lbr: Fix kernel address leakage (bsc#1278123).
• CVE-2026-80637: netfilter: synproxy: fix unaligned memory access in timestamp adjustment (bsc#1278343).
• CVE-2026-80684: KVM: s390: pci: Fix NULL dereference on AIBV allocation failure (bsc#1277467).
• CVE-2026-80709: s390/zcrypt: Fix wrong domain value verification with EP11 CPRBs (bsc#1278202).
• CVE-2026-80717: sctp: validate Adaptation Indication parameter length (bsc#1277836).
• CVE-2026-80755: selinux: reject a permission value exceeding the class permission count (bsc#1278415).
• CVE-2026-80757: selinux: reject a…

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: MGMT: Fix status of pending commands flushed on power off cmd_complete_rsp() receives a struct cmd_lookup and, for a pending command that has no cmd_complete callback, falls through to cmd_status_rsp(cmd, data). cmd_status_rsp() reads data as a u8 *, so the status sent comes from the first byte of match->sk's representation, not from match->mgmt_status. commit f53e1c9c726d ("Bluetooth: MGMT: Fix possible crash on mgmt_index_removed") changed the callers' data from &status to &match and updated the cmd_complete branch to match->mgmt_status, but left the fall-through passing data unchanged. In mgmt_index_removed() match->sk is NULL, so every such command is answered with status 0x00 (Success) instead of MGMT_STATUS_INVALID_INDEX. In __mgmt_power_off() it is NULL too, unless a Set Powered command was pending: then settings_rsp() has stored that command's socket in match->sk, and the byte sent comes from the socket pointer. Either way the status the caller set, MGMT_STATUS_NOT_POWERED (or MGMT_STATUS_INVALID_INDEX when the device is being unregistered), is lost. Pass the status the callers set. This was seen on a QCA9377 laptop: bluetoothd's Start Discovery, pending when the adapter was powered off, was answered with Command Status 0x00 and no parameters, and bluetoothd 5.72 crashed on the zero-length success. BlueZ master has since added the length check on that path ("adapter: Fix crash on short start discovery reply", BlueZ a734b06059cb), but userspace should still be told Not Powered, not Success. Tested on Ubuntu 7.0.0-31 with a virtual controller (hci_vhci): power off is held in HCI Write Scan Enable while a Start Discovery is submitted, and the flush answers it with status 0x00 before this change and 0x0f (Not Powered) after.