Every CVE Search/ Get API key

CVE-2026-73564

frp: Unauthenticated Remote Denial of Service in the frp SSH Tunnel Gateway via Integer Overflow

8.7 HighFix available

frp is a fast reverse proxy. From 0.53.0 until 0.70.1, frp's optional SSH Tunnel Gateway in pkg/ssh/server.go parses an SSH exec channel request by adding 4 to an attacker-controlled four-byte big-endian length. A length of 0xFFFFFFFF makes the uint32 addition wrap to 3, defeats the payload bounds check, and causes payload[4:3] to panic in TunnelServer.handleNewChannel. When no authorized-keys file is configured, sshConfig.NoClientAuth permits an unauthenticated peer to reach this channel phase before the frp token is checked, so a single five-byte request terminates the frps process and drops every active tunnel. This issue is fixed in version 0.70.1.

Attack profile

How easy it is to exploit

Attack vector
Network
Complexity
Low
Privileges needed
None
User interaction
None

What an attacker can affect

Confidentiality
None
Integrity
None
Availability
High

Exploit likelihood

0.52%Up 0.1 points since Aug 14, 2026
90%50%10%1%

What each source reports

CVE List Score used 8.7

frp: Unauthenticated Remote Denial of Service in the frp SSH Tunnel Gateway via Integer Overflow

frp is a fast reverse proxy. From 0.53.0 until 0.70.1, frp's optional SSH Tunnel Gateway in pkg/ssh/server.go parses an SSH exec channel request by adding 4 to an attacker-controlled four-byte big-endian length. A length of 0xFFFFFFFF makes the uint32 addition wrap to 3, defeats the payload bounds check, and causes payload[4:3] to panic in TunnelServer.handleNewChannel. When no authorized-keys file is configured, sshConfig.NoClientAuth permits an unauthenticated peer to reach this channel phase before the frp token is checked, so a single five-byte request terminates the frps process and drops every active tunnel. This issue is fixed in version 0.70.1.

Record
CVE-2026-73564
CVSS 4.0
8.7 HighCVSS:4.0/AV:N/AC:L/AT:N/PR:N/UI:N/VC:N/VI:N/VA:H/SC:N/SI:N/SA:N
Weakness
CWE-129, CWE-190
Updated
2026-11-02
EUVDEUVD-2026-58179 8.7

frp is a fast reverse proxy. From 0.53.0 until 0.70.1, frp's optional SSH Tunnel Gateway in pkg/ssh/server.go parses an SSH exec channel request by adding 4 to an attacker-controlled four-byte big-endian length. A length of 0xFFFFFFFF makes the uint32 addition wrap to 3, defeats the payload bounds check, and causes payload[4:3] to panic in TunnelServer.handleNewChannel. When no authorized-keys file is configured, sshConfig.NoClientAuth permits an unauthenticated peer to reach this channel phase before the frp token is checked, so a single five-byte request terminates the frps process and drops every active tunnel. This issue is fixed in version 0.70.1.

Record
EUVD-2026-58179
CVSS 4.0
8.7 HighCVSS:4.0/AV:N/AC:L/AT:N/PR:N/UI:N/VC:N/VI:N/VA:H/SC:N/SI:N/SA:N
Updated
2026-11-02
GitHub AdvisoriesGHSA-26gq-p25f-99cp 8.2

frp: Unauthenticated Remote Denial of Service in the frp SSH Tunnel Gateway via Integer Overflow

Summary

An integer-overflow vulnerability in the frp server's optional SSH Tunnel Gateway lets any unauthenticated remote attacker crash the entire frps process with a single five-byte message. When the gateway parses an SSH exec channel request in pkg/ssh/server.go, it adds a small constant to a four-byte length value taken directly from the request. Because that length is fully attacker-controlled, a value of 0xFFFFFFFF makes the addition wrap around to a tiny number, defeating the only bounds check and forcing an out-of-range slice. Go raises a panic that nothing recovers, so the whole server exits. In the default gateway mode SSH clients are not authenticated and the request is handled before any frp token is checked, so the crash is reachable pre-authentication. It carries no state and is trivially repeatable, turning one crash into a sustained outage that drops every tunnel for every user.

Details

The exec request payload is a four-byte big-endian length followed by that many command bytes, and the length field is fully attacker-controlled. The gateway computes the end of the command as 4 + length. The constant 4 takes the uint32 type of the length field, so 4 + 0xFFFFFFFF wraps modulo 2^32 to 3. The only guard compares the real payload size against this wrapped value, so a five-byte payload passes the test 5 < 3, and the slice runs from index 4 to index 3:

// pkg/ssh/server.go:315-319
end := 4 + binary.BigEndian.Uint32(req.Payload[:4])  // 4 + 0xFFFFFFFF wraps to 3
if len(req.Payload) < int(end) {                     // 5 < 3 is false, so it passes
    continue
}
extraPayload := string(req.Payload[4:end])           // payload[4:3] -> panic

The handler runs in a bare goroutine and no function in the call chain installs a recover, so the panic unwinds to the top of the goroutine and terminates the whole process rather than the single connection:

// pkg/ssh/server.go:226
go s.handleNewChannel(newChannel, extraPayloadCh)    // no recover anywhere in the chain

The sink is reachable without credentials in the default configuration. When no authorized-keys file is set, the gateway disables SSH client authentication, which is the default and documented mode where users authenticate through the frp token embedded in the SSH command. The exec request is processed during the channel phase, before that token is validated, so an unauthenticated peer reaches the sink:

// pkg/ssh/gateway.go:74
sshConfig.NoClientAuth = cfg.AuthorizedKeysFile == ""  // default: no client auth

Affected product: frp (fatedier), frps server, SSH Tunnel Gateway Affected versions: v0.53.0 (when the gateway was introduced) through v0.70.0, confirmed against a v0.70.0 build

PoC

The SSH Tunnel Gateway must be enabled with no authorized-keys file, which is the default mode of any deployment that turns the gateway on. No credentials and no knowledge of the target are required.

Enable the gateway on a stock v0.70.0 build:

bindPort = 7000

[sshTunnelGateway]
bindPort = 2200

As an unauthenticated SSH client, open a session channel and send one exec request whose four-byte length prefix is 0xFFFFFFFF followed by a single byte, giving the five-byte payload ff ff ff ff 41. The server immediately panics and exits:

panic: runtime error: slice bounds out of range [4:3]
...github.com/fatedier/frp/pkg/ssh.(*TunnelServer).handleNewChannel
    .../frp/pkg/ssh/server.go:319

The shell prompt returns in the server terminal, confirming the whole process has terminated and every other client tunnel is dropped at the same instant. A well-formed request of the same length (prefix 1) leaves the server running, proving the crash is caused by the overflow value and not by the exec request itself. The attacker can re-send the payload after any restart to hold the server down indefinitely.

Impact

This is an unauthenticated remote denial of service (CWE-190) leading…

Record
GHSA-26gq-p25f-99cp
CVSS 4.0
8.2 HighCVSS:4.0/AV:N/AC:L/AT:P/PR:N/UI:N/VC:N/VI:N/VA:H/SC:N/SI:N/SA:N
Weakness
CWE-129, CWE-190
Updated
2026-11-02
NVD 8.7

frp is a fast reverse proxy. From 0.53.0 until 0.70.1, frp's optional SSH Tunnel Gateway in pkg/ssh/server.go parses an SSH exec channel request by adding 4 to an attacker-controlled four-byte big-endian length. A length of 0xFFFFFFFF makes the uint32 addition wrap to 3, defeats the payload bounds check, and causes payload[4:3] to panic in TunnelServer.handleNewChannel. When no authorized-keys file is configured, sshConfig.NoClientAuth permits an unauthenticated peer to reach this channel phase before the frp token is checked, so a single five-byte request terminates the frps process and drops every active tunnel. This issue is fixed in version 0.70.1.

Record
CVE-2026-73564
CVSS 4.0
8.7 HighCVSS:4.0/AV:N/AC:L/AT:N/PR:N/UI:N/VC:N/VI:N/VA:H/SC:N/SI:N/SA:N/E:X/CR:X/IR:X/AR:X/MAV:X/MAC:X/MAT:X/MPR:X/MUI:X/MVC:X/MVI:X/MVA:X/MSC:X/MSI:X/MSA:X/S:X/AU:X/R:X/V:X/RE:X/U:X
Weakness
CWE-129, CWE-190
Updated
2026-11-02
OSV 8.7

frp: Unauthenticated Remote Denial of Service in the frp SSH Tunnel Gateway via Integer Overflow

frp is a fast reverse proxy. From 0.53.0 until 0.70.1, frp's optional SSH Tunnel Gateway in pkg/ssh/server.go parses an SSH exec channel request by adding 4 to an attacker-controlled four-byte big-endian length. A length of 0xFFFFFFFF makes the uint32 addition wrap to 3, defeats the payload bounds check, and causes payload[4:3] to panic in TunnelServer.handleNewChannel. When no authorized-keys file is configured, sshConfig.NoClientAuth permits an unauthenticated peer to reach this channel phase before the frp token is checked, so a single five-byte request terminates the frps process and drops every active tunnel. This issue is fixed in version 0.70.1.

Record
CVE-2026-73564
CVSS 4.0
8.7 HighCVSS:4.0/AV:N/AC:L/AT:N/PR:N/UI:N/VC:N/VI:N/VA:H/SC:N/SI:N/SA:N
Weakness
CWE-129, CWE-190
Updated
2026-11-02
OSVGHSA-26gq-p25f-99cp 8.2

frp: Unauthenticated Remote Denial of Service in the frp SSH Tunnel Gateway via Integer Overflow

Summary

An integer-overflow vulnerability in the frp server's optional SSH Tunnel Gateway lets any unauthenticated remote attacker crash the entire frps process with a single five-byte message. When the gateway parses an SSH exec channel request in pkg/ssh/server.go, it adds a small constant to a four-byte length value taken directly from the request. Because that length is fully attacker-controlled, a value of 0xFFFFFFFF makes the addition wrap around to a tiny number, defeating the only bounds check and forcing an out-of-range slice. Go raises a panic that nothing recovers, so the whole server exits. In the default gateway mode SSH clients are not authenticated and the request is handled before any frp token is checked, so the crash is reachable pre-authentication. It carries no state and is trivially repeatable, turning one crash into a sustained outage that drops every tunnel for every user.

Details

The exec request payload is a four-byte big-endian length followed by that many command bytes, and the length field is fully attacker-controlled. The gateway computes the end of the command as 4 + length. The constant 4 takes the uint32 type of the length field, so 4 + 0xFFFFFFFF wraps modulo 2^32 to 3. The only guard compares the real payload size against this wrapped value, so a five-byte payload passes the test 5 < 3, and the slice runs from index 4 to index 3:

// pkg/ssh/server.go:315-319
end := 4 + binary.BigEndian.Uint32(req.Payload[:4])  // 4 + 0xFFFFFFFF wraps to 3
if len(req.Payload) < int(end) {                     // 5 < 3 is false, so it passes
    continue
}
extraPayload := string(req.Payload[4:end])           // payload[4:3] -> panic

The handler runs in a bare goroutine and no function in the call chain installs a recover, so the panic unwinds to the top of the goroutine and terminates the whole process rather than the single connection:

// pkg/ssh/server.go:226
go s.handleNewChannel(newChannel, extraPayloadCh)    // no recover anywhere in the chain

The sink is reachable without credentials in the default configuration. When no authorized-keys file is set, the gateway disables SSH client authentication, which is the default and documented mode where users authenticate through the frp token embedded in the SSH command. The exec request is processed during the channel phase, before that token is validated, so an unauthenticated peer reaches the sink:

// pkg/ssh/gateway.go:74
sshConfig.NoClientAuth = cfg.AuthorizedKeysFile == ""  // default: no client auth

Affected product: frp (fatedier), frps server, SSH Tunnel Gateway Affected versions: v0.53.0 (when the gateway was introduced) through v0.70.0, confirmed against a v0.70.0 build

PoC

The SSH Tunnel Gateway must be enabled with no authorized-keys file, which is the default mode of any deployment that turns the gateway on. No credentials and no knowledge of the target are required.

Enable the gateway on a stock v0.70.0 build:

bindPort = 7000

[sshTunnelGateway]
bindPort = 2200

As an unauthenticated SSH client, open a session channel and send one exec request whose four-byte length prefix is 0xFFFFFFFF followed by a single byte, giving the five-byte payload ff ff ff ff 41. The server immediately panics and exits:

panic: runtime error: slice bounds out of range [4:3]
...github.com/fatedier/frp/pkg/ssh.(*TunnelServer).handleNewChannel
    .../frp/pkg/ssh/server.go:319

The shell prompt returns in the server terminal, confirming the whole process has terminated and every other client tunnel is dropped at the same instant. A well-formed request of the same length (prefix 1) leaves the server running, proving the crash is caused by the overflow value and not by the exec request itself. The attacker can re-send the payload after any restart to hold the server down indefinitely.

Impact

This is an unauthenticated remote denial of service (CWE-190) leading…

Record
GHSA-26gq-p25f-99cp
CVSS 4.0
8.2 HighCVSS:4.0/AV:N/AC:L/AT:P/PR:N/UI:N/VC:N/VI:N/VA:H/SC:N/SI:N/SA:N
Weakness
CWE-129, CWE-190
Updated
2026-11-02
OSVGO-2026-6103 No score

frp: Unauthenticated Remote Denial of Service in the frp SSH Tunnel Gateway via Integer Overflow in github.com/fatedier/frp

frp: Unauthenticated Remote Denial of Service in the frp SSH Tunnel Gateway via Integer Overflow in github.com/fatedier/frp

Record
GO-2026-6103
Updated
2026-11-02
OSVopenSUSE-SU-2026:21761-1 No score

Security update for govulncheck-vulndb

This update for govulncheck-vulndb fixes the following issues:

  • Update to version 0.0.20260827T195228 2026-08-27T19:52:28Z (jsc#PED-11136).

    Go CVE Numbering Authority IDs added or updated with aliases:

    • GO-2026-5026 CVE-2026-39821
    • GO-2026-6225
    • GO-2026-6250 CVE-2026-63328 GHSA-8rc5-4fr6-64pw
    • GO-2026-6253 CVE-2026-17106 GHSA-hfg8-hc9c-6c3h
    • GO-2026-6254 CVE-2026-53941 GHSA-vjhx-2cqw-3q6q
    • GO-2026-6255 CVE-2026-61711 GHSA-7236-3392-c5c6
    • GO-2026-6256 CVE-2026-61712 GHSA-72x6-4j93-7w86
    • GO-2026-6258 CVE-2026-45404 GHSA-42cj-99w8-cp2p
    • GO-2026-6259 CVE-2026-32637 GHSA-j2g6-362q-6qc6
    • GO-2026-6260 CVE-2026-55149 GHSA-qqff-5854-px68
    • GO-2026-6261 CVE-2026-54061 GHSA-rrwh-6jrq-wp5v
    • GO-2026-6262 GHSA-22w5-2fxg-vrwx
    • GO-2026-6263 CVE-2026-54168 GHSA-6f2p-296r-cc28
    • GO-2026-6264 CVE-2026-54245 GHSA-7q96-f8xw-jv5j
    • GO-2026-6265 GHSA-8fxq-53rx-ph5f
    • GO-2026-6266 CVE-2026-54167 GHSA-f5f4-3hh4-f54m
    • GO-2026-6267 GHSA-h58c-xccx-75m3
    • GO-2026-6268 GHSA-q9c5-pp7m-fm2g
    • GO-2026-6269 GHSA-rxhg-vcww-2mpw
    • GO-2026-6270 CVE-2026-54162 GHSA-x3g7-qrwc-f6c5
    • GO-2026-6271 CVE-2026-67448 GHSA-8r62-w5wh-fc5m
    • GO-2026-6272 CVE-2026-67447 GHSA-r553-m4fv-5v97
    • GO-2026-6273 CVE-2026-64679 GHSA-26w5-6g95-gj28
    • GO-2026-6274 CVE-2026-76905 GHSA-mmfr-pmjx-hw9w
    • GO-2026-6275 CVE-2026-77354 GHSA-xhj3-7xw9-vr34
    • GO-2026-6277 GHSA-4ph6-mjv7-3fq6
    • GO-2026-6278 GHSA-w67g-5rqw-f597
    • GO-2026-6279 CVE-2026-6046 GHSA-3vmp-whvv-5v9v
    • GO-2026-6280 CVE-2026-7387 GHSA-6hxm-w4hv-vgvw
    • GO-2026-6281 CVE-2026-6961 GHSA-8qq9-cqj8-82w4
    • GO-2026-6282 CVE-2026-7184 GHSA-9p44-r552-4wp9
    • GO-2026-6283 CVE-2026-6689 GHSA-c28q-m4gf-vg4q
    • GO-2026-6284 CVE-2026-55477 GHSA-jm48-m3rr-9hgg
    • GO-2026-6285 CVE-2026-6739 GHSA-m2w9-h2mm-79qr
    • GO-2026-6286 CVE-2026-3433 GHSA-rp4v-qc77-phm4
    • GO-2026-6287 GHSA-vx2m-jpxr-xv7w
    • GO-2026-6288 CVE-2026-11624 GHSA-76g7-m3xw-x9gr
    • GO-2026-6289 GHSA-w8j7-39hp-8x59
    • GO-2026-6290 CVE-2026-55581 GHSA-3x77-wg38-92r3
    • GO-2026-6291 CVE-2026-55582 GHSA-74hp-mggr-hv58
    • GO-2026-6292 CVE-2026-55580 GHSA-f5pj-2738-996m
    • GO-2026-6293 CVE-2026-55677 GHSA-vfp3-v2gw-7wfq
    • GO-2026-6294 CVE-2026-55092 GHSA-mcj4-mphf-j9ff
    • GO-2026-6295 CVE-2026-55637 GHSA-cmwv-wf9p-p8wx
    • GO-2026-6296 CVE-2026-54523 GHSA-79gf-7frw-68m9
    • GO-2026-6297 CVE-2026-50879 GHSA-g743-m6x3-v6wm
    • GO-2026-6298 CVE-2026-54563 GHSA-w5fv-7x5q-g8qp
    • GO-2026-6299 CVE-2026-50884 GHSA-5442-mh7f-72px
    • GO-2026-6300 CVE-2026-50891 GHSA-rcqf-cpv9-g5jf
    • GO-2026-6301 CVE-2026-42350 GHSA-g7gw-m874-7rmf

  • Update to version 0.0.20260819T170606 2026-08-19T17:06:06Z.

    Go CVE Numbering Authority IDs added or updated with aliases:

    • GO-2026-4720 GHSA-v3mg-9v85-fcm7
    • GO-2026-4942 CVE-2026-35172 GHSA-f2g3-hh2r-cwgc
    • GO-2026-4950
    • GO-2026-6093 GHSA-464c-974j-9xm6
    • GO-2026-6094 GHSA-gcjh-h69q-9w9g
    • GO-2026-6095 GHSA-r277-6w6q-xmqw
    • GO-2026-6097 CVE-2026-55495 GHSA-49h3-cwhj-4737
    • GO-2026-6098 CVE-2026-55496 GHSA-8r7f-r8hj-r3rv
    • GO-2026-6099 CVE-2026-57497 GHSA-g35j-m5xg-vh3q
    • GO-2026-6100 CVE-2026-55497 GHSA-g9j2-8w95-3vwv
    • GO-2026-6101 CVE-2026-55502 GHSA-hq88-5x99-x3gf
    • GO-2026-6102 CVE-2026-55499 GHSA-w8x7-h2px-xmq8
    • GO-2026-6103 CVE-2026-73564 GHSA-26gq-p25f-99cp
    • GO-2026-6104 CVE-2026-62323 GHSA-c3jm-gv5r-9wcp
    • GO-2026-6105 GHSA-c534-2w9c-x7fm
    • GO-2026-6106 GHSA-v6w6-358x-2433
    • GO-2026-6107 CVE-2026-73500 GHSA-6vch-q96h-7gc3
    • GO-2026-6108 CVE-2026-73505 GHSA-6xj8-qv9j-xcjq
    • GO-2026-6109 GHSA-86cx-wwf4-phq4
    • GO-2026-6110 CVE-2026-73509 GHSA-95cv-r8x4-vh75
    • GO-2026-6111 CVE-2026-73506 GHSA-fwjx-9p69-h25h
    • GO-2026-6112 CVE-2026-73502 GHSA-jpcw-4wr7-c3vq
    • GO-2026-6113 GHSA-p6ph-3jx2-3337
    • GO-2026-6114 CVE-2026-73499 GHSA-xg4h-6gfc-h4m8
    • GO-2026-6115 CVE-2026-56867
    • GO-2026-6117 GHSA-hp74-gm6m-2qm5
    • GO-2026-6118 CVE-2026-47427 GHSA-w4q6-qw23-4rg7
    • GO-2026-6119 CVE-2026-43983…
Record
openSUSE-SU-2026:21761-1
Updated
2026-11-02
OSVSUSE-SU-2026:23625-1 No score

Security update for govulncheck-vulndb

This update for govulncheck-vulndb fixes the following issues:

  • Update to version 0.0.20260827T195228 2026-08-27T19:52:28Z (jsc#PED-11136).

    Go CVE Numbering Authority IDs added or updated with aliases:

    • GO-2026-5026 CVE-2026-39821
    • GO-2026-6225
    • GO-2026-6250 CVE-2026-63328 GHSA-8rc5-4fr6-64pw
    • GO-2026-6253 CVE-2026-17106 GHSA-hfg8-hc9c-6c3h
    • GO-2026-6254 CVE-2026-53941 GHSA-vjhx-2cqw-3q6q
    • GO-2026-6255 CVE-2026-61711 GHSA-7236-3392-c5c6
    • GO-2026-6256 CVE-2026-61712 GHSA-72x6-4j93-7w86
    • GO-2026-6258 CVE-2026-45404 GHSA-42cj-99w8-cp2p
    • GO-2026-6259 CVE-2026-32637 GHSA-j2g6-362q-6qc6
    • GO-2026-6260 CVE-2026-55149 GHSA-qqff-5854-px68
    • GO-2026-6261 CVE-2026-54061 GHSA-rrwh-6jrq-wp5v
    • GO-2026-6262 GHSA-22w5-2fxg-vrwx
    • GO-2026-6263 CVE-2026-54168 GHSA-6f2p-296r-cc28
    • GO-2026-6264 CVE-2026-54245 GHSA-7q96-f8xw-jv5j
    • GO-2026-6265 GHSA-8fxq-53rx-ph5f
    • GO-2026-6266 CVE-2026-54167 GHSA-f5f4-3hh4-f54m
    • GO-2026-6267 GHSA-h58c-xccx-75m3
    • GO-2026-6268 GHSA-q9c5-pp7m-fm2g
    • GO-2026-6269 GHSA-rxhg-vcww-2mpw
    • GO-2026-6270 CVE-2026-54162 GHSA-x3g7-qrwc-f6c5
    • GO-2026-6271 CVE-2026-67448 GHSA-8r62-w5wh-fc5m
    • GO-2026-6272 CVE-2026-67447 GHSA-r553-m4fv-5v97
    • GO-2026-6273 CVE-2026-64679 GHSA-26w5-6g95-gj28
    • GO-2026-6274 CVE-2026-76905 GHSA-mmfr-pmjx-hw9w
    • GO-2026-6275 CVE-2026-77354 GHSA-xhj3-7xw9-vr34
    • GO-2026-6277 GHSA-4ph6-mjv7-3fq6
    • GO-2026-6278 GHSA-w67g-5rqw-f597
    • GO-2026-6279 CVE-2026-6046 GHSA-3vmp-whvv-5v9v
    • GO-2026-6280 CVE-2026-7387 GHSA-6hxm-w4hv-vgvw
    • GO-2026-6281 CVE-2026-6961 GHSA-8qq9-cqj8-82w4
    • GO-2026-6282 CVE-2026-7184 GHSA-9p44-r552-4wp9
    • GO-2026-6283 CVE-2026-6689 GHSA-c28q-m4gf-vg4q
    • GO-2026-6284 CVE-2026-55477 GHSA-jm48-m3rr-9hgg
    • GO-2026-6285 CVE-2026-6739 GHSA-m2w9-h2mm-79qr
    • GO-2026-6286 CVE-2026-3433 GHSA-rp4v-qc77-phm4
    • GO-2026-6287 GHSA-vx2m-jpxr-xv7w
    • GO-2026-6288 CVE-2026-11624 GHSA-76g7-m3xw-x9gr
    • GO-2026-6289 GHSA-w8j7-39hp-8x59
    • GO-2026-6290 CVE-2026-55581 GHSA-3x77-wg38-92r3
    • GO-2026-6291 CVE-2026-55582 GHSA-74hp-mggr-hv58
    • GO-2026-6292 CVE-2026-55580 GHSA-f5pj-2738-996m
    • GO-2026-6293 CVE-2026-55677 GHSA-vfp3-v2gw-7wfq
    • GO-2026-6294 CVE-2026-55092 GHSA-mcj4-mphf-j9ff
    • GO-2026-6295 CVE-2026-55637 GHSA-cmwv-wf9p-p8wx
    • GO-2026-6296 CVE-2026-54523 GHSA-79gf-7frw-68m9
    • GO-2026-6297 CVE-2026-50879 GHSA-g743-m6x3-v6wm
    • GO-2026-6298 CVE-2026-54563 GHSA-w5fv-7x5q-g8qp
    • GO-2026-6299 CVE-2026-50884 GHSA-5442-mh7f-72px
    • GO-2026-6300 CVE-2026-50891 GHSA-rcqf-cpv9-g5jf
    • GO-2026-6301 CVE-2026-42350 GHSA-g7gw-m874-7rmf

  • Update to version 0.0.20260819T170606 2026-08-19T17:06:06Z.

    Go CVE Numbering Authority IDs added or updated with aliases:

    • GO-2026-4720 GHSA-v3mg-9v85-fcm7
    • GO-2026-4942 CVE-2026-35172 GHSA-f2g3-hh2r-cwgc
    • GO-2026-4950
    • GO-2026-6093 GHSA-464c-974j-9xm6
    • GO-2026-6094 GHSA-gcjh-h69q-9w9g
    • GO-2026-6095 GHSA-r277-6w6q-xmqw
    • GO-2026-6097 CVE-2026-55495 GHSA-49h3-cwhj-4737
    • GO-2026-6098 CVE-2026-55496 GHSA-8r7f-r8hj-r3rv
    • GO-2026-6099 CVE-2026-57497 GHSA-g35j-m5xg-vh3q
    • GO-2026-6100 CVE-2026-55497 GHSA-g9j2-8w95-3vwv
    • GO-2026-6101 CVE-2026-55502 GHSA-hq88-5x99-x3gf
    • GO-2026-6102 CVE-2026-55499 GHSA-w8x7-h2px-xmq8
    • GO-2026-6103 CVE-2026-73564 GHSA-26gq-p25f-99cp
    • GO-2026-6104 CVE-2026-62323 GHSA-c3jm-gv5r-9wcp
    • GO-2026-6105 GHSA-c534-2w9c-x7fm
    • GO-2026-6106 GHSA-v6w6-358x-2433
    • GO-2026-6107 CVE-2026-73500 GHSA-6vch-q96h-7gc3
    • GO-2026-6108 CVE-2026-73505 GHSA-6xj8-qv9j-xcjq
    • GO-2026-6109 GHSA-86cx-wwf4-phq4
    • GO-2026-6110 CVE-2026-73509 GHSA-95cv-r8x4-vh75
    • GO-2026-6111 CVE-2026-73506 GHSA-fwjx-9p69-h25h
    • GO-2026-6112 CVE-2026-73502 GHSA-jpcw-4wr7-c3vq
    • GO-2026-6113 GHSA-p6ph-3jx2-3337
    • GO-2026-6114 CVE-2026-73499 GHSA-xg4h-6gfc-h4m8
    • GO-2026-6115 CVE-2026-56867
    • GO-2026-6117 GHSA-hp74-gm6m-2qm5
    • GO-2026-6118 CVE-2026-47427 GHSA-w4q6-qw23-4rg7
    • GO-2026-6119 CVE-2026-43983…
Record
SUSE-SU-2026:23625-1
Updated
2026-11-02

Affected products

Affected packages

Affected packages
PackageAffectedFixed
github.com/fatedier/frp
Go
 0.53.0 to 0.70.0
0.70.1
github.com/fatedier/frp
Go
 0.53.0 up to 0.70.1
0.70.1
govulncheck-vulndb
SUSE:Linux Enterprise Server 16.0
From an advisory covering 181 CVEs
 before 0.0.20260827T195228-160000.1.1
0.0.20260827T195228-160000.1.1
govulncheck-vulndb
SUSE:Linux Enterprise Server for SAP applications 16.0
From an advisory covering 181 CVEs
 before 0.0.20260827T195228-160000.1.1
0.0.20260827T195228-160000.1.1
govulncheck-vulndb
openSUSE:Leap 16.0
From an advisory covering 181 CVEs
 before 0.0.20260827T195228-160000.1.1
0.0.20260827T195228-160000.1.1

History

History
RecordedChangedSources
affected, facts
first indexedCVE List, EUVD, GitHub Advisories, NVD, OSV

Dates are when Every CVE recorded each change. Upstream dates may differ.

In short

CVE-2026-73564 is a high vulnerability (CVSS 8.7) in Fatedier Frp, published July 24, 2026. No source lists public exploit code. EPSS puts the chance of exploitation in the next 30 days at 0.52%, the 44th percentile. Fixed in github.com/fatedier/frp 0.70.1.

References

Show 184 moreShow less
This page doesn't list everything

Left out here: the rest of 4 source descriptions. The JSON record has them.

Pages All vulnerabilities Browse Docs Sources Guide Get API key
MoveEnter Open