CVE-2023-3446

Issue summary: Checking excessively long DH keys or parameters may be very slow.

Impact summary: Applications that use the functions DH_check(), DH_check_ex() or EVP_PKEY_param_check() to check a DH key or DH parameters may experience long delays. Where the key or parameters that are being checked have been obtained from an untrusted source this may lead to a Denial of Service.

The function DH_check() performs various checks on DH parameters. One of those checks confirms that the modulus ('p' parameter) is not too large. Trying to use a very large modulus is slow and OpenSSL will not normally use a modulus which is over 10,000 bits in length.

However the DH_check() function checks numerous aspects of the key or parameters that have been supplied. Some of those checks use the supplied modulus value even if it has already been found to be too large.

An application that calls DH_check() and supplies a key or parameters obtained from an untrusted source could be vulernable to a Denial of Service attack.

The function DH_check() is itself called by a number of other OpenSSL functions. An application calling any of those other functions may similarly be affected. The other functions affected by this are DH_check_ex() and EVP_PKEY_param_check().

Also vulnerable are the OpenSSL dhparam and pkeyparam command line applications when using the '-check' option.

The OpenSSL SSL/TLS implementation is not affected by this issue. The OpenSSL 3.0 and 3.1 FIPS providers are not affected by this issue.

Issue summary: Checking excessively long DH keys or parameters may be very slow.

Impact summary: Applications that use the functions DH_check(), DH_check_ex() or EVP_PKEY_param_check() to check a DH key or DH parameters may experience long delays. Where the key or parameters that are being checked have been obtained from an untrusted source this may lead to a Denial of Service.

The function DH_check() performs various checks on DH parameters. One of those checks confirms that the modulus ('p' parameter) is not too large. Trying to use a very large modulus is slow and OpenSSL will not normally use a modulus which is over 10,000 bits in length.

However the DH_check() function checks numerous aspects of the key or parameters that have been supplied. Some of those checks use the supplied modulus value even if it has already been found to be too large.

An application that calls DH_check() and supplies a key or parameters obtained from an untrusted source could be vulernable to a Denial of Service attack.

The function DH_check() is itself called by a number of other OpenSSL functions. An application calling any of those other functions may similarly be affected. The other functions affected by this are DH_check_ex() and EVP_PKEY_param_check().

Also vulnerable are the OpenSSL dhparam and pkeyparam command line applications when using the '-check' option.

The OpenSSL SSL/TLS implementation is not affected by this issue. The OpenSSL 3.0 and 3.1 FIPS providers are not affected by this issue.

Issue summary: Checking excessively long DH keys or parameters may be very slow. Impact summary: Applications that use the functions DH_check(), DH_check_ex() or EVP_PKEY_param_check() to check a DH key or DH parameters may experience long delays. Where the key or parameters that are being checked have been obtained from an untrusted source this may lead to a Denial of Service. The function DH_check() performs various checks on DH parameters. One of those checks confirms that the modulus ('p' parameter) is not too large. Trying to use a very large modulus is slow and OpenSSL will not normally use a modulus which is over 10,000 bits in length. However the DH_check() function checks numerous aspects of the key or parameters that have been supplied. Some of those checks use the supplied modulus value even if it has already been found to be too large. An application that calls DH_check() and supplies a key or parameters obtained from an untrusted source could be vulernable to a Denial of Service attack. The function DH_check() is itself called by a number of other OpenSSL functions. An application calling any of those other functions may similarly be affected. The other functions affected by this are DH_check_ex() and EVP_PKEY_param_check(). Also vulnerable are the OpenSSL dhparam and pkeyparam command line applications when using the '-check' option. The OpenSSL SSL/TLS implementation is not affected by this issue. The OpenSSL 3.0 and 3.1 FIPS providers are not affected by this issue.

OpenSSL is a robust, commercial-grade, and full-featured toolkit for the Transport Layer Security (TLS) and Secure Sockets Layer (SSL) protocols.

Security Fix(es):

Issue summary: Checking excessively long DH keys or parameters may be very slow.

Impact summary: Applications that use the functions DH_check(), DH_check_ex() or EVP_PKEY_param_check() to check a DH key or DH parameters may experience long delays. Where the key or parameters that are being checked have been obtained from an untrusted source this may lead to a Denial of Service.

The function DH_check() performs various checks on DH parameters. One of those checks confirms that the modulus ('p' parameter) is not too large. Trying to use a very large modulus is slow and OpenSSL will not normally use a modulus which is over 10,000 bits in length.

However the DH_check() function checks numerous aspects of the key or parameters that have been supplied. Some of those checks use the supplied modulus value even if it has already been found to be too large.

An application that calls DH_check() and supplies a key or parameters obtained from an untrusted source could be vulernable to a Denial of Service attack.

The function DH_check() is itself called by a number of other OpenSSL functions. An application calling any of those other functions may similarly be affected. The other functions affected by this are DH_check_ex() and EVP_PKEY_param_check().

Also vulnerable are the OpenSSL dhparam and pkeyparam command line applications when using the '-check' option.

The OpenSSL SSL/TLS implementation is not affected by this issue. The OpenSSL 3.0 and 3.1 FIPS providers are not affected by this issue.(CVE-2023-3446)

Initial UEFI bootloader that handles chaining to a trusted full \ bootloader under secure boot environments.

Security Fix(es):

Applications that use a non-default option when verifying certificates may be vulnerable to an attack from a malicious CA to circumvent certain checks.

Invalid certificate policies in leaf certificates are silently ignored by OpenSSL and other certificate policy checks are skipped for that certificate. A malicious CA could use this to deliberately assert invalid certificate policies in order to circumvent policy checking on the certificate altogether.

Policy processing is disabled by default but can be enabled by passing the -policy' argument to the command line utilities or by calling the X509_VERIFY_PARAM_set1_policies()' function.(CVE-2023-0465)

Issue summary: Processing some specially crafted ASN.1 object identifiers or data containing them may be very slow.

Impact summary: Applications that use OBJ_obj2txt() directly, or use any of the OpenSSL subsystems OCSP, PKCS7/SMIME, CMS, CMP/CRMF or TS with no message size limit may experience notable to very long delays when processing those messages, which may lead to a Denial of Service.

An OBJECT IDENTIFIER is composed of a series of numbers - sub-identifiers - most of which have no size limit. OBJ_obj2txt() may be used to translate an ASN.1 OBJECT IDENTIFIER given in DER encoding form (using the OpenSSL type ASN1_OBJECT) to its canonical numeric text form, which are the sub-identifiers of the OBJECT IDENTIFIER in decimal form, separated by periods.

When one of the sub-identifiers in the OBJECT IDENTIFIER is very large (these are sizes that are seen as absurdly large, taking up tens or hundreds of KiBs), the translation to a decimal number in text may take a very long time. The time complexity is O(n^2) with 'n' being the size of the sub-identifiers in bytes (*).

With OpenSSL 3.0, support to fetch cryptographic algorithms using names / identifiers in string form was introduced. This includes using OBJECT IDENTIFIERs in canonical numeric text form as identifiers for fetching algorithms.

Such OBJECT IDENTIFIERs may be received through the ASN.1 structure AlgorithmIdentifier, which is commonly used in multiple protocols to specify what cryptographic algorithm should be used to sign or verify, encrypt or decrypt, or digest passed data.

Applications that call OBJ_obj2txt() directly with untrusted data are affected, with any version of OpenSSL. If the use is for the mere purpose of display, the severity is considered low.

In OpenSSL 3.0 and newer, this affects the subsystems OCSP, PKCS7/SMIME, CMS, CMP/CRMF or TS. It also impacts anything that processes X.509 certificates, including simple things like verifying its signature.

The impact on TLS is relatively low, because all versions of OpenSSL have a 100KiB limit on the peer's certificate chain. Additionally, this only impacts clients, or servers that have explicitly enabled client authentication.

In OpenSSL 1.1.1 and 1.0.2, this only affects displaying diverse objects, such as X.509 certificates. This is assumed to not happen in such a way that it would cause a Denial of Service, so these versions are considered not affected by this issue in such a way that it would be cause for concern, and the severity is therefore considered low.(CVE-2023-2650)

Issue summary: Checking excessively long DH keys or parameters may be very slow.

Impact summary: Applications that use the functions DH_check(), DH_check_ex() or EVP_PKEY_param_check() to check a DH key or DH parameters may experience long delays. Where the key or parameters that are being checked have been obtained from an untrusted source this may lead to a Denial of Service.

The function DH_check() performs various checks on DH parameters. One of those checks confirms that the modulus ('p' parameter) is not too large. Trying to use a very large modulus is slow and…

Initial UEFI bootloader that handles chaining to a trusted full \ bootloader under secure boot environments.

Security Fix(es):

Applications that use a non-default option when verifying certificates may be vulnerable to an attack from a malicious CA to circumvent certain checks.

Invalid certificate policies in leaf certificates are silently ignored by OpenSSL and other certificate policy checks are skipped for that certificate. A malicious CA could use this to deliberately assert invalid certificate policies in order to circumvent policy checking on the certificate altogether.

Policy processing is disabled by default but can be enabled by passing the -policy' argument to the command line utilities or by calling the X509_VERIFY_PARAM_set1_policies()' function.(CVE-2023-0465)

Issue summary: Processing some specially crafted ASN.1 object identifiers or data containing them may be very slow.

Impact summary: Applications that use OBJ_obj2txt() directly, or use any of the OpenSSL subsystems OCSP, PKCS7/SMIME, CMS, CMP/CRMF or TS with no message size limit may experience notable to very long delays when processing those messages, which may lead to a Denial of Service.

An OBJECT IDENTIFIER is composed of a series of numbers - sub-identifiers - most of which have no size limit. OBJ_obj2txt() may be used to translate an ASN.1 OBJECT IDENTIFIER given in DER encoding form (using the OpenSSL type ASN1_OBJECT) to its canonical numeric text form, which are the sub-identifiers of the OBJECT IDENTIFIER in decimal form, separated by periods.

When one of the sub-identifiers in the OBJECT IDENTIFIER is very large (these are sizes that are seen as absurdly large, taking up tens or hundreds of KiBs), the translation to a decimal number in text may take a very long time. The time complexity is O(n^2) with 'n' being the size of the sub-identifiers in bytes (*).

With OpenSSL 3.0, support to fetch cryptographic algorithms using names / identifiers in string form was introduced. This includes using OBJECT IDENTIFIERs in canonical numeric text form as identifiers for fetching algorithms.

Such OBJECT IDENTIFIERs may be received through the ASN.1 structure AlgorithmIdentifier, which is commonly used in multiple protocols to specify what cryptographic algorithm should be used to sign or verify, encrypt or decrypt, or digest passed data.

Applications that call OBJ_obj2txt() directly with untrusted data are affected, with any version of OpenSSL. If the use is for the mere purpose of display, the severity is considered low.

In OpenSSL 3.0 and newer, this affects the subsystems OCSP, PKCS7/SMIME, CMS, CMP/CRMF or TS. It also impacts anything that processes X.509 certificates, including simple things like verifying its signature.

The impact on TLS is relatively low, because all versions of OpenSSL have a 100KiB limit on the peer's certificate chain. Additionally, this only impacts clients, or servers that have explicitly enabled client authentication.

In OpenSSL 1.1.1 and 1.0.2, this only affects displaying diverse objects, such as X.509 certificates. This is assumed to not happen in such a way that it would cause a Denial of Service, so these versions are considered not affected by this issue in such a way that it would be cause for concern, and the severity is therefore considered low.(CVE-2023-2650)

Issue summary: Checking excessively long DH keys or parameters may be very slow.

Impact summary: Applications that use the functions DH_check(), DH_check_ex() or EVP_PKEY_param_check() to check a DH key or DH parameters may experience long delays. Where the key or parameters that are being checked have been obtained from an untrusted source this may lead to a Denial of Service.

The function DH_check() performs various checks on DH parameters. One of those checks confirms that the modulus ('p' parameter) is not too large. Trying to use a very large modulus is slow and…

Initial UEFI bootloader that handles chaining to a trusted full \ bootloader under secure boot environments.

Security Fix(es):

Applications that use a non-default option when verifying certificates may be vulnerable to an attack from a malicious CA to circumvent certain checks.

Invalid certificate policies in leaf certificates are silently ignored by OpenSSL and other certificate policy checks are skipped for that certificate. A malicious CA could use this to deliberately assert invalid certificate policies in order to circumvent policy checking on the certificate altogether.

Policy processing is disabled by default but can be enabled by passing the -policy' argument to the command line utilities or by calling the X509_VERIFY_PARAM_set1_policies()' function.(CVE-2023-0465)

Issue summary: Processing some specially crafted ASN.1 object identifiers or data containing them may be very slow.

Impact summary: Applications that use OBJ_obj2txt() directly, or use any of the OpenSSL subsystems OCSP, PKCS7/SMIME, CMS, CMP/CRMF or TS with no message size limit may experience notable to very long delays when processing those messages, which may lead to a Denial of Service.

An OBJECT IDENTIFIER is composed of a series of numbers - sub-identifiers - most of which have no size limit. OBJ_obj2txt() may be used to translate an ASN.1 OBJECT IDENTIFIER given in DER encoding form (using the OpenSSL type ASN1_OBJECT) to its canonical numeric text form, which are the sub-identifiers of the OBJECT IDENTIFIER in decimal form, separated by periods.

When one of the sub-identifiers in the OBJECT IDENTIFIER is very large (these are sizes that are seen as absurdly large, taking up tens or hundreds of KiBs), the translation to a decimal number in text may take a very long time. The time complexity is O(n^2) with 'n' being the size of the sub-identifiers in bytes (*).

With OpenSSL 3.0, support to fetch cryptographic algorithms using names / identifiers in string form was introduced. This includes using OBJECT IDENTIFIERs in canonical numeric text form as identifiers for fetching algorithms.

Such OBJECT IDENTIFIERs may be received through the ASN.1 structure AlgorithmIdentifier, which is commonly used in multiple protocols to specify what cryptographic algorithm should be used to sign or verify, encrypt or decrypt, or digest passed data.

Applications that call OBJ_obj2txt() directly with untrusted data are affected, with any version of OpenSSL. If the use is for the mere purpose of display, the severity is considered low.

In OpenSSL 3.0 and newer, this affects the subsystems OCSP, PKCS7/SMIME, CMS, CMP/CRMF or TS. It also impacts anything that processes X.509 certificates, including simple things like verifying its signature.

The impact on TLS is relatively low, because all versions of OpenSSL have a 100KiB limit on the peer's certificate chain. Additionally, this only impacts clients, or servers that have explicitly enabled client authentication.

In OpenSSL 1.1.1 and 1.0.2, this only affects displaying diverse objects, such as X.509 certificates. This is assumed to not happen in such a way that it would cause a Denial of Service, so these versions are considered not affected by this issue in such a way that it would be cause for concern, and the severity is therefore considered low.(CVE-2023-2650)

Issue summary: Checking excessively long DH keys or parameters may be very slow.

Impact summary: Applications that use the functions DH_check(), DH_check_ex() or EVP_PKEY_param_check() to check a DH key or DH parameters may experience long delays. Where the key or parameters that are being checked have been obtained from an untrusted source this may lead to a Denial of Service.

The function DH_check() performs various checks on DH parameters. One of those checks confirms that the modulus ('p' parameter) is not too large. Trying to use a very large modulus is slow and…

Initial UEFI bootloader that handles chaining to a trusted full \ bootloader under secure boot environments.

Security Fix(es):

Applications that use a non-default option when verifying certificates may be vulnerable to an attack from a malicious CA to circumvent certain checks.

Invalid certificate policies in leaf certificates are silently ignored by OpenSSL and other certificate policy checks are skipped for that certificate. A malicious CA could use this to deliberately assert invalid certificate policies in order to circumvent policy checking on the certificate altogether.

Policy processing is disabled by default but can be enabled by passing the -policy' argument to the command line utilities or by calling the X509_VERIFY_PARAM_set1_policies()' function.(CVE-2023-0465)

Issue summary: Processing some specially crafted ASN.1 object identifiers or data containing them may be very slow.

Impact summary: Applications that use OBJ_obj2txt() directly, or use any of the OpenSSL subsystems OCSP, PKCS7/SMIME, CMS, CMP/CRMF or TS with no message size limit may experience notable to very long delays when processing those messages, which may lead to a Denial of Service.

An OBJECT IDENTIFIER is composed of a series of numbers - sub-identifiers - most of which have no size limit. OBJ_obj2txt() may be used to translate an ASN.1 OBJECT IDENTIFIER given in DER encoding form (using the OpenSSL type ASN1_OBJECT) to its canonical numeric text form, which are the sub-identifiers of the OBJECT IDENTIFIER in decimal form, separated by periods.

When one of the sub-identifiers in the OBJECT IDENTIFIER is very large (these are sizes that are seen as absurdly large, taking up tens or hundreds of KiBs), the translation to a decimal number in text may take a very long time. The time complexity is O(n^2) with 'n' being the size of the sub-identifiers in bytes (*).

With OpenSSL 3.0, support to fetch cryptographic algorithms using names / identifiers in string form was introduced. This includes using OBJECT IDENTIFIERs in canonical numeric text form as identifiers for fetching algorithms.

Such OBJECT IDENTIFIERs may be received through the ASN.1 structure AlgorithmIdentifier, which is commonly used in multiple protocols to specify what cryptographic algorithm should be used to sign or verify, encrypt or decrypt, or digest passed data.

Applications that call OBJ_obj2txt() directly with untrusted data are affected, with any version of OpenSSL. If the use is for the mere purpose of display, the severity is considered low.

In OpenSSL 3.0 and newer, this affects the subsystems OCSP, PKCS7/SMIME, CMS, CMP/CRMF or TS. It also impacts anything that processes X.509 certificates, including simple things like verifying its signature.

The impact on TLS is relatively low, because all versions of OpenSSL have a 100KiB limit on the peer's certificate chain. Additionally, this only impacts clients, or servers that have explicitly enabled client authentication.

In OpenSSL 1.1.1 and 1.0.2, this only affects displaying diverse objects, such as X.509 certificates. This is assumed to not happen in such a way that it would cause a Denial of Service, so these versions are considered not affected by this issue in such a way that it would be cause for concern, and the severity is therefore considered low.(CVE-2023-2650)

Issue summary: Checking excessively long DH keys or parameters may be very slow.

Impact summary: Applications that use the functions DH_check(), DH_check_ex() or EVP_PKEY_param_check() to check a DH key or DH parameters may experience long delays. Where the key or parameters that are being checked have been obtained from an untrusted source this may lead to a Denial of Service.

The function DH_check() performs various checks on DH parameters. One of those checks confirms that the modulus ('p' parameter) is not too large. Trying to use a very large modulus is slow and…

Initial UEFI bootloader that handles chaining to a trusted full \ bootloader under secure boot environments.

Security Fix(es):

Applications that use a non-default option when verifying certificates may be vulnerable to an attack from a malicious CA to circumvent certain checks.

Invalid certificate policies in leaf certificates are silently ignored by OpenSSL and other certificate policy checks are skipped for that certificate. A malicious CA could use this to deliberately assert invalid certificate policies in order to circumvent policy checking on the certificate altogether.

Policy processing is disabled by default but can be enabled by passing the -policy' argument to the command line utilities or by calling the X509_VERIFY_PARAM_set1_policies()' function.(CVE-2023-0465)

Issue summary: Processing some specially crafted ASN.1 object identifiers or data containing them may be very slow.

Impact summary: Applications that use OBJ_obj2txt() directly, or use any of the OpenSSL subsystems OCSP, PKCS7/SMIME, CMS, CMP/CRMF or TS with no message size limit may experience notable to very long delays when processing those messages, which may lead to a Denial of Service.

An OBJECT IDENTIFIER is composed of a series of numbers - sub-identifiers - most of which have no size limit. OBJ_obj2txt() may be used to translate an ASN.1 OBJECT IDENTIFIER given in DER encoding form (using the OpenSSL type ASN1_OBJECT) to its canonical numeric text form, which are the sub-identifiers of the OBJECT IDENTIFIER in decimal form, separated by periods.

When one of the sub-identifiers in the OBJECT IDENTIFIER is very large (these are sizes that are seen as absurdly large, taking up tens or hundreds of KiBs), the translation to a decimal number in text may take a very long time. The time complexity is O(n^2) with 'n' being the size of the sub-identifiers in bytes (*).

With OpenSSL 3.0, support to fetch cryptographic algorithms using names / identifiers in string form was introduced. This includes using OBJECT IDENTIFIERs in canonical numeric text form as identifiers for fetching algorithms.

Such OBJECT IDENTIFIERs may be received through the ASN.1 structure AlgorithmIdentifier, which is commonly used in multiple protocols to specify what cryptographic algorithm should be used to sign or verify, encrypt or decrypt, or digest passed data.

Applications that call OBJ_obj2txt() directly with untrusted data are affected, with any version of OpenSSL. If the use is for the mere purpose of display, the severity is considered low.

In OpenSSL 3.0 and newer, this affects the subsystems OCSP, PKCS7/SMIME, CMS, CMP/CRMF or TS. It also impacts anything that processes X.509 certificates, including simple things like verifying its signature.

The impact on TLS is relatively low, because all versions of OpenSSL have a 100KiB limit on the peer's certificate chain. Additionally, this only impacts clients, or servers that have explicitly enabled client authentication.

In OpenSSL 1.1.1 and 1.0.2, this only affects displaying diverse objects, such as X.509 certificates. This is assumed to not happen in such a way that it would cause a Denial of Service, so these versions are considered not affected by this issue in such a way that it would be cause for concern, and the severity is therefore considered low.(CVE-2023-2650)

Issue summary: Checking excessively long DH keys or parameters may be very slow.

Impact summary: Applications that use the functions DH_check(), DH_check_ex() or EVP_PKEY_param_check() to check a DH key or DH parameters may experience long delays. Where the key or parameters that are being checked have been obtained from an untrusted source this may lead to a Denial of Service.

The function DH_check() performs various checks on DH parameters. One of those checks confirms that the modulus ('p' parameter) is not too large. Trying to use a very large modulus is slow and…

EDK II is a modern, feature-rich, cross-platform firmware development environment for the UEFI and PI specifications.

Security Fix(es):

A security vulnerability has been identified in all supported versions

of OpenSSL related to the verification of X.509 certificate chains that include policy constraints. Attackers may be able to exploit this vulnerability by creating a malicious certificate chain that triggers exponential use of computational resources, leading to a denial-of-service (DoS) attack on affected systems.

Policy processing is disabled by default but can be enabled by passing the -policy' argument to the command line utilities or by calling the X509_VERIFY_PARAM_set1_policies()' function.(CVE-2023-0464)

Applications that use a non-default option when verifying certificates may be vulnerable to an attack from a malicious CA to circumvent certain checks.

Invalid certificate policies in leaf certificates are silently ignored by OpenSSL and other certificate policy checks are skipped for that certificate. A malicious CA could use this to deliberately assert invalid certificate policies in order to circumvent policy checking on the certificate altogether.

Policy processing is disabled by default but can be enabled by passing the -policy' argument to the command line utilities or by calling the X509_VERIFY_PARAM_set1_policies()' function.(CVE-2023-0465)

The function X509_VERIFY_PARAM_add0_policy() is documented to implicitly enable the certificate policy check when doing certificate verification. However the implementation of the function does not enable the check which allows certificates with invalid or incorrect policies to pass the certificate verification.

As suddenly enabling the policy check could break existing deployments it was decided to keep the existing behavior of the X509_VERIFY_PARAM_add0_policy() function.

Instead the applications that require OpenSSL to perform certificate policy check need to use X509_VERIFY_PARAM_set1_policies() or explicitly enable the policy check by calling X509_VERIFY_PARAM_set_flags() with the X509_V_FLAG_POLICY_CHECK flag argument.

Certificate policy checks are disabled by default in OpenSSL and are not commonly used by applications.(CVE-2023-0466)

Issue summary: Processing some specially crafted ASN.1 object identifiers or data containing them may be very slow.

Impact summary: Applications that use OBJ_obj2txt() directly, or use any of the OpenSSL subsystems OCSP, PKCS7/SMIME, CMS, CMP/CRMF or TS with no message size limit may experience notable to very long delays when processing those messages, which may lead to a Denial of Service.

An OBJECT IDENTIFIER is composed of a series of numbers - sub-identifiers - most of which have no size limit. OBJ_obj2txt() may be used to translate an ASN.1 OBJECT IDENTIFIER given in DER encoding form (using the OpenSSL type ASN1_OBJECT) to its canonical numeric text form, which are the sub-identifiers of the OBJECT IDENTIFIER in decimal form, separated by periods.

When one of the sub-identifiers in the OBJECT IDENTIFIER is very large (these are sizes that are seen as absurdly large, taking up tens or hundreds of KiBs), the translation to a decimal number in text may take a very long time. The time complexity is O(n^2) with 'n' being the size of the sub-identifiers in bytes (*).

With OpenSSL 3.0, support to fetch cryptographic algorithms using names / identifiers in string form was introduced. This includes using OBJECT IDENTIFIERs in canonical numeric text form as identifiers for fetching algorithms.

Such OBJECT IDENTIFIERs may be received through the ASN.1 structure AlgorithmIdentifier, which is commonly used in multiple protocols to specify what cryptographic algorithm should be used to sign or verify, encrypt or decrypt, or digest passed data.

Applications that call OBJ_obj2txt() directly with untrusted data are affected, with any version of OpenSSL.…

OpenSSL is a toolkit that implements the Secure Sockets Layer (SSL) and Transport Layer Security (TLS) protocols, as well as a full-strength general-purpose cryptography library.

Security Fix(es):

• openssl: Excessive time spent checking DH keys and parameters (CVE-2023-3446)

• OpenSSL: Excessive time spent checking DH q parameter value (CVE-2023-3817)

• openssl: Generating excessively long X9.42 DH keys or checking excessively long X9.42 DH keys or parameters may be very slow (CVE-2023-5678)

For more details about the security issue(s), including the impact, a CVSS score, acknowledgments, and other related information, refer to the CVE page(s) listed in the References section.

Issue summary: Checking excessively long DH keys or parameters may be very slow. Impact summary: Applications that use the functions DH_check(), DH_check_ex() or EVP_PKEY_param_check() to check a DH key or DH parameters may experience long delays. Where the key or parameters that are being checked have been obtained from an untrusted source this may lead to a Denial of Service. The function DH_check() performs various checks on DH parameters. One of those checks confirms that the modulus ('p' parameter) is not too large. Trying to use a very large modulus is slow and OpenSSL will not normally use a modulus which is over 10,000 bits in length. However the DH_check() function checks numerous aspects of the key or parameters that have been supplied. Some of those checks use the supplied modulus value even if it has already been found to be too large. An application that calls DH_check() and supplies a key or parameters obtained from an untrusted source could be vulernable to a Denial of Service attack. The function DH_check() is itself called by a number of other OpenSSL functions. An application calling any of those other functions may similarly be affected. The other functions affected by this are DH_check_ex() and EVP_PKEY_param_check(). Also vulnerable are the OpenSSL dhparam and pkeyparam command line applications when using the '-check' option. The OpenSSL SSL/TLS implementation is not affected by this issue. The OpenSSL 3.0 and 3.1 FIPS providers are not affected by this issue.

OpenSSL is a toolkit that implements the Secure Sockets Layer (SSL) and Transport Layer Security (TLS) protocols, as well as a full-strength general-purpose cryptography library.

Security Fix(es):

• openssl: Excessive time spent checking DH keys and parameters (CVE-2023-3446)
• OpenSSL: Excessive time spent checking DH q parameter value (CVE-2023-3817)
• openssl: Generating excessively long X9.42 DH keys or checking excessively long X9.42 DH keys or parameters may be very slow (CVE-2023-5678)

For more details about the security issue(s), including the impact, a CVSS score, acknowledgments, and other related information, refer to the CVE page(s) listed in the References section.

EDK (Embedded Development Kit) is a project to enable UEFI support for Virtual Machines. This package contains a sample 64-bit UEFI firmware for QEMU and KVM.

Security Fix(es):

• openssl: Excessive time spent checking DH keys and parameters (CVE-2023-3446)

For more details about the security issue(s), including the impact, a CVSS score, acknowledgments, and other related information, refer to the CVE page(s) listed in the References section.

EDK (Embedded Development Kit) is a project to enable UEFI support for Virtual Machines. This package contains a sample 64-bit UEFI firmware for QEMU and KVM.

Security Fix(es):

• edk2: Buffer overflow when handling Server ID option from a DHCPv6 proxy Advertise message (CVE-2023-45235)
• EDK2: heap buffer overflow in Tcg2MeasureGptTable() (CVE-2022-36763)
• EDK2: heap buffer overflow in Tcg2MeasurePeImage() (CVE-2022-36764)
• edk2: Integer underflow when processing IA_NA/IA_TA options in a DHCPv6 Advertise message (CVE-2023-45229)
• edk2: Out of Bounds read when handling a ND Redirect message with truncated options (CVE-2023-45231)
• edk2: Infinite loop when parsing unknown options in the Destination Options header (CVE-2023-45232)
• edk2: Infinite loop when parsing a PadN option in the Destination Options header (CVE-2023-45233)
• openssl: Excessive time spent checking DH keys and parameters (CVE-2023-3446)

For more details about the security issue(s), including the impact, a CVSS score, acknowledgments, and other related information, refer to the CVE page(s) listed in the References section.

Additional Changes:

For detailed information on changes in this release, see the AlmaLinux Release Notes linked from the References section.

OpenSSL is a toolkit that implements the Secure Sockets Layer (SSL) and Transport Layer Security (TLS) protocols, as well as a full-strength general-purpose cryptography library.

Security Fix(es):

• openssl: AES-SIV cipher implementation contains a bug that causes it to ignore empty associated data entries (CVE-2023-2975)
• openssl: Excessive time spent checking DH keys and parameters (CVE-2023-3446)
• OpenSSL: Excessive time spent checking DH q parameter value (CVE-2023-3817)
• openssl: Generating excessively long X9.42 DH keys or checking excessively long X9.42 DH keys or parameters may be very slow (CVE-2023-5678)
• openssl: POLY1305 MAC implementation corrupts vector registers on PowerPC (CVE-2023-6129)
• openssl: Excessive time spent checking invalid RSA public keys (CVE-2023-6237)
• openssl: denial of service via null dereference (CVE-2024-0727)

For more details about the security issue(s), including the impact, a CVSS score, acknowledgments, and other related information, refer to the CVE page(s) listed in the References section.

Additional Changes:

For detailed information on changes in this release, see the AlmaLinux Release Notes linked from the References section.

• SECURITY UPDATE: Denial of service could be encountered if a DH key or DH parameters check experience long delays.
  • debian/patches/CVE-2023-3446.patch: Adds check to prevent the testing of an excessively large modulus in DH_check().
  • CVE-2023-3446

• SECURITY UPDATE: Denial of service could be encountered if a DH key or DH parameters check experience long delays.
  • debian/patches/CVE-2023-3446.patch: Adds check to prevent the testing of an excessively large modulus in DH_check().
  • CVE-2023-3446

• CVE-2024-0727: Fix NULL pointer dereference in processing PKCS12 files, preventing potential DoS attack
• CVE-2023-6129: Fix POLY1305 MAC implementation bug that corrupts internal state on PowerPC CPUs with vector instructions
• CVE-2023-5678: Fix issue with excessively long X9.42 DH keys or parameters causing long delays and potential DoS by adding checks in DH_generate_key() and DH_check_pub_key() functions
• CVE-2023-3817: Fix excessively long DH key or parameters check causing potential Denial of Service by preventing unnecessary checks if q is larger than p
• CVE-2023-3446: Fix issue of excessively long DH keys or parameters causing slow checks, leading to potential Denial of Service. Added additional checks to prevent DoS vulnerability in DH_check(), DH_check_ex(), and EVP_PKEY_param_check() functions
• CVE-2023-2975: Fix issue with AES-SIV cipher ignoring empty associated data entries by performing authentication operation for empty data during EVP_EncryptUpdate()

• CVE-2023-5678: Fix that DH_check_pub_key() and DH_generate_key() don't check large modulus
• CVE-2023-3446: Fix that checking excessively long DH keys or parameters may be very slow.

• CVE-2023-5678: Fix that DH_check_pub_key() and DH_generate_key() don't check large modulus
• CVE-2023-3446: Fix that checking excessively long DH keys or parameters may be very slow.

• CVE-2023-3446: fix DH_check() excessive time with over sized modulus

TuxCare rebuilt cryptography to address 1 CVE. Fixed in 3.4.8.post2+tuxcare.

• CVE-2023-3446: fix DH_check() excessive time with over sized modulus
• CVE-2024-4603: fix DSA parameter check excessive time with very large keys
• CVE-2024-4741: fix use-after-free in SSL_free_buffers

• CVE-2024-1298: fix potential UINT32 overflow in S3 ResumeCount that could DoS firmware on resume (EDK2)
• CVE-2024-38796: fix integer overflow in PeCoffLoaderRelocateImage() that could lead to memory corruption (EDK2)
• CVE-2023-2650: fix DoS in OBJ_obj2txt() when parsing OBJECT IDENTIFIERs with very large sub-identifiers (bundled OpenSSL)
• CVE-2023-3446: fix excessive runtime in DH_check() when supplied with over-sized modulus (bundled OpenSSL)
• CVE-2024-0727: fix NULL pointer dereference in PKCS12 ContentInfo handling that could crash applications (bundled OpenSSL)

AES-SIV implementation ignores empty associated data entries. (CVE-2023-2975)

Excessive time spent checking DH keys and parameters. (CVE-2023-3446)

Excessive time spent checking DH q parameter value. (CVE-2023-3817)

The updated packages fix security vulnerabilities:

AES-SIV implementation ignores empty associated data entries. (CVE-2023-2975)

Excessive time spent checking DH keys and parameters. (CVE-2023-3446)

Excessive time spent checking DH q parameter value. (CVE-2023-3817)

These are all security issues fixed in the libopenssl-1_1-devel-1.1.1u-5.1 package on the GA media of openSUSE Tumbleweed.

These are all security issues fixed in the libopenssl-3-devel-3.1.1-3.1 package on the GA media of openSUSE Tumbleweed.

These are all security issues fixed in the libopenssl-1_0_0-devel-1.0.2u-21.1 package on the GA media of openSUSE Tumbleweed.

EDK (Embedded Development Kit) is a project to enable UEFI support for Virtual Machines. This package contains a sample 64-bit UEFI firmware for QEMU and KVM.

Security Fix(es):

• edk2: Buffer overflow when handling Server ID option from a DHCPv6 proxy Advertise message (CVE-2023-45235)

• EDK2: heap buffer overflow in Tcg2MeasureGptTable() (CVE-2022-36763)

• EDK2: heap buffer overflow in Tcg2MeasurePeImage() (CVE-2022-36764)

• edk2: Integer underflow when processing IA_NA/IA_TA options in a DHCPv6 Advertise message (CVE-2023-45229)

• edk2: Out of Bounds read when handling a ND Redirect message with truncated options (CVE-2023-45231)

• edk2: Infinite loop when parsing unknown options in the Destination Options header (CVE-2023-45232)

• edk2: Infinite loop when parsing a PadN option in the Destination Options header (CVE-2023-45233)

• openssl: Excessive time spent checking DH keys and parameters (CVE-2023-3446)

For more details about the security issue(s), including the impact, a CVSS score, acknowledgments, and other related information, refer to the CVE page(s) listed in the References section.

Additional Changes:

For detailed information on changes in this release, see the Rocky Linux 9.4 Release Notes linked from the References section.

This update for openssl-1_1 fixes the following issues:

• CVE-2023-3446: Fixed DH_check() excessive time with over sized modulus (bsc#1213487).

This update for openssl-1_1 fixes the following issues:

• CVE-2023-3446: Fixed DH_check() excessive time with over sized modulus (bsc#1213487).

This update for openssl-1_1 fixes the following issues:

• CVE-2023-3446: Fixed DH_check() excessive time with over sized modulus (bsc#1213487).

This update for openssl-1_1 fixes the following issues:

• CVE-2023-3446: Fixed DH_check() excessive time with over sized modulus (bsc#1213487).

This update for openssl1 fixes the following issues:

• CVE-2023-3446: Fixed DH_check() excessive time with over sized modulus (bsc#1213487).