CVE-2015-8345

The eepro100 emulator in QEMU qemu-kvm blank allows local guest users to cause a denial of service (application crash and infinite loop) via vectors involving the command block list.

A heap-based buffer overflow flaw was discovered in the way QEMU's AMD PC-Net II Ethernet Controller emulation received certain packets in loopback mode. A privileged user (with the CAP_SYS_RAWIO capability) inside a guest could use this flaw to crash the host QEMU process (resulting in denial of service) or, potentially, execute arbitrary code with privileges of the host QEMU process (CVE-2015-7504)

A buffer overflow flaw was found in the way QEMU's AMD PC-Net II emulation validated certain received packets from a remote host in non-loopback mode. A remote, unprivileged attacker could potentially use this flaw to execute arbitrary code on the host with the privileges of the QEMU process. Note that to exploit this flaw, the guest network interface must have a large MTU limit (CVE-2015-7512)

A NULL pointer dereference vulnerability was found in the QEMU emulator built with PCI MSI-X support. Because MSI-X MMIO support did not define the .write method, when the controller tried to write to the pending bit array(PBA) memory region, a segmentation fault occurred. A privileged attacker inside the guest could use this flaw to crash the QEMU process resulting in denial of service (CVE-2015-7549)

An infinite-loop flaw was discovered in the QEMU emulator built with i8255x (PRO100) emulation support. When processing a chain of commands located in the Command Block List(CBL), each Command Block(CB) points to the next command in the list. If the link to the next CB pointed to the same block or if there was a closed loop in the chain, an infinite loop would execute the same command over and over again. A privileged user inside the guest could use this flaw to crash the QEMU instance, resulting in denial of service (CVE-2015-8345).

An arithmetic-exception flaw was found in the QEMU emulator built with VNC display-driver support. The VNC server incorrectly handled 'SetPixelFormat' messages sent from clients. A privileged remote client could use this flaw to crash the guest resulting in denial of service (CVE-2015-8504).

An infinite-loop issue was found in the QEMU emulator built with USB EHCI emulation support. The flaw occurred during communication between the host controller interface(EHCI) and a respective device driver. These two communicate using an isochronous transfer descriptor list(iTD). an infinite loop unfolded if there was a closed loop in the list. A privileged user inside a guest could use this flaw to consume excessive resources and cause denial of service (CVE-2015-8558).

A memory-leak flaw was found in the QEMU emulator built with VMWARE VMXNET3 paravirtual NIC emulator support. The flaw occurred when a guest repeatedly tried to activate the VMXNET3 device. A privileged guest attacker could use this flaw to leak host memory, resulting in denial of service on the host. (CVE-2015-8567, CVE-2015-8568)

A stack buffer-overflow vulnerability has been discovered in the QEMU emulator built with SCSI MegaRAID SAS HBA emulation support. The flaw occurs when processing the SCSI controller's CTRL_GET_INFO command. A privileged guest user could exploit this flaw to crash the QEMU process instance (denial of service). (CVE-2015-8613)

An out-of-bounds write vulnerability has been found in the QEMU emulator built with Human Monitor Interface(HMP) support. The issue occurs when the 'sendkey' command (in hmp_sendkey) is processed with a 'keyname_len' that is greater than the 'keyname_buf' array size. A user or process could exploit this flaw to crash the QEMU process instance (denial of service). (CVE-2015-8619)

Qemu emulator built with the Q35 chipset based pc system emulator is vulnerable to a heap based buffer overflow. It occurs during VM guest migration, as more(8 bytes) data is moved than allocated memory area. A privileged guest user could use this issue to corrupt the VM guest image, potentially leading to a DoS. This issue affects q35 machine types. (CVE-2015-8666)

An out-of-bounds read-write access flaw was found in the…

These are all security issues fixed in the xen-4.7.0_12-1.3 package on the GA media of openSUSE Tumbleweed.

This update fixes the following security issues:

• bsc#956832 - CVE-2015-8345: xen: qemu: net: eepro100: infinite loop in processing command block list

• bsc#956408 - CVE-2015-8339, CVE-2015-8340: xen: XENMEM_exchange error handling issues (XSA-159) xsa159.patch

• bsc#956411 - CVE-2015-7504: xen: heap buffer overflow vulnerability in pcnet emulator (XSA-162)

• bsc#954405 - CVE-2015-8104: Xen: guest to host DoS by triggering an infinite loop in microcode via #DB exception

• bsc#953527 - CVE-2015-5307: kernel: kvm/xen: x86: avoid guest->host DOS by intercepting #AC (XSA-156)

• bsc#950704 - CVE-2015-7970: xen: x86: Long latency populate-on-demand operation is not preemptible (XSA-150)

• bsc#951845 - CVE-2015-7972: xen: x86: populate-on-demand balloon size inaccuracy can crash guests (XSA-153)

• bsc#950703 - CVE-2015-7969: xen: leak of main per-domain vcpu pointer array (DoS) (XSA-149)

• bsc#950705 - CVE-2015-7969: xen: x86: leak of per-domain profiling-related vcpu pointer array (DoS) (XSA-151)

• bsc#950706 - CVE-2015-7971: xen: x86: some pmu and profiling hypercalls log without rate limiting (XSA-152)

This update fixes the following security issues:

• bsc#956832 - CVE-2015-8345: xen: qemu: net: eepro100: infinite loop in processing command block list

• Revert x86/IO-APIC: don't create pIRQ mapping from masked RTE until kernel maintenance release goes out.

• bsc#956592 - xen: virtual PMU is unsupported (XSA-163)

• bsc#956408 - CVE-2015-8339, CVE-2015-8340: xen: XENMEM_exchange error handling issues (XSA-159)

• bsc#956409 - CVE-2015-8341: xen: libxl leak of pv kernel and initrd on error (XSA-160)

• bsc#956411 - CVE-2015-7504: xen: heap buffer overflow vulnerability in pcnet emulator (XSA-162)

• bsc#947165 - CVE-2015-7311: xen: libxl fails to honour readonly flag on disks with qemu-xen (xsa-142)

• bsc#954405 - CVE-2015-8104: Xen: guest to host DoS by triggering an infinite loop in microcode via #DB exception

• bsc#954018 - CVE-2015-5307: xen: x86: CPU lockup during fault delivery (XSA-156)

This update fixes the following security issues:

• bsc#956832 - CVE-2015-8345: xen: qemu: net: eepro100: infinite loop in processing command block list

• bsc#956592 - xen: virtual PMU is unsupported (XSA-163)

• bsc#956408 - CVE-2015-8339, CVE-2015-8340: xen: XENMEM_exchange error handling issues (XSA-159)

• bsc#956409 - CVE-2015-8341: xen: libxl leak of pv kernel and initrd on error (XSA-160)

• bsc#956411 - CVE-2015-7504: xen: heap buffer overflow vulnerability in pcnet emulator (XSA-162)

• bsc#947165 - CVE-2015-7311: xen: libxl fails to honour readonly flag on disks with qemu-xen (xsa-142)

• bsc#954405 - CVE-2015-8104: Xen: guest to host DoS by triggering an infinite loop in microcode via #DB exception

• bsc#954018 - CVE-2015-5307: xen: x86: CPU lockup during fault delivery (XSA-156)

• bsc#950704 - CVE-2015-7970: xen: x86: Long latency populate-on-demand operation is not preemptible (XSA-150)

• bsc#951845 - CVE-2015-7972: xen: x86: populate-on-demand balloon size inaccuracy can crash guests (XSA-153)

• bsc#950703 - CVE-2015-7969: xen: leak of main per-domain vcpu pointer array (DoS) (XSA-149)

• bsc#950705 - CVE-2015-7969: xen: x86: leak of per-domain profiling-related vcpu pointer array (DoS) (XSA-151)

• bsc#950706 - CVE-2015-7971: xen: x86: some pmu and profiling hypercalls log without rate limiting (XSA-152)

This update fixes the following security issues:

• bsc#956832 - CVE-2015-8345: xen: qemu: net: eepro100: infinite loop in processing command block list

• bsc#956592 - xen: virtual PMU is unsupported (XSA-163)

• bsc#956408 - CVE-2015-8339, CVE-2015-8340: xen: XENMEM_exchange error handling issues (XSA-159)

• bsc#956409 - CVE-2015-8341: xen: libxl leak of pv kernel and initrd on error (XSA-160)

• bsc#956411 - CVE-2015-7504: xen: heap buffer overflow vulnerability in pcnet emulator (XSA-162)

• bsc#947165 - CVE-2015-7311: xen: libxl fails to honour readonly flag on disks with qemu-xen (xsa-142)

• bsc#954405 - CVE-2015-8104: Xen: guest to host DoS by triggering an infinite loop in microcode via #DB exception

• bsc#954018 - CVE-2015-5307: xen: x86: CPU lockup during fault delivery (XSA-156) CVE-2015-5307-xsa156.patch

• bsc#950704 - CVE-2015-7970: xen: x86: Long latency populate-on-demand operation is not preemptible (XSA-150) 563212c9-x86-PoD-Eager-sweep-for-zeroed-pages.patch

• bsc#951845 - CVE-2015-7972: xen: x86: populate-on-demand balloon size inaccuracy can crash guests (XSA-153) xsa153-libxl.patch xend-xsa153.patch

• Drop 5604f239-x86-PV-properly-populate-descriptor-tables.patch

• bsc#950703 - CVE-2015-7969: xen: leak of main per-domain vcpu pointer array (DoS) (XSA-149)

• bsc#950705 - CVE-2015-7969: xen: x86: leak of per-domain profiling-related vcpu pointer array (DoS) (XSA-151)

• bsc#950706 - CVE-2015-7971: xen: x86: some pmu and profiling hypercalls log without rate limiting (XSA-152)

  This update fixes the following security issues:

• bsc#955399 - Fix xm migrate --log_progress. Due to logic error progress was not logged when requested.

• bsc#956832 - CVE-2015-8345: xen: qemu: net: eepro100: infinite loop in processing command block list

• bsc#956592 - xen: virtual PMU is unsupported (XSA-163)

• bsc#956408 - CVE-2015-8339, CVE-2015-8340: xen: XENMEM_exchange error handling issues (XSA-159)

• bsc#956409 - CVE-2015-8341: xen: libxl leak of pv kernel and initrd on error (XSA-160)

• bsc#956411 - CVE-2015-7504: xen: heap buffer overflow vulnerability in pcnet emulator (XSA-162)

• bsc#947165 - CVE-2015-7311: xen: libxl fails to honour readonly flag on disks with qemu-xen (xsa-142)

• bsc#955399 - Fix xm migrate --live. The options were not passed due to a merge error. As a result the migration was not live, instead the suspended guest was migrated.

• bsc#954405 - CVE-2015-8104: Xen: guest to host DoS by triggering an infinite loop in microcode via #DB exception

• bsc#954018 - CVE-2015-5307: xen: x86: CPU lockup during fault delivery (XSA-156)

• bsc#950704 - CVE-2015-7970: xen: x86: Long latency populate-on-demand operation is not preemptible (XSA-150)

• bsc#951845 - CVE-2015-7972: xen: x86: populate-on-demand balloon size inaccuracy can crash guests (XSA-153)

• Drop 5604f239-x86-PV-properly-populate-descriptor-tables.patch

• bsc#950703 - CVE-2015-7969: xen: leak of main per-domain vcpu pointer array (DoS) (XSA-149)

• bsc#950705 - CVE-2015-7969: xen: x86: leak of per-domain profiling-related vcpu pointer array (DoS) (XSA-151)

• bsc#950706 - CVE-2015-7971: xen: x86: some pmu and profiling hypercalls log without rate limiting (XSA-152)

This update for kvm fixes the following issues:

Security issues fixed:

• CVE-2015-7512: The receive packet size is now checked in the emulated pcnet driver, eliminating buffer overflow and potential security issue by malicious guest systems. (bsc#957162)
• CVE-2015-8345: A infinite loop in processing command block list was fixed that could be exploit by malicious guest systems (bsc#956829).

Other bugs fixed:

• To assist users past the migration incompatibility discussed in bsc#950590 (restore migration compatibility with SLE11 SP3 and SLE12, at the unfortunate expense to prior SLE11 SP4 kvm release compatability when a virtio-net device is used), print a message which references the support document TID 7017048. See https://www.suse.com/support/kb/doc.php?id=7017048
• Fix cases of wrong clock values in kvmclock timekeeping (bsc#947164 and bsc#953187)
• Enforce pxe rom sizes to ensure migration compatibility. (bsc#950590)
• Fix kvm live migration fails between sles11 sp3 and sp4 (bsc#950590)

This update for kvm fixes the following issues:

Security issues fixed:

• CVE-2015-7512: The receive packet size is now checked in the emulated pcnet driver, eliminating buffer overflow and potential security issue by malicious guest systems. (bsc#957162)
• CVE-2015-8345: A infinite loop in processing command block list was fixed that could be exploit by malicious guest systems (bsc#956829).

Bugs fixed:

• Fix cases of wrong clock values in kvmclock timekeeping (bsc#947164 and bsc#953187)
• Enforce pxe rom sizes to ensure migration compatibility. (bsc#950590)

This update fixes the following security issues:

• Enforce receive packet size, thus eliminating buffer overflow and potential security issue. (bsc#957162 CVE-2015-7512)
• Infinite loop in processing command block list. CVE-2015-8345 (bsc#956829):

Also a non-security bug fixed:

• Fix cases of wrong clock values in kvmclock timekeeping (bsc#947164 and bsc#953187)

This update fixes the following security issues:

• Enforce receive packet size, thus eliminating buffer overflow and potential security issue. (bsc#957162 CVE-2015-7512)
• Infinite loop in processing command block list. CVE-2015-8345 (bsc#956829):

This update also fixes a non-security bug:

• Due to space restrictions in limited bios data areas, don't create mptable if vcpu count is 'high' (ie more than ~19). (bsc#954864) (No supported guests are negatively impacted by this change, which is taken from upstream seabios)

xen was updated to fix 44 security issues.

These security issues were fixed:

• CVE-2013-4533: Buffer overflow in the pxa2xx_ssp_load function in hw/arm/pxa2xx.c allowed remote attackers to cause a denial of service or possibly execute arbitrary code via a crafted s->rx_level value in a savevm image (bsc#864655).
• CVE-2013-4534: Buffer overflow in hw/intc/openpic.c allowed remote attackers to cause a denial of service or possibly execute arbitrary code via vectors related to IRQDest elements (bsc#864811).
• CVE-2013-4537: The ssi_sd_transfer function in hw/sd/ssi-sd.c allowed remote attackers to execute arbitrary code via a crafted arglen value in a savevm image (bsc#864391).
• CVE-2013-4538: Multiple buffer overflows in the ssd0323_load function in hw/display/ssd0323.c allowed remote attackers to cause a denial of service (memory corruption) or possibly execute arbitrary code via crafted (1) cmd_len, (2) row, or (3) col values; (4) row_start and row_end values; or (5) col_star and col_end values in a savevm image (bsc#864769).
• CVE-2013-4539: Multiple buffer overflows in the tsc210x_load function in hw/input/tsc210x.c might have allowed remote attackers to execute arbitrary code via a crafted (1) precision, (2) nextprecision, (3) function, or (4) nextfunction value in a savevm image (bsc#864805).
• CVE-2014-0222: Integer overflow in the qcow_open function in block/qcow.c allowed remote attackers to cause a denial of service (crash) via a large L2 table in a QCOW version 1 image (bsc#877642).
• CVE-2014-3640: The sosendto function in slirp/udp.c allowed local users to cause a denial of service (NULL pointer dereference) by sending a udp packet with a value of 0 in the source port and address, which triggers access of an uninitialized socket (bsc#897654).
• CVE-2014-3689: The vmware-vga driver (hw/display/vmware_vga.c) allowed local guest users to write to qemu memory locations and gain privileges via unspecified parameters related to rectangle handling (bsc#901508).
• CVE-2014-7815: The set_pixel_format function in ui/vnc.c allowed remote attackers to cause a denial of service (crash) via a small bytes_per_pixel value (bsc#902737).
• CVE-2014-9718: The (1) BMDMA and (2) AHCI HBA interfaces in the IDE functionality had multiple interpretations of a function's return value, which allowed guest OS users to cause a host OS denial of service (memory consumption or infinite loop, and system crash) via a PRDT with zero complete sectors, related to the bmdma_prepare_buf and ahci_dma_prepare_buf functions (bsc#928393).
• CVE-2015-1779: The VNC websocket frame decoder allowed remote attackers to cause a denial of service (memory and CPU consumption) via a large (1) websocket payload or (2) HTTP headers section (bsc#924018).
• CVE-2015-5278: Infinite loop in ne2000_receive() function (bsc#945989).
• CVE-2015-6855: hw/ide/core.c did not properly restrict the commands accepted by an ATAPI device, which allowed guest users to cause a denial of service or possibly have unspecified other impact via certain IDE commands, as demonstrated by a WIN_READ_NATIVE_MAX command to an empty drive, which triggers a divide-by-zero error and instance crash (bsc#945404).
• CVE-2015-7512: Buffer overflow in the pcnet_receive function in hw/net/pcnet.c, when a guest NIC has a larger MTU, allowed remote attackers to cause a denial of service (guest OS crash) or execute arbitrary code via a large packet (bsc#957162).
• CVE-2015-7549: pci: NULL pointer dereference issue (bsc#958917).
• CVE-2015-8345: eepro100: infinite loop in processing command block list (bsc#956829).
• CVE-2015-8504: VNC: floating point exception (bsc#958491).
• CVE-2015-8550: Paravirtualized drivers were incautious about shared memory contents (XSA-155) (bsc#957988).
• CVE-2015-8554: qemu-dm buffer overrun in MSI-X handling (XSA-164) (bsc#958007).
• CVE-2015-8555: Information leak in legacy x86 FPU/XMM initialization (XSA-165) (bsc#958009).
• CVE-2015-8558: Infinite loop in…

xen was updated to fix 47 security issues.

These security issues were fixed:

• CVE-2013-4527: Buffer overflow in hw/timer/hpet.c might have allowed remote attackers to execute arbitrary code via vectors related to the number of timers (bnc#864673).
• CVE-2013-4529: Buffer overflow in hw/pci/pcie_aer.c allowed remote attackers to cause a denial of service and possibly execute arbitrary code via a large log_num value in a savevm image (bnc#864678).
• CVE-2013-4530: Buffer overflow in hw/ssi/pl022.c allowed remote attackers to cause a denial of service or possibly execute arbitrary code via crafted tx_fifo_head and rx_fifo_head values in a savevm image (bnc#864682).
• CVE-2013-4533: Buffer overflow in the pxa2xx_ssp_load function in hw/arm/pxa2xx.c allowed remote attackers to cause a denial of service or possibly execute arbitrary code via a crafted s->rx_level value in a savevm image (bsc#864655).
• CVE-2013-4534: Buffer overflow in hw/intc/openpic.c allowed remote attackers to cause a denial of service or possibly execute arbitrary code via vectors related to IRQDest elements (bsc#864811).
• CVE-2013-4537: The ssi_sd_transfer function in hw/sd/ssi-sd.c allowed remote attackers to execute arbitrary code via a crafted arglen value in a savevm image (bsc#864391).
• CVE-2013-4538: Multiple buffer overflows in the ssd0323_load function in hw/display/ssd0323.c allowed remote attackers to cause a denial of service (memory corruption) or possibly execute arbitrary code via crafted (1) cmd_len, (2) row, or (3) col values; (4) row_start and row_end values; or (5) col_star and col_end values in a savevm image (bsc#864769).
• CVE-2013-4539: Multiple buffer overflows in the tsc210x_load function in hw/input/tsc210x.c might have allowed remote attackers to execute arbitrary code via a crafted (1) precision, (2) nextprecision, (3) function, or (4) nextfunction value in a savevm image (bsc#864805).
• CVE-2014-0222: Integer overflow in the qcow_open function in block/qcow.c allowed remote attackers to cause a denial of service (crash) via a large L2 table in a QCOW version 1 image (bsc#877642).
• CVE-2014-3640: The sosendto function in slirp/udp.c allowed local users to cause a denial of service (NULL pointer dereference) by sending a udp packet with a value of 0 in the source port and address, which triggers access of an uninitialized socket (bsc#897654).
• CVE-2014-3689: The vmware-vga driver (hw/display/vmware_vga.c) allowed local guest users to write to qemu memory locations and gain privileges via unspecified parameters related to rectangle handling (bsc#901508).
• CVE-2014-7815: The set_pixel_format function in ui/vnc.c allowed remote attackers to cause a denial of service (crash) via a small bytes_per_pixel value (bsc#902737).
• CVE-2014-9718: The (1) BMDMA and (2) AHCI HBA interfaces in the IDE functionality had multiple interpretations of a function's return value, which allowed guest OS users to cause a host OS denial of service (memory consumption or infinite loop, and system crash) via a PRDT with zero complete sectors, related to the bmdma_prepare_buf and ahci_dma_prepare_buf functions (bsc#928393).
• CVE-2015-1779: The VNC websocket frame decoder allowed remote attackers to cause a denial of service (memory and CPU consumption) via a large (1) websocket payload or (2) HTTP headers section (bsc#924018).
• CVE-2015-5278: Infinite loop in ne2000_receive() function (bsc#945989).
• CVE-2015-6855: hw/ide/core.c did not properly restrict the commands accepted by an ATAPI device, which allowed guest users to cause a denial of service or possibly have unspecified other impact via certain IDE commands, as demonstrated by a WIN_READ_NATIVE_MAX command to an empty drive, which triggers a divide-by-zero error and instance crash (bsc#945404).
• CVE-2015-7512: Buffer overflow in the pcnet_receive function in hw/net/pcnet.c, when a guest NIC has a larger MTU, allowed remote attackers to cause a denial of service (guest OS crash) or execute…

xen was updated to fix 46 security issues.

These security issues were fixed:

• CVE-2013-4527: Buffer overflow in hw/timer/hpet.c might have allowed remote attackers to execute arbitrary code via vectors related to the number of timers (bsc#964746).
• CVE-2013-4529: Buffer overflow in hw/pci/pcie_aer.c allowed remote attackers to cause a denial of service and possibly execute arbitrary code via a large log_num value in a savevm image (bsc#964929).
• CVE-2013-4530: Buffer overflow in hw/ssi/pl022.c allowed remote attackers to cause a denial of service or possibly execute arbitrary code via crafted tx_fifo_head and rx_fifo_head values in a savevm image (bsc#964950).
• CVE-2013-4533: Buffer overflow in the pxa2xx_ssp_load function in hw/arm/pxa2xx.c allowed remote attackers to cause a denial of service or possibly execute arbitrary code via a crafted s->rx_level value in a savevm image (bsc#964644).
• CVE-2013-4534: Buffer overflow in hw/intc/openpic.c allowed remote attackers to cause a denial of service or possibly execute arbitrary code via vectors related to IRQDest elements (bsc#964452).
• CVE-2013-4537: The ssi_sd_transfer function in hw/sd/ssi-sd.c allowed remote attackers to execute arbitrary code via a crafted arglen value in a savevm image (bsc#962642).
• CVE-2013-4538: Multiple buffer overflows in the ssd0323_load function in hw/display/ssd0323.c allowed remote attackers to cause a denial of service (memory corruption) or possibly execute arbitrary code via crafted (1) cmd_len, (2) row, or (3) col values; (4) row_start and row_end values; or (5) col_star and col_end values in a savevm image (bsc#962335).
• CVE-2013-4539: Multiple buffer overflows in the tsc210x_load function in hw/input/tsc210x.c might have allowed remote attackers to execute arbitrary code via a crafted (1) precision, (2) nextprecision, (3) function, or (4) nextfunction value in a savevm image (bsc#962758).
• CVE-2014-0222: Integer overflow in the qcow_open function in block/qcow.c allowed remote attackers to cause a denial of service (crash) via a large L2 table in a QCOW version 1 image (bsc#964925).
• CVE-2014-3640: The sosendto function in slirp/udp.c allowed local users to cause a denial of service (NULL pointer dereference) by sending a udp packet with a value of 0 in the source port and address, which triggers access of an uninitialized socket (bsc#965112).
• CVE-2014-3689: The vmware-vga driver (hw/display/vmware_vga.c) allowed local guest users to write to qemu memory locations and gain privileges via unspecified parameters related to rectangle handling (bsc#962611).
• CVE-2014-7815: The set_pixel_format function in ui/vnc.c allowed remote attackers to cause a denial of service (crash) via a small bytes_per_pixel value (bsc#962627).
• CVE-2014-9718: The (1) BMDMA and (2) AHCI HBA interfaces in the IDE functionality had multiple interpretations of a function's return value, which allowed guest OS users to cause a host OS denial of service (memory consumption or infinite loop, and system crash) via a PRDT with zero complete sectors, related to the bmdma_prepare_buf and ahci_dma_prepare_buf functions (bsc#964431).
• CVE-2015-1779: The VNC websocket frame decoder allowed remote attackers to cause a denial of service (memory and CPU consumption) via a large (1) websocket payload or (2) HTTP headers section (bsc#962632).
• CVE-2015-5278: Infinite loop in ne2000_receive() function (bsc#964947).
• CVE-2015-6855: hw/ide/core.c did not properly restrict the commands accepted by an ATAPI device, which allowed guest users to cause a denial of service or possibly have unspecified other impact via certain IDE commands, as demonstrated by a WIN_READ_NATIVE_MAX command to an empty drive, which triggers a divide-by-zero error and instance crash (bsc#965156).
• CVE-2015-7512: Buffer overflow in the pcnet_receive function in hw/net/pcnet.c, when a guest NIC has a larger MTU, allowed remote attackers to cause a denial of service (guest OS crash) or execute…

xen was updated to fix 36 security issues.

These security issues were fixed:

• CVE-2013-4527: Buffer overflow in hw/timer/hpet.c might have allowed remote attackers to execute arbitrary code via vectors related to the number of timers (bnc#864673).
• CVE-2013-4529: Buffer overflow in hw/pci/pcie_aer.c allowed remote attackers to cause a denial of service and possibly execute arbitrary code via a large log_num value in a savevm image (bnc#864678).
• CVE-2013-4530: Buffer overflow in hw/ssi/pl022.c allowed remote attackers to cause a denial of service or possibly execute arbitrary code via crafted tx_fifo_head and rx_fifo_head values in a savevm image (bnc#864682).
• CVE-2013-4533: Buffer overflow in the pxa2xx_ssp_load function in hw/arm/pxa2xx.c allowed remote attackers to cause a denial of service or possibly execute arbitrary code via a crafted s->rx_level value in a savevm image (bsc#864655).
• CVE-2013-4534: Buffer overflow in hw/intc/openpic.c allowed remote attackers to cause a denial of service or possibly execute arbitrary code via vectors related to IRQDest elements (bsc#864811).
• CVE-2013-4537: The ssi_sd_transfer function in hw/sd/ssi-sd.c allowed remote attackers to execute arbitrary code via a crafted arglen value in a savevm image (bsc#864391).
• CVE-2013-4538: Multiple buffer overflows in the ssd0323_load function in hw/display/ssd0323.c allowed remote attackers to cause a denial of service (memory corruption) or possibly execute arbitrary code via crafted (1) cmd_len, (2) row, or (3) col values; (4) row_start and row_end values; or (5) col_star and col_end values in a savevm image (bsc#864769).
• CVE-2013-4539: Multiple buffer overflows in the tsc210x_load function in hw/input/tsc210x.c might have allowed remote attackers to execute arbitrary code via a crafted (1) precision, (2) nextprecision, (3) function, or (4) nextfunction value in a savevm image (bsc#864805).
• CVE-2014-0222: Integer overflow in the qcow_open function in block/qcow.c allowed remote attackers to cause a denial of service (crash) via a large L2 table in a QCOW version 1 image (bsc#877642).
• CVE-2014-3640: The sosendto function in slirp/udp.c allowed local users to cause a denial of service (NULL pointer dereference) by sending a udp packet with a value of 0 in the source port and address, which triggers access of an uninitialized socket (bsc#897654).
• CVE-2014-3689: The vmware-vga driver (hw/display/vmware_vga.c) allowed local guest users to write to qemu memory locations and gain privileges via unspecified parameters related to rectangle handling (bsc#901508).
• CVE-2014-7815: The set_pixel_format function in ui/vnc.c allowed remote attackers to cause a denial of service (crash) via a small bytes_per_pixel value (bsc#902737).
• CVE-2014-9718: The (1) BMDMA and (2) AHCI HBA interfaces in the IDE functionality had multiple interpretations of a function's return value, which allowed guest OS users to cause a host OS denial of service (memory consumption or infinite loop, and system crash) via a PRDT with zero complete sectors, related to the bmdma_prepare_buf and ahci_dma_prepare_buf functions (bsc#928393).
• CVE-2015-5278: Infinite loop in ne2000_receive() function (bsc#945989).
• CVE-2015-6855: hw/ide/core.c did not properly restrict the commands accepted by an ATAPI device, which allowed guest users to cause a denial of service or possibly have unspecified other impact via certain IDE commands, as demonstrated by a WIN_READ_NATIVE_MAX command to an empty drive, which triggers a divide-by-zero error and instance crash (bsc#945404).
• CVE-2015-7512: Buffer overflow in the pcnet_receive function in hw/net/pcnet.c, when a guest NIC has a larger MTU, allowed remote attackers to cause a denial of service (guest OS crash) or execute arbitrary code via a large packet (bsc#957162).
• CVE-2015-8345: eepro100: infinite loop in processing command block list (bsc#956829).
• CVE-2015-8504: VNC: floating point exception (bsc#958491). -…

Jason Wang discovered that QEMU incorrectly handled the virtio-net device. A remote attacker could use this issue to cause guest network consumption, resulting in a denial of service. (CVE-2015-7295)

Qinghao Tang and Ling Liu discovered that QEMU incorrectly handled the pcnet driver when used in loopback mode. A malicious guest could use this issue to cause a denial of service, or possibly execute arbitrary code on the host as the user running the QEMU process. In the default installation, when QEMU is used with libvirt, attackers would be isolated by the libvirt AppArmor profile. (CVE-2015-7504)

Ling Liu and Jason Wang discovered that QEMU incorrectly handled the pcnet driver. A remote attacker could use this issue to cause a denial of service, or possibly execute arbitrary code on the host as the user running the QEMU process. In the default installation, when QEMU is used with libvirt, attackers would be isolated by the libvirt AppArmor profile. (CVE-2015-7512)

Qinghao Tang discovered that QEMU incorrectly handled the eepro100 driver. A malicious guest could use this issue to cause an infinite loop, leading to a denial of service. (CVE-2015-8345)