CVE-2022-3924

This issue can affect BIND 9 resolvers with stale-answer-enable yes; that also make use of the option stale-answer-client-timeout, configured with a value greater than zero.

If the resolver receives many queries that require recursion, there will be a corresponding increase in the number of clients that are waiting for recursion to complete. If there are sufficient clients already waiting when a new client query is received so that it is necessary to SERVFAIL the longest waiting client (see BIND 9 ARM recursive-clients limit and soft quota), then it is possible for a race to occur between providing a stale answer to this older client and sending an early timeout SERVFAIL, which may cause an assertion failure. This issue affects BIND 9 versions 9.16.12 through 9.16.36, 9.18.0 through 9.18.10, 9.19.0 through 9.19.8, and 9.16.12-S1 through 9.16.36-S1.

BIND (Berkeley Internet Name Domain) is an implementation of the DNS (Domain Name System) protocols. BIND includes a DNS server (named), which resolves host names to IP addresses; a resolver library (routines for applications to use when interfacing with DNS); and tools for verifying that the DNS server is operating properly.

Security Fix(es):

Sending a flood of dynamic DNS updates may cause named to allocate large amounts of memory. This, in turn, may cause named to exit due to a lack of free memory. We are not aware of any cases where this has been exploited. Memory is allocated prior to the checking of access permissions (ACLs) and is retained during the processing of a dynamic update from a client whose access credentials are accepted. Memory allocated to clients that are not permitted to send updates is released immediately upon rejection. The scope of this vulnerability is limited therefore to trusted clients who are permitted to make dynamic zone changes. If a dynamic update is REFUSED, memory will be released again very quickly. Therefore it is only likely to be possible to degrade or stop named by sending a flood of unaccepted dynamic updates comparable in magnitude to a query flood intended to achieve the same detrimental outcome. BIND 9.11 and earlier branches are also affected, but through exhaustion of internal resources rather than memory constraints. This may reduce performance but should not be a significant problem for most servers. Therefore we don't intend to address this for BIND versions prior to BIND 9.16. This issue affects BIND 9 versions 9.16.0 through 9.16.36, 9.18.0 through 9.18.10, 9.19.0 through 9.19.8, and 9.16.8-S1 through 9.16.36-S1.(CVE-2022-3094)

BIND 9 resolver can crash when stale cache and stale answers are enabled, option stale-answer-client-timeout is set to a positive integer, and the resolver receives an RRSIG query. This issue affects BIND 9 versions 9.16.12 through 9.16.36, 9.18.0 through 9.18.10, 9.19.0 through 9.19.8, and 9.16.12-S1 through 9.16.36-S1.(CVE-2022-3736)

This issue can affect BIND 9 resolvers with stale-answer-enable yes; that also make use of the option stale-answer-client-timeout, configured with a value greater than zero. If the resolver receives many queries that require recursion, there will be a corresponding increase in the number of clients that are waiting for recursion to complete. If there are sufficient clients already waiting when a new client query is received so that it is necessary to SERVFAIL the longest waiting client (see BIND 9 ARM recursive-clients limit and soft quota), then it is possible for a race to occur between providing a stale answer to this older client and sending an early timeout SERVFAIL, which may cause an assertion failure. This issue affects BIND 9 versions 9.16.12 through 9.16.36, 9.18.0 through 9.18.10, 9.19.0 through 9.19.8, and 9.16.12-S1 through 9.16.36-S1.(CVE-2022-3924)

BIND (Berkeley Internet Name Domain) is an implementation of the DNS (Domain Name System) protocols. BIND includes a DNS server (named), which resolves host names to IP addresses; a resolver library (routines for applications to use when interfacing with DNS); and tools for verifying that the DNS server is operating properly.

Security Fix(es):

Sending a flood of dynamic DNS updates may cause named to allocate large amounts of memory. This, in turn, may cause named to exit due to a lack of free memory. We are not aware of any cases where this has been exploited. Memory is allocated prior to the checking of access permissions (ACLs) and is retained during the processing of a dynamic update from a client whose access credentials are accepted. Memory allocated to clients that are not permitted to send updates is released immediately upon rejection. The scope of this vulnerability is limited therefore to trusted clients who are permitted to make dynamic zone changes. If a dynamic update is REFUSED, memory will be released again very quickly. Therefore it is only likely to be possible to degrade or stop named by sending a flood of unaccepted dynamic updates comparable in magnitude to a query flood intended to achieve the same detrimental outcome. BIND 9.11 and earlier branches are also affected, but through exhaustion of internal resources rather than memory constraints. This may reduce performance but should not be a significant problem for most servers. Therefore we don't intend to address this for BIND versions prior to BIND 9.16. This issue affects BIND 9 versions 9.16.0 through 9.16.36, 9.18.0 through 9.18.10, 9.19.0 through 9.19.8, and 9.16.8-S1 through 9.16.36-S1.(CVE-2022-3094)

BIND 9 resolver can crash when stale cache and stale answers are enabled, option stale-answer-client-timeout is set to a positive integer, and the resolver receives an RRSIG query. This issue affects BIND 9 versions 9.16.12 through 9.16.36, 9.18.0 through 9.18.10, 9.19.0 through 9.19.8, and 9.16.12-S1 through 9.16.36-S1.(CVE-2022-3736)

This issue can affect BIND 9 resolvers with stale-answer-enable yes; that also make use of the option stale-answer-client-timeout, configured with a value greater than zero. If the resolver receives many queries that require recursion, there will be a corresponding increase in the number of clients that are waiting for recursion to complete. If there are sufficient clients already waiting when a new client query is received so that it is necessary to SERVFAIL the longest waiting client (see BIND 9 ARM recursive-clients limit and soft quota), then it is possible for a race to occur between providing a stale answer to this older client and sending an early timeout SERVFAIL, which may cause an assertion failure. This issue affects BIND 9 versions 9.16.12 through 9.16.36, 9.18.0 through 9.18.10, 9.19.0 through 9.19.8, and 9.16.12-S1 through 9.16.36-S1.(CVE-2022-3924)

This issue can affect BIND 9 resolvers with stale-answer-enable yes; that also make use of the option stale-answer-client-timeout, configured with a value greater than zero. If the resolver receives many queries that require recursion, there will be a corresponding increase in the number of clients that are waiting for recursion to complete. If there are sufficient clients already waiting when a new client query is received so that it is necessary to SERVFAIL the longest waiting client (see BIND 9 ARM recursive-clients limit and soft quota), then it is possible for a race to occur between providing a stale answer to this older client and sending an early timeout SERVFAIL, which may cause an assertion failure. This issue affects BIND 9 versions 9.16.12 through 9.16.36, 9.18.0 through 9.18.10, 9.19.0 through 9.19.8, and 9.16.12-S1 through 9.16.36-S1.

The Berkeley Internet Name Domain (BIND) is an implementation of the Domain Name System (DNS) protocols. BIND includes a DNS server (named); a resolver library (routines for applications to use when interfacing with DNS); and tools for verifying that the DNS server is operating correctly.

Security Fix(es):

• bind: processing large delegations may severely degrade resolver performance (CVE-2022-2795)
• bind: flooding with UPDATE requests may lead to DoS (CVE-2022-3094)
• bind: sending specific queries to the resolver may cause a DoS (CVE-2022-3736)
• bind: sending specific queries to the resolver may cause a DoS (CVE-2022-3924)

For more details about the security issue(s), including the impact, a CVSS score, acknowledgments, and other related information, refer to the CVE page(s) listed in the References section.

Additional Changes:

For detailed information on changes in this release, see the AlmaLinux Release Notes linked from the References section.

The Berkeley Internet Name Domain (BIND) is an implementation of the Domain Name System (DNS) protocols. BIND includes a DNS server (named); a resolver library (routines for applications to use when interfacing with DNS); and tools for verifying that the DNS server is operating correctly.

Security Fix(es):

• bind: processing large delegations may severely degrade resolver performance (CVE-2022-2795)
• bind: flooding with UPDATE requests may lead to DoS (CVE-2022-3094)
• bind: sending specific queries to the resolver may cause a DoS (CVE-2022-3736)
• bind: sending specific queries to the resolver may cause a DoS (CVE-2022-3924)

For more details about the security issue(s), including the impact, a CVSS score, acknowledgments, and other related information, refer to the CVE page(s) listed in the References section.

Additional Changes:

For detailed information on changes in this release, see the AlmaLinux Release Notes linked from the References section.

This issue can affect BIND 9 resolvers with stale-answer-enable yes; that also make use of the option stale-answer-client-timeout, configured with a value greater than zero. If the resolver receives many queries that require recursion, there will be a corresponding increase in the number of clients that are waiting for recursion to complete. If there are sufficient clients already waiting when a new client query is received so that it is necessary to SERVFAIL the longest waiting client (see BIND 9 ARM recursive-clients limit and soft quota), then it is possible for a race to occur between providing a stale answer to this older client and sending an early timeout SERVFAIL, which may cause an assertion failure. This issue affects BIND 9 versions 9.16.12 through 9.16.36, 9.18.0 through 9.18.10, 9.19.0 through 9.19.8, and 9.16.12-S1 through 9.16.36-S1.

These are all security issues fixed in the bind-9.18.11-1.1 package on the GA media of openSUSE Tumbleweed.

This update for bind fixes the following issues:

• Updated to version 9.16.37 (jsc#SLE-24600):
  • CVE-2022-3094: Fixed an issue where a message flood could exhaust all available memory (bsc#1207471).
  • CVE-2022-3736: Fixed a potential crash upon receiving an RRSIG in configurations with stale cache and stale answers enabled and stale-answer-client-timeout set to a positive value (bsc#1207473).
  • CVE-2022-3924: Fixed a potential crash upon reaching the recursive-clients soft quota in configurations with stale answers enabled and stale-answer-client-timeout set to a positive value (bsc#1207475).

Rob Schulhof discovered that Bind incorrectly handled a large number of UPDATE messages. A remote attacker could possibly use this issue to cause Bind to consume resources, resulting in a denial of service. (CVE-2022-3094)

Borja Marcos discovered that Bind incorrectly handled certain RRSIG queries. A remote attacker could possibly use this issue to cause Bind to crash, resulting in a denial of service. This issue only affected Ubuntu 22.04 LTS and Ubuntu 22.10. (CVE-2022-3736)

Maksym Odinintsev discovered that Bind incorrectly handled certain answers from stale cache. A remote attacker could possibly use this issue to cause Bind to crash, resulting in a denial of service. This issue only affected Ubuntu 22.04 LTS and Ubuntu 22.10. (CVE-2022-3924)